Cutting Tools

Sort by
Picture of ARNO ROUSE HSA 2020L-SA1603-26 Stick Tool Clamp Down Left Hand

ARNO ROUSE HSA 2020L-SA1603-26 Stick Tool Clamp Down Left Hand

ANSI: HSA 2020L-SA1603-26

ISO: HSA 2020L-SA1603-26

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020R-SA24025-44 Stick Tool Clamp Down Right Hand

ARNO ROUSE HSA 2020R-SA24025-44 Stick Tool Clamp Down Right Hand

ANSI: HSA 2020R-SA24025-44

ISO: HSA 2020R-SA24025-44

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020L-SA24025-44 Stick Tool Clamp Down Left Hand

ARNO ROUSE HSA 2020L-SA24025-44 Stick Tool Clamp Down Left Hand

ANSI: HSA 2020L-SA24025-44

ISO: HSA 2020L-SA24025-44

Call (262) 251-4020 for pricing
Picture of AWARD BV-206A-CB DIA 1/8 SH 0.50 LOC 1.50 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BV-206A-CB DIA 1/8 SH 0.50 LOC 1.50 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BT-309-CB DIA 3/16 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BT-309-CB DIA 3/16 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BR-405-CB DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BR-405-CB DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BO-307-CB DIA 3/16 SH 0.50 LOC 1.7500 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BO-307-CB DIA 3/16 SH 0.50 LOC 1.7500 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BO-306-CBTIALN DIA 3/16 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BO-306-CBTIALN DIA 3/16 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ISCAR PDACR 12-3S-JHP Turning Stick Tool 55.0° Insert 0.750 Square

ISCAR PDACR 12-3S-JHP Turning Stick Tool 55.0° Insert 0.750 Square

ANSI: PDACR 12-3S-JHP

ISO: PDACR 12-3S-JHP

Call (262) 251-4020 for pricing
Picture of YG-1 68445 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 68445 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

Call (262) 251-4020 for pricing
Picture of YG-1 68439 DIA 1-1/4 SH 0.7500 LOC 2.00 OAL 4.50 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 68439 DIA 1-1/4 SH 0.7500 LOC 2.00 OAL 4.50 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

Call (262) 251-4020 for pricing
Picture of STERLING Edge SEF 750-900-100 Milling Cutter Ball Mill

STERLING Edge SEF 750-900-100 Milling Cutter Ball Mill

ANSI: SEF 750-900-100

ISO: SEF 750-900-100

Call (262) 251-4020 for pricing
Picture of YG-1 DH406140 14.00MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406140 14.00MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406139 13.90MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406139 13.90MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406138 13.80MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406138 13.80MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406137 13.70MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406137 13.70MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406136 13.60MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406136 13.60MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406135 13.50MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406135 13.50MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406134 13.40MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406134 13.40MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406133 13.30MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406133 13.30MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406132 13.20MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406132 13.20MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406131 13.10MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406131 13.10MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406130 13.00MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406130 13.00MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406129 12.90MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406129 12.90MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406128 12.80MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406128 12.80MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406126 12.60MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406126 12.60MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406125 12.50MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406125 12.50MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406124 12.40MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406124 12.40MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406123 12.30MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406123 12.30MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406122 12.20MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406122 12.20MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406121 12.10MM Carbide Dream Drill W/ Coolant (3XD) - Metric

YG-1 DH406121 12.10MM Carbide Dream Drill W/ Coolant (3XD) - Metric

Call (262) 251-4020 for pricing
Picture of YG-1 DH406032F 12.70MM Carbide Dream Drill W/ Coolant (3XD)

YG-1 DH406032F 12.70MM Carbide Dream Drill W/ Coolant (3XD)

Call (262) 251-4020 for pricing
Picture of YG-1 DH406031F 31/64 Carbide Dream Drill W/ Coolant (3XD)

YG-1 DH406031F 31/64 Carbide Dream Drill W/ Coolant (3XD)

Call (262) 251-4020 for pricing
Picture of TUNGALOY S20R-CTFPR16 Boring Bar Triangle Insert Posi,F style, 91deg Approach , Steel Round 0.787 Shank

TUNGALOY S20R-CTFPR16 Boring Bar Triangle Insert Posi,F style, 91deg Approach , Steel Round 0.787 Shank

ANSI: S20R-CTFPR16

ISO: S20R-CTFPR16

Call (262) 251-4020 for pricing
Picture of TUNGALOY S20R-CTFPL16 Boring Bar Triangle Insert Posi,F style, 91deg Approach , Steel Round 0.787 Shank

TUNGALOY S20R-CTFPL16 Boring Bar Triangle Insert Posi,F style, 91deg Approach , Steel Round 0.787 Shank

ANSI: S20R-CTFPL16

ISO: S20R-CTFPL16

Call (262) 251-4020 for pricing
Picture of TUNGALOY S20R-CSKPR09 Boring Bar Square Insert Posi,K style, 75deg Approach , Steel Round 0.787 Shank

TUNGALOY S20R-CSKPR09 Boring Bar Square Insert Posi,K style, 75deg Approach , Steel Round 0.787 Shank

ANSI: S20R-CSKPR09

ISO: S20R-CSKPR09

Call (262) 251-4020 for pricing
Picture of YG-1 DPP447140 14.00MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

YG-1 DPP447140 14.00MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

Call (262) 251-4020 for pricing
Picture of YG-1 DPP447135 13.50MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

YG-1 DPP447135 13.50MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

Call (262) 251-4020 for pricing
Picture of YG-1 DPP447130 13.00MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

YG-1 DPP447130 13.00MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

Call (262) 251-4020 for pricing
Picture of YG-1 DPP447127 12.70MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

YG-1 DPP447127 12.70MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

Call (262) 251-4020 for pricing
Picture of YG-1 DPP447125 12.50MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

YG-1 DPP447125 12.50MM Dream Drill Flat Bottom Drill W/O Coolant Hole (2XD)

Call (262) 251-4020 for pricing
Picture of AWARD BM0-203-COTIN DIA 1/8 SH 0.1875 LOC 0.7500 OAL 2.00 End Mill Taper Flute Carbide TiN Single End Ball Nose

AWARD BM0-203-COTIN DIA 1/8 SH 0.1875 LOC 0.7500 OAL 2.00 End Mill Taper Flute Carbide TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BK-303-CBTIALN DIA 3/16 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BK-303-CBTIALN DIA 3/16 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BK-203-CBTIALN DIA 1/8 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BK-203-CBTIALN DIA 1/8 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD B45-202-CBTIALN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD B45-202-CBTIALN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020R-SA2403-32 Stick Tool Clamp Down Right Hand

ARNO ROUSE HSA 2020R-SA2403-32 Stick Tool Clamp Down Right Hand

ANSI: HSA 2020R-SA2403-32

ISO: HSA 2020R-SA2403-32

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020L-SA2403-32 Stick Tool Clamp Down Left Hand

ARNO ROUSE HSA 2020L-SA2403-32 Stick Tool Clamp Down Left Hand

ANSI: HSA 2020L-SA2403-32

ISO: HSA 2020L-SA2403-32

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020R-SA2403-32-.750 Stick Tool Clamp Down Right Hand

ARNO ROUSE HSA 2020R-SA2403-32-.750 Stick Tool Clamp Down Right Hand

ANSI: HSA 2020R-SA2403-32-.750

ISO: HSA 2020R-SA2403-32-.750

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE HSA 2020L-SA2403-32-.750 Stick Tool Clamp Down Left Hand

ARNO ROUSE HSA 2020L-SA2403-32-.750 Stick Tool Clamp Down Left Hand

ANSI: HSA 2020L-SA2403-32-.750

ISO: HSA 2020L-SA2403-32-.750

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM05005HC00ERQCM DIA 1/2 SH 0.50 LOC 2.7500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

SWIFTCARB XM05005HC00ERQCM DIA 1/2 SH 0.50 LOC 2.7500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of AWARD BM-1209 DIA 3/4 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BM-1209 DIA 3/4 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ISCAR SD D1.50-H187D-SP17 IC908 DIA 37.80MM SH 0.6693 OAL 0.3930T-Slot,Replacable Head Carbide TiAlN Single End 0.0160 0.41MM T-Slot

ISCAR SD D1.50-H187D-SP17 IC908 DIA 37.80MM SH 0.6693 OAL 0.3930T-Slot,Replacable Head Carbide TiAlN Single End 0.0160 0.41MM T-Slot

Call (262) 251-4020 for pricing
Picture of ISCAR MM EC625E47R31CF-4T10 IC908 DIA 5/8 SH T10 LOC 0.50 OAL 1.2730Screw On Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM MULTI-MASTER

ISCAR MM EC625E47R31CF-4T10 IC908 DIA 5/8 SH T10 LOC 0.50 OAL 1.2730Screw On Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR MM EC625E47C24CF-4T10 IC908 DIA 5/8 SH T10 LOC 0.50 OAL 1.2730End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

ISCAR MM EC625E47C24CF-4T10 IC908 DIA 5/8 SH T10 LOC 0.50 OAL 1.2730End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR ECAI-F-2 625-1.0-W625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp SolidMill

ISCAR ECAI-F-2 625-1.0-W625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp SolidMill

Call (262) 251-4020 for pricing
Picture of ISCAR SLANL 24-15 TANG Turning Stick Tool On Edge Insert 1.500 Square

ISCAR SLANL 24-15 TANG Turning Stick Tool On Edge Insert 1.500 Square

ANSI: SLANL 24-15 TANG

ISO: SLANL 24-15 TANG

Call (262) 251-4020 for pricing
Picture of ISCAR SLANR 24-15 TANG Turning Stick Tool On Edge Insert 1.500 Square

ISCAR SLANR 24-15 TANG Turning Stick Tool On Edge Insert 1.500 Square

ANSI: SLANR 24-15 TANG

ISO: SLANR 24-15 TANG

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM08757FK009S00M DIA 7/8 SH 0.8750 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM08757FK009S00M DIA 7/8 SH 0.8750 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF05004I800ERNC0 DIA 1/2 SH 0.50 LOC 3.1250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

SWIFTCARB AF05004I800ERNC0 DIA 1/2 SH 0.50 LOC 3.1250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

Call (262) 251-4020 for pricing
Picture of IMCO 69095 DIA 1/2 SH 0.50 LOC 2.6250 OAL 5.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Omega-6 Mill

IMCO 69095 DIA 1/2 SH 0.50 LOC 2.6250 OAL 5.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Omega-6 Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM06255G6009RNCM DIA 5/8 SH 0.6250 LOC 2.2500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

SWIFTCARB XM06255G6009RNCM DIA 5/8 SH 0.6250 LOC 2.2500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XD07504CSFK9TC0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD07504CSFK9TC0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL 5366492 M20-2.50MM Cut Spiral Point Plug 3.0P-5.5P HSSE DLC

WIDIA/KENNAMETAL 5366492 M20-2.50MM Cut Spiral Point Plug 3.0P-5.5P HSSE DLC

Call (262) 251-4020 for pricing
Picture of IMCO 69178 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0591 1.50MM Omega-6 Mill

IMCO 69178 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0591 1.50MM Omega-6 Mill

Call (262) 251-4020 for pricing
Picture of IMCO 69177 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0394 1.00MM Omega-6 Mill

IMCO 69177 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0394 1.00MM Omega-6 Mill

Call (262) 251-4020 for pricing
Picture of IMCO 69176 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0197 0.50MM Omega-6 Mill

IMCO 69176 DIA 12MM SH 0.4724 LOC 2.5591 OAL 4.9213 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0197 0.50MM Omega-6 Mill

Call (262) 251-4020 for pricing
Picture of EMUGE 2869AZ.010 DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.8346 End Mill Carbide TiAlN Single End Square Sharp Multi-Cut

EMUGE 2869AZ.010 DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.8346 End Mill Carbide TiAlN Single End Square Sharp Multi-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 2851A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM Jet-Cut

EMUGE 2851A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM Jet-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 2850A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM Jet-Cut

EMUGE 2850A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM Jet-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 2834A.010 DIA 10MM SH 0.3937 LOC 0.3150 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 2834A.010 DIA 10MM SH 0.3937 LOC 0.3150 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 2815A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM Jet-Cut

EMUGE 2815A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM Jet-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 2814A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM Jet-Cut

EMUGE 2814A.010 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM Jet-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 1966A.04375 DIA 7/16 SH 0.4375 LOC 0.3437 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

EMUGE 1966A.04375 DIA 7/16 SH 0.4375 LOC 0.3437 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

Call (262) 251-4020 for pricing
Picture of EMUGE 1942R.010 DIA 10MM SH 0.3937 LOC 0.3150 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide CrN Single End Corner Radius 0.0394 1.00MM Alu-Cut

EMUGE 1942R.010 DIA 10MM SH 0.3937 LOC 0.3150 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide CrN Single End Corner Radius 0.0394 1.00MM Alu-Cut

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDS411A14000 SC Drill 14MM/.5512/ 3XD

WIDIA/KENNAMETAL TDS411A14000 SC Drill 14MM/.5512/ 3XD

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF05005HY00ERMC0 DIA 1/2 SH 0.50 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AF05005HY00ERMC0 DIA 1/2 SH 0.50 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF05005HY00ERLC0 DIA 1/2 SH 0.50 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AF05005HY00ERLC0 DIA 1/2 SH 0.50 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of YG-1 66911 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

YG-1 66911 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 66910 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

YG-1 66910 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 66909 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

YG-1 66909 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

Call (262) 251-4020 for pricing
Picture of EMUGE CU959401.5016 Tap 3/4-10.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiCN

EMUGE CU959401.5016 Tap 3/4-10.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiCN

ISO: CU959401.5016

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM07505BU005RVCM DIA 3/4 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

SWIFTCARB XM07505BU005RVCM DIA 3/4 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM06255HY00ERQ0M DIA 5/8 SH 0.6250 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

SWIFTCARB XM06255HY00ERQ0M DIA 5/8 SH 0.6250 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06255GS00ERH00 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

SWIFTCARB AF06255GS00ERH00 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06255GS00ERC00 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AF06255GS00ERC00 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06255GS00ER600 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

SWIFTCARB AF06255GS00ER600 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06255GS00ER300 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

SWIFTCARB AF06255GS00ER300 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06255GS00EF900 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0800 2.03MM

SWIFTCARB AF06255GS00EF900 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0800 2.03MM

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHTCB34R5120 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.1200 3.05MM PHENOM CHIMPBREAKER

GORILLA MILL GMHTCB34R5120 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.1200 3.05MM PHENOM CHIMPBREAKER

ISO: GMHTCB34R5120

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHTCB34R5090 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0900 2.29MM PHENOM CHIMPBREAKER

GORILLA MILL GMHTCB34R5090 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0900 2.29MM PHENOM CHIMPBREAKER

ISO: GMHTCB34R5090

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHTCB34R5060 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0600 1.52MM PHENOM CHIMPBREAKER

GORILLA MILL GMHTCB34R5060 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0600 1.52MM PHENOM CHIMPBREAKER

ISO: GMHTCB34R5060

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHTCB34R5030 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0300 0.76MM PHENOM CHIMPBREAKER

GORILLA MILL GMHTCB34R5030 DIA 3/4" SH 0.7500 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End Corner Radius 0.0300 0.76MM PHENOM CHIMPBREAKER

ISO: GMHTCB34R5030

Call (262) 251-4020 for pricing
Picture of IMCO 64479 DIA 12MM SH 0.4724 LOC 1.4173 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0591 1.50MM Pow-R-Path Mill

IMCO 64479 DIA 12MM SH 0.4724 LOC 1.4173 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0591 1.50MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of PARLEC PC6-16ER3 Boring Head Collet Chuck

PARLEC PC6-16ER3 Boring Head Collet Chuck

ANSI: PC6-16ER3

ISO: PC6-16ER3

Call (262) 251-4020 for pricing
Picture of PARLEC PC4-32ER325 Boring Head Collet Chuck

PARLEC PC4-32ER325 Boring Head Collet Chuck

ANSI: PC4-32ER325

ISO: PC4-32ER325

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0315-094-050R-3D 0.315" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0315-094-050R-3D 0.315" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0315-094-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0256-079-050R-3D 0.256" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0256-079-050R-3D 0.256" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0256-079-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0236-071-050R-3D 0.236" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0236-071-050R-3D 0.236" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0236-071-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0295-089-050R-3D 0.295" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0295-089-050R-3D 0.295" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0295-089-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0275-082-050R-3D 0.275" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0275-082-050R-3D 0.275" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0275-082-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0374-112-050R-3D 0.374" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0374-112-050R-3D 0.374" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0374-112-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0354-106-050R-3D 0.354" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0354-106-050R-3D 0.354" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0354-106-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0335-100-050R-3D 0.335" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0335-100-050R-3D 0.335" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0335-100-050R-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0374-130-039B-3.5D 0.374" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISCAR DCM 0374-130-039B-3.5D 0.374" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISO: DCM 0374-130-039B-3.5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0354-122-035B-3.5D 0.37" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISCAR DCM 0354-122-035B-3.5D 0.37" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISO: DCM 0354-122-035B-3.5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0335-114-035B-3.5D 0.35" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISCAR DCM 0335-114-035B-3.5D 0.35" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISO: DCM 0335-114-035B-3.5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0315-110-031B-3.5D 0.331" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISCAR DCM 0315-110-031B-3.5D 0.331" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISO: DCM 0315-110-031B-3.5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0295-102-031B-3.5D 0.295" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISCAR DCM 0295-102-031B-3.5D 0.295" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3.5xD, Suitable for Chamfer ing Holders

ISO: DCM 0295-102-031B-3.5D

Call (262) 251-4020 for pricing
Picture of ISCAR HCE D12/.50-MMT08 Milling Cutter 0.472 Diameter Screw On T08 1.102 OAL 1 Flute

ISCAR HCE D12/.50-MMT08 Milling Cutter 0.472 Diameter Screw On T08 1.102 OAL 1 Flute

ANSI: HCE D12/.50-MMT08

ISO: HCE D12/.50-MMT08

Call (262) 251-4020 for pricing
Picture of ISCAR HCM D12/.50-MMT08 Milling Cutter 0.472 Diameter Screw On T08 1.102 OAL 1 Flute

ISCAR HCM D12/.50-MMT08 Milling Cutter 0.472 Diameter Screw On T08 1.102 OAL 1 Flute

ANSI: HCM D12/.50-MMT08

ISO: HCM D12/.50-MMT08

Call (262) 251-4020 for pricing
Picture of ISCAR FSHDR 25.4-8 Face Grooving Stick Tool 1.000 Tool

ISCAR FSHDR 25.4-8 Face Grooving Stick Tool 1.000 Tool

ISO: FSHDR 25.4-8

Call (262) 251-4020 for pricing
Picture of ISCAR FSHDR 25.4-6 Face Grooving Stick Tool 1.000 Tool

ISCAR FSHDR 25.4-6 Face Grooving Stick Tool 1.000 Tool

ISO: FSHDR 25.4-6

Call (262) 251-4020 for pricing
Picture of ISCAR GHVL 25.4-8 Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR GHVL 25.4-8 Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: GHVL 25.4-8

ISO: GHVL 25.4-8

Call (262) 251-4020 for pricing
Picture of ISCAR GHVR 25.4-8 Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR GHVR 25.4-8 Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: GHVR 25.4-8

ISO: GHVR 25.4-8

Call (262) 251-4020 for pricing
Picture of ISCAR HAPL 31.7C Face Grooving Adapter Holder 1.250 Tool

ISCAR HAPL 31.7C Face Grooving Adapter Holder 1.250 Tool

ANSI: HAPL 31.7C

ISO: HAPL 31.7C

Call (262) 251-4020 for pricing
Picture of ISCAR HAPR 31.7C Face Grooving Adapter Holder 1.250 Tool

ISCAR HAPR 31.7C Face Grooving Adapter Holder 1.250 Tool

ANSI: HAPR 31.7C

ISO: HAPR 31.7C

Call (262) 251-4020 for pricing
Picture of ISCAR HAL 31.7C Face Grooving Adapter Holder 1.250 Tool

ISCAR HAL 31.7C Face Grooving Adapter Holder 1.250 Tool

ANSI: HAL 31.7C

ISO: HAL 31.7C

Call (262) 251-4020 for pricing
Picture of ISCAR HAR 31.7C Face Grooving Adapter Holder 1.250 Tool

ISCAR HAR 31.7C Face Grooving Adapter Holder 1.250 Tool

ANSI: HAR 31.7C

ISO: HAR 31.7C

Call (262) 251-4020 for pricing
Picture of ISCAR DGFH 32-6-JHP Cut Off,Grooving Blade 1.260 Tool

ISCAR DGFH 32-6-JHP Cut Off,Grooving Blade 1.260 Tool

ANSI: DGFH 32-6-JHP

ISO: DGFH 32-6-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR DGFH 32-5-JHP Cut Off,Grooving Blade 1.260 Tool

ISCAR DGFH 32-5-JHP Cut Off,Grooving Blade 1.260 Tool

ANSI: DGFH 32-5-JHP

ISO: DGFH 32-5-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR DGFH 32-4-JHP Cut Off,Grooving Blade 1.260 Tool

ISCAR DGFH 32-4-JHP Cut Off,Grooving Blade 1.260 Tool

ANSI: DGFH 32-4-JHP

ISO: DGFH 32-4-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR DGFH 32-2-JHP Cut Off,Grooving Blade 1.260 Tool

ISCAR DGFH 32-2-JHP Cut Off,Grooving Blade 1.260 Tool

ANSI: DGFH 32-2-JHP

ISO: DGFH 32-2-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR DGFH 32-3-JHP Cut Off,Grooving Blade 1.260 Tool

ISCAR DGFH 32-3-JHP Cut Off,Grooving Blade 1.260 Tool

ANSI: DGFH 32-3-JHP

ISO: DGFH 32-3-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR TGFHL 26T23-3 Cut Off,Grooving Blade 1.024 Tool

ISCAR TGFHL 26T23-3 Cut Off,Grooving Blade 1.024 Tool

ANSI: TGFHL 26T23-3

ISO: TGFHL 26T23-3

Call (262) 251-4020 for pricing
Picture of ISCAR TGFHR 26T23-3 Cut Off,Grooving Blade 1.024 Tool

ISCAR TGFHR 26T23-3 Cut Off,Grooving Blade 1.024 Tool

ANSI: TGFHR 26T23-3

ISO: TGFHR 26T23-3

Call (262) 251-4020 for pricing
Picture of ISCAR SGFFR 20-60-6 Face Grooving Stick Tool 0.787 Tool

ISCAR SGFFR 20-60-6 Face Grooving Stick Tool 0.787 Tool

ANSI: SGFFR 20-60-6

ISO: SGFFR 20-60-6

Call (262) 251-4020 for pricing
Picture of INGERSOLL 47A20001TSRA40 IN2006 DIA 20MM SH T12 LOC 0.7874End Mill,Replacable Head Carbide TiAlN Single End High Feed0.1583 4.02MM CHIPSURFER

INGERSOLL 47A20001TSRA40 IN2006 DIA 20MM SH T12 LOC 0.7874End Mill,Replacable Head Carbide TiAlN Single End High Feed0.1583 4.02MM CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL S125T12SK-31 SH 1.2500 OAL 7.50 Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

INGERSOLL S125T12SK-31 SH 1.2500 OAL 7.50 Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL S032T12SK080 SH 1.2598 OAL 7.4803Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

INGERSOLL S032T12SK080 SH 1.2598 OAL 7.4803Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL 47A-7504TSRA16 IN2006 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Carbide TiAlN Single End High Feed0.1600 4.06MM CHIPSURFER

INGERSOLL 47A-7504TSRA16 IN2006 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Carbide TiAlN Single End High Feed0.1600 4.06MM CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Steel

INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Steel

ISO: B3.18

Call (262) 251-4020 for pricing
Picture of INGERSOLL 15N1F-1001780R00 Milling Cutter 45.0° 1.000 Cylindrical 1.0000 3 Flute 0.18 Max DOC 3.750 OAL

INGERSOLL 15N1F-1001780R00 Milling Cutter 45.0° 1.000 Cylindrical 1.0000 3 Flute 0.18 Max DOC 3.750 OAL

ANSI: 15N1F-1001780R00

ISO: 15N1F-1001780R00

Call (262) 251-4020 for pricing
Picture of CANELA Tool 1230210100 Milling 90.0°, Face Mill Cutter 1.00 Diameter Cylindrical Shank1.0000

CANELA Tool 1230210100 Milling 90.0°, Face Mill Cutter 1.00 Diameter Cylindrical Shank1.0000

ANSI: 1230210100

ISO: 1230210100

Call (262) 251-4020 for pricing
Picture of CANELA Tool 1230060100 Milling 90.0°, Face Mill Cutter 1.00 Diameter Screw M12

CANELA Tool 1230060100 Milling 90.0°, Face Mill Cutter 1.00 Diameter Screw M12

ANSI: 1230060100

ISO: 1230060100

Call (262) 251-4020 for pricing
Picture of YG-1 80906PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

YG-1 80906PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 80905PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

YG-1 80905PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 80904PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

YG-1 80904PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

Call (262) 251-4020 for pricing
Picture of DAPRA SSEM0750-MOD-R35-2C 90.0°, End Mill 0.750 Cutter Diameter Screw On M10 Shank 2 Flute

DAPRA SSEM0750-MOD-R35-2C 90.0°, End Mill 0.750 Cutter Diameter Screw On M10 Shank 2 Flute

ANSI: SSEM0750-MOD-R35-2C

ISO: SSEM0750-MOD-R35-2C

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6412010110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM 4G Mill

YG-1 SEME6412010110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM 4G Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6412005110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM 4G Mill

YG-1 SEME6412005110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM 4G Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6412003110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0118 0.30MM 4G Mill

YG-1 SEME6412003110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0118 0.30MM 4G Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6112010110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM 4G Mill

YG-1 SEME6112010110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM 4G Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6112005110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM 4G Mill

YG-1 SEME6112005110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM 4G Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME6112003110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0118 0.30MM 4G Mill

YG-1 SEME6112003110 DIA 12MM SH 0.4724 LOC 1.1811 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0118 0.30MM 4G Mill

Call (262) 251-4020 for pricing
Picture of EMUGE C3600F01.0390 Tap Mod Bottom M18-1.50MM 6H Metric DIN/DIN HSSE-Powder Metal TiN

EMUGE C3600F01.0390 Tap Mod Bottom M18-1.50MM 6H Metric DIN/DIN HSSE-Powder Metal TiN

ISO: C3600F01.0390

Call (262) 251-4020 for pricing
Picture of YG-1 01453CE DIA 1-3/8 SH 1.2500 LOC 1.6250 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 01453CE DIA 1-3/8 SH 1.2500 LOC 1.6250 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

Call (262) 251-4020 for pricing
Picture of M.A. FORD 278500611B DIA 1/2 SH 0.50 LOC 1.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM TuffCut® XT

M.A. FORD 278500611B DIA 1/2 SH 0.50 LOC 1.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM TuffCut® XT

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 40242000T075R050 DIA 20MM SH 0.7874 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM VariMill

HANITA/WIDIA 40242000T075R050 DIA 20MM SH 0.7874 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM VariMill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 40241600T075R100 DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM VariMill

HANITA/WIDIA 40241600T075R100 DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM VariMill

Call (262) 251-4020 for pricing
Picture of YG-1 16052 DIA 45MM SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix HSS Uncoated Single End Square Sharp General Purpose

YG-1 16052 DIA 45MM SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix HSS Uncoated Single End Square Sharp General Purpose

Call (262) 251-4020 for pricing
Picture of AWARD K-408-CB DIA 1/4 SH 0.3750 LOC 2.00 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD K-408-CB DIA 1/4 SH 0.3750 LOC 2.00 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AC07503GS00ERQ00 DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

SWIFTCARB AC07503GS00ERQ00 DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4V0519007E DIA 3/4 SH 2.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill I

HANITA/WIDIA TF4V0519007E DIA 3/4 SH 2.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill I

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4V0510004C DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0600 1.52MM VariMill I

HANITA/WIDIA TF4V0510004C DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0600 1.52MM VariMill I

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200928-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.039 Diameter 0.125 Shank 2.500 OAL 0.248 LOC4 Flute Diamond

CRYSTALLUME P820-200928-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.039 Diameter 0.125 Shank 2.500 OAL 0.248 LOC4 Flute Diamond

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200926-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.031 Diameter 0.125 Shank 2.500 OAL 0.250 LOC4 Flute Diamond

CRYSTALLUME P820-200926-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.031 Diameter 0.125 Shank 2.500 OAL 0.250 LOC4 Flute Diamond

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200924-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.031 Diameter 0.125 Shank 2.500 OAL 0.150 LOC4 Flute Diamond

CRYSTALLUME P820-200924-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.031 Diameter 0.125 Shank 2.500 OAL 0.150 LOC4 Flute Diamond

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200922-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.019 Diameter 0.125 Shank 2.500 OAL 0.098 LOC2 Flute Diamond

CRYSTALLUME P820-200922-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.019 Diameter 0.125 Shank 2.500 OAL 0.098 LOC2 Flute Diamond

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200920-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.015 Diameter 0.125 Shank 2.500 OAL 0.070 LOC2 Flute Diamond

CRYSTALLUME P820-200920-1 End Mill Ball Nose High Helix Deep Cavity End Mill Ball End 0.015 Diameter 0.125 Shank 2.500 OAL 0.070 LOC2 Flute Diamond

Call (262) 251-4020 for pricing
Picture of CRYSTALLUME P820-200038-1 End Mill Sharp High Helix Standard Diamond Sharp End 0.375 Diameter 0.375 Shank 2.500 OAL 0.875 LOC4 Flute Diamond

CRYSTALLUME P820-200038-1 End Mill Sharp High Helix Standard Diamond Sharp End 0.375 Diameter 0.375 Shank 2.500 OAL 0.875 LOC4 Flute Diamond

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM V5 ULTRA

MASTERCUT DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM V5 ULTRA

Call (262) 251-4020 for pricing
Picture of WIDIN VXB554A032 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose VH SERIES

WIDIN VXB554A032 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose VH SERIES

Call (262) 251-4020 for pricing
Picture of YG-1 20540PC DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute High Helix Powder Metal TiCN Single End Square Sharp ASP

YG-1 20540PC DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute High Helix Powder Metal TiCN Single End Square Sharp ASP

Call (262) 251-4020 for pricing
Picture of IMCO 62488 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Hard Metal Wall Finisher

IMCO 62488 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Hard Metal Wall Finisher

Call (262) 251-4020 for pricing
Picture of RMC MVVNN-20-4DTurning Stick Tool 35.0° Insert Square 1.250 6.000 Oal Left Hand

RMC MVVNN-20-4DTurning Stick Tool 35.0° Insert Square 1.250 6.000 Oal Left Hand

ANSI: MVVNN-20-4D

ISO: MVVNN-20-4D

Call (262) 251-4020 for pricing
Picture of RMC MVVNN-20-3DTurning Stick Tool 35.0° Insert Square 1.250 6.000 Oal Left Hand

RMC MVVNN-20-3DTurning Stick Tool 35.0° Insert Square 1.250 6.000 Oal Left Hand

ANSI: MVVNN-20-3D

ISO: MVVNN-20-3D

Call (262) 251-4020 for pricing
Picture of YG-1 05446CE DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 05446CE DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06254FK009RHC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

SWIFTCARB AF06254FK009RHC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06254FK009RCC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AF06254FK009RCC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF06254FK009R6C0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

SWIFTCARB AF06254FK009R6C0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of WIDIN DB512140 DIA 14MM SH 0.5512 LOC 1.1811 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB512140 DIA 14MM SH 0.5512 LOC 1.1811 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of WIDIN DB512130 DIA 13MM SH 0.5512 LOC 1.1811 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB512130 DIA 13MM SH 0.5512 LOC 1.1811 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of YG-1 67909 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

YG-1 67909 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 67908 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

YG-1 67908 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 67907 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

YG-1 67907 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 343725008 DIA 1 SH 2.00 LOC 3.00 OAL 5.50 End Mill Standard Flute High Helix Cobalt Uncoated Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA 343725008 DIA 1 SH 2.00 LOC 3.00 OAL 5.50 End Mill Standard Flute High Helix Cobalt Uncoated Single End Square Sharp WIDIA Series Mills

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M170D012Z02A16RD07TL120 Button Cutter Milling Cutter 0.472 Cutter Diameter Cylindrical 0.629

WIDIA/KENNAMETAL M170D012Z02A16RD07TL120 Button Cutter Milling Cutter 0.472 Cutter Diameter Cylindrical 0.629

ANSI: M170D012Z02A16RD07TL120

ISO: M170D012Z02A16RD07TL120

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M170D012Z02A12RD07TL100 Button Cutter Milling Cutter 0.472 Cutter Diameter Cylindrical 0.472

WIDIA/KENNAMETAL M170D012Z02A12RD07TL100 Button Cutter Milling Cutter 0.472 Cutter Diameter Cylindrical 0.472

ANSI: M170D012Z02A12RD07TL100

ISO: M170D012Z02A12RD07TL100

Call (262) 251-4020 for pricing
Picture of IMCO 69249 DIA 5/8 SH 0.6250 LOC 1.3750 OAL 3.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Omega-6 Mill

IMCO 69249 DIA 5/8 SH 0.6250 LOC 1.3750 OAL 3.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Omega-6 Mill

Call (262) 251-4020 for pricing
Picture of HTC 157-4100 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

HTC 157-4100 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of HTC 157-2100 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

HTC 157-2100 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA I4S0750W300L DIA 3/4 SH 0.7500 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA I4S0750W300L DIA 3/4 SH 0.7500 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA I3S0375T100L DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA I3S0375T100L DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA I2S0750W300L DIA 3/4 SH 0.7500 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA I2S0750W300L DIA 3/4 SH 0.7500 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

Call (262) 251-4020 for pricing
Picture of TUNGALOY VCA200L07.5A45-06S12 AH725 DIA 5MM SH T08 LOC 0.2953 OAL 1.0039 Countersink,Replacable Head Carbide TiAlN Single End Countersink TUNG MEISTER

TUNGALOY VCA200L07.5A45-06S12 AH725 DIA 5MM SH T08 LOC 0.2953 OAL 1.0039 Countersink,Replacable Head Carbide TiAlN Single End Countersink TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of EMUGE 3441.08020A DIA 4MM SH 0.2362 LOC 0.9055 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3441.08020A DIA 4MM SH 0.2362 LOC 0.9055 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

Call (262) 251-4020 for pricing
Picture of EMUGE 3441.04030A DIA 6MM SH 0.2362 LOC 1.2205 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3441.04030A DIA 6MM SH 0.2362 LOC 1.2205 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

Call (262) 251-4020 for pricing
Picture of EMUGE 3441.04020B DIA 4MM SH 0.2362 LOC 1.1811 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3441.04020B DIA 4MM SH 0.2362 LOC 1.1811 OAL 2.8346 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

Call (262) 251-4020 for pricing
Picture of EMUGE CU35J411.5049 Tap 5/8-18.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P HSS HSSE-Powder Metal TiCN

EMUGE CU35J411.5049 Tap 5/8-18.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P HSS HSSE-Powder Metal TiCN

ISO: CU35J411.5049

Call (262) 251-4020 for pricing
Picture of WIDIN BA304048LSS DIA 3/4 SH 0.7500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose General Purpose

WIDIN BA304048LSS DIA 3/4 SH 0.7500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose General Purpose

Call (262) 251-4020 for pricing
Picture of IMCO 61183 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose Streaker Mill

IMCO 61183 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose Streaker Mill

Call (262) 251-4020 for pricing
Picture of AWARD Z-606TIN DIA 3/8 SH 1.00 LOC 1.50 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD Z-606TIN DIA 3/8 SH 1.00 LOC 1.50 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL VSM11D020Z03M10XD11 90.0° Milling Cutter 0.780 Cutter Diameter Screw On M10

WIDIA/KENNAMETAL VSM11D020Z03M10XD11 90.0° Milling Cutter 0.780 Cutter Diameter Screw On M10

ANSI: VSM11D020Z03M10XD11

ISO: VSM11D020Z03M10XD11

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AC06252BULGKRV00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 6.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

SWIFTCARB AC06252BULGKRV00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 6.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 16562500C DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose TuffCut® GP

M.A. FORD 16562500C DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose TuffCut® GP

Call (262) 251-4020 for pricing
Picture of M.A. FORD 16562500A DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut® GP

M.A. FORD 16562500A DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut® GP

Call (262) 251-4020 for pricing
Picture of M.A. FORD 16562500T DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose TuffCut® GP

M.A. FORD 16562500T DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose TuffCut® GP

Call (262) 251-4020 for pricing
Picture of M.A. FORD 22446850 Carbide Drill Solid Carbide 118° 0.468 Dia 0.468 Shank 5.944 OAL 2 Flute 3.976 Flute Length Carbide

M.A. FORD 22446850 Carbide Drill Solid Carbide 118° 0.468 Dia 0.468 Shank 5.944 OAL 2 Flute 3.976 Flute Length Carbide

ISO: 22446850

Call (262) 251-4020 for pricing
Picture of M.A. FORD 15068750 DIA 11/16 SH 0.7500 LOC 1.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

M.A. FORD 15068750 DIA 11/16 SH 0.7500 LOC 1.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

Call (262) 251-4020 for pricing
Picture of M.A. FORD 15062500 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

M.A. FORD 15062500 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

Call (262) 251-4020 for pricing