Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of TUNGALOY CTEL2020-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-2T08

ISO: CTEL2020-2T08

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-3T12

ISO: CTER2020-3T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-2T12

ISO: CTER2020-2T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFR12-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEFR12-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEFR12-4T04

ISO: CTEFR12-4T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-4T15

ISO: CTER2020-4T15

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL12-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEL12-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEL12-3T12

ISO: CTEL12-3T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFL2020-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEFL2020-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEFL2020-6T04

ISO: CTEFL2020-6T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFR2020-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEFR2020-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEFR2020-6T04

ISO: CTEFR2020-6T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-4T15

ISO: CTEL2020-4T15

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSL2020-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSL2020-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSL2020-30D

ISO: CGSSL2020-30D

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-6T12

ISO: CTER2020-6T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2020-40D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSR2020-40D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSR2020-40D

ISO: CGSSR2020-40D

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-2T12

ISO: CTEL2020-2T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-3T09

ISO: CTER2020-3T09

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-2T17

ISO: CTER2020-2T17

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-5T12

ISO: CTEL2020-5T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-3T12

ISO: CTEL2020-3T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-2T08

ISO: CTER2020-2T08

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER12-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTER12-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTER12-3T12

ISO: CTER12-3T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-4T10

ISO: CTER2020-4T10

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-4T10

ISO: CTEL2020-4T10

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL2020-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTEL2020-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTEL2020-6T12

ISO: CTEL2020-6T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER2020-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CTER2020-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CTER2020-4T25

ISO: CTER2020-4T25

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 72025R-.750* Stick Tool Clamp Down Right Hand

ARNO ROUSE 72025R-.750* Stick Tool Clamp Down Right Hand

ANSI: 72025R-.750*

ISO: 72025R-.750*

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 72025L-.750* Stick Tool Clamp Down Left Hand

ARNO ROUSE 72025L-.750* Stick Tool Clamp Down Left Hand

ANSI: 72025L-.750*

ISO: 72025L-.750*

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 19-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDR 19-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDR 19-3

ISO: GHDR 19-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 19-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDL 19-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDL 19-3

ISO: GHDL 19-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 19-4 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHGL 19-4 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHGL 19-4

ISO: GHGL 19-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 19-5 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHDL 19-5 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHDL 19-5

ISO: GHDL 19-5

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 19-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDL 19-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDL 19-4

ISO: GHDL 19-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHMPR 19 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHMPR 19 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHMPR 19

ISO: GHMPR 19

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 19-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ISCAR GHGL 19-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ANSI: GHGL 19-3

ISO: GHGL 19-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 19-2 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHGL 19-2 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHGL 19-2

ISO: GHGL 19-2

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 19-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDR 19-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDR 19-2

ISO: GHDR 19-2

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 19-2 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHGR 19-2 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHGR 19-2

ISO: GHGR 19-2

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 19-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ISCAR GHGR 19-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ANSI: GHGR 19-3

ISO: GHGR 19-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 19-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDR 19-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDR 19-4

ISO: GHDR 19-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 19-5 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHDR 19-5 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHDR 19-5

ISO: GHDR 19-5

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 19-4 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ISCAR GHGR 19-4 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.750 Tool

ANSI: GHGR 19-4

ISO: GHGR 19-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 19-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ISCAR GHDL 19-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.750 Tool

ANSI: GHDL 19-2

ISO: GHDL 19-2

Call (262) 251-4020 for pricing
Picture of ISCAR GHMUR 19 Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR GHMUR 19 Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: GHMUR 19

ISO: GHMUR 19

Call (262) 251-4020 for pricing
Picture of ISCAR TGDR 19-3M Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR TGDR 19-3M Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: TGDR 19-3M

ISO: TGDR 19-3M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDL 19-4M Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR TGDL 19-4M Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: TGDL 19-4M

ISO: TGDL 19-4M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDR 19-4M Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR TGDR 19-4M Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: TGDR 19-4M

ISO: TGDR 19-4M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDL 19-3M Grooving,Groove Turning Stick Tool 0.750 Tool

ISCAR TGDL 19-3M Grooving,Groove Turning Stick Tool 0.750 Tool

ANSI: TGDL 19-3M

ISO: TGDL 19-3M

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 72020R-.750 Stick Tool Clamp Down Right Hand

ARNO ROUSE 72020R-.750 Stick Tool Clamp Down Right Hand

ANSI: 72020R-.750

ISO: 72020R-.750

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 72020L-.750 Stick Tool Clamp Down Left Hand

ARNO ROUSE 72020L-.750 Stick Tool Clamp Down Left Hand

ANSI: 72020L-.750

ISO: 72020L-.750

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGL12M08 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.472 Shank

TUNGALOY SNGL12M08 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.472 Shank

ANSI: SNGL12M08

ISO: SNGL12M08

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGR12M08 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.472 Shank

TUNGALOY SNGR12M08 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.472 Shank

ANSI: SNGR12M08

ISO: SNGR12M08

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL2020-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSL2020-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSL2020-W30-L

ISO: CGWSL2020-W30-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL2020-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSL2020-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSL2020-W30

ISO: CGWSL2020-W30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR2020-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSR2020-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSR2020-W30-L

ISO: CGWSR2020-W30-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR2020-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSR2020-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSR2020-W20-L

ISO: CGWSR2020-W20-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR2020-W40-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSR2020-W40-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSR2020-W40-L

ISO: CGWSR2020-W40-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR2020-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSR2020-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSR2020-W30

ISO: CGWSR2020-W30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL2020-W50 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGWSL2020-W50 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGWSL2020-W50

ISO: CGWSL2020-W50

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2525-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CGSSR2525-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CGSSR2525-30

ISO: CGSSR2525-30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2525-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CGSSR2525-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CGSSR2525-20

ISO: CGSSR2525-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2525-40 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CGSSR2525-40 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CGSSR2525-40

ISO: CGSSR2525-40

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSL2525-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CGSSL2525-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CGSSL2525-30

ISO: CGSSL2525-30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSL2525-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CGSSL2525-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CGSSL2525-20

ISO: CGSSL2525-20

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-300500R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-300500R Stick Tool Clamp Down Right Hand

ANSI: 308-300500R

ISO: 308-300500R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-300500L Stick Tool Clamp Down Left Hand

ANSI: 308-300500L

ISO: 308-300500L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-150300R Stick Tool Clamp Down Right Hand

ANSI: 308-150300R

ISO: 308-150300R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-75100R Stick Tool Clamp Down Right Hand

ANSI: 308-75100R

ISO: 308-75100R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-100150L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-100150L Stick Tool Clamp Down Left Hand

ANSI: 308-100150L

ISO: 308-100150L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-100150R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-100150R Stick Tool Clamp Down Right Hand

ANSI: 308-100150R

ISO: 308-100150R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-75100L Stick Tool Clamp Down Left Hand

ANSI: 308-75100L

ISO: 308-75100L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 308-150300L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-150300L Stick Tool Clamp Down Left Hand

ANSI: 308-150300L

ISO: 308-150300L

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 4.00K-0.20 IB10H Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR GITM 4.00K-0.20 IB10H Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: GITM 4.00K-0.20 IB10H

ISO: GITM 4.00K-0.20 IB10H

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 4.00K-0.20 IB50 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR GITM 4.00K-0.20 IB50 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: GITM 4.00K-0.20 IB50

ISO: GITM 4.00K-0.20 IB50

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 4.00K-0.20 IB20H Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR GITM 4.00K-0.20 IB20H Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: GITM 4.00K-0.20 IB20H

ISO: GITM 4.00K-0.20 IB20H

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT1040L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT1040L Stick Tool Clamp Down Left Hand

ANSI: UT1040L

ISO: UT1040L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT1040R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT1040R Stick Tool Clamp Down Right Hand

ANSI: UT1040R

ISO: UT1040R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 71616L-.625 Stick Tool Clamp Down Left Hand

ARNO ROUSE 71616L-.625 Stick Tool Clamp Down Left Hand

ANSI: 71616L-.625

ISO: 71616L-.625

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 71616R-.625 Stick Tool Clamp Down Right Hand

ARNO ROUSE 71616R-.625 Stick Tool Clamp Down Right Hand

ANSI: 71616R-.625

ISO: 71616R-.625

Call (262) 251-4020 for pricing
Picture of ISCAR MGCH 06 Grooving,Groove Turning Boring Bar 0.236 Tool

ISCAR MGCH 06 Grooving,Groove Turning Boring Bar 0.236 Tool

ANSI: MGCH 06

ISO: MGCH 06

Call (262) 251-4020 for pricing
Picture of ISCAR MGCH 08 Grooving,Groove Turning Boring Bar 0.315 Tool

ISCAR MGCH 08 Grooving,Groove Turning Boring Bar 0.315 Tool

ANSI: MGCH 08

ISO: MGCH 08

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-300500R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-300500R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-300500R Kontra

ISO: 205S-300500R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-300500L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-300500L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-300500L Kontra

ISO: 204S-300500L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-100150L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-100150L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-100150L Kontra

ISO: 205S-100150L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-500XXL Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-500XXL Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-500XXL Kontra

ISO: 204S-500XXL Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-75100R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-75100R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-75100R Kontra

ISO: 204S-75100R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-6075R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-6075R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-6075R Kontra

ISO: 205S-6075R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-5060L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-5060L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-5060L Kontra

ISO: 204S-5060L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-150300R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-150300R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-150300R Kontra

ISO: 203S-150300R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-150300R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-150300R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-150300R Kontra

ISO: 205S-150300R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-500XXR Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-500XXR Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-500XXR Kontra

ISO: 205S-500XXR Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-300500R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-300500R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-300500R Kontra

ISO: 203S-300500R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-100150L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-100150L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-100150L Kontra

ISO: 203S-100150L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-6075L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-6075L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-6075L Kontra

ISO: 205S-6075L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-500XXL Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-500XXL Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-500XXL Kontra

ISO: 203S-500XXL Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-5060R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-5060R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-5060R Kontra

ISO: 204S-5060R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-500XXR Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-500XXR Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-500XXR Kontra

ISO: 203S-500XXR Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-6075R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-6075R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-6075R Kontra

ISO: 203S-6075R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-150300L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-150300L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-150300L Kontra

ISO: 203S-150300L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-75100L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-75100L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-75100L Kontra

ISO: 205S-75100L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-100150R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-100150R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-100150R Kontra

ISO: 203S-100150R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-75100R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-75100R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-75100R Kontra

ISO: 203S-75100R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-6075L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-6075L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-6075L Kontra

ISO: 203S-6075L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-75100R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-75100R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-75100R Kontra

ISO: 205S-75100R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-300500R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-300500R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-300500R Kontra

ISO: 204S-300500R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-300500L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-300500L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-300500L Kontra

ISO: 203S-300500L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-100150L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-100150L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-100150L Kontra

ISO: 204S-100150L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-5060L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-5060L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-5060L Kontra

ISO: 203S-5060L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-6075L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-6075L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-6075L Kontra

ISO: 204S-6075L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-100150R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-100150R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-100150R Kontra

ISO: 205S-100150R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-100150R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-100150R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-100150R Kontra

ISO: 204S-100150R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-75100L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 203S-75100L Kontra Stick Tool Clamp Down Left Hand

ANSI: 203S-75100L Kontra

ISO: 203S-75100L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-150300L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-150300L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-150300L Kontra

ISO: 205S-150300L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-5060L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-5060L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-5060L Kontra

ISO: 205S-5060L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-150300L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-150300L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-150300L Kontra

ISO: 204S-150300L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 203S-5060R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 203S-5060R Kontra Stick Tool Clamp Down Right Hand

ANSI: 203S-5060R Kontra

ISO: 203S-5060R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-6075R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-6075R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-6075R Kontra

ISO: 204S-6075R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-500XXR Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-500XXR Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-500XXR Kontra

ISO: 204S-500XXR Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-150300R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 204S-150300R Kontra Stick Tool Clamp Down Right Hand

ANSI: 204S-150300R Kontra

ISO: 204S-150300R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-5060R Kontra Stick Tool Clamp Down Right Hand

ARNO ROUSE 205S-5060R Kontra Stick Tool Clamp Down Right Hand

ANSI: 205S-5060R Kontra

ISO: 205S-5060R Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 205S-300500L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 205S-300500L Kontra Stick Tool Clamp Down Left Hand

ANSI: 205S-300500L Kontra

ISO: 205S-300500L Kontra

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 204S-75100L Kontra Stick Tool Clamp Down Left Hand

ARNO ROUSE 204S-75100L Kontra Stick Tool Clamp Down Left Hand

ANSI: 204S-75100L Kontra

ISO: 204S-75100L Kontra

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-1.50 IB20H Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-1.50 IB20H Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-1.50 IB20H

ISO: GITM 3.00K-1.50 IB20H

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-1.50 IB50 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-1.50 IB50 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-1.50 IB50

ISO: GITM 3.00K-1.50 IB50

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-1.50 IB10H Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-1.50 IB10H Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-1.50 IB10H

ISO: GITM 3.00K-1.50 IB10H

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 71216R-.500 Stick Tool Clamp Down Right Hand

ARNO ROUSE 71216R-.500 Stick Tool Clamp Down Right Hand

ANSI: 71216R-.500

ISO: 71216R-.500

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 71216L-.500 Stick Tool Clamp Down Left Hand

ARNO ROUSE 71216L-.500 Stick Tool Clamp Down Left Hand

ANSI: 71216L-.500

ISO: 71216L-.500

Call (262) 251-4020 for pricing
Picture of ISCAR GIPA 3.00-0.20-D ID5 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GIPA 3.00-0.20-D ID5 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GIPA 3.00-0.20-D ID5

ISO: GIPA 3.00-0.20-D ID5

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL25.4-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

INGERSOLL RGEL25.4-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

ANSI: RGEL25.4-2T16

ISO: RGEL25.4-2T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL25.4-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

INGERSOLL RGEL25.4-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

ANSI: RGEL25.4-3T16

ISO: RGEL25.4-3T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER25.4-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

INGERSOLL RGER25.4-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

ANSI: RGER25.4-3T16

ISO: RGER25.4-3T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER25.4-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

INGERSOLL RGER25.4-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 1.000

ANSI: RGER25.4-2T16

ISO: RGER25.4-2T16

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-500XXL Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-500XXL Stick Tool Clamp Down Left Hand

ANSI: UT6-500XXL

ISO: UT6-500XXL

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-100150L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-100150L Stick Tool Clamp Down Left Hand

ANSI: UT6-100150L

ISO: UT6-100150L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-75100L Stick Tool Clamp Down Left Hand

ANSI: UT6-75100L

ISO: UT6-75100L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT832L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT832L Stick Tool Clamp Down Left Hand

ANSI: UT832L

ISO: UT832L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-150300L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-150300L Stick Tool Clamp Down Left Hand

ANSI: UT6-150300L

ISO: UT6-150300L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-500XXR Stick Tool Clamp Down Right Hand

ARNO ROUSE UT6-500XXR Stick Tool Clamp Down Right Hand

ANSI: UT6-500XXR

ISO: UT6-500XXR

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT6-75100R Stick Tool Clamp Down Right Hand

ANSI: UT6-75100R

ISO: UT6-75100R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-300500L Stick Tool Clamp Down Left Hand

ANSI: UT6-300500L

ISO: UT6-300500L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT832R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT832R Stick Tool Clamp Down Right Hand

ANSI: UT832R

ISO: UT832R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT6-150300R Stick Tool Clamp Down Right Hand

ANSI: UT6-150300R

ISO: UT6-150300R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT6-5060L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT6-5060L Stick Tool Clamp Down Left Hand

ANSI: UT6-5060L

ISO: UT6-5060L

Call (262) 251-4020 for pricing
Picture of INGERSOLL TSG5.0-0.3-HF TB2015 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius

INGERSOLL TSG5.0-0.3-HF TB2015 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius

ANSI: TSG5.0-0.3-HF TB2015

ISO: TSG5.0-0.3-HF TB2015

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-0.20 IB20H Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-0.20 IB20H Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-0.20 IB20H

ISO: GITM 3.00K-0.20 IB20H

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-0.20 IB50 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-0.20 IB50 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-0.20 IB50

ISO: GITM 3.00K-0.20 IB50

Call (262) 251-4020 for pricing
Picture of ISCAR GITM 3.00K-0.20 IB10H Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GITM 3.00K-0.20 IB10H Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GITM 3.00K-0.20 IB10H

ISO: GITM 3.00K-0.20 IB10H

Call (262) 251-4020 for pricing
Picture of TUNGALOY JSXGL2525K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY JSXGL2525K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: JSXGL2525K8

ISO: JSXGL2525K8

Call (262) 251-4020 for pricing
Picture of TUNGALOY JSXGR2525K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY JSXGR2525K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: JSXGR2525K8

ISO: JSXGR2525K8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTR2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTR2525M22-2

ISO: TGTTR2525M22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTL2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTL2525M22-2

ISO: TGTTL2525M22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTL2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTL2525M22-1

ISO: TGTTL2525M22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTL2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTL2525M22-3

ISO: TGTTL2525M22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTL2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTL2525M16

ISO: TGTTL2525M16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTR2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTR2525M16

ISO: TGTTR2525M16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTR2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTR2525M22-3

ISO: TGTTR2525M22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTTR2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTTR2525M22-1

ISO: TGTTR2525M22-1

Call (262) 251-4020 for pricing
Picture of ISCAR HELIR 1616-4T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIR 1616-4T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIR 1616-4T20

ISO: HELIR 1616-4T20

Call (262) 251-4020 for pricing
Picture of ISCAR HELIR 1616-3T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIR 1616-3T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIR 1616-3T20

ISO: HELIR 1616-3T20

Call (262) 251-4020 for pricing
Picture of ISCAR HELIL 1616-4T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIL 1616-4T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIL 1616-4T12

ISO: HELIL 1616-4T12

Call (262) 251-4020 for pricing
Picture of ISCAR HELIR 1616-4T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIR 1616-4T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIR 1616-4T12

ISO: HELIR 1616-4T12

Call (262) 251-4020 for pricing
Picture of ISCAR HELIL 1616-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIL 1616-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIL 1616-3T12

ISO: HELIL 1616-3T12

Call (262) 251-4020 for pricing
Picture of ISCAR HELIR 1616-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIR 1616-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIR 1616-3T12

ISO: HELIR 1616-3T12

Call (262) 251-4020 for pricing
Picture of ISCAR HELIL 1616-4T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIL 1616-4T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIL 1616-4T20

ISO: HELIL 1616-4T20

Call (262) 251-4020 for pricing
Picture of ISCAR HELIL 1616-3T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR HELIL 1616-3T20 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: HELIL 1616-3T20

ISO: HELIL 1616-3T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY S20Q-CGTR30 Clamp Down Grooving,Groove Turning Boring Bar Steel Round 0.787 Shank

TUNGALOY S20Q-CGTR30 Clamp Down Grooving,Groove Turning Boring Bar Steel Round 0.787 Shank

ANSI: S20Q-CGTR30

ISO: S20Q-CGTR30

Call (262) 251-4020 for pricing
Picture of ISCAR GHMUL 16 Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR GHMUL 16 Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: GHMUL 16

ISO: GHMUL 16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL19-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

INGERSOLL RGEL19-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

ANSI: RGEL19-3T16

ISO: RGEL19-3T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER19-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

INGERSOLL RGER19-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

ANSI: RGER19-3T16

ISO: RGER19-3T16

Call (262) 251-4020 for pricing
Picture of ISCAR GHMUR 16 Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR GHMUR 16 Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: GHMUR 16

ISO: GHMUR 16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL19-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

INGERSOLL RGEL19-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

ANSI: RGEL19-2T16

ISO: RGEL19-2T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER19-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

INGERSOLL RGER19-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.750

ANSI: RGER19-2T16

ISO: RGER19-2T16

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT627R Boring Bar Adapter Blade Right Hand

ARNO ROUSE 9-UT627R Boring Bar Adapter Blade Right Hand

ANSI: 9-UT627R

ISO: 9-UT627R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT627L Boring Bar Adapter Blade Left Hand

ARNO ROUSE 9-UT627L Boring Bar Adapter Blade Left Hand

ANSI: 9-UT627L

ISO: 9-UT627L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-2T12

ISO: CTER1616-2T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-2T08

ISO: CTER1616-2T08

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-4T25

ISO: CTER1616-4T25

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-3T09

ISO: CTER1616-3T09

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-4T10

ISO: CTER1616-4T10

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-2T12

ISO: CTEL1616-2T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-2T17

ISO: CTEL1616-2T17

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-3T20

ISO: CTER1616-3T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTER1616-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTER1616-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTER1616-2T17

ISO: CTER1616-2T17

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-3T09

ISO: CTEL1616-3T09

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-2T08

ISO: CTEL1616-2T08

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-4T10

ISO: CTEL1616-4T10

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-4T25

ISO: CTEL1616-4T25

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEL1616-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CTEL1616-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CTEL1616-3T20

ISO: CTEL1616-3T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTL2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTL2020K22-2

ISO: TGTTL2020K22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTR2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTR2020K22-3

ISO: TGTTR2020K22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTR2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTR2020K22-1

ISO: TGTTR2020K22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTR2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTR2020K16

ISO: TGTTR2020K16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTL2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTL2020K22-1

ISO: TGTTL2020K22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTL2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTL2020K22-3

ISO: TGTTL2020K22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTR2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTR2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTR2020K22-2

ISO: TGTTR2020K22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTTL2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTTL2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTTL2020K16

ISO: TGTTL2020K16

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 16-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ISCAR GHDR 16-4 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ANSI: GHDR 16-4

ISO: GHDR 16-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 16-3 ST Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ISCAR GHGR 16-3 ST Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ANSI: GHGR 16-3 ST

ISO: GHGR 16-3 ST

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 16-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ISCAR GHGR 16-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ANSI: GHGR 16-3

ISO: GHGR 16-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 16-3 ST Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR GHGL 16-3 ST Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: GHGL 16-3 ST

ISO: GHGL 16-3 ST

Call (262) 251-4020 for pricing
Picture of ISCAR PHGL 16-2.4 Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR PHGL 16-2.4 Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: PHGL 16-2.4

ISO: PHGL 16-2.4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 16-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ISCAR GHDR 16-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ANSI: GHDR 16-3

ISO: GHDR 16-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 16-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ISCAR GHGL 16-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.629 Tool

ANSI: GHGL 16-3

ISO: GHGL 16-3

Call (262) 251-4020 for pricing