Indexable Drill

Sort by
Picture of TUNGALOY TIS320F40-3 32mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS320F40-3 32mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS320F40-3

$682.75
Picture of TUNGALOY TIS310F32-3 31mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS310F32-3 31mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS310F32-3

$682.75
Picture of INGERSOLL QR0280112JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0280112JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0280112JFR00

$682.27
Picture of INGERSOLL QR0270108JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270108JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270108JFR00

$682.27
Picture of INGERSOLL QR0302120N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0302120N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0302120N6R02

$682.27
Picture of INGERSOLL QR0294118N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0294118N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0294118N6R02

$682.27
Picture of INGERSOLL QR0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0286114N6R02

$682.27
Picture of INGERSOLL QR0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0278111N6R02

$682.27
Picture of INGERSOLL QR0270108N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270108N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270108N6R02

$682.27
Picture of INGERSOLL QR0262105N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0262105N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0262105N6R02

$682.27
Picture of INGERSOLL QR0260104JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0260104JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0260104JFR00

$682.27
Picture of INGERSOLL QR0300120JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0300120JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0300120JGR00

$682.27
Picture of INGERSOLL QR0290116JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0290116JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0290116JGR00

$682.27
Picture of TUNGALOY TIDU0787R1000-12 0.787" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0787R1000-12 0.787" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0787R1000-12

$679.10
Picture of TUNGALOY TIDU0748R1000-12 0.748" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0748R1000-12 0.748" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0748R1000-12

$679.10
Picture of TUNGALOY TID200R25-12 20mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID200R25-12 20mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID200R25-12

$679.10
Picture of TUNGALOY TID190R25-12 19mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID190R25-12 19mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID190R25-12

$679.10
Picture of TUNGALOY TDSU1062F-3 1.062" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1062F-3 1.062" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1062F-3

$678.00
Picture of TUNGALOY TDSU1000F-3 1" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1000F-3 1" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1000F-3

$678.00
Picture of TUNGALOY TDS270F32-3 27mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS270F32-3 27mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS270F32-3

$678.00
Picture of TUNGALOY TDS265F32-3 26.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS265F32-3 26.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS265F32-3

$678.00
Picture of TUNGALOY TDS264F32-3 26.4mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS264F32-3 26.4mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS264F32-3

$678.00
Picture of TUNGALOY TDS260F25-3 26mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS260F25-3 26mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS260F25-3

$678.00
Picture of TUNGALOY TDS255F25-3 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS255F25-3 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS255F25-3

$678.00
Picture of TUNGALOY TDSU0937F-4 0.938" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU0937F-4 0.938" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU0937F-4

$675.95
Picture of TUNGALOY TDS255F25-4 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS255F25-4 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS255F25-4

$675.95
Picture of TUNGALOY TDS250F25-4 25mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS250F25-4 25mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS250F25-4

$675.95
Picture of TUNGALOY TDS240F25-4 24mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS240F25-4 24mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS240F25-4

$675.95
Picture of TUNGALOY TDS230F25-4 23mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS230F25-4 23mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS230F25-4

$675.95
Picture of ISCAR MD-DFN 1378 HEAD 1.378" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1378 HEAD 1.378" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1378 HEAD

$675.84
Picture of ISCAR MD-DFN 1339 HEAD 1.339" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1339 HEAD 1.339" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1339 HEAD

$675.84
Picture of ISCAR MD-DFN 1299 HEAD 1.299" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1299 HEAD 1.299" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1299 HEAD

$675.84
Picture of TUNGALOY TDXU-0937FS-04 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0937FS-04 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0937FS-04

$675.50
Picture of TUNGALOY TDXU-1000FS-04 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1000FS-04 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1000FS-04

$675.50
Picture of TUNGALOY TDX250F25-4 25mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX250F25-4 25mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX250F25-4

$675.50
Picture of TUNGALOY TDX245F25-4 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX245F25-4 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX245F25-4

$675.50
Picture of TUNGALOY TDX240F25-4 24mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX240F25-4 24mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX240F25-4

$675.50
Picture of TUNGALOY TDX235F25-4 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX235F25-4 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX235F25-4

$675.50
Picture of TUNGALOY TDX230F25-4 23mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX230F25-4 23mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX230F25-4

$675.50
Picture of INGERSOLL LD2700135N6R01 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

INGERSOLL LD2700135N6R01 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

ISO: LD2700135N6R01

$674.80
Picture of INGERSOLL LD2600130N6R01 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

INGERSOLL LD2600130N6R01 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

ISO: LD2600130N6R01

$674.80
Picture of INGERSOLL LD3500105N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500105N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500105N6R01

$674.80
Picture of INGERSOLL LD3400102N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400102N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400102N6R01

$674.80
Picture of INGERSOLL LD3300099N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300099N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300099N6R01

$674.80
Picture of INGERSOLL LD3200096N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

INGERSOLL LD3200096N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

ISO: LD3200096N6R01

$674.80
Picture of INGERSOLL LD3100093N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

INGERSOLL LD3100093N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

ISO: LD3100093N6R01

$674.80
Picture of INGERSOLL LD3500105JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500105JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500105JHR00

$674.80
Picture of INGERSOLL LD3400102JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400102JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400102JHR00

$674.80
Picture of INGERSOLL LD3300099JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300099JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300099JHR00

$674.80
Picture of INGERSOLL LD3200096JHR00 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

INGERSOLL LD3200096JHR00 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

ISO: LD3200096JHR00

$674.80
Picture of INGERSOLL LD3100093JGR00 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

INGERSOLL LD3100093JGR00 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

ISO: LD3100093JGR00

$674.80
Picture of INGERSOLL LD2700135JGR00 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

INGERSOLL LD2700135JGR00 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

ISO: LD2700135JGR00

$674.80
Picture of INGERSOLL QR0405081N6R02 1.594 (40.49 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0405081N6R02 1.594 (40.49 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0405081N6R02

$674.80
Picture of INGERSOLL QR0397079N6R02 1.562 (39.67 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0397079N6R02 1.562 (39.67 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0397079N6R02

$674.80
Picture of INGERSOLL QR0389078N6R02 1.531 (38.89 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0389078N6R02 1.531 (38.89 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0389078N6R02

$674.80
Picture of INGERSOLL QR0381076N6R02 1.500 (38.10 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0381076N6R02 1.500 (38.10 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0381076N6R02

$674.80
Picture of INGERSOLL QR0373075N6R02 1.468 (37.29 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0373075N6R02 1.468 (37.29 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0373075N6R02

$674.80
Picture of INGERSOLL QR0400080JGR00 1.575 (40.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0400080JGR00 1.575 (40.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0400080JGR00

$674.80
Picture of INGERSOLL QR0390078JGR00 1.535 (39.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0390078JGR00 1.535 (39.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0390078JGR00

$674.80
Picture of INGERSOLL QR0380076JGR00 1.496 (38.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0380076JGR00 1.496 (38.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0380076JGR00

$674.80
Picture of INGERSOLL QR0370074JGR00 1.457 (37.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0370074JGR00 1.457 (37.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0370074JGR00

$674.80
Picture of INGERSOLL LD2600130JGR00 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

INGERSOLL LD2600130JGR00 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

ISO: LD2600130JGR00

$674.80
Picture of INGERSOLL LD2500125N6R01 0.9843 (25.0 mm)-1.0200 (25.9 mm) SpadeTwist Body

INGERSOLL LD2500125N6R01 0.9843 (25.0 mm)-1.0200 (25.9 mm) SpadeTwist Body

ISO: LD2500125N6R01

$673.87
Picture of INGERSOLL Q0222089N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0222089N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0222089N5R02

$673.87
Picture of INGERSOLL Q0230092N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0230092N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0230092N6R01

$673.87
Picture of INGERSOLL LD2500125JGR00 0.9843 (25.0 mm)-1.0197 (25.9 mm) SpadeTwist Body

INGERSOLL LD2500125JGR00 0.9843 (25.0 mm)-1.0197 (25.9 mm) SpadeTwist Body

ISO: LD2500125JGR00

$673.87
Picture of INGERSOLL Q0250100N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0250100N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0250100N6R01

$673.87
Picture of INGERSOLL Q0254102N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0254102N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0254102N6R01

$673.87
Picture of INGERSOLL Q0246098N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0246098N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0246098N6R01

$673.87
Picture of INGERSOLL Q0238095N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0238095N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0238095N6R01

$673.87
Picture of INGERSOLL Q0206082N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0206082N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0206082N5R01

$673.87
Picture of INGERSOLL Q0214086N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0214086N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0214086N5R02

$673.87
Picture of ISCAR DR1437-2875-150-12-2D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1437-2875-150-12-2D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1437-2875-150-12-2D-N

$672.96
Picture of ISCAR DR1375-2750-150-12-2D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1375-2750-150-12-2D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1375-2750-150-12-2D-N

$672.96
Picture of INGERSOLL Q0333067N6R01 1.312 (33.32 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0333067N6R01 1.312 (33.32 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0333067N6R01

$672.93
Picture of INGERSOLL Q0325065N6R01 1.281 (32.54 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0325065N6R01 1.281 (32.54 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0325065N6R01

$672.93
Picture of INGERSOLL Q0318063N6R01 1.252 (31.80 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0318063N6R01 1.252 (31.80 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0318063N6R01

$672.93
Picture of INGERSOLL Q0310062N6R01 1.219 (30.96 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0310062N6R01 1.219 (30.96 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0310062N6R01

$672.93
Picture of WIDIA/KENNAMETAL TDM0945R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0945R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

$671.40
Picture of WIDIA/KENNAMETAL TDM0906R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0906R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

$671.40
Picture of WIDIA/KENNAMETAL TDM240R8SCF25M TDM1 SCF Drill BODY 8XD D=24.0

WIDIA/KENNAMETAL TDM240R8SCF25M TDM1 SCF Drill BODY 8XD D=24.0

$671.40
Picture of WIDIA/KENNAMETAL TDM230R8SCF25M TDM1 SCF Drill BODY 8XD D=23.0

WIDIA/KENNAMETAL TDM230R8SCF25M TDM1 SCF Drill BODY 8XD D=23.0

$671.40
Picture of INGERSOLL TD2500125B7R01 0.9843 (25.0 mm)-1.0197 (25.9 mm) GoldTwist Body

INGERSOLL TD2500125B7R01 0.9843 (25.0 mm)-1.0197 (25.9 mm) GoldTwist Body

ISO: TD2500125B7R01

$671.07
Picture of INGERSOLL TD2500125JGR00 0.9843 (25.0 mm)-1.0197 (25.9 mm) GoldTwist Body

INGERSOLL TD2500125JGR00 0.9843 (25.0 mm)-1.0197 (25.9 mm) GoldTwist Body

ISO: TD2500125JGR00

$671.07
Picture of ISCAR DFN 1535-460-125A-3D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1535-460-125A-3D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1535-460-125A-3D-IQ

$670.08
Picture of ISCAR DCN 0827-661-100A-8D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0827-661-100A-8D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0827-661-100A-8D

$670.08
Picture of ISCAR DCN 0866-693-100A-8D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0866-693-100A-8D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0866-693-100A-8D

$670.08
Picture of TUNGALOY TISU1181F1250-3 1.181" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1181F1250-3 1.181" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1181F1250-3

$669.25
Picture of TUNGALOY TISU1142F1250-3 1.142" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1142F1250-3 1.142" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1142F1250-3

$669.25
Picture of TUNGALOY TISU1102F1250-3 1.102" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1102F1250-3 1.102" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1102F1250-3

$669.25
Picture of TUNGALOY TIS300F32-3 30mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS300F32-3 30mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS300F32-3

$669.25
Picture of TUNGALOY TIS290F32-3 29mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS290F32-3 29mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS290F32-3

$669.25
Picture of TUNGALOY TIS280F32-3 28mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS280F32-3 28mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS280F32-3

$669.25
Picture of ISCAR DR1312-3936-125-09-3D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1312-3936-125-09-3D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1312-3936-125-09-3D-N

$669.12
Picture of ISCAR DR1281-3843-125-09-3D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1281-3843-125-09-3D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1281-3843-125-09-3D-N

$669.12
Picture of ISCAR DR1250-3750-125-09-3D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1250-3750-125-09-3D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1250-3750-125-09-3D-N

$669.12
Picture of ISCAR DR1219-3657-125-09-3D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1219-3657-125-09-3D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1219-3657-125-09-3D-N

$669.12
Picture of ISCAR DCN 0945-756-125R-8D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0945-756-125R-8D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0945-756-125R-8D

$668.16
Picture of ISCAR DCN 0906-724-125R-8D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0906-724-125R-8D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0906-724-125R-8D

$668.16
Picture of WIDIA/KENNAMETAL TDMX1103R5SL125 TDMX Drill BODY D1.103 5XD SL

WIDIA/KENNAMETAL TDMX1103R5SL125 TDMX Drill BODY D1.103 5XD SL

$667.44
Picture of WIDIA/KENNAMETAL TDMX1063R5SL125 TDMX Drill BODY D1.063 5XD SL

WIDIA/KENNAMETAL TDMX1063R5SL125 TDMX Drill BODY D1.063 5XD SL

$667.44
Picture of WIDIA/KENNAMETAL TDMX280R5SL32M TDMX Drill BODY D=28MM 5XD SL

WIDIA/KENNAMETAL TDMX280R5SL32M TDMX Drill BODY D=28MM 5XD SL

$667.44
Picture of WIDIA/KENNAMETAL TDMX270R5SL32M TDMX Drill BODY D=27MM 5XD SL

WIDIA/KENNAMETAL TDMX270R5SL32M TDMX Drill BODY D=27MM 5XD SL

$667.44
Picture of INGERSOLL QR0225115JFR00 0.886 (22.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0225115JFR00 0.886 (22.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0225115JFR00

$667.33
Picture of INGERSOLL QR0250125N6R02 0.984 (24.99 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250125N6R02 0.984 (24.99 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250125N6R02

$667.33
Picture of INGERSOLL QR0254127N6R02 1.000 (25.40 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0254127N6R02 1.000 (25.40 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0254127N6R02

$667.33
Picture of INGERSOLL QR0246123N6R02 0.969 (24.61 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0246123N6R02 0.969 (24.61 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0246123N6R02

$667.33
Picture of INGERSOLL QR0238119N6R02 0.937 (23.80 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0238119N6R02 0.937 (23.80 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0238119N6R02

$667.33
Picture of INGERSOLL QR0230115N6R02 0.906 (23.01 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230115N6R02 0.906 (23.01 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230115N6R02

$667.33
Picture of INGERSOLL QR0222111N5R02 0.875 (22.23 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0222111N5R02 0.875 (22.23 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0222111N5R02

$667.33
Picture of INGERSOLL QR0214107N5R02 0.843 (21.41 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0214107N5R02 0.843 (21.41 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0214107N5R02

$667.33
Picture of INGERSOLL QR0206103N5R02 0.813 (20.65 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0206103N5R02 0.813 (20.65 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0206103N5R02

$667.33
Picture of INGERSOLL QR0215110JFR00 0.847 (21.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0215110JFR00 0.847 (21.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0215110JFR00

$667.33
Picture of INGERSOLL QR0250125JFR00 0.984 (25.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250125JFR00 0.984 (25.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250125JFR00

$667.33
Picture of INGERSOLL QR0240120JFR00 0.945 (24.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0240120JFR00 0.945 (24.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0240120JFR00

$667.33
Picture of INGERSOLL QR0230115JFR00 0.906 (23.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230115JFR00 0.906 (23.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230115JFR00

$667.33
Picture of INGERSOLL QR0220110JFR00 0.866 (22.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0220110JFR00 0.866 (22.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0220110JFR00

$667.33
Picture of INGERSOLL QR0210105JFR00 0.827 (21.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0210105JFR00 0.827 (21.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0210105JFR00

$667.33
Picture of INGERSOLL Q0198099N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0198099N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0198099N5R01

$666.40
Picture of INGERSOLL Q0191095N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0191095N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0191095N5R01

$666.40
Picture of INGERSOLL Q0183091N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0183091N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0183091N5R01

$666.40
Picture of INGERSOLL Q0175087N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0175087N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0175087N5R01

$666.40
Picture of INGERSOLL Q0167083N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0167083N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0167083N5R01

$666.40
Picture of INGERSOLL Q0159080N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0159080N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0159080N5R01

$666.40
Picture of TUNGALOY TDSU1187-03 1.187" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1187-03 1.187" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1187-03

$665.05
Picture of TUNGALOY TDSU1125-03 1-1/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1125-03 1-1/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1125-03

$665.05
Picture of TUNGALOY TDS305F32-3 30.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS305F32-3 30.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS305F32-3

$665.05
Picture of TUNGALOY TDS295F32-3 29.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS295F32-3 29.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS295F32-3

$665.05
Picture of TUNGALOY TDS285F32-3 28.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS285F32-3 28.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS285F32-3

$665.05
Picture of TUNGALOY TDSU1125F32-3 28.6mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1125F32-3 28.6mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1125F32-3

$665.05
Picture of TUNGALOY TDS300F32-3 30mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS300F32-3 30mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS300F32-3

$665.05
Picture of TUNGALOY TDS290F32-3 29mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS290F32-3 29mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS290F32-3

$665.05
Picture of TUNGALOY TDS280F32-3 28mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS280F32-3 28mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS280F32-3

$665.05
Picture of TUNGALOY TDS275F32-3 27.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS275F32-3 27.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS275F32-3

$665.05
Picture of TUNGALOY TDXU-1187FS-03 1.187" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1187FS-03 1.187" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1187FS-03

$664.80
Picture of TUNGALOY TDXU-1062FS-03 1.062" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1062FS-03 1.062" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1062FS-03

$664.80
Picture of TUNGALOY TDXU-1125FS-03 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1125FS-03 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1125FS-03

$664.80
Picture of TUNGALOY TDX300F32-3 30mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX300F32-3 30mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX300F32-3

$664.80
Picture of TUNGALOY TDX290F32-3 29mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX290F32-3 29mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX290F32-3

$664.80
Picture of TUNGALOY TDX280F32-3 28mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX280F32-3 28mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX280F32-3

$664.80
Picture of TUNGALOY TDX270F32-3 27mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX270F32-3 27mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX270F32-3

$664.80
Picture of TUNGALOY TDX260F25-3 26mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX260F25-3 26mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX260F25-3

$664.80
Picture of TUNGALOY TDX255F25-3 25.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX255F25-3 25.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX255F25-3

$664.80
Picture of ISCAR DCN 1181-354-150A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1181-354-150A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1181-354-150A-3D

$664.32
Picture of ISCAR DCN 1142-342-150A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1142-342-150A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1142-342-150A-3D

$664.32
Picture of ISCAR DCN 1181-354-125A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1181-354-125A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1181-354-125A-3D

$664.32
Picture of ISCAR DCN 1142-342-125A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1142-342-125A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1142-342-125A-3D

$664.32
Picture of TUNGALOY TIDU0945F1250-5 0.945" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0945F1250-5 0.945" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0945F1250-5

$664.30
Picture of TUNGALOY TIDU0906F1250-5 0.906" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0906F1250-5 0.906" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0906F1250-5

$664.30
Picture of TUNGALOY TID240F32-5 24mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID240F32-5 24mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID240F32-5

$664.30
Picture of TUNGALOY TID230F32-5 23mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID230F32-5 23mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID230F32-5

$664.30
Picture of ISCAR DCM 0984-787-100A-8D 0.984 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0984-787-100A-8D 0.984 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0984-787-100A-8D

$663.36
Picture of ISCAR DCN 1102-551-125R-5D 1.102" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 1102-551-125R-5D 1.102" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 1102-551-125R-5D

$661.44
Picture of ISCAR DCN 1063-531-125R-5D 1.063" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 1063-531-125R-5D 1.063" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 1063-531-125R-5D

$661.44
Picture of INGERSOLL LD2200176N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200176N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200176N5R01

$658.93
Picture of INGERSOLL LD2100168N5R01 0.8268 (21.0 mm)-0.8662 (22.0 mm) SpadeTwist Body

INGERSOLL LD2100168N5R01 0.8268 (21.0 mm)-0.8662 (22.0 mm) SpadeTwist Body

ISO: LD2100168N5R01

$658.93
Picture of INGERSOLL LD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200176JFR00

$658.93
Picture of INGERSOLL LD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100168JFR00

$658.93
Picture of INGERSOLL Q0270081N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0270081N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0270081N6R01

$655.20
Picture of INGERSOLL Q0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0278083N6R02

$655.20
Picture of INGERSOLL Q0302090N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0302090N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0302090N6R01

$655.20
Picture of INGERSOLL Q0294088N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0294088N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0294088N6R01

$655.20
Picture of INGERSOLL Q0262079N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0262079N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0262079N6R01

$655.20
Picture of INGERSOLL TD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200176JFR00

$654.27
Picture of INGERSOLL TD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100168JFR00

$654.27
Picture of INGERSOLL TD2200176C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200176C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200176C8R01

$654.27
Picture of INGERSOLL TD2100168C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100168C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100168C8R01

$654.27
Picture of INGERSOLL TD2400192S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400192S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400192S9R01

$652.40
Picture of INGERSOLL TD2300184S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300184S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300184S9R01

$652.40
Picture of WIDIA/KENNAMETAL TDMX1182R3SL125 TDMX Drill BODY D1.182 3XD SL

WIDIA/KENNAMETAL TDMX1182R3SL125 TDMX Drill BODY D1.182 3XD SL

$650.48
Picture of WIDIA/KENNAMETAL TDMX1142R3SL125 TDMX Drill BODY D1.142 3XD SL

WIDIA/KENNAMETAL TDMX1142R3SL125 TDMX Drill BODY D1.142 3XD SL

$650.48
Picture of WIDIA/KENNAMETAL TDMX300R3SL32M TDMX Drill BODY D=30MM 3XD SL

WIDIA/KENNAMETAL TDMX300R3SL32M TDMX Drill BODY D=30MM 3XD SL

$650.48
Picture of WIDIA/KENNAMETAL TDMX290R3SL32M TDMX Drill BODY D=29MM 3XD SL

WIDIA/KENNAMETAL TDMX290R3SL32M TDMX Drill BODY D=29MM 3XD SL

$650.48
Picture of INGERSOLL QR0365073N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0365073N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0365073N6R02

$647.73
Picture of INGERSOLL QR0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0357071N6R02

$647.73
Picture of INGERSOLL QR0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0349070N6R02

$647.73
Picture of INGERSOLL QR0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0341068N6R02

$647.73
Picture of INGERSOLL QR0360072JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0360072JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0360072JGR00

$647.73
Picture of INGERSOLL QR0350070JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0350070JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0350070JGR00

$647.73
Picture of INGERSOLL QR0340068JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0340068JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0340068JGR00

$647.73
Picture of TUNGALOY TDSU0875F-4 7/8" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU0875F-4 7/8" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU0875F-4

$645.00
Picture of TUNGALOY TDS225F25-4 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS225F25-4 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS225F25-4

$645.00
Picture of TUNGALOY TDS220F25-4 22mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS220F25-4 22mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS220F25-4

$645.00
Picture of TUNGALOY TDS215F25-4 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS215F25-4 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS215F25-4

$645.00
Picture of TUNGALOY TDS210F25-4 21mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS210F25-4 21mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS210F25-4

$645.00
Picture of TUNGALOY TDXU-0875FS-04 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0875FS-04 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0875FS-04

$644.70
Picture of TUNGALOY TDXU-0812FS-04 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0812FS-04 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0812FS-04

$644.70
Picture of TUNGALOY TDX220F25-4 22mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX220F25-4 22mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX220F25-4

$644.70
Picture of TUNGALOY TDX215F25-4 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX215F25-4 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX215F25-4

$644.70
Picture of TUNGALOY TDX210F25-4 21mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX210F25-4 21mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX210F25-4

$644.70
Picture of INGERSOLL QR0333100N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0333100N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0333100N6R02

$644.00
Picture of INGERSOLL QR0325098N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0325098N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0325098N6R02

$644.00
Picture of INGERSOLL QR0318095N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0318095N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0318095N6R02

$644.00
Picture of INGERSOLL QR0330099JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0330099JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0330099JGR00

$644.00
Picture of INGERSOLL QR0320096JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0320096JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0320096JGR00

$644.00
Picture of INGERSOLL QR0305092JGR00 1.201 (30.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0305092JGR00 1.201 (30.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0305092JGR00

$644.00
Picture of INGERSOLL QR0310093N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310093N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310093N6R02

$644.00
Picture of INGERSOLL QR0310093JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310093JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310093JGR00

$644.00
Picture of TUNGALOY TDSU1062F-2 1.062" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDSU1062F-2 1.062" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDSU1062F-2

$642.65
Picture of TUNGALOY TDSU1000F-2 1" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDSU1000F-2 1" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDSU1000F-2

$642.65