Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR HELIR 25.4-6T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR HELIR 25.4-6T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: HELIR 25.4-6T12

ISO: HELIR 25.4-6T12

$193.92
Picture of ISCAR HELIL 25.4-5T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR HELIL 25.4-5T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: HELIL 25.4-5T12

ISO: HELIL 25.4-5T12

$193.92
Picture of ISCAR HELIR 25.4-5T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR HELIR 25.4-5T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: HELIR 25.4-5T12

ISO: HELIR 25.4-5T12

$193.92
Picture of ISCAR HELIL 25.4-4T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR HELIL 25.4-4T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: HELIL 25.4-4T12

ISO: HELIL 25.4-4T12

$193.92
Picture of ISCAR HELIR 25.4-4T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ISCAR HELIR 25.4-4T12 Cut Off,Grooving,Groove Turning Stick Tool 1.000 Tool

ANSI: HELIR 25.4-4T12

ISO: HELIR 25.4-4T12

$193.92
Picture of ARNO ROUSE 72025R-.750* Stick Tool Clamp Down Right Hand

ARNO ROUSE 72025R-.750* Stick Tool Clamp Down Right Hand

ANSI: 72025R-.750*

ISO: 72025R-.750*

$192.60
Picture of ARNO ROUSE 72025L-.750* Stick Tool Clamp Down Left Hand

ARNO ROUSE 72025L-.750* Stick Tool Clamp Down Left Hand

ANSI: 72025L-.750*

ISO: 72025L-.750*

$192.60
Picture of ISCAR FGPA 80-40CB ID5 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FGPA 80-40CB ID5 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FGPA 80-40CB ID5

ISO: FGPA 80-40CB ID5

$191.79
Picture of ISCAR GIDA 80-40CB-D ID5 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIDA 80-40CB-D ID5 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIDA 80-40CB-D ID5

ISO: GIDA 80-40CB-D ID5

$191.79
Picture of ISCAR PICCO ACE 19-7 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO ACE 19-7 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO ACE 19-7

ISO: PICCO ACE 19-7

$191.04
Picture of ISCAR PICCO ACE 19-6 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO ACE 19-6 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO ACE 19-6

ISO: PICCO ACE 19-6

$191.04
Picture of ISCAR PICCO ACE 19-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO ACE 19-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO ACE 19-5

ISO: PICCO ACE 19-5

$191.04
Picture of ISCAR PICCO ACE 19-4 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO ACE 19-4 Grooving,Groove Turning,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO ACE 19-4

ISO: PICCO ACE 19-4

$191.04
Picture of SANDVIK 570-25R123G18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25R123G18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25R123G18B

ISO: 570-25R123G18B

$190.55
Picture of SANDVIK 570-25R123F15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25R123F15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25R123F15B

ISO: 570-25R123F15B

$190.55
Picture of SANDVIK 570-25R123E15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25R123E15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25R123E15B

ISO: 570-25R123E15B

$190.55
Picture of SANDVIK 570-25L123G18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25L123G18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25L123G18B

ISO: 570-25L123G18B

$190.55
Picture of SANDVIK 570-25L123F15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25L123F15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25L123F15B

ISO: 570-25L123F15B

$190.55
Picture of SANDVIK 570-25L123E15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-25L123E15B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-25L123E15B

ISO: 570-25L123E15B

$190.55
Picture of TUNGALOY SNGL16Q09 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.629 Shank

TUNGALOY SNGL16Q09 Screw On Grooving,Groove Turning Boring Bar Steel Round 0.629 Shank

ANSI: SNGL16Q09

ISO: SNGL16Q09

$190.50
Picture of ARNO ROUSE 72020R-.750 Stick Tool Clamp Down Right Hand

ARNO ROUSE 72020R-.750 Stick Tool Clamp Down Right Hand

ANSI: 72020R-.750

ISO: 72020R-.750

$189.90
Picture of ARNO ROUSE 72020L-.750 Stick Tool Clamp Down Left Hand

ARNO ROUSE 72020L-.750 Stick Tool Clamp Down Left Hand

ANSI: 72020L-.750

ISO: 72020L-.750

$189.90
Picture of TUNGALOY JS22K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.866 Shank

TUNGALOY JS22K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.866 Shank

ANSI: JS22K-TGL3

ISO: JS22K-TGL3

$189.70
Picture of TUNGALOY JS20K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.787 Shank

TUNGALOY JS20K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.787 Shank

ANSI: JS20K-TGL3

ISO: JS20K-TGL3

$189.70
Picture of TUNGALOY JS19K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.750 Shank

TUNGALOY JS19K-TGL3 On Edge Grooving,Groove Turning Boring Bar Steel Round 0.750 Shank

ANSI: JS19K-TGL3

ISO: JS19K-TGL3

$189.70
Picture of TUNGALOY CTER2525-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-4T25

ISO: CTER2525-4T25

$189.55
Picture of TUNGALOY CTEL2525-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-2T17

ISO: CTEL2525-2T17

$189.55
Picture of TUNGALOY CTER2525-5T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-5T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-5T32

ISO: CTER2525-5T32

$189.55
Picture of TUNGALOY CTER2525-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-2T12

ISO: CTER2525-2T12

$189.55
Picture of TUNGALOY CTEL2525-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-5T12

ISO: CTEL2525-5T12

$189.55
Picture of TUNGALOY CTER2525-6T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-6T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-6T32

ISO: CTER2525-6T32

$189.55
Picture of TUNGALOY CTER2525-3T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-3T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-3T25

ISO: CTER2525-3T25

$189.55
Picture of TUNGALOY CTER2525-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-3T09

ISO: CTER2525-3T09

$189.55
Picture of TUNGALOY CTEL2525-6T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-6T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-6T32

ISO: CTEL2525-6T32

$189.55
Picture of TUNGALOY CTEL2525-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-2T08

ISO: CTEL2525-2T08

$189.55
Picture of TUNGALOY CTEL2525-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-6T12

ISO: CTEL2525-6T12

$189.55
Picture of TUNGALOY CTEL2525-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-4T10

ISO: CTEL2525-4T10

$189.55
Picture of TUNGALOY CTER2525-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-6T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-6T12

ISO: CTER2525-6T12

$189.55
Picture of TUNGALOY CTER2525-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-5T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-5T12

ISO: CTER2525-5T12

$189.55
Picture of TUNGALOY CTER2525-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-3T20

ISO: CTER2525-3T20

$189.55
Picture of TUNGALOY CTEL2525-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-2T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-2T12

ISO: CTEL2525-2T12

$189.55
Picture of TUNGALOY CTER2525-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-2T17 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-2T17

ISO: CTER2525-2T17

$189.55
Picture of TUNGALOY CTER2525-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-2T08 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-2T08

ISO: CTER2525-2T08

$189.55
Picture of TUNGALOY CTEL2525-5T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-5T32 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-5T32

ISO: CTEL2525-5T32

$189.55
Picture of TUNGALOY CTEL2525-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-4T25 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-4T25

ISO: CTEL2525-4T25

$189.55
Picture of TUNGALOY CTER2525-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-4T10

ISO: CTER2525-4T10

$189.55
Picture of TUNGALOY CTEL2525-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-3T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-3T20

ISO: CTEL2525-3T20

$189.55
Picture of TUNGALOY CTEL2525-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-3T09 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-3T09

ISO: CTEL2525-3T09

$189.55
Picture of TUNGALOY CTEL2525-3T25 Clamp Down Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-3T25 Clamp Down Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-3T25

ISO: CTEL2525-3T25

$189.55
Picture of TUNGALOY CTEL16-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEL16-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEL16-6T20

ISO: CTEL16-6T20

$189.55
Picture of TUNGALOY CTEL16-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEL16-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEL16-5T20

ISO: CTEL16-5T20

$189.55
Picture of TUNGALOY CTEL16-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEL16-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEL16-4T15

ISO: CTEL16-4T15

$189.55
Picture of TUNGALOY CTEL16-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEL16-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEL16-3T12

ISO: CTEL16-3T12

$189.55
Picture of TUNGALOY CTER16-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTER16-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTER16-6T20

ISO: CTER16-6T20

$189.55
Picture of TUNGALOY CTER16-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTER16-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTER16-5T20

ISO: CTER16-5T20

$189.55
Picture of TUNGALOY CTER16-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTER16-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTER16-4T15

ISO: CTER16-4T15

$189.55
Picture of TUNGALOY CTER16-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTER16-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTER16-3T12

ISO: CTER16-3T12

$189.55
Picture of TUNGALOY CTEFL16-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEFL16-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEFL16-6T04

ISO: CTEFL16-6T04

$189.55
Picture of TUNGALOY CTEFL16-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEFL16-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEFL16-4T04

ISO: CTEFL16-4T04

$189.55
Picture of TUNGALOY CTEFR16-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEFR16-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEFR16-6T04

ISO: CTEFR16-6T04

$189.55
Picture of TUNGALOY CTEFR16-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

TUNGALOY CTEFR16-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 1.000 Shank

ANSI: CTEFR16-4T04

ISO: CTEFR16-4T04

$189.55
Picture of TUNGALOY CTEL2525-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-6T20

ISO: CTEL2525-6T20

$189.55
Picture of TUNGALOY CTEL2525-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-5T20

ISO: CTEL2525-5T20

$189.55
Picture of TUNGALOY CTEL2525-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-4T15

ISO: CTEL2525-4T15

$189.55
Picture of TUNGALOY CTEL2525-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEL2525-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEL2525-3T12

ISO: CTEL2525-3T12

$189.55
Picture of TUNGALOY CTER2525-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-6T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-6T20

ISO: CTER2525-6T20

$189.55
Picture of TUNGALOY CTER2525-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-5T20 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-5T20

ISO: CTER2525-5T20

$189.55
Picture of TUNGALOY CTER2525-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-4T15 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-4T15

ISO: CTER2525-4T15

$189.55
Picture of TUNGALOY CTER2525-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTER2525-3T12 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTER2525-3T12

ISO: CTER2525-3T12

$189.55
Picture of TUNGALOY CTEFL2525-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEFL2525-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEFL2525-6T04

ISO: CTEFL2525-6T04

$189.55
Picture of TUNGALOY CTEFL2525-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEFL2525-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEFL2525-4T04

ISO: CTEFL2525-4T04

$189.55
Picture of TUNGALOY CTEFR2525-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

TUNGALOY CTEFR2525-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.984 Shank

ANSI: CTEFR2525-4T04

ISO: CTEFR2525-4T04

$189.55
Picture of SANDVIK RF123G040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G040-10B

ISO: RF123G040-10B

$189.52
Picture of SANDVIK LF123G040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G040-10B

ISO: LF123G040-10B

$189.52
Picture of SANDVIK LG123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LG123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LG123G028-10C

ISO: LG123G028-10C

$189.52
Picture of SANDVIK RG123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RG123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RG123G028-10C

ISO: RG123G028-10C

$189.52
Picture of SANDVIK LF123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G028-10C

ISO: LF123G028-10C

$189.52
Picture of SANDVIK RF123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G028-10C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G028-10C

ISO: RF123G028-10C

$189.52
Picture of SANDVIK RG123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RG123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RG123G07-1616C

ISO: RG123G07-1616C

$189.52
Picture of SANDVIK LF123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G07-1616C

ISO: LF123G07-1616C

$189.52
Picture of SANDVIK RF123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G07-1616C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G07-1616C

ISO: RF123G07-1616C

$189.52
Picture of SANDVIK R151.20-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-10-25

ISO: R151.20-10-25

$189.52
Picture of SANDVIK R151.20-10-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-10-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-10-20

ISO: R151.20-10-20

$189.52
Picture of SANDVIK R151.20-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-08-25

ISO: R151.20-08-25

$189.52
Picture of SANDVIK R151.20-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-08-20

ISO: R151.20-08-20

$189.52
Picture of SANDVIK R151.20-1612-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1612-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1612-30

ISO: R151.20-1612-30

$189.52
Picture of SANDVIK R151.20-1612-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1612-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1612-20

ISO: R151.20-1612-20

$189.52
Picture of SANDVIK R151.20-1212-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1212-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1212-25

ISO: R151.20-1212-25

$189.52
Picture of SANDVIK R151.20-1212-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1212-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1212-20

ISO: R151.20-1212-20

$189.52
Picture of SANDVIK R151.20-1010-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1010-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1010-20

ISO: R151.20-1010-20

$189.52
Picture of SANDVIK R151.20-10-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-10-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-10-30

ISO: R151.20-10-30

$189.52
Picture of SANDVIK R151.20-1616-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1616-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1616-30

ISO: R151.20-1616-30

$189.52
Picture of SANDVIK R151.20-1616-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1616-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1616-25

ISO: R151.20-1616-25

$189.52
Picture of SANDVIK R151.20-1616-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK R151.20-1616-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: R151.20-1616-20

ISO: R151.20-1616-20

$189.52
Picture of SANDVIK RF151.23-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-08-25

ISO: RF151.23-08-25

$189.52
Picture of SANDVIK RF151.23-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-08-20

ISO: RF151.23-08-20

$189.52
Picture of SANDVIK RF123G20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G20-1616B

ISO: RF123G20-1616B

$189.52
Picture of SANDVIK RF123G12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G12-1212B

ISO: RF123G12-1212B

$189.52
Picture of SANDVIK RF123G10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123G10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123G10-1616B

ISO: RF123G10-1616B

$189.52
Picture of SANDVIK RF123D032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123D032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123D032-08B

ISO: RF123D032-08B

$189.52
Picture of SANDVIK RF151.23-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-10-25

ISO: RF151.23-10-25

$189.52
Picture of SANDVIK RF123E12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E12-1212B

ISO: RF123E12-1212B

$189.52
Picture of SANDVIK RF151.23-1616-30M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-1616-30M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-1616-30M1

ISO: RF151.23-1616-30M1

$189.52
Picture of SANDVIK RF151.23-1616-25M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-1616-25M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-1616-25M1

ISO: RF151.23-1616-25M1

$189.52
Picture of SANDVIK RF151.23-1616-20M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF151.23-1616-20M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF151.23-1616-20M1

ISO: RF151.23-1616-20M1

$189.52
Picture of SANDVIK RF123E08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E08-1616B

ISO: RF123E08-1616B

$189.52
Picture of SANDVIK RF123E08-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E08-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E08-1212B

ISO: RF123E08-1212B

$189.52
Picture of SANDVIK RF123F079-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123F079-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123F079-10B

ISO: RF123F079-10B

$189.52
Picture of SANDVIK RF123F040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123F040-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123F040-10B

ISO: RF123F040-10B

$189.52
Picture of SANDVIK RF123F20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123F20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123F20-1616B

ISO: RF123F20-1616B

$189.52
Picture of SANDVIK RF123E15-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E15-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E15-1616B

ISO: RF123E15-1616B

$189.52
Picture of SANDVIK RF123F10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123F10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123F10-1616B

ISO: RF123F10-1616B

$189.52
Picture of SANDVIK RF123F10-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123F10-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123F10-1212B

ISO: RF123F10-1212B

$189.52
Picture of SANDVIK RF123E059-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E059-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E059-10B

ISO: RF123E059-10B

$189.52
Picture of SANDVIK RF123E059-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E059-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E059-08B

ISO: RF123E059-08B

$189.52
Picture of SANDVIK RF123E032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E032-10B

ISO: RF123E032-10B

$189.52
Picture of SANDVIK RF123E032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123E032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123E032-08B

ISO: RF123E032-08B

$189.52
Picture of SANDVIK LF151.23-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF151.23-08-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF151.23-08-25

ISO: LF151.23-08-25

$189.52
Picture of SANDVIK L151.20-1212-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1212-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1212-20

ISO: L151.20-1212-20

$189.52
Picture of SANDVIK L151.20-1010-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1010-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1010-20

ISO: L151.20-1010-20

$189.52
Picture of SANDVIK L151.20-10-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-10-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-10-30

ISO: L151.20-10-30

$189.52
Picture of SANDVIK L151.20-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-10-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-10-25

ISO: L151.20-10-25

$189.52
Picture of SANDVIK L151.20-1616-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1616-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1616-30

ISO: L151.20-1616-30

$189.52
Picture of SANDVIK L151.20-1616-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1616-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1616-25

ISO: L151.20-1616-25

$189.52
Picture of SANDVIK L151.20-1616-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1616-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1616-20

ISO: L151.20-1616-20

$189.52
Picture of SANDVIK L151.20-1612-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1612-30 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1612-30

ISO: L151.20-1612-30

$189.52
Picture of SANDVIK L151.20-1612-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1612-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1612-20

ISO: L151.20-1612-20

$189.52
Picture of SANDVIK L151.20-1212-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-1212-25 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-1212-25

ISO: L151.20-1212-25

$189.52
Picture of SANDVIK L151.20-10-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-10-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-10-20

ISO: L151.20-10-20

$189.52
Picture of SANDVIK L151.20-0808-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-0808-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-0808-20

ISO: L151.20-0808-20

$189.52
Picture of SANDVIK L151.20-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK L151.20-08-20 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: L151.20-08-20

ISO: L151.20-08-20

$189.52
Picture of SANDVIK LF151.23-1616-25M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF151.23-1616-25M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF151.23-1616-25M1

ISO: LF151.23-1616-25M1

$189.52
Picture of SANDVIK LF151.23-1616-20M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF151.23-1616-20M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF151.23-1616-20M1

ISO: LF151.23-1616-20M1

$189.52
Picture of SANDVIK LF151.23-1616-30M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF151.23-1616-30M1 Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF151.23-1616-30M1

ISO: LF151.23-1616-30M1

$189.52
Picture of SANDVIK LF123G20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G20-1616B

ISO: LF123G20-1616B

$189.52
Picture of SANDVIK LF123G12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G12-1212B

ISO: LF123G12-1212B

$189.52
Picture of SANDVIK LF123G10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123G10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123G10-1616B

ISO: LF123G10-1616B

$189.52
Picture of SANDVIK LF123E059-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E059-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E059-08B

ISO: LF123E059-08B

$189.52
Picture of SANDVIK LF123E032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E032-10B

ISO: LF123E032-10B

$189.52
Picture of SANDVIK LF123E032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E032-08B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E032-08B

ISO: LF123E032-08B

$189.52
Picture of SANDVIK LF123E08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E08-1616B

ISO: LF123E08-1616B

$189.52
Picture of SANDVIK LF123E08-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E08-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E08-1212B

ISO: LF123E08-1212B

$189.52
Picture of SANDVIK LF123E15-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E15-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E15-1616B

ISO: LF123E15-1616B

$189.52
Picture of SANDVIK LF123E12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E12-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E12-1212B

ISO: LF123E12-1212B

$189.52
Picture of SANDVIK LF123E059-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123E059-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123E059-10B

ISO: LF123E059-10B

$189.52
Picture of SANDVIK LF123F10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123F10-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123F10-1616B

ISO: LF123F10-1616B

$189.52
Picture of SANDVIK LF123F10-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123F10-1212B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123F10-1212B

ISO: LF123F10-1212B

$189.52
Picture of SANDVIK LF123F20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123F20-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123F20-1616B

ISO: LF123F20-1616B

$189.52
Picture of SANDVIK LF123F079-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123F079-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123F079-10B

ISO: LF123F079-10B

$189.52
Picture of ISCAR MG PCO-16-9 Grooving,Turn Grooving,Groove Threading Boring Bar 0.629 Tool

ISCAR MG PCO-16-9 Grooving,Turn Grooving,Groove Threading Boring Bar 0.629 Tool

ANSI: MG PCO-16-9

ISO: MG PCO-16-9

$189.12
Picture of ISCAR MG 12.7-11C25 Grooving,Groove Turning Boring Bar 0.500 Tool

ISCAR MG 12.7-11C25 Grooving,Groove Turning Boring Bar 0.500 Tool

ANSI: MG 12.7-11C25

ISO: MG 12.7-11C25

$189.12
Picture of ISCAR MG 12.7-08C23 Grooving,Groove Turning Boring Bar 0.500 Tool

ISCAR MG 12.7-08C23 Grooving,Groove Turning Boring Bar 0.500 Tool

ANSI: MG 12.7-08C23

ISO: MG 12.7-08C23

$189.12
Picture of ISCAR MG 12.7-08C16 Grooving,Groove Turning Boring Bar 0.500 Tool

ISCAR MG 12.7-08C16 Grooving,Groove Turning Boring Bar 0.500 Tool

ANSI: MG 12.7-08C16

ISO: MG 12.7-08C16

$189.12
Picture of INGERSOLL TTSIL9.5-12.5-2 Grooving,Groove Turning Boring Bar Boring Bar 0.375 Steel

INGERSOLL TTSIL9.5-12.5-2 Grooving,Groove Turning Boring Bar Boring Bar 0.375 Steel

ANSI: TTSIL9.5-12.5-2

ISO: TTSIL9.5-12.5-2

$188.93
Picture of INGERSOLL TTSIR9.5-12.5-2 Grooving,Groove Turning Boring Bar Boring Bar 0.375 Steel

INGERSOLL TTSIR9.5-12.5-2 Grooving,Groove Turning Boring Bar Boring Bar 0.375 Steel

ANSI: TTSIR9.5-12.5-2

ISO: TTSIR9.5-12.5-2

$188.93
Picture of ISCAR PICCO 19-6-7 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO 19-6-7 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO 19-6-7

ISO: PICCO 19-6-7

$188.16
Picture of ISCAR PICCO 19-4-5 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ISCAR PICCO 19-4-5 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ANSI: PICCO 19-4-5

ISO: PICCO 19-4-5

$188.16
Picture of INGERSOLL SFGB32-3-TB Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

INGERSOLL SFGB32-3-TB Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

ANSI: SFGB32-3-TB

ISO: SFGB32-3-TB

$188.07
Picture of INGERSOLL SFGB32-2-TB Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

INGERSOLL SFGB32-2-TB Cut Off,Face Grooving,Grooving,Groove Turning,Groove Threading Stick Tool Blade 1.260 Steel

ANSI: SFGB32-2-TB

ISO: SFGB32-2-TB

$188.07
Picture of KOROLOY MGEHR 16-4 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

KOROLOY MGEHR 16-4 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

ANSI: MGEHR 16-4

ISO: MGEHR 16-4

$187.71
Picture of TUNGALOY CAEL-2T20-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-2T20-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-2T20-CHP

ISO: CAEL-2T20-CHP

$187.20
Picture of TUNGALOY CAEL-2T16-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAEL-2T16-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAEL-2T16-CHP

ISO: CAEL-2T16-CHP

$187.20
Picture of TUNGALOY CAER-2T20-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-2T20-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-2T20-CHP

ISO: CAER-2T20-CHP

$187.20
Picture of TUNGALOY CAER-2T16-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

TUNGALOY CAER-2T16-CHP Clamp Down Cut Off,Grooving,Groove Turning Adapter Blade Steel

ANSI: CAER-2T16-CHP

ISO: CAER-2T16-CHP

$187.20
Picture of INGERSOLL TTIL16-2C Grooving,Groove Turning Boring Bar Boring Bar 0.629 Steel

INGERSOLL TTIL16-2C Grooving,Groove Turning Boring Bar Boring Bar 0.629 Steel

ANSI: TTIL16-2C

ISO: TTIL16-2C

$187.20
Picture of INGERSOLL TTIR16-2C Grooving,Groove Turning Boring Bar Boring Bar 0.629 Steel

INGERSOLL TTIR16-2C Grooving,Groove Turning Boring Bar Boring Bar 0.629 Steel

ANSI: TTIR16-2C

ISO: TTIR16-2C

$187.20
Picture of ARNO ROUSE 308-75100R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-75100R Stick Tool Clamp Down Right Hand

ANSI: 308-75100R

ISO: 308-75100R

$187.10
Picture of ARNO ROUSE 308-75100L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-75100L Stick Tool Clamp Down Left Hand

ANSI: 308-75100L

ISO: 308-75100L

$187.10
Picture of ARNO ROUSE 308-300500R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-300500R Stick Tool Clamp Down Right Hand

ANSI: 308-300500R

ISO: 308-300500R

$187.10
Picture of ARNO ROUSE 308-300500L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-300500L Stick Tool Clamp Down Left Hand

ANSI: 308-300500L

ISO: 308-300500L

$187.10
Picture of ARNO ROUSE 308-150300R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-150300R Stick Tool Clamp Down Right Hand

ANSI: 308-150300R

ISO: 308-150300R

$187.10
Picture of ARNO ROUSE 308-150300L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-150300L Stick Tool Clamp Down Left Hand

ANSI: 308-150300L

ISO: 308-150300L

$187.10
Picture of ARNO ROUSE 308-100150R Stick Tool Clamp Down Right Hand

ARNO ROUSE 308-100150R Stick Tool Clamp Down Right Hand

ANSI: 308-100150R

ISO: 308-100150R

$187.10
Picture of ARNO ROUSE 308-100150L Stick Tool Clamp Down Left Hand

ARNO ROUSE 308-100150L Stick Tool Clamp Down Left Hand

ANSI: 308-100150L

ISO: 308-100150L

$187.10
Picture of ISCAR FGPA 6.00-3.00YZ-D ID5 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR FGPA 6.00-3.00YZ-D ID5 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: FGPA 6.00-3.00YZ-D ID5

ISO: FGPA 6.00-3.00YZ-D ID5

$186.37
Picture of ISCAR GIPA 6.00-3.00YZ-D ID5 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIPA 6.00-3.00YZ-D ID5 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIPA 6.00-3.00YZ-D ID5

ISO: GIPA 6.00-3.00YZ-D ID5

$186.37
Picture of ISCAR GIPA 8YZ-35V-1.20-D ID5 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ISCAR GIPA 8YZ-35V-1.20-D ID5 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ANSI: GIPA 8YZ-35V-1.20-D ID5

ISO: GIPA 8YZ-35V-1.20-D ID5

$186.37
Picture of ISCAR FSPA 6.00-3.00YZ-D ID5 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR FSPA 6.00-3.00YZ-D ID5 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: FSPA 6.00-3.00YZ-D ID5

ISO: FSPA 6.00-3.00YZ-D ID5

$186.37
Picture of ARNO ROUSE UT1040R Stick Tool Clamp Down Right Hand

ARNO ROUSE UT1040R Stick Tool Clamp Down Right Hand

ANSI: UT1040R

ISO: UT1040R

$186.00
Picture of ARNO ROUSE UT1040L Stick Tool Clamp Down Left Hand

ARNO ROUSE UT1040L Stick Tool Clamp Down Left Hand

ANSI: UT1040L

ISO: UT1040L

$186.00
Picture of ARNO ROUSE 71616R-.625 Stick Tool Clamp Down Right Hand

ARNO ROUSE 71616R-.625 Stick Tool Clamp Down Right Hand

ANSI: 71616R-.625

ISO: 71616R-.625

$185.90
Picture of ARNO ROUSE 71616L-.625 Stick Tool Clamp Down Left Hand

ARNO ROUSE 71616L-.625 Stick Tool Clamp Down Left Hand

ANSI: 71616L-.625

ISO: 71616L-.625

$185.90
Picture of SANDVIK RF123T06-2525BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123T06-2525BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123T06-2525BM

ISO: RF123T06-2525BM

$185.40
Picture of SANDVIK RF123T023-16BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123T023-16BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123T023-16BM

ISO: RF123T023-16BM

$185.40
Picture of SANDVIK LF123U06-2525BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123U06-2525BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123U06-2525BM

ISO: LF123U06-2525BM

$185.40
Picture of SANDVIK LF123U023-16BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123U023-16BM Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123U023-16BM

ISO: LF123U023-16BM

$185.40
Picture of ISCAR MG PCO-19-6-8 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ISCAR MG PCO-19-6-8 Grooving,Turn Grooving,Groove Threading Boring Bar 0.750 Tool

ANSI: MG PCO-19-6-8

ISO: MG PCO-19-6-8

$185.28
Picture of SANDVIK 570-32R151.21-32-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.21-32-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.21-32-50

ISO: 570-32R151.21-32-50

$184.37
Picture of SANDVIK 570-32R151.21-32-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.21-32-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.21-32-40

ISO: 570-32R151.21-32-40

$184.37
Picture of SANDVIK 570-32R151.21-20-25 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.21-20-25 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.21-20-25

ISO: 570-32R151.21-20-25

$184.37
Picture of SANDVIK 570-32L151.21-30-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32L151.21-30-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32L151.21-30-30

ISO: 570-32L151.21-30-30

$184.37
Picture of SANDVIK 570-32L151.21-20-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32L151.21-20-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32L151.21-20-20

ISO: 570-32L151.21-20-20

$184.37
Picture of SANDVIK 570-32L151.21-32-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32L151.21-32-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32L151.21-32-50

ISO: 570-32L151.21-32-50

$184.37
Picture of ISCAR HGAD 3LE-D42-JHP Cut Off,Grooving,Groove Turning Adapter Blade

ISCAR HGAD 3LE-D42-JHP Cut Off,Grooving,Groove Turning Adapter Blade

ANSI: HGAD 3LE-D42-JHP

ISO: HGAD 3LE-D42-JHP

$184.32
Picture of ISCAR HGAD 3RE-D42-JHP Cut Off,Grooving,Groove Turning Adapter Blade

ISCAR HGAD 3RE-D42-JHP Cut Off,Grooving,Groove Turning Adapter Blade

ANSI: HGAD 3RE-D42-JHP

ISO: HGAD 3RE-D42-JHP

$184.32
Picture of ISCAR PICCO ACE 15.9-7 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ISCAR PICCO ACE 15.9-7 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ANSI: PICCO ACE 15.9-7

ISO: PICCO ACE 15.9-7

$184.32
Picture of ISCAR PICCO ACE 15.9-6 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ISCAR PICCO ACE 15.9-6 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ANSI: PICCO ACE 15.9-6

ISO: PICCO ACE 15.9-6

$184.32
Picture of ISCAR PICCO ACE 15.9-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ISCAR PICCO ACE 15.9-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ANSI: PICCO ACE 15.9-5

ISO: PICCO ACE 15.9-5

$184.32
Picture of ISCAR PICCO ACE 15.9-4 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ISCAR PICCO ACE 15.9-4 Grooving,Groove Turning,Groove Threading Boring Bar 0.625 Tool

ANSI: PICCO ACE 15.9-4

ISO: PICCO ACE 15.9-4

$184.32
Picture of ISCAR PICCO ACE 12.7-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.500 Tool

ISCAR PICCO ACE 12.7-5 Grooving,Groove Turning,Groove Threading Boring Bar 0.500 Tool

ANSI: PICCO ACE 12.7-5

ISO: PICCO ACE 12.7-5

$184.32