Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR GHDR 16-4 ST Cut Off,Grooving,Groove Turning,Polley V Grooving Stick Tool 0.629 Tool

ISCAR GHDR 16-4 ST Cut Off,Grooving,Groove Turning,Polley V Grooving Stick Tool 0.629 Tool

ANSI: GHDR 16-4 ST

ISO: GHDR 16-4 ST

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 16-3 ST Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ISCAR GHDL 16-3 ST Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ANSI: GHDL 16-3 ST

ISO: GHDL 16-3 ST

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 16-3 ST Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ISCAR GHDR 16-3 ST Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ANSI: GHDR 16-3 ST

ISO: GHDR 16-3 ST

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 16-4 Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR GHGR 16-4 Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: GHGR 16-4

ISO: GHGR 16-4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 16-4 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR GHDL 16-4 Cut Off,Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: GHDL 16-4

ISO: GHDL 16-4

Call (262) 251-4020 for pricing
Picture of ISCAR PHGR 16-2.4 Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR PHGR 16-2.4 Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: PHGR 16-2.4

ISO: PHGR 16-2.4

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 16-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ISCAR GHDL 16-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.629 Tool

ANSI: GHDL 16-3

ISO: GHDL 16-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY JCTEL1414-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

TUNGALOY JCTEL1414-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

ANSI: JCTEL1414-2T12

ISO: JCTEL1414-2T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY JCTEL1414-1.4T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

TUNGALOY JCTEL1414-1.4T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

ANSI: JCTEL1414-1.4T12

ISO: JCTEL1414-1.4T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY JCTER1414-1.4T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

TUNGALOY JCTER1414-1.4T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

ANSI: JCTER1414-1.4T12

ISO: JCTER1414-1.4T12

Call (262) 251-4020 for pricing
Picture of ISCAR GHSL 9.5-2 Grooving,Groove Turning Stick Tool 0.375 Tool

ISCAR GHSL 9.5-2 Grooving,Groove Turning Stick Tool 0.375 Tool

ANSI: GHSL 9.5-2

ISO: GHSL 9.5-2

Call (262) 251-4020 for pricing
Picture of ISCAR HELIR 12.7-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.500 Tool

ISCAR HELIR 12.7-3T12 Cut Off,Grooving,Groove Turning Stick Tool 0.500 Tool

ANSI: HELIR 12.7-3T12

ISO: HELIR 12.7-3T12

Call (262) 251-4020 for pricing
Picture of TUNGALOY JCTER1414-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

TUNGALOY JCTER1414-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.551 Shank

ANSI: JCTER1414-2T12

ISO: JCTER1414-2T12

Call (262) 251-4020 for pricing
Picture of ISCAR GIPA 8-35V-1.20-D ID5 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ISCAR GIPA 8-35V-1.20-D ID5 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ANSI: GIPA 8-35V-1.20-D ID5

ISO: GIPA 8-35V-1.20-D ID5

Call (262) 251-4020 for pricing
Picture of ISCAR GHMUR 12.7 Grooving,Groove Turning Stick Tool 0.500 Tool

ISCAR GHMUR 12.7 Grooving,Groove Turning Stick Tool 0.500 Tool

ANSI: GHMUR 12.7

ISO: GHMUR 12.7

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGR10K08 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

TUNGALOY SNGR10K08 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

ANSI: SNGR10K08

ISO: SNGR10K08

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGL10K08 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

TUNGALOY SNGL10K08 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

ANSI: SNGL10K08

ISO: SNGL10K08

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGR10K07 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

TUNGALOY SNGR10K07 Screw On Grooving,Groove Turning Boring Bar Steel Boring Bar 0.393 Shank

ANSI: SNGR10K07

ISO: SNGR10K07

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2020-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSR2020-20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSR2020-20

ISO: CGSSR2020-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2020-50 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSR2020-50 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSR2020-50

ISO: CGSSR2020-50

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2020-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSR2020-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSR2020-30

ISO: CGSSR2020-30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSL2020-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSL2020-30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSL2020-30

ISO: CGSSL2020-30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR2020-40 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY CGSSR2020-40 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: CGSSR2020-40

ISO: CGSSR2020-40

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-150300L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT5-150300L Stick Tool Clamp Down Left Hand

ANSI: UT5-150300L

ISO: UT5-150300L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-500XXR Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-500XXR Stick Tool Clamp Down Right Hand

ANSI: UT5-500XXR

ISO: UT5-500XXR

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-5060L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT3-5060L Stick Tool Clamp Down Left Hand

ANSI: UT3-5060L

ISO: UT3-5060L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-150300R Stick Tool Clamp Down Right Hand

ANSI: UT5-150300R

ISO: UT5-150300R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-6075R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-6075R Stick Tool Clamp Down Right Hand

ANSI: UT5-6075R

ISO: UT5-6075R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-300500L Stick Tool Clamp Down Left Hand

ANSI: UT4-300500L

ISO: UT4-300500L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-100150R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-100150R Stick Tool Clamp Down Right Hand

ANSI: UT3-100150R

ISO: UT3-100150R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-500XXR Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-500XXR Stick Tool Clamp Down Right Hand

ANSI: UT4-500XXR

ISO: UT4-500XXR

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-75100R Stick Tool Clamp Down Right Hand

ANSI: UT5-75100R

ISO: UT5-75100R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-75100R Stick Tool Clamp Down Right Hand

ANSI: UT4-75100R

ISO: UT4-75100R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-5060R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-5060R Stick Tool Clamp Down Right Hand

ANSI: UT3-5060R

ISO: UT3-5060R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT3-300500L Stick Tool Clamp Down Left Hand

ANSI: UT3-300500L

ISO: UT3-300500L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-100150L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT3-100150L Stick Tool Clamp Down Left Hand

ANSI: UT3-100150L

ISO: UT3-100150L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-100150R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-100150R Stick Tool Clamp Down Right Hand

ANSI: UT5-100150R

ISO: UT5-100150R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-6075L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT3-6075L Stick Tool Clamp Down Left Hand

ANSI: UT3-6075L

ISO: UT3-6075L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-150300L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-150300L Stick Tool Clamp Down Left Hand

ANSI: UT4-150300L

ISO: UT4-150300L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-6075R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-6075R Stick Tool Clamp Down Right Hand

ANSI: UT3-6075R

ISO: UT3-6075R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-100150L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT5-100150L Stick Tool Clamp Down Left Hand

ANSI: UT5-100150L

ISO: UT5-100150L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-5060L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT5-5060L Stick Tool Clamp Down Left Hand

ANSI: UT5-5060L

ISO: UT5-5060L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT5-75100L Stick Tool Clamp Down Left Hand

ANSI: UT5-75100L

ISO: UT5-75100L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-75100R Stick Tool Clamp Down Right Hand

ANSI: UT3-75100R

ISO: UT3-75100R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-5060R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-5060R Stick Tool Clamp Down Right Hand

ANSI: UT4-5060R

ISO: UT4-5060R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT3-75100L Stick Tool Clamp Down Left Hand

ANSI: UT3-75100L

ISO: UT3-75100L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-6075R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-6075R Stick Tool Clamp Down Right Hand

ANSI: UT4-6075R

ISO: UT4-6075R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-500XXL Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-500XXL Stick Tool Clamp Down Left Hand

ANSI: UT4-500XXL

ISO: UT4-500XXL

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-100150R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-100150R Stick Tool Clamp Down Right Hand

ANSI: UT4-100150R

ISO: UT4-100150R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-300500R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-300500R Stick Tool Clamp Down Right Hand

ANSI: UT4-300500R

ISO: UT4-300500R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-5060R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-5060R Stick Tool Clamp Down Right Hand

ANSI: UT5-5060R

ISO: UT5-5060R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT5-300500L Stick Tool Clamp Down Left Hand

ANSI: UT5-300500L

ISO: UT5-300500L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-6075L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-6075L Stick Tool Clamp Down Left Hand

ANSI: UT4-6075L

ISO: UT4-6075L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT4-150300R Stick Tool Clamp Down Right Hand

ANSI: UT4-150300R

ISO: UT4-150300R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-300500R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-300500R Stick Tool Clamp Down Right Hand

ANSI: UT3-300500R

ISO: UT3-300500R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-5060L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-5060L Stick Tool Clamp Down Left Hand

ANSI: UT4-5060L

ISO: UT4-5060L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT4-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT4-75100L Stick Tool Clamp Down Left Hand

ANSI: UT4-75100L

ISO: UT4-75100L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT3-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT3-150300R Stick Tool Clamp Down Right Hand

ANSI: UT3-150300R

ISO: UT3-150300R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE UT5-300500R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT5-300500R Stick Tool Clamp Down Right Hand

ANSI: UT5-300500R

ISO: UT5-300500R

Call (262) 251-4020 for pricing
Picture of SECO LCGN160504-0500S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGN160504-0500S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGN160504-0500S-00425-LF CBN010

ISO: LCGN160504-0500S-00425-LF CBN010

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR16-4-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY TGTSR16-4-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: TGTSR16-4-1

ISO: TGTSR16-4-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR16-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY TGTSR16-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: TGTSR16-3

ISO: TGTSR16-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR16-4-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY TGTSR16-4-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: TGTSR16-4-2

ISO: TGTSR16-4-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR16-4-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY TGTSR16-4-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: TGTSR16-4-3

ISO: TGTSR16-4-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSR2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSR2525M16

ISO: TGTSR2525M16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSL2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSL2525M22-3

ISO: TGTSL2525M22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSR2525M22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSR2525M22-3

ISO: TGTSR2525M22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSL2525M16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSL2525M16

ISO: TGTSL2525M16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSR2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSR2525M22-1

ISO: TGTSR2525M22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSL2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSL2525M22-2

ISO: TGTSL2525M22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSL2525M22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSL2525M22-1

ISO: TGTSL2525M22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY TGTSR2525M22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: TGTSR2525M22-2

ISO: TGTSR2525M22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSL1616-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGSSL1616-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGSSL1616-30D

ISO: CGSSL1616-30D

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGSSR1616-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGSSR1616-30D Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGSSR1616-30D

ISO: CGSSR1616-30D

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFR12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEFR12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEFR12-6T04

ISO: CTEFR12-6T04

Call (262) 251-4020 for pricing
Picture of ISCAR GHGL 12.7-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.500 Tool

ISCAR GHGL 12.7-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.500 Tool

ANSI: GHGL 12.7-3

ISO: GHGL 12.7-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 12.7-3 Cut Off,Grooving,Groove Turning Stick Tool 0.500 Tool

ISCAR GHDL 12.7-3 Cut Off,Grooving,Groove Turning Stick Tool 0.500 Tool

ANSI: GHDL 12.7-3

ISO: GHDL 12.7-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 12.7-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ISCAR GHDR 12.7-3 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ANSI: GHDR 12.7-3

ISO: GHDR 12.7-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHGR 12.7-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.500 Tool

ISCAR GHGR 12.7-3 Back Turning,Grooving,Groove Turning,Groove Threading Stick Tool 0.500 Tool

ANSI: GHGR 12.7-3

ISO: GHGR 12.7-3

Call (262) 251-4020 for pricing
Picture of ISCAR GHMPL 12.7 Grooving,Groove Turning Stick Tool 0.500 Tool

ISCAR GHMPL 12.7 Grooving,Groove Turning Stick Tool 0.500 Tool

ANSI: GHMPL 12.7

ISO: GHMPL 12.7

Call (262) 251-4020 for pricing
Picture of ISCAR GHDL 12.7-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ISCAR GHDL 12.7-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ANSI: GHDL 12.7-2

ISO: GHDL 12.7-2

Call (262) 251-4020 for pricing
Picture of ISCAR GHDR 12.7-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ISCAR GHDR 12.7-2 Grooving,Groove Turning,Groove Threading,Pully V Groove Stick Tool 0.500 Tool

ANSI: GHDR 12.7-2

ISO: GHDR 12.7-2

Call (262) 251-4020 for pricing
Picture of INGERSOLL TSG3.0-0.3-HF TB2015 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

INGERSOLL TSG3.0-0.3-HF TB2015 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ANSI: TSG3.0-0.3-HF TB2015

ISO: TSG3.0-0.3-HF TB2015

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL1616-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSL1616-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSL1616-W30

ISO: CGWSL1616-W30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL1616-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSL1616-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSL1616-W20-L

ISO: CGWSL1616-W20-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR1616-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSR1616-W30 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSR1616-W30

ISO: CGWSR1616-W30

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR1616-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSR1616-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSR1616-W30-L

ISO: CGWSR1616-W30-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSL1616-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSL1616-W30-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSL1616-W30-L

ISO: CGWSL1616-W30-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGWSR1616-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

TUNGALOY CGWSR1616-W20-L Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.629 Shank

ANSI: CGWSR1616-W20-L

ISO: CGWSR1616-W20-L

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSR2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSR2020K16

ISO: TGTSR2020K16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSR2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSR2020K22-1

ISO: TGTSR2020K22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSL2020K16 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSL2020K16

ISO: TGTSL2020K16

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSL2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSL2020K22-3

ISO: TGTSL2020K22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSR2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSR2020K22-2

ISO: TGTSR2020K22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSL2020K22-1 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSL2020K22-1

ISO: TGTSL2020K22-1

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSR2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSR2020K22-3 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSR2020K22-3

ISO: TGTSR2020K22-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGTSL2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY TGTSL2020K22-2 On Edge Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: TGTSL2020K22-2

ISO: TGTSL2020K22-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGR08H07 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

TUNGALOY SNGR08H07 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

ANSI: SNGR08H07

ISO: SNGR08H07

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGL08H07 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

TUNGALOY SNGL08H07 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

ANSI: SNGL08H07

ISO: SNGL08H07

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGL08H06 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

TUNGALOY SNGL08H06 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

ANSI: SNGL08H06

ISO: SNGL08H06

Call (262) 251-4020 for pricing
Picture of TUNGALOY SNGR08H06 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

TUNGALOY SNGR08H06 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.315 Shank

ANSI: SNGR08H06

ISO: SNGR08H06

Call (262) 251-4020 for pricing
Picture of ISCAR TGDL 1616-4M Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR TGDL 1616-4M Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: TGDL 1616-4M

ISO: TGDL 1616-4M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDR 1616-3M Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR TGDR 1616-3M Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: TGDR 1616-3M

ISO: TGDR 1616-3M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDL 1616-3M Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR TGDL 1616-3M Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: TGDL 1616-3M

ISO: TGDL 1616-3M

Call (262) 251-4020 for pricing
Picture of ISCAR TGDR 1616-4M Grooving,Groove Turning Stick Tool 0.629 Tool

ISCAR TGDR 1616-4M Grooving,Groove Turning Stick Tool 0.629 Tool

ANSI: TGDR 1616-4M

ISO: TGDR 1616-4M

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT522R Boring Bar Adapter Blade Right Hand

ARNO ROUSE 9-UT522R Boring Bar Adapter Blade Right Hand

ANSI: 9-UT522R

ISO: 9-UT522R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT522L Boring Bar Adapter Blade Left Hand

ARNO ROUSE 9-UT522L Boring Bar Adapter Blade Left Hand

ANSI: 9-UT522L

ISO: 9-UT522L

Call (262) 251-4020 for pricing
Picture of SECO LCGN160404-0400S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGN160404-0400S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGN160404-0400S-00425-LF CBN010

ISO: LCGN160404-0400S-00425-LF CBN010

Call (262) 251-4020 for pricing
Picture of ISCAR PADR 2.4 Grooving,Groove Turning Adapter Blade Tool

ISCAR PADR 2.4 Grooving,Groove Turning Adapter Blade Tool

ANSI: PADR 2.4

ISO: PADR 2.4

Call (262) 251-4020 for pricing
Picture of ISCAR PADL 2.4 Grooving,Groove Turning Adapter Blade Tool

ISCAR PADL 2.4 Grooving,Groove Turning Adapter Blade Tool

ANSI: PADL 2.4

ISO: PADL 2.4

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 5L-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 5L-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 5L-T22

ISO: CGPAD 5L-T22

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 5L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 5L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 5L-T16

ISO: CGPAD 5L-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 5R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 5R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 5R-T22

ISO: CGPAD 5R-T22

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 3L-T16 Grooving,Groove Turning Adapter Blade Tool

ISCAR CGPAD 3L-T16 Grooving,Groove Turning Adapter Blade Tool

ANSI: CGPAD 3L-T16

ISO: CGPAD 3L-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 4R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 4R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 4R-T16

ISO: CGPAD 4R-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 4L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 4L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 4L-T16

ISO: CGPAD 4L-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 8R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 8R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 8R-T22

ISO: CGPAD 8R-T22

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER15.9-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

INGERSOLL RGER15.9-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

ANSI: RGER15.9-2T16

ISO: RGER15.9-2T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 4R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 4R-T22 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 4R-T22

ISO: CGPAD 4R-T22

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 4L-T22 Grooving,Groove Turning Adapter Blade Tool

ISCAR CGPAD 4L-T22 Grooving,Groove Turning Adapter Blade Tool

ANSI: CGPAD 4L-T22

ISO: CGPAD 4L-T22

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL15.9-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

INGERSOLL RGEL15.9-2T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

ANSI: RGEL15.9-2T16

ISO: RGEL15.9-2T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 3L-T22 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Adapter Blade

ISCAR CGPAD 3L-T22 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Adapter Blade

ANSI: CGPAD 3L-T22

ISO: CGPAD 3L-T22

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGEL15.9-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

INGERSOLL RGEL15.9-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

ANSI: RGEL15.9-3T16

ISO: RGEL15.9-3T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 3R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 3R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 3R-T16

ISO: CGPAD 3R-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 3R-T22 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Adapter Blade

ISCAR CGPAD 3R-T22 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Adapter Blade

ANSI: CGPAD 3R-T22

ISO: CGPAD 3R-T22

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 8R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 8R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 8R-T16

ISO: CGPAD 8R-T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 8L-T22 Grooving,Groove Turning Adapter Blade Tool

ISCAR CGPAD 8L-T22 Grooving,Groove Turning Adapter Blade Tool

ANSI: CGPAD 8L-T22

ISO: CGPAD 8L-T22

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 8L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 8L-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 8L-T16

ISO: CGPAD 8L-T16

Call (262) 251-4020 for pricing
Picture of INGERSOLL RGER15.9-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

INGERSOLL RGER15.9-3T16 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Clamp Down Square 0.625

ANSI: RGER15.9-3T16

ISO: RGER15.9-3T16

Call (262) 251-4020 for pricing
Picture of ISCAR CGPAD 5R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR CGPAD 5R-T16 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: CGPAD 5R-T16

ISO: CGPAD 5R-T16

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAER-3T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-3T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-3T16

ISO: CAER-3T16

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAEL-5T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-5T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-5T20

ISO: CAEL-5T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAER-5T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-5T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-5T20

ISO: CAER-5T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAER-4T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-4T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-4T16

ISO: CAER-4T16

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAEL-3T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-3T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-3T16

ISO: CAEL-3T16

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAEL-4T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-4T16 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-4T16

ISO: CAEL-4T16

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAEL-6T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-6T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-6T20

ISO: CAEL-6T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY CAER-6T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-6T20 Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-6T20

ISO: CAER-6T20

Call (262) 251-4020 for pricing
Picture of TUNGALOY JSXGL2020K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY JSXGL2020K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: JSXGL2020K8

ISO: JSXGL2020K8

Call (262) 251-4020 for pricing
Picture of TUNGALOY JSXGR2020K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

TUNGALOY JSXGR2020K8 On Edge Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.787 Shank

ANSI: JSXGR2020K8

ISO: JSXGR2020K8

Call (262) 251-4020 for pricing
Picture of SECO LCGN160304-0300S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGN160304-0300S-00425-LF CBN010 Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGN160304-0300S-00425-LF CBN010

ISO: LCGN160304-0300S-00425-LF CBN010

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 5R-T16 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 5R-T16 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 5R-T16

ISO: TGPAD 5R-T16

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 4L-T16 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 4L-T16 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 4L-T16

ISO: TGPAD 4L-T16

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 6R-T22 Grooving,Groove Turning Stick Tool

ISCAR TGPAD 6R-T22 Grooving,Groove Turning Stick Tool

ANSI: TGPAD 6R-T22

ISO: TGPAD 6R-T22

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 3L-T9 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 3L-T9 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 3L-T9

ISO: TGPAD 3L-T9

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 3R-T9 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 3R-T9 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 3R-T9

ISO: TGPAD 3R-T9

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 5L-T16 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 5L-T16 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 5L-T16

ISO: TGPAD 5L-T16

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 4R-T16 Grooving,Groove Turning Adapter Blade

ISCAR TGPAD 4R-T16 Grooving,Groove Turning Adapter Blade

ANSI: TGPAD 4R-T16

ISO: TGPAD 4R-T16

Call (262) 251-4020 for pricing
Picture of ISCAR TGPAD 6L-T22 Grooving,Groove Turning Stick Tool

ISCAR TGPAD 6L-T22 Grooving,Groove Turning Stick Tool

ANSI: TGPAD 6L-T22

ISO: TGPAD 6L-T22

Call (262) 251-4020 for pricing
Picture of TUNGALOY SGN400-020 BX360 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.157 Wide

TUNGALOY SGN400-020 BX360 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.157 Wide

ANSI: SGN400-020 BX360

ISO: SGN400-020 BX360

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 6L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 6L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 6L-T12

ISO: HGPAD 6L-T12

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 32-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 32-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 32-3

ISO: GAIR 32-3

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 4L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 4L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 4L-T20

ISO: HGPAD 4L-T20

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 4R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 4R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 4R-T12

ISO: HGPAD 4R-T12

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 40-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 40-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 40-5

ISO: GAIL 40-5

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 32-3 Grooving,Groove Turning Adapter Blade Tool

ISCAR GAIL 32-3 Grooving,Groove Turning Adapter Blade Tool

ANSI: GAIL 32-3

ISO: GAIL 32-3

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 32-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 32-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 32-5

ISO: GAIL 32-5

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 40-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 40-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 40-2

ISO: GAIR 40-2

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 32-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 32-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 32-2

ISO: GAIR 32-2

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 40-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 40-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 40-2

ISO: GAIL 40-2

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 32-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 32-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 32-4

ISO: GAIL 32-4

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 4R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 4R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 4R-T20

ISO: HGPAD 4R-T20

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 3L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 3L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 3L-T20

ISO: HGPAD 3L-T20

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 32-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 32-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 32-5

ISO: GAIR 32-5

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 3L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 3L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 3L-T12

ISO: HGPAD 3L-T12

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 3R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 3R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 3R-T12

ISO: HGPAD 3R-T12

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 40-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 40-5 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 40-5

ISO: GAIR 40-5

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 5L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 5L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 5L-T12

ISO: HGPAD 5L-T12

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 5R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 5R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 5R-T12

ISO: HGPAD 5R-T12

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 32-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 32-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 32-4

ISO: GAIR 32-4

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 40-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 40-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 40-3

ISO: GAIR 40-3

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 32-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 32-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 32-2

ISO: GAIL 32-2

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 40-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 40-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 40-3

ISO: GAIL 40-3

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 3R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 3R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 3R-T20

ISO: HGPAD 3R-T20

Call (262) 251-4020 for pricing
Picture of ISCAR GAIR 40-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIR 40-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIR 40-4

ISO: GAIR 40-4

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 5L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 5L-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 5L-T20

ISO: HGPAD 5L-T20

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 4L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 4L-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 4L-T12

ISO: HGPAD 4L-T12

Call (262) 251-4020 for pricing
Picture of ISCAR GAIL 40-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GAIL 40-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GAIL 40-4

ISO: GAIL 40-4

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 6R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 6R-T12 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 6R-T12

ISO: HGPAD 6R-T12

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 5R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 5R-T20 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 5R-T20

ISO: HGPAD 5R-T20

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 6R-T22 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 6R-T22 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 6R-T22

ISO: HGPAD 6R-T22

Call (262) 251-4020 for pricing
Picture of ISCAR HGPAD 6L-T22 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ISCAR HGPAD 6L-T22 Cut Off,Grooving,Groove Turning Adapter Blade Tool

ANSI: HGPAD 6L-T22

ISO: HGPAD 6L-T22

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT419R Boring Bar Adapter Blade Right Hand

ARNO ROUSE 9-UT419R Boring Bar Adapter Blade Right Hand

ANSI: 9-UT419R

ISO: 9-UT419R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 31025R Stick Tool Clamp Down Right Hand

ARNO ROUSE 31025R Stick Tool Clamp Down Right Hand

ANSI: 31025R

ISO: 31025R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 31025L Stick Tool Clamp Down Left Hand

ARNO ROUSE 31025L Stick Tool Clamp Down Left Hand

ANSI: 31025L

ISO: 31025L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE 9-UT419L Boring Bar Adapter Blade Left Hand

ARNO ROUSE 9-UT419L Boring Bar Adapter Blade Left Hand

ANSI: 9-UT419L

ISO: 9-UT419L

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 20-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 20-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 20-3

ISO: GEAIR 20-3

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 20-3 Grooving,Groove Turning Adapter Blade Tool

ISCAR GEAIL 20-3 Grooving,Groove Turning Adapter Blade Tool

ANSI: GEAIL 20-3

ISO: GEAIL 20-3

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 25-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 25-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 25-2

ISO: GEAIR 25-2

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 20-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 20-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 20-2

ISO: GEAIR 20-2

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 25-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 25-3 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 25-3

ISO: GEAIR 25-3

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 25-3 Grooving,Groove Turning Adapter Blade Tool

ISCAR GEAIL 25-3 Grooving,Groove Turning Adapter Blade Tool

ANSI: GEAIL 25-3

ISO: GEAIL 25-3

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 25-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 25-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 25-4

ISO: GEAIR 25-4

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 20-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIL 20-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIL 20-4

ISO: GEAIL 20-4

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIR 20-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIR 20-4 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIR 20-4

ISO: GEAIR 20-4

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 20-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIL 20-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIL 20-2

ISO: GEAIL 20-2

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 25-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ISCAR GEAIL 25-2 Grooving,Groove Turning,Groove Threading Adapter Blade Tool

ANSI: GEAIL 25-2

ISO: GEAIL 25-2

Call (262) 251-4020 for pricing
Picture of ISCAR GEAIL 25-4 Grooving,Groove Turning Boring Bar 1.000 Tool

ISCAR GEAIL 25-4 Grooving,Groove Turning Boring Bar 1.000 Tool

ANSI: GEAIL 25-4

ISO: GEAIL 25-4

Call (262) 251-4020 for pricing
Picture of INGERSOLL SFGB32-1.6 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

INGERSOLL SFGB32-1.6 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

ANSI: SFGB32-1.6

ISO: SFGB32-1.6

Call (262) 251-4020 for pricing
Picture of INGERSOLL SFGB32-3 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

INGERSOLL SFGB32-3 Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

ANSI: SFGB32-3

ISO: SFGB32-3

Call (262) 251-4020 for pricing