Hole Making

Sort by
Picture of TUNGALOY TDX200F25-2 20mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX200F25-2 20mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX200F25-2

$477.15
Picture of TUNGALOY TDX195F25-2 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX195F25-2 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX195F25-2

$477.15
Picture of TUNGALOY TDX190F25-2 19mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX190F25-2 19mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX190F25-2

$477.15
Picture of TUNGALOY TDX185F25-2 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX185F25-2 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX185F25-2

$477.15
Picture of TUNGALOY TDX180F25-2 18mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX180F25-2 18mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX180F25-2

$477.15
Picture of TUNGALOY TDX175F25-2 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX175F25-2 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX175F25-2

$477.15
Picture of TUNGALOY TDX170F20-2 17mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX170F20-2 17mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX170F20-2

$477.15
Picture of TUNGALOY TDX165F20-2 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX165F20-2 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX165F20-2

$477.15
Picture of TUNGALOY TDX160F20-2 16mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX160F20-2 16mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX160F20-2

$477.15
Picture of ISCAR DR0709-1418-100-06-2D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0709-1418-100-06-2D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0709-1418-100-06-2D-N

$477.12
Picture of ISCAR DR0781-1562-100-06-2D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0781-1562-100-06-2D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0781-1562-100-06-2D-N

$477.12
Picture of ISCAR DR0750-1500-100-06-2D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0750-1500-100-06-2D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0750-1500-100-06-2D-N

$477.12
Picture of ISCAR DR0734-1469-100-06-2D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0734-1469-100-06-2D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0734-1469-100-06-2D-N

$477.12
Picture of ISCAR DR0703-1406-075-05-2D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0703-1406-075-05-2D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0703-1406-075-05-2D-N

$477.12
Picture of ISCAR DR0688-1375-075-05-2D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0688-1375-075-05-2D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0688-1375-075-05-2D-N

$477.12
Picture of ISCAR DR0656-1312-075-05-2D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0656-1312-075-05-2D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0656-1312-075-05-2D-N

$477.12
Picture of ISCAR DR0625-1250-075-05-2D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0625-1250-075-05-2D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0625-1250-075-05-2D-N

$477.12
Picture of ISCAR D3N 0866-130-100A-1.5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR D3N 0866-130-100A-1.5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: D3N 0866-130-100A-1.5D

$476.16
Picture of ISCAR D3N 0827-126-100A-1.5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR D3N 0827-126-100A-1.5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: D3N 0827-126-100A-1.5D

$476.16
Picture of ISCAR D3N 0945-142-125R-1.5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 1.5xD

ISCAR D3N 0945-142-125R-1.5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 1.5xD

ISO: D3N 0945-142-125R-1.5D

$475.20
Picture of ISCAR D3N 0906-138-125R-1.5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 1.5xD

ISCAR D3N 0906-138-125R-1.5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 1.5xD

ISO: D3N 0906-138-125R-1.5D

$475.20
Picture of ISCAR DCN 0630-756-075R-12D 0.63" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0630-756-075R-12D 0.63" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0630-756-075R-12D

$475.20
Picture of WIDIA/KENNAMETAL TDMX280R1SL32M TDMX BODY D=28MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX280R1SL32M TDMX BODY D=28MM 1XD SL Shank

$475.13
Picture of WIDIA/KENNAMETAL TDMX270R1SL32M TDMX BODY D=27MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX270R1SL32M TDMX BODY D=27MM 1XD SL Shank

$475.13
Picture of WIDIA/KENNAMETAL TDMX1103R1SL125 TDMX BODY D1.103 1XD SL Shank

WIDIA/KENNAMETAL TDMX1103R1SL125 TDMX BODY D1.103 1XD SL Shank

$475.13
Picture of WIDIA/KENNAMETAL TDMX1063R1SL125 TDMX BODY D1.063 1XD SL Shank

WIDIA/KENNAMETAL TDMX1063R1SL125 TDMX BODY D1.063 1XD SL Shank

$475.13
Picture of ZCC ZTD03-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

ZCC ZTD03-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

$474.93
Picture of INGERSOLL TD1800144T5R00 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

INGERSOLL TD1800144T5R00 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

ISO: TD1800144T5R00

$474.13
Picture of INGERSOLL TD1700136T4R00 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

INGERSOLL TD1700136T4R00 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

ISO: TD1700136T4R00

$474.13
Picture of ISCAR IHSR 161-802 BW Mill Boring Boring Head Cartridge 80.0°

ISCAR IHSR 161-802 BW Mill Boring Boring Head Cartridge 80.0°

ANSI: IHSR 161-802 BW

ISO: IHSR 161-802 BW

$474.05
Picture of ISCAR DCNT0768-165-100A-7/8UNC 0.748 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISCAR DCNT0768-165-100A-7/8UNC 0.748 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISO: DCNT0768-165-100A-7/8UNC

$472.32
Picture of INGERSOLL 4508241 Mill Boring Quick Change PSC "Capt0 Type"6

INGERSOLL 4508241 Mill Boring Quick Change PSC "Capt0 Type"6

ISO: PSC63-MHD50.120

$471.53
Picture of INGERSOLL 4508239 Mill Boring Quick Change PSC "Capt0 Type"6

INGERSOLL 4508239 Mill Boring Quick Change PSC "Capt0 Type"6

ISO: PSC63-MHD40.120

$471.53
Picture of ISCAR DCN 0866-260-100A-3D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0866-260-100A-3D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0866-260-100A-3D

$471.36
Picture of ISCAR DCN 0827-248-100A-3D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0827-248-100A-3D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0827-248-100A-3D

$471.36
Picture of ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$470.93
Picture of ISCAR DCN 0945-283-125R-3D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0945-283-125R-3D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0945-283-125R-3D

$470.40
Picture of ISCAR DCN 0906-272-125R-3D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0906-272-125R-3D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0906-272-125R-3D

$470.40
Picture of INGERSOLL Q0135041N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0135041N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0135041N5R01

$469.47
Picture of INGERSOLL Q0127038N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0127038N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0127038N5R01

$469.47
Picture of INGERSOLL 12S1E-1502781R01 Milling Cutter 90.0°, Drill Mill 1.500 Cylindrical 1.2500 1 Flute Coolant 1.26 Max DOC 5.000 OAL

INGERSOLL 12S1E-1502781R01 Milling Cutter 90.0°, Drill Mill 1.500 Cylindrical 1.2500 1 Flute Coolant 1.26 Max DOC 5.000 OAL

ANSI: 12S1E-1502781R01

ISO: 12S1E-1502781R01

$469.47
Picture of YG-1 P03505 SERIES 5-6 Taper Shank & Straight FLT Standard Length Spade Drill Holder

YG-1 P03505 SERIES 5-6 Taper Shank & Straight FLT Standard Length Spade Drill Holder

$469.00
Picture of PARLEC 4606-63S12 Boring Head Cartridge

PARLEC 4606-63S12 Boring Head Cartridge

ANSI: 4606-63S12

ISO: 4606-63S12

$469.00
Picture of PARLEC 4606-63C12 Boring Head Cartridge

PARLEC 4606-63C12 Boring Head Cartridge

ANSI: 4606-63C12

ISO: 4606-63C12

$469.00
Picture of INGERSOLL YD160012818R01 0.6299 (16.0 mm) QwikTwist Body

INGERSOLL YD160012818R01 0.6299 (16.0 mm) QwikTwist Body

ISO: YD160012818R01

$468.87
Picture of INGERSOLL YD150012018R01 0.5906 (15.0 mm) QwikTwist Body

INGERSOLL YD150012018R01 0.5906 (15.0 mm) QwikTwist Body

ISO: YD150012018R01

$468.87
Picture of ISCAR DCNS 0866-433-086B-5D 0.866" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0866-433-086B-5D 0.866" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0866-433-086B-5D

$467.52
Picture of ISCAR DCNS 0827-413-082B-5D 0.827" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0827-413-082B-5D 0.827" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0827-413-082B-5D

$467.52
Picture of ISCAR DCM 0827-662-100A-8D 0.827 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0827-662-100A-8D 0.827 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0827-662-100A-8D

$467.52
Picture of PARLEC 4605-61W08 Boring Head Cartridge

PARLEC 4605-61W08 Boring Head Cartridge

ANSI: 4605-61W08

ISO: 4605-61W08

$466.00
Picture of INGERSOLL 12S1B-1502781R01 Milling Cutter 90.0°, Drill Mill 1.500 Weldon 1.2500 1 Flute Coolant 1.12 Max DOC 5.000 OAL

INGERSOLL 12S1B-1502781R01 Milling Cutter 90.0°, Drill Mill 1.500 Weldon 1.2500 1 Flute Coolant 1.12 Max DOC 5.000 OAL

ANSI: 12S1B-1502781R01

ISO: 12S1B-1502781R01

$464.80
Picture of ISCAR BHR MB32-32X63 Mill Boring Boring Head Twin Bore

ISCAR BHR MB32-32X63 Mill Boring Boring Head Twin Bore

ANSI: BHR MB32-32X63

ISO: BHR MB32-32X63

$464.77
Picture of ISCAR DCN 1024-154-125R-1.5D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 1024-154-125R-1.5D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 1024-154-125R-1.5D

$464.64
Picture of ISCAR DCN 0984-150-125R-1.5D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 0984-150-125R-1.5D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 0984-150-125R-1.5D

$464.64
Picture of ISCAR DCN 0787-394-100A-5D 0.787" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0787-394-100A-5D 0.787" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0787-394-100A-5D

$464.64
Picture of ISCAR DCN 0748-374-100A-5D 0.748" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0748-374-100A-5D 0.748" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0748-374-100A-5D

$464.64
Picture of PARLEC B50-PC3-6 Boring Head Machine Taper

PARLEC B50-PC3-6 Boring Head Machine Taper

ANSI: B50-PC3-6

ISO: B50-PC3-6

$464.00
Picture of INGERSOLL TD1600192S7R01 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

INGERSOLL TD1600192S7R01 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

ISO: TD1600192S7R01

$463.87
Picture of INGERSOLL TD1600192T4R00 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

INGERSOLL TD1600192T4R00 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

ISO: TD1600192T4R00

$463.87
Picture of INGERSOLL 4508247 Mill Boring Quick Change PSC "Capt0 Type"8

INGERSOLL 4508247 Mill Boring Quick Change PSC "Capt0 Type"8

ISO: PSC80-MHD80.75

$463.47
Picture of INGERSOLL LD2200066N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200066N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200066N5R01

$462.93
Picture of INGERSOLL LD2100063N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100063N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100063N5R01

$462.93
Picture of INGERSOLL LD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200066JFR00

$462.93
Picture of INGERSOLL LD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100063JFR00

$462.93
Picture of INGERSOLL YD2200066C8R01 0.8661 (22.0 mm) QwikTwist Body

INGERSOLL YD2200066C8R01 0.8661 (22.0 mm) QwikTwist Body

ISO: YD2200066C8R01

$462.80
Picture of WIDIA/KENNAMETAL TDM0866R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0866R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

$462.28
Picture of WIDIA/KENNAMETAL TDM0827R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0827R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

$462.28
Picture of WIDIA/KENNAMETAL TDM220R3SCF25M TDM1 SCF Drill BODY 3XD D=22.0

WIDIA/KENNAMETAL TDM220R3SCF25M TDM1 SCF Drill BODY 3XD D=22.0

$462.28
Picture of WIDIA/KENNAMETAL TDM210R3SCF25M TDM1 SCF Drill BODY 3XD D=21.0

WIDIA/KENNAMETAL TDM210R3SCF25M TDM1 SCF Drill BODY 3XD D=21.0

$462.28
Picture of ISCAR E90AC D1.25-1.0W1.25 Milling Cutter 90.0°, Drill Mill 1.250 Diameter Weldon 1.250 5.120 OAL 3 Flute

ISCAR E90AC D1.25-1.0W1.25 Milling Cutter 90.0°, Drill Mill 1.250 Diameter Weldon 1.250 5.120 OAL 3 Flute

ANSI: E90AC D1.25-1.0W1.25

ISO: E90AC D1.25-1.0W1.25

$460.80
Picture of INGERSOLL Hole Making Mill Boring Boring Head Extension MB50 1.968 Heavy Metal

INGERSOLL Hole Making Mill Boring Boring Head Extension MB50 1.968 Heavy Metal

ISO: RAV50/16.74

$460.53
Picture of INGERSOLL QR0135041N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135041N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135041N5R02

$460.13
Picture of INGERSOLL QR0127038N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0127038N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0127038N5R02

$460.13
Picture of INGERSOLL QR0135041JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135041JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135041JER00

$460.13
Picture of INGERSOLL QR0130039JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0130039JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0130039JER00

$460.13
Picture of INGERSOLL QR0150045JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150045JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150045JER00

$460.13
Picture of INGERSOLL QR0125038JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0125038JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0125038JER00

$460.13
Picture of INGERSOLL QR0120036JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0120036JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0120036JER00

$460.13
Picture of INGERSOLL QR0150045N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150045N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150045N5R02

$460.13
Picture of INGERSOLL QR0143043N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0143043N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0143043N5R02

$460.13
Picture of INGERSOLL TD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200066JFR00

$460.13
Picture of INGERSOLL TD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100063JFR00

$460.13
Picture of INGERSOLL TD2200066C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200066C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200066C8R01

$460.13
Picture of INGERSOLL TD2100063C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100063C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100063C8R01

$460.13
Picture of INGERSOLL QR0155048JER00 0.610 (15.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0155048JER00 0.610 (15.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0155048JER00

$460.13
Picture of INGERSOLL QR0145045JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0145045JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0145045JER00

$460.13
Picture of INGERSOLL QR0140042JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0140042JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0140042JER00

$460.13
Picture of INGERSOLL QR0198040N5R02 0.780 (19.81 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0198040N5R02 0.780 (19.81 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0198040N5R02

$459.20
Picture of INGERSOLL QR0191038N5R02 0.750 (19.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0191038N5R02 0.750 (19.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0191038N5R02

$459.20
Picture of INGERSOLL QR0183037N5R02 0.719 (18.26 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0183037N5R02 0.719 (18.26 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0183037N5R02

$459.20
Picture of INGERSOLL QR0175035N5R02 0.689 (17.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175035N5R02 0.689 (17.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175035N5R02

$459.20
Picture of INGERSOLL QR0167033N5R02 0.658 (16.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0167033N5R02 0.658 (16.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0167033N5R02

$459.20
Picture of INGERSOLL QR0159032N5R02 0.626 (15.90 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0159032N5R02 0.626 (15.90 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0159032N5R02

$459.20
Picture of INGERSOLL TD2400072S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400072S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400072S9R01

$459.20
Picture of INGERSOLL TD2300069S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300069S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300069S9R01

$459.20
Picture of INGERSOLL QR0205042JFR00 0.807 (20.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0205042JFR00 0.807 (20.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0205042JFR00

$459.20
Picture of INGERSOLL QR0195040JFR00 0.768 (19.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0195040JFR00 0.768 (19.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0195040JFR00

$459.20
Picture of INGERSOLL QR0175036JFR00 0.689 (17.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175036JFR00 0.689 (17.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175036JFR00

$459.20
Picture of INGERSOLL QR0200040JFR00 0.787 (20.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0200040JFR00 0.787 (20.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0200040JFR00

$459.20
Picture of INGERSOLL QR0190038JFR00 0.748 (19.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0190038JFR00 0.748 (19.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0190038JFR00

$459.20
Picture of INGERSOLL QR0180036JFR00 0.709 (18.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0180036JFR00 0.709 (18.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0180036JFR00

$459.20
Picture of INGERSOLL QR0170034JFR00 0.669 (17.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0170034JFR00 0.669 (17.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0170034JFR00

$459.20
Picture of INGERSOLL QR0160032JER00 0.630 (16.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0160032JER00 0.630 (16.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0160032JER00

$459.20
Picture of INGERSOLL QR0185038JFR00 0.728 (18.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0185038JFR00 0.728 (18.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0185038JFR00

$459.20
Picture of ISCAR DCN 0906-138-125A-1.5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 0906-138-125A-1.5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 0906-138-125A-1.5D

$458.88
Picture of ISCAR DCN 0945-142-125A-1.5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 0945-142-125A-1.5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 0945-142-125A-1.5D

$458.88
Picture of TUNGALOY TIDU0630F0750-8 0.63" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0630F0750-8 0.63" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0630F0750-8

$457.65
Picture of TUNGALOY TIDU0591F0750-8 0.591" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0591F0750-8 0.591" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0591F0750-8

$457.65
Picture of TUNGALOY TID160F20-8 16mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID160F20-8 16mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID160F20-8

$457.65
Picture of TUNGALOY TIDU0669F0750-5 0.669" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0669F0750-5 0.669" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0669F0750-5

$457.65
Picture of TUNGALOY TID180F25-5 18mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID180F25-5 18mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID180F25-5

$457.65
Picture of TUNGALOY TID170F20-5 17mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID170F20-5 17mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID170F20-5

$457.65
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper BT50

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper BT50

ISO: MAS403-BT50BMHD80.75

$457.60
Picture of TUNGALOY SLJ1220L1650NA G2F 0.4803" Brazed GunDrill s

TUNGALOY SLJ1220L1650NA G2F 0.4803" Brazed GunDrill s

ISO: SLJ1220L1650NA G2F

$457.57
Picture of TUNGALOY SLJ1220L1250NA G2F 0.4803" Brazed GunDrill s

TUNGALOY SLJ1220L1250NA G2F 0.4803" Brazed GunDrill s

ISO: SLJ1220L1250NA G2F

$457.57
Picture of TUNGALOY SLJ1210L1650NA G2F 0.4763" Brazed GunDrill s

TUNGALOY SLJ1210L1650NA G2F 0.4763" Brazed GunDrill s

ISO: SLJ1210L1650NA G2F

$457.57
Picture of TUNGALOY SLJ1210L1250NA G2F 0.4763" Brazed GunDrill s

TUNGALOY SLJ1210L1250NA G2F 0.4763" Brazed GunDrill s

ISO: SLJ1210L1250NA G2F

$457.57
Picture of TUNGALOY SLJ1200L1650NA G2F 0.4724" Brazed GunDrill s

TUNGALOY SLJ1200L1650NA G2F 0.4724" Brazed GunDrill s

ISO: SLJ1200L1650NA G2F

$457.57
Picture of TUNGALOY SLJ1200L1250NA G2F 0.4724" Brazed GunDrill s

TUNGALOY SLJ1200L1250NA G2F 0.4724" Brazed GunDrill s

ISO: SLJ1200L1250NA G2F

$457.57
Picture of PARLEC B50-PC6-4 Boring Head Machine Taper

PARLEC B50-PC6-4 Boring Head Machine Taper

ANSI: B50-PC6-4

ISO: B50-PC6-4

$457.00
Picture of INGERSOLL LD2000100N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000100N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000100N5R01

$456.40
Picture of INGERSOLL LD2000100JFR01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000100JFR01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000100JFR01

$456.40
Picture of ISCAR IHPR 160-800-19 Mill Boring Boring Head Cartridge Square

ISCAR IHPR 160-800-19 Mill Boring Boring Head Cartridge Square

ANSI: IHPR 160-800-19

ISO: IHPR 160-800-19

$456.27
Picture of ISCAR IHSR 160-800-19 Mill Boring Boring Head Cartridge 80.0°

ISCAR IHSR 160-800-19 Mill Boring Boring Head Cartridge 80.0°

ANSI: IHSR 160-800-19

ISO: IHSR 160-800-19

$456.27
Picture of WIDIA/KENNAMETAL TDM0669R8SCF075 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0669R8SCF075 TDM1 Drill BODY INCH SCF 8XD D

$456.15
Picture of WIDIA/KENNAMETAL TDM180R8SCF25M TDM1 SCF Drill BODY 8XD D=18.0

WIDIA/KENNAMETAL TDM180R8SCF25M TDM1 SCF Drill BODY 8XD D=18.0

$456.15
Picture of WIDIA/KENNAMETAL TDM170R8SCF20M TDM1 SCF Drill BODY 8XD D=17.0

WIDIA/KENNAMETAL TDM170R8SCF20M TDM1 SCF Drill BODY 8XD D=17.0

$456.15
Picture of ISCAR DR0531-1062-063-04-2D-N 0.531" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0531-1062-063-04-2D-N 0.531" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0531-1062-063-04-2D-N

$456.00
Picture of ISCAR DR0500-1000-063-04-2D-N 1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0500-1000-063-04-2D-N 1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0500-1000-063-04-2D-N

$456.00
Picture of ISCAR DR0469-0938-063-04-2D-N 0.469" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0469-0938-063-04-2D-N 0.469" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0469-0938-063-04-2D-N

$456.00
Picture of ISCAR DR0594-1188-075-05-2D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0594-1188-075-05-2D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0594-1188-075-05-2D-N

$456.00
Picture of ISCAR DR0578-1156-075-05-2D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0578-1156-075-05-2D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0578-1156-075-05-2D-N

$456.00
Picture of ISCAR DR0562-1125-075-05-2D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0562-1125-075-05-2D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0562-1125-075-05-2D-N

$456.00
Picture of ISCAR DCM 0945-472-100A-5D 0.98" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0945-472-100A-5D 0.98" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0945-472-100A-5D

$456.00
Picture of ISCAR DCM 0906-453-100A-5D 0.906" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0906-453-100A-5D 0.906" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0906-453-100A-5D

$456.00
Picture of WIDIA/KENNAMETAL TDM0787R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0787R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

$455.29
Picture of WIDIA/KENNAMETAL TDM0748R5SCF075 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0748R5SCF075 TDM1 Drill BODY INCH SCF 5XD D

$455.29
Picture of WIDIA/KENNAMETAL TDM200R5SCF25M TDM1 SCF Drill BODY 5XD D=20.0

WIDIA/KENNAMETAL TDM200R5SCF25M TDM1 SCF Drill BODY 5XD D=20.0

$455.29
Picture of WIDIA/KENNAMETAL TDM190R5SCF25M TDM1 SCF Drill BODY 5XD D=19.0

WIDIA/KENNAMETAL TDM190R5SCF25M TDM1 SCF Drill BODY 5XD D=19.0

$455.29
Picture of ISCAR DCN 0591-709-075R-12D 0.591" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0591-709-075R-12D 0.591" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0591-709-075R-12D

$455.04
Picture of ISCAR DCN 0709-567-100R-8D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0709-567-100R-8D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0709-567-100R-8D

$455.04
Picture of ISCAR DCN 0669-535-075R-8D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0669-535-075R-8D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0669-535-075R-8D

$455.04
Picture of YG-1 P17303 SERIES 3 Straight Shank & Straight Flute Long Length Spade Drill Holder

YG-1 P17303 SERIES 3 Straight Shank & Straight Flute Long Length Spade Drill Holder

$454.97
Picture of ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$454.95
Picture of PARLEC PC6-EBC Boring Head Extension

PARLEC PC6-EBC Boring Head Extension

ANSI: PC6-EBC

ISO: PC6-EBC

$454.00
Picture of TUNGALOY TDXU-0562FS-02 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0562FS-02 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0562FS-02

$453.65
Picture of TUNGALOY TDXU-0531FS-02 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0531FS-02 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0531FS-02

$453.65
Picture of TUNGALOY TDXU-0500FS-02 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0500FS-02 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0500FS-02

$453.65
Picture of TUNGALOY TDX155F20-2 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX155F20-2 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX155F20-2

$453.65
Picture of TUNGALOY TDX150F20-2 15mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX150F20-2 15mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX150F20-2

$453.65
Picture of TUNGALOY TDX145F20-2 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX145F20-2 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX145F20-2

$453.65
Picture of TUNGALOY TDX140F20-2 14mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX140F20-2 14mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX140F20-2

$453.65
Picture of TUNGALOY TDX135F20-2 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX135F20-2 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX135F20-2

$453.65
Picture of TUNGALOY TDX130F20-2 13mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX130F20-2 13mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX130F20-2

$453.65
Picture of TUNGALOY TDX125F20-2 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX125F20-2 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX125F20-2

$453.65
Picture of INGERSOLL TD1900095C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900095C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900095C8R01

$453.60
Picture of INGERSOLL TD2000100JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000100JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000100JFR00

$453.60
Picture of INGERSOLL TD2000100C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000100C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000100C8R01

$453.60
Picture of INGERSOLL TD1900095JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900095JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900095JFR00

$453.60
Picture of INGERSOLL TD2500037S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

INGERSOLL TD2500037S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

ISO: TD2500037S9R01

$453.60
Picture of TUNGALOY EVX12100RLHU Milling Cutter 90.0°, Drill Mill 1.000 Cutter Diameter Weldon 1.0000 8.750 OAL 2 Flute

TUNGALOY EVX12100RLHU Milling Cutter 90.0°, Drill Mill 1.000 Cutter Diameter Weldon 1.0000 8.750 OAL 2 Flute

ANSI: EVX12100RLHU

ISO: EVX12100RLHU

$453.15
Picture of TUNGALOY EVX12025RLA-E Milling Cutter 90.0°, Drill Mill 0.984 Cutter Diameter Weldon 0.9843 2.094 OAL 2 Flute

TUNGALOY EVX12025RLA-E Milling Cutter 90.0°, Drill Mill 0.984 Cutter Diameter Weldon 0.9843 2.094 OAL 2 Flute

ANSI: EVX12025RLA-E

ISO: EVX12025RLA-E

$453.15
Picture of TUNGALOY EVX12025RLA Milling Cutter 90.0°, Drill Mill 0.984 Cutter Diameter Cylindrical Shank0.9843 8.661 OAL 2 Flute

TUNGALOY EVX12025RLA Milling Cutter 90.0°, Drill Mill 0.984 Cutter Diameter Cylindrical Shank0.9843 8.661 OAL 2 Flute

ANSI: EVX12025RLA

ISO: EVX12025RLA

$453.15
Picture of K-Tool FB-2000 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

K-Tool FB-2000 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

ANSI: FB-2000

ISO: FB-2000

$452.92
Picture of INGERSOLL 416500105031F Hole Making Mill Boring Boring Head Machine Taper BT50

INGERSOLL 416500105031F Hole Making Mill Boring Boring Head Machine Taper BT50

ANSI: 416500105031F

ISO: MAS403-BT50FCADBMHD50.66

$452.47
Picture of ISCAR D3N 0787-236-100A-3D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0787-236-100A-3D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0787-236-100A-3D

$452.16
Picture of ISCAR D3N 0748-224-100A-3D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0748-224-100A-3D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0748-224-100A-3D

$452.16
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper BT50

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper BT50

ISO: NMTB50MHD80.60

$451.73
Picture of TUNGALOY TID190R20-6 19mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID190R20-6 19mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID190R20-6

$451.50
Picture of TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX200L101-3

$451.21
Picture of TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX200L101-3

$451.21
Picture of TUNGALOY EVX16050RSA Milling Cutter 90.0°, Drill Mill 1.967 Cutter Diameter Cylindrical Shank1.6535 8.267 OAL 3 Flute

TUNGALOY EVX16050RSA Milling Cutter 90.0°, Drill Mill 1.967 Cutter Diameter Cylindrical Shank1.6535 8.267 OAL 3 Flute

ANSI: EVX16050RSA

ISO: EVX16050RSA

$451.10
Picture of PARLEC CB50-59T107 Boring Head Boring Bar

PARLEC CB50-59T107 Boring Head Boring Bar

ANSI: CB50-59T107

ISO: CB50-59T107

$451.00
Picture of TUNGALOY TIDU0433R0625-12 0.4331" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0433R0625-12 0.4331" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0433R0625-12

$450.30
Picture of TUNGALOY TIDU0413R0625-12 0.4134" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0413R0625-12 0.4134" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0413R0625-12

$450.30
Picture of TUNGALOY TID115R16-12 11.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID115R16-12 11.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID115R16-12

$450.30
Picture of TUNGALOY TID110R16-12 11mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID110R16-12 11mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID110R16-12

$450.30
Picture of TUNGALOY TID105R16-12 10.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID105R16-12 10.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID105R16-12

$450.30
Picture of TUNGALOY TIDU0492R0625-12 0.492" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0492R0625-12 0.492" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0492R0625-12

$450.30
Picture of TUNGALOY TIDU0472R0625-12 0.472" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0472R0625-12 0.472" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0472R0625-12

$450.30
Picture of TUNGALOY TID125R16-12 12.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID125R16-12 12.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID125R16-12

$450.30
Picture of TUNGALOY TID120R16-12 12mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID120R16-12 12mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID120R16-12

$450.30
Picture of ISCAR DRM1750-1750-150-12-1D 1-3/4" Drill ing/Milling Tools

ISCAR DRM1750-1750-150-12-1D 1-3/4" Drill ing/Milling Tools

ISO: DRM1750-1750-150-12-1D

$450.24
Picture of PARLEC 4605-62S12 Boring Head Cartridge

PARLEC 4605-62S12 Boring Head Cartridge

ANSI: 4605-62S12

ISO: 4605-62S12

$450.00
Picture of PARLEC 4605-62C12 Boring Head Cartridge

PARLEC 4605-62C12 Boring Head Cartridge

ANSI: 4605-62C12

ISO: 4605-62C12

$450.00
Picture of TUNGALOY TIDU0866F1000-1.5 0.866" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0866F1000-1.5 0.866" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0866F1000-1.5

$449.05
Picture of TUNGALOY TIDU0827F1000-1.5 0.827" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0827F1000-1.5 0.827" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0827F1000-1.5

$449.05
Picture of TUNGALOY TID220F25-1.5 22mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID220F25-1.5 22mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID220F25-1.5

$449.05
Picture of TUNGALOY TID210F25-1.5 21mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID210F25-1.5 21mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID210F25-1.5

$449.05
Picture of PARLEC N50-PC7-6 Boring Head Machine Taper

PARLEC N50-PC7-6 Boring Head Machine Taper

ANSI: N50-PC7-6

ISO: N50-PC7-6

$449.00
Picture of PARLEC 910-FCW Boring Head Finish Boring Head Large Diameter

PARLEC 910-FCW Boring Head Finish Boring Head Large Diameter

ANSI: 910-FCW

ISO: 910-FCW

$448.00
Picture of PARLEC 321-T06-0 Boring Head Cartridge

PARLEC 321-T06-0 Boring Head Cartridge

ANSI: 321-T06-0

ISO: 321-T06-0

$448.00
Picture of INGERSOLL Q0135027N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0135027N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0135027N5R01

$448.00
Picture of INGERSOLL Q0127025N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0127025N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0127025N5R01

$448.00
Picture of INGERSOLL TD2400036JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400036JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400036JGR00

$448.00
Picture of INGERSOLL TD2300035JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300035JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300035JGR00

$448.00
Picture of INGERSOLL TD2400036B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400036B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400036B7R01

$448.00
Picture of INGERSOLL TD2300034B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300034B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300034B7R01

$448.00
Picture of ISCAR DCN 0571-685-063R-12D 0.571" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0571-685-063R-12D 0.571" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0571-685-063R-12D

$446.40
Picture of ISCAR DCN 0531-639-063R-12D 0.531" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0531-639-063R-12D 0.531" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0531-639-063R-12D

$446.40