Indexable Drill

Sort by
Picture of INGERSOLL TD1800144T5R00 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

INGERSOLL TD1800144T5R00 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

ISO: TD1800144T5R00

$474.13
Picture of INGERSOLL TD1700136T4R00 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

INGERSOLL TD1700136T4R00 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

ISO: TD1700136T4R00

$474.13
Picture of ISCAR DCNT0768-165-100A-7/8UNC 0.748 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISCAR DCNT0768-165-100A-7/8UNC 0.748 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISO: DCNT0768-165-100A-7/8UNC

$472.32
Picture of ISCAR DCN 0866-260-100A-3D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0866-260-100A-3D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0866-260-100A-3D

$471.36
Picture of ISCAR DCN 0827-248-100A-3D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0827-248-100A-3D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0827-248-100A-3D

$471.36
Picture of ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$470.93
Picture of ISCAR DCN 0945-283-125R-3D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0945-283-125R-3D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0945-283-125R-3D

$470.40
Picture of ISCAR DCN 0906-272-125R-3D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0906-272-125R-3D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0906-272-125R-3D

$470.40
Picture of INGERSOLL Q0135041N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0135041N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0135041N5R01

$469.47
Picture of INGERSOLL Q0127038N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0127038N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0127038N5R01

$469.47
Picture of INGERSOLL YD160012818R01 0.6299 (16.0 mm) QwikTwist Body

INGERSOLL YD160012818R01 0.6299 (16.0 mm) QwikTwist Body

ISO: YD160012818R01

$468.87
Picture of INGERSOLL YD150012018R01 0.5906 (15.0 mm) QwikTwist Body

INGERSOLL YD150012018R01 0.5906 (15.0 mm) QwikTwist Body

ISO: YD150012018R01

$468.87
Picture of ISCAR DCNS 0866-433-086B-5D 0.866" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0866-433-086B-5D 0.866" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0866-433-086B-5D

$467.52
Picture of ISCAR DCNS 0827-413-082B-5D 0.827" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0827-413-082B-5D 0.827" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0827-413-082B-5D

$467.52
Picture of ISCAR DCM 0827-662-100A-8D 0.827 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0827-662-100A-8D 0.827 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0827-662-100A-8D

$467.52
Picture of ISCAR DCN 1024-154-125R-1.5D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 1024-154-125R-1.5D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 1024-154-125R-1.5D

$464.64
Picture of ISCAR DCN 0984-150-125R-1.5D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 0984-150-125R-1.5D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 0984-150-125R-1.5D

$464.64
Picture of ISCAR DCN 0787-394-100A-5D 0.787" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0787-394-100A-5D 0.787" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0787-394-100A-5D

$464.64
Picture of ISCAR DCN 0748-374-100A-5D 0.748" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0748-374-100A-5D 0.748" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0748-374-100A-5D

$464.64
Picture of INGERSOLL TD1600192S7R01 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

INGERSOLL TD1600192S7R01 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

ISO: TD1600192S7R01

$463.87
Picture of INGERSOLL TD1600192T4R00 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

INGERSOLL TD1600192T4R00 0.6299 (16.000 mm)-0.6654 (16.900 mm) GoldTwist Body

ISO: TD1600192T4R00

$463.87
Picture of INGERSOLL LD2200066N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200066N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200066N5R01

$462.93
Picture of INGERSOLL LD2100063N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100063N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100063N5R01

$462.93
Picture of INGERSOLL LD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200066JFR00

$462.93
Picture of INGERSOLL LD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100063JFR00

$462.93
Picture of INGERSOLL YD2200066C8R01 0.8661 (22.0 mm) QwikTwist Body

INGERSOLL YD2200066C8R01 0.8661 (22.0 mm) QwikTwist Body

ISO: YD2200066C8R01

$462.80
Picture of WIDIA/KENNAMETAL TDM0866R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0866R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

$462.28
Picture of WIDIA/KENNAMETAL TDM0827R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0827R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

$462.28
Picture of WIDIA/KENNAMETAL TDM220R3SCF25M TDM1 SCF Drill BODY 3XD D=22.0

WIDIA/KENNAMETAL TDM220R3SCF25M TDM1 SCF Drill BODY 3XD D=22.0

$462.28
Picture of WIDIA/KENNAMETAL TDM210R3SCF25M TDM1 SCF Drill BODY 3XD D=21.0

WIDIA/KENNAMETAL TDM210R3SCF25M TDM1 SCF Drill BODY 3XD D=21.0

$462.28
Picture of INGERSOLL QR0135041N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135041N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135041N5R02

$460.13
Picture of INGERSOLL QR0127038N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0127038N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0127038N5R02

$460.13
Picture of INGERSOLL QR0135041JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135041JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135041JER00

$460.13
Picture of INGERSOLL QR0130039JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0130039JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0130039JER00

$460.13
Picture of INGERSOLL QR0150045JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150045JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150045JER00

$460.13
Picture of INGERSOLL QR0125038JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0125038JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0125038JER00

$460.13
Picture of INGERSOLL QR0120036JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0120036JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0120036JER00

$460.13
Picture of INGERSOLL QR0150045N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150045N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150045N5R02

$460.13
Picture of INGERSOLL QR0143043N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0143043N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0143043N5R02

$460.13
Picture of INGERSOLL TD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200066JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200066JFR00

$460.13
Picture of INGERSOLL TD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100063JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100063JFR00

$460.13
Picture of INGERSOLL TD2200066C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200066C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200066C8R01

$460.13
Picture of INGERSOLL TD2100063C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100063C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100063C8R01

$460.13
Picture of INGERSOLL QR0155048JER00 0.610 (15.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0155048JER00 0.610 (15.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0155048JER00

$460.13
Picture of INGERSOLL QR0145045JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0145045JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0145045JER00

$460.13
Picture of INGERSOLL QR0140042JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0140042JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0140042JER00

$460.13
Picture of INGERSOLL QR0198040N5R02 0.780 (19.81 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0198040N5R02 0.780 (19.81 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0198040N5R02

$459.20
Picture of INGERSOLL QR0191038N5R02 0.750 (19.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0191038N5R02 0.750 (19.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0191038N5R02

$459.20
Picture of INGERSOLL QR0183037N5R02 0.719 (18.26 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0183037N5R02 0.719 (18.26 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0183037N5R02

$459.20
Picture of INGERSOLL QR0175035N5R02 0.689 (17.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175035N5R02 0.689 (17.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175035N5R02

$459.20
Picture of INGERSOLL QR0167033N5R02 0.658 (16.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0167033N5R02 0.658 (16.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0167033N5R02

$459.20
Picture of INGERSOLL QR0159032N5R02 0.626 (15.90 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0159032N5R02 0.626 (15.90 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0159032N5R02

$459.20
Picture of INGERSOLL TD2400072S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400072S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400072S9R01

$459.20
Picture of INGERSOLL TD2300069S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300069S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300069S9R01

$459.20
Picture of INGERSOLL QR0205042JFR00 0.807 (20.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0205042JFR00 0.807 (20.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0205042JFR00

$459.20
Picture of INGERSOLL QR0195040JFR00 0.768 (19.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0195040JFR00 0.768 (19.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0195040JFR00

$459.20
Picture of INGERSOLL QR0175036JFR00 0.689 (17.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175036JFR00 0.689 (17.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175036JFR00

$459.20
Picture of INGERSOLL QR0200040JFR00 0.787 (20.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0200040JFR00 0.787 (20.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0200040JFR00

$459.20
Picture of INGERSOLL QR0190038JFR00 0.748 (19.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0190038JFR00 0.748 (19.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0190038JFR00

$459.20
Picture of INGERSOLL QR0180036JFR00 0.709 (18.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0180036JFR00 0.709 (18.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0180036JFR00

$459.20
Picture of INGERSOLL QR0170034JFR00 0.669 (17.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0170034JFR00 0.669 (17.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0170034JFR00

$459.20
Picture of INGERSOLL QR0160032JER00 0.630 (16.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0160032JER00 0.630 (16.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0160032JER00

$459.20
Picture of INGERSOLL QR0185038JFR00 0.728 (18.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0185038JFR00 0.728 (18.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0185038JFR00

$459.20
Picture of ISCAR DCN 0906-138-125A-1.5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 0906-138-125A-1.5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 0906-138-125A-1.5D

$458.88
Picture of ISCAR DCN 0945-142-125A-1.5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 0945-142-125A-1.5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 0945-142-125A-1.5D

$458.88
Picture of TUNGALOY TIDU0630F0750-8 0.63" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0630F0750-8 0.63" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0630F0750-8

$457.65
Picture of TUNGALOY TIDU0591F0750-8 0.591" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0591F0750-8 0.591" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0591F0750-8

$457.65
Picture of TUNGALOY TID160F20-8 16mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID160F20-8 16mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID160F20-8

$457.65
Picture of TUNGALOY TIDU0669F0750-5 0.669" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0669F0750-5 0.669" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0669F0750-5

$457.65
Picture of TUNGALOY TID180F25-5 18mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID180F25-5 18mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID180F25-5

$457.65
Picture of TUNGALOY TID170F20-5 17mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID170F20-5 17mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID170F20-5

$457.65
Picture of INGERSOLL LD2000100N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000100N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000100N5R01

$456.40
Picture of INGERSOLL LD2000100JFR01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000100JFR01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000100JFR01

$456.40
Picture of WIDIA/KENNAMETAL TDM0669R8SCF075 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0669R8SCF075 TDM1 Drill BODY INCH SCF 8XD D

$456.15
Picture of WIDIA/KENNAMETAL TDM180R8SCF25M TDM1 SCF Drill BODY 8XD D=18.0

WIDIA/KENNAMETAL TDM180R8SCF25M TDM1 SCF Drill BODY 8XD D=18.0

$456.15
Picture of WIDIA/KENNAMETAL TDM170R8SCF20M TDM1 SCF Drill BODY 8XD D=17.0

WIDIA/KENNAMETAL TDM170R8SCF20M TDM1 SCF Drill BODY 8XD D=17.0

$456.15
Picture of ISCAR DR0531-1062-063-04-2D-N 0.531" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0531-1062-063-04-2D-N 0.531" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0531-1062-063-04-2D-N

$456.00
Picture of ISCAR DR0500-1000-063-04-2D-N 1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0500-1000-063-04-2D-N 1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0500-1000-063-04-2D-N

$456.00
Picture of ISCAR DR0469-0938-063-04-2D-N 0.469" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0469-0938-063-04-2D-N 0.469" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0469-0938-063-04-2D-N

$456.00
Picture of ISCAR DR0594-1188-075-05-2D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0594-1188-075-05-2D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0594-1188-075-05-2D-N

$456.00
Picture of ISCAR DR0578-1156-075-05-2D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0578-1156-075-05-2D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0578-1156-075-05-2D-N

$456.00
Picture of ISCAR DR0562-1125-075-05-2D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0562-1125-075-05-2D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0562-1125-075-05-2D-N

$456.00
Picture of ISCAR DCM 0945-472-100A-5D 0.98" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0945-472-100A-5D 0.98" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0945-472-100A-5D

$456.00
Picture of ISCAR DCM 0906-453-100A-5D 0.906" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0906-453-100A-5D 0.906" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0906-453-100A-5D

$456.00
Picture of WIDIA/KENNAMETAL TDM0787R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0787R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

$455.29
Picture of WIDIA/KENNAMETAL TDM0748R5SCF075 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0748R5SCF075 TDM1 Drill BODY INCH SCF 5XD D

$455.29
Picture of WIDIA/KENNAMETAL TDM200R5SCF25M TDM1 SCF Drill BODY 5XD D=20.0

WIDIA/KENNAMETAL TDM200R5SCF25M TDM1 SCF Drill BODY 5XD D=20.0

$455.29
Picture of WIDIA/KENNAMETAL TDM190R5SCF25M TDM1 SCF Drill BODY 5XD D=19.0

WIDIA/KENNAMETAL TDM190R5SCF25M TDM1 SCF Drill BODY 5XD D=19.0

$455.29
Picture of ISCAR DCN 0591-709-075R-12D 0.591" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0591-709-075R-12D 0.591" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0591-709-075R-12D

$455.04
Picture of ISCAR DCN 0709-567-100R-8D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0709-567-100R-8D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0709-567-100R-8D

$455.04
Picture of ISCAR DCN 0669-535-075R-8D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0669-535-075R-8D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0669-535-075R-8D

$455.04
Picture of ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$454.95
Picture of TUNGALOY TDXU-0562FS-02 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0562FS-02 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0562FS-02

$453.65
Picture of TUNGALOY TDXU-0531FS-02 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0531FS-02 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0531FS-02

$453.65
Picture of TUNGALOY TDXU-0500FS-02 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0500FS-02 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0500FS-02

$453.65
Picture of TUNGALOY TDX155F20-2 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX155F20-2 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX155F20-2

$453.65
Picture of TUNGALOY TDX150F20-2 15mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX150F20-2 15mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX150F20-2

$453.65
Picture of TUNGALOY TDX145F20-2 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX145F20-2 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX145F20-2

$453.65
Picture of TUNGALOY TDX140F20-2 14mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX140F20-2 14mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX140F20-2

$453.65
Picture of TUNGALOY TDX135F20-2 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX135F20-2 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX135F20-2

$453.65
Picture of TUNGALOY TDX130F20-2 13mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX130F20-2 13mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX130F20-2

$453.65
Picture of TUNGALOY TDX125F20-2 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX125F20-2 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX125F20-2

$453.65
Picture of INGERSOLL TD1900095C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900095C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900095C8R01

$453.60
Picture of INGERSOLL TD2000100JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000100JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000100JFR00

$453.60
Picture of INGERSOLL TD2000100C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000100C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000100C8R01

$453.60
Picture of INGERSOLL TD1900095JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900095JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900095JFR00

$453.60
Picture of INGERSOLL TD2500037S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

INGERSOLL TD2500037S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

ISO: TD2500037S9R01

$453.60
Picture of K-Tool FB-2000 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

K-Tool FB-2000 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

ANSI: FB-2000

ISO: FB-2000

$452.92
Picture of ISCAR D3N 0787-236-100A-3D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0787-236-100A-3D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0787-236-100A-3D

$452.16
Picture of ISCAR D3N 0748-224-100A-3D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0748-224-100A-3D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0748-224-100A-3D

$452.16
Picture of TUNGALOY TID190R20-6 19mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID190R20-6 19mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID190R20-6

$451.50
Picture of TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX200L101-3

$451.21
Picture of TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX200L101-3

$451.21
Picture of TUNGALOY TIDU0433R0625-12 0.4331" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0433R0625-12 0.4331" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0433R0625-12

$450.30
Picture of TUNGALOY TIDU0413R0625-12 0.4134" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0413R0625-12 0.4134" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0413R0625-12

$450.30
Picture of TUNGALOY TID115R16-12 11.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID115R16-12 11.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID115R16-12

$450.30
Picture of TUNGALOY TID110R16-12 11mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID110R16-12 11mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID110R16-12

$450.30
Picture of TUNGALOY TID105R16-12 10.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID105R16-12 10.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID105R16-12

$450.30
Picture of TUNGALOY TIDU0492R0625-12 0.492" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0492R0625-12 0.492" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0492R0625-12

$450.30
Picture of TUNGALOY TIDU0472R0625-12 0.472" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0472R0625-12 0.472" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0472R0625-12

$450.30
Picture of TUNGALOY TID125R16-12 12.5mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID125R16-12 12.5mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID125R16-12

$450.30
Picture of TUNGALOY TID120R16-12 12mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID120R16-12 12mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID120R16-12

$450.30
Picture of ISCAR DRM1750-1750-150-12-1D 1-3/4" Drill ing/Milling Tools

ISCAR DRM1750-1750-150-12-1D 1-3/4" Drill ing/Milling Tools

ISO: DRM1750-1750-150-12-1D

$450.24
Picture of TUNGALOY TIDU0866F1000-1.5 0.866" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0866F1000-1.5 0.866" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0866F1000-1.5

$449.05
Picture of TUNGALOY TIDU0827F1000-1.5 0.827" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0827F1000-1.5 0.827" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0827F1000-1.5

$449.05
Picture of TUNGALOY TID220F25-1.5 22mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID220F25-1.5 22mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID220F25-1.5

$449.05
Picture of TUNGALOY TID210F25-1.5 21mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID210F25-1.5 21mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID210F25-1.5

$449.05
Picture of INGERSOLL Q0135027N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0135027N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0135027N5R01

$448.00
Picture of INGERSOLL Q0127025N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0127025N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0127025N5R01

$448.00
Picture of INGERSOLL TD2400036JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400036JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400036JGR00

$448.00
Picture of INGERSOLL TD2300035JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300035JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300035JGR00

$448.00
Picture of INGERSOLL TD2400036B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400036B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400036B7R01

$448.00
Picture of INGERSOLL TD2300034B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300034B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300034B7R01

$448.00
Picture of ISCAR DCN 0571-685-063R-12D 0.571" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0571-685-063R-12D 0.571" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0571-685-063R-12D

$446.40
Picture of ISCAR DCN 0531-639-063R-12D 0.531" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0531-639-063R-12D 0.531" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0531-639-063R-12D

$446.40
Picture of ISCAR DCN 0551-661-063R-12D 0.551" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0551-661-063R-12D 0.551" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0551-661-063R-12D

$446.40
Picture of ISCAR DCN 0512-614-063R-12D 0.512" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0512-614-063R-12D 0.512" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0512-614-063R-12D

$446.40
Picture of INGERSOLL YD2100105C8R01 0.8268 (21.0 mm) QwikTwist Body

INGERSOLL YD2100105C8R01 0.8268 (21.0 mm) QwikTwist Body

ISO: YD2100105C8R01

$446.33
Picture of ISCAR DCM 0787-630-100A-8D 0.787" Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0787-630-100A-8D 0.787" Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0787-630-100A-8D

$444.48
Picture of ISCAR DCM 0748-598-100A-8D 0.748" Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0748-598-100A-8D 0.748" Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0748-598-100A-8D

$444.48
Picture of INGERSOLL TD1500180S7R01 0.5906 (15.000 mm)-0.6260 (15.900 mm) GoldTwist Body

INGERSOLL TD1500180S7R01 0.5906 (15.000 mm)-0.6260 (15.900 mm) GoldTwist Body

ISO: TD1500180S7R01

$444.27
Picture of INGERSOLL TD1800144S1R01 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

INGERSOLL TD1800144S1R01 0.7087 (18.000 mm)-0.7441 (18.900 mm) GoldTwist Body

ISO: TD1800144S1R01

$444.27
Picture of INGERSOLL TD1700136S7R01 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

INGERSOLL TD1700136S7R01 0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body

ISO: TD1700136S7R01

$444.27
Picture of INGERSOLL TD1500180T4R00 0.5906 (15.000 mm)-0.6260 (15.900 mm) GoldTwist Body

INGERSOLL TD1500180T4R00 0.5906 (15.000 mm)-0.6260 (15.900 mm) GoldTwist Body

ISO: TD1500180T4R00

$444.27
Picture of K-Tool FB-1875-3 Multi Insert Drill 1.875 Cutter Diameter 1.500 Weldon

K-Tool FB-1875-3 Multi Insert Drill 1.875 Cutter Diameter 1.500 Weldon

ANSI: FB-1875-3

ISO: FB-1875-3

$441.31
Picture of WIDIA/KENNAMETAL TDMX0867R3SL100 TDMX Drill BODY D.867 3XD SL S

WIDIA/KENNAMETAL TDMX0867R3SL100 TDMX Drill BODY D.867 3XD SL S

$441.20
Picture of WIDIA/KENNAMETAL TDMX0827R3SL100 TDMX Drill BODY D.827 3XD SL S

WIDIA/KENNAMETAL TDMX0827R3SL100 TDMX Drill BODY D.827 3XD SL S

$441.20
Picture of WIDIA/KENNAMETAL TDMX220R3SL25M TDMX Drill BODY D=22MM 3XD SL

WIDIA/KENNAMETAL TDMX220R3SL25M TDMX Drill BODY D=22MM 3XD SL

$441.20
Picture of WIDIA/KENNAMETAL TDMX210R3SL25M TDMX Drill BODY D=21MM 3XD SL

WIDIA/KENNAMETAL TDMX210R3SL25M TDMX Drill BODY D=21MM 3XD SL

$441.20
Picture of WIDIA/KENNAMETAL TDMX160R12SF20M TDMX BODY D=16MM 12XD SF Shank

WIDIA/KENNAMETAL TDMX160R12SF20M TDMX BODY D=16MM 12XD SF Shank

$439.49
Picture of WIDIA/KENNAMETAL TDMX0630R12SF075 TDMX BODY D.630 12XD SF Shank

WIDIA/KENNAMETAL TDMX0630R12SF075 TDMX BODY D.630 12XD SF Shank

$439.49
Picture of WIDIA/KENNAMETAL TDMX260R1SL32M TDMX BODY D=26MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX260R1SL32M TDMX BODY D=26MM 1XD SL Shank

$439.49
Picture of WIDIA/KENNAMETAL TDMX250R1SL32M TDMX BODY D=25MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX250R1SL32M TDMX BODY D=25MM 1XD SL Shank

$439.49
Picture of WIDIA/KENNAMETAL TDMX1024R1SL125 TDMX BODY D1.024 1XD SL Shank

WIDIA/KENNAMETAL TDMX1024R1SL125 TDMX BODY D1.024 1XD SL Shank

$439.49
Picture of WIDIA/KENNAMETAL TDMX0985R1SL125 TDMX BODY D.985 1XD SL Shank 1

WIDIA/KENNAMETAL TDMX0985R1SL125 TDMX BODY D.985 1XD SL Shank 1

$439.49
Picture of YG-1 ZJ0704 1.2402 Min DIA 1.2594 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZJ0704 1.2402 Min DIA 1.2594 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$439.24
Picture of YG-1 ZJ0703 1.2205 Min DIA 1.2398 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZJ0703 1.2205 Min DIA 1.2398 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$439.24
Picture of YG-1 ZJ0702 1.2008 Min DIA 1.2201 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZJ0702 1.2008 Min DIA 1.2201 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$439.24
Picture of ISCAR DCM 0866-433-100A-5D 0.901" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0866-433-100A-5D 0.901" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0866-433-100A-5D

$438.72
Picture of TUNGALOY TID150F20-8 15mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID150F20-8 15mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID150F20-8

$438.00
Picture of TUNGALOY TIDU0394R0625-12 0.3937" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0394R0625-12 0.3937" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0394R0625-12

$438.00
Picture of TUNGALOY TID100R16-12 10mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID100R16-12 10mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID100R16-12

$438.00
Picture of INGERSOLL QR0135027N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135027N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135027N5R02

$437.73
Picture of INGERSOLL QR0127025N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0127025N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0127025N5R02

$437.73
Picture of INGERSOLL QR0125025JER00 0.492 (12.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0125025JER00 0.492 (12.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0125025JER00

$437.73
Picture of INGERSOLL QR0135027JER00 0.531 (13.49 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135027JER00 0.531 (13.49 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135027JER00

$437.73
Picture of INGERSOLL QR0130026JER00 0.512 (13.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0130026JER00 0.512 (13.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0130026JER00

$437.73
Picture of INGERSOLL QR0120024JER00 0.472 (11.99 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0120024JER00 0.472 (11.99 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0120024JER00

$437.73
Picture of INGERSOLL QR0150030N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150030N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150030N5R02

$437.73
Picture of INGERSOLL QR0143029N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0143029N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0143029N5R02

$437.73
Picture of INGERSOLL QR0145030JER00 0.571 (14.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0145030JER00 0.571 (14.50 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0145030JER00

$437.73
Picture of ISCAR D3N 0709-354-100R-5D 0.709" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0709-354-100R-5D 0.709" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0709-354-100R-5D

$436.80
Picture of ISCAR D3N 0669-335-075R-5D 0.669" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0669-335-075R-5D 0.669" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0669-335-075R-5D

$436.80
Picture of INGERSOLL YD1400112C0R01 0.5512 (14.0 mm) QwikTwist Body

INGERSOLL YD1400112C0R01 0.5512 (14.0 mm) QwikTwist Body

ISO: YD1400112C0R01

$436.80
Picture of INGERSOLL YD1300104C0R01 0.5118 (13.0 mm) QwikTwist Body

INGERSOLL YD1300104C0R01 0.5118 (13.0 mm) QwikTwist Body

ISO: YD1300104C0R01

$436.80
Picture of INGERSOLL TD1450174S6R01 0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body

INGERSOLL TD1450174S6R01 0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body

ISO: TD1450174S6R01

$435.87
Picture of INGERSOLL TD1400168S6R01 0.5512 (14.000 mm)-0.5669 (14.400 mm) GoldTwist Body

INGERSOLL TD1400168S6R01 0.5512 (14.000 mm)-0.5669 (14.400 mm) GoldTwist Body

ISO: TD1400168S6R01

$435.87
Picture of INGERSOLL TD1350162S6R01 0.5315 (13.500 mm)-0.5472 (13.900 mm) GoldTwist Body

INGERSOLL TD1350162S6R01 0.5315 (13.500 mm)-0.5472 (13.900 mm) GoldTwist Body

ISO: TD1350162S6R01

$435.87
Picture of INGERSOLL TD1300156S6R01 0.5118 (13.000 mm)-0.5276 (13.400 mm) GoldTwist Body

INGERSOLL TD1300156S6R01 0.5118 (13.000 mm)-0.5276 (13.400 mm) GoldTwist Body

ISO: TD1300156S6R01

$435.87
Picture of INGERSOLL TD1450174T3R00 0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body

INGERSOLL TD1450174T3R00 0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body

ISO: TD1450174T3R00

$435.87
Picture of INGERSOLL TD1400168T3R00 0.5512 (14.000 mm)-0.5669 (14.400 mm) GoldTwist Body

INGERSOLL TD1400168T3R00 0.5512 (14.000 mm)-0.5669 (14.400 mm) GoldTwist Body

ISO: TD1400168T3R00

$435.87
Picture of INGERSOLL TD1350162T3R00 0.5315 (13.500 mm)-0.5472 (13.900 mm) GoldTwist Body

INGERSOLL TD1350162T3R00 0.5315 (13.500 mm)-0.5472 (13.900 mm) GoldTwist Body

ISO: TD1350162T3R00

$435.87
Picture of INGERSOLL TD1300156T3R00 0.5118 (13.000 mm)-0.5276 (13.400 mm) GoldTwist Body

INGERSOLL TD1300156T3R00 0.5118 (13.000 mm)-0.5276 (13.400 mm) GoldTwist Body

ISO: TD1300156T3R00

$435.87
Picture of WIDIA/KENNAMETAL TDMX0709R8SL100 TDMX Drill BODY D.709 8XD SL S

WIDIA/KENNAMETAL TDMX0709R8SL100 TDMX Drill BODY D.709 8XD SL S

$435.53
Picture of WIDIA/KENNAMETAL TDMX0670R8SL075 TDMX Drill BODY D.670 8XD SL S

WIDIA/KENNAMETAL TDMX0670R8SL075 TDMX Drill BODY D.670 8XD SL S

$435.53
Picture of WIDIA/KENNAMETAL TDMX0788R5SL100 TDMX Drill BODY D.788 5XD SL S

WIDIA/KENNAMETAL TDMX0788R5SL100 TDMX Drill BODY D.788 5XD SL S

$435.53
Picture of WIDIA/KENNAMETAL TDMX0749R5SL100 TDMX Drill BODY D.749 5XD SL S

WIDIA/KENNAMETAL TDMX0749R5SL100 TDMX Drill BODY D.749 5XD SL S

$435.53
Picture of WIDIA/KENNAMETAL TDMX180R8SL25M TDMX Drill BODY D=18MM 8XD SL

WIDIA/KENNAMETAL TDMX180R8SL25M TDMX Drill BODY D=18MM 8XD SL

$435.53
Picture of WIDIA/KENNAMETAL TDMX170R8SL20M TDMX Drill BODY D=17MM 8XD SL

WIDIA/KENNAMETAL TDMX170R8SL20M TDMX Drill BODY D=17MM 8XD SL

$435.53
Picture of WIDIA/KENNAMETAL TDMX200R5SL25M TDMX Drill BODY D=20MM 5XD SL

WIDIA/KENNAMETAL TDMX200R5SL25M TDMX Drill BODY D=20MM 5XD SL

$435.53
Picture of WIDIA/KENNAMETAL TDMX190R5SL25M TDMX Drill BODY D=19MM 5XD SL

WIDIA/KENNAMETAL TDMX190R5SL25M TDMX Drill BODY D=19MM 5XD SL

$435.53
Picture of YG-1 ZJ0701 1.1811 Min DIA 1.2004 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZJ0701 1.1811 Min DIA 1.2004 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$435.19
Picture of YG-1 ZI0704 1.1614 Min DIA 1.1807 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZI0704 1.1614 Min DIA 1.1807 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$435.19
Picture of YG-1 ZI0703 1.1417 Min DIA 1.1610 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZI0703 1.1417 Min DIA 1.1610 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$435.19
Picture of YG-1 ZI0702 1.1220 Min DIA 1.1413 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

YG-1 ZI0702 1.1220 Min DIA 1.1413 Max DIA I-Dream Drill Holder, FLANGED Shank (7XD)

$435.19
Picture of ZCC ZTD05-1.719"-XP1.50"-SP14-02 1.719" DIA Square Insert Drill

ZCC ZTD05-1.719"-XP1.50"-SP14-02 1.719" DIA Square Insert Drill

$435.01
Picture of ZCC ZTD05-1.687"-XP1.50"-SP14-02 1.687" DIA Square Insert Drill

ZCC ZTD05-1.687"-XP1.50"-SP14-02 1.687" DIA Square Insert Drill

$435.01
Picture of ISCAR DRM1500-1500-150-12-1D 1-1/2" Drill ing/Milling Tools

ISCAR DRM1500-1500-150-12-1D 1-1/2" Drill ing/Milling Tools

ISO: DRM1500-1500-150-12-1D

$434.88
Picture of ISCAR DCNS 0945-283-094B-3D 0.945" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0945-283-094B-3D 0.945" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3xD, Suitable for Chamfer ing Holders

ISO: DCNS 0945-283-094B-3D

$433.92
Picture of ISCAR DCNS 0906-272-090B-3D 0.906" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0906-272-090B-3D 0.906" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 3xD, Suitable for Chamfer ing Holders

ISO: DCNS 0906-272-090B-3D

$433.92