Drill

Sort by
Picture of TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS310F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1250F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1312F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1250FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1312FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX310F32-4

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0428128N6R01 1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0428128N6R01 1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0428128N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0437131N6R01 1.719 (43.66 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0437131N6R01 1.719 (43.66 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0437131N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0445134N6R01 1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0445134N6R01 1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0445134N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0413124N6R01 1.625 (41.28 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0413124N6R01 1.625 (41.28 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0413124N6R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX300L139-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX300L139-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0450135JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0450135JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0450135JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460138JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460138JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460138JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0470141JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0470141JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0470141JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0480144JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0480144JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0480144JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0490147JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0490147JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0490147JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500150JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500150JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500150JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0452136N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0452136N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0452136N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460138N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460138N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460138N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0476143N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0476143N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0476143N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0492148N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0492148N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0492148N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500150N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500150N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500150N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0508152N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0508152N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0508152N7R02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1375-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS340F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX340F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1375FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1437FS-03

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0340136JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0340136JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0340136JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0350140JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0350140JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0350140JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0360144JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0360144JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0360144JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0341136N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0341136N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0341136N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0365146N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0365146N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0365146N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0357143N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0357143N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0357143N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0349140N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0349140N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0349140N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0373112N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0373112N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0373112N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0381114N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0381114N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0381114N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0389117N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0389117N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0389117N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0397119N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0397119N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0397119N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0405122N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0405122N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0405122N6R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1437-02 1.437" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1437-02 1.437" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1437-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1500-02 1-1/2" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1500-02 1-1/2" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1500-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1562-02 1.562" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1562-02 1.562" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1562-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS370F40-2 37mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS370F40-2 37mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS370F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS380F40-2 38mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS380F40-2 38mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS380F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS400F40-2 40mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS400F40-2 40mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS400F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS390F40-2 39mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS390F40-2 39mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS390F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX380F40-2 38mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX380F40-2 38mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX380F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX370F40-2 37mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX370F40-2 37mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX370F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX390F40-2 39mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX390F40-2 39mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX390F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX400F40-2 40mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX400F40-2 40mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX400F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1500FS-02 1-1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1500FS-02 1-1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1500FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1562FS-02 1.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1562FS-02 1.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1562FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR17.45XU25.4A-15 0.687" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR17.45XU25.4A-15 0.687" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR17.45XU25.4A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR15.88XU25.4-15 0.6252" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR15.88XU25.4-15 0.6252" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR15.88XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR18.00XM25A-15 18mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR18.00XM25A-15 18mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR18.00XM25A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR18.64XU25.4-15 0.7339" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR18.64XU25.4-15 0.7339" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR18.64XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR20.62XU31.75-15 0.8118" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR20.62XU31.75-15 0.8118" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR20.62XU31.75-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR16.00XM25A-15 16mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR16.00XM25A-15 16mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR16.00XM25A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR16.50XM25A-15 16.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR16.50XM25A-15 16.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR16.50XM25A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR20.00XM32-15 20mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR20.00XM32-15 20mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR20.00XM32-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR19.00XM25-15 19mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR19.00XM25-15 19mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR19.00XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR17.00XM25A-15 17mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR17.00XM25A-15 17mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR17.00XM25A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR18.50XM25-15 18.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR18.50XM25-15 18.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR18.50XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR19.50XM25-15 19.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR19.50XM25-15 19.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR19.50XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR17.50XM25A-15 17.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR17.50XM25A-15 17.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR17.50XM25A-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR18.24XU25.4-15 0.7181" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR18.24XU25.4-15 0.7181" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR18.24XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR19.05XU25.4-15 3/4" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR19.05XU25.4-15 3/4" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR19.05XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR19.94XU31.75-15 0.785" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR19.94XU31.75-15 0.785" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR19.94XU31.75-15

Call (262) 251-4020 for pricing
Picture of ISCAR DR1500-4500-150-12-3D-N 1-1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1500-4500-150-12-3D-N 1-1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1500-4500-150-12-3D-N

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0428086N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0428086N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0428086N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0413083N6R01 1.625 (41.28 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0413083N6R01 1.625 (41.28 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0413083N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0437087N6R01 1.719 (43.66 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0437087N6R01 1.719 (43.66 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0437087N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0445089N6R01 1.750 (44.45 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0445089N6R01 1.750 (44.45 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0445089N6R01

Call (262) 251-4020 for pricing
Picture of K-Tool FB-3500 Multi Insert Drill 3.500 Cutter Diameter 2.000 Weldon

K-Tool FB-3500 Multi Insert Drill 3.500 Cutter Diameter 2.000 Weldon

ANSI: FB-3500

ISO: FB-3500

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.00XM25-25 14mm Drill body for lathes and machining centers, L/D = 25

TUNGALOY MCTR14.00XM25-25 14mm Drill body for lathes and machining centers, L/D = 25

ISO: MCTR14.00XM25-25

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.50XM25-25 14.5mm Drill body for lathes and machining centers, L/D = 25

TUNGALOY MCTR14.50XM25-25 14.5mm Drill body for lathes and machining centers, L/D = 25

ISO: MCTR14.50XM25-25

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR15.00XM25-25 15mm Drill body for lathes and machining centers, L/D = 25

TUNGALOY MCTR15.00XM25-25 15mm Drill body for lathes and machining centers, L/D = 25

ISO: MCTR15.00XM25-25

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.27XU25.4-25 0.5618" Drill body for lathes and machining centers, L/D = 25

TUNGALOY MCTR14.27XU25.4-25 0.5618" Drill body for lathes and machining centers, L/D = 25

ISO: MCTR14.27XU25.4-25

Call (262) 251-4020 for pricing
Picture of ISCAR DR1625-3250-150-12-2D-N 1-5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1625-3250-150-12-2D-N 1-5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1625-3250-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1687-3375-150-12-2D-N 1.687" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1687-3375-150-12-2D-N 1.687" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1687-3375-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1750-3500-150-12-2D-N 1-3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1750-3500-150-12-2D-N 1-3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1750-3500-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.00XM25-20 14mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR14.00XM25-20 14mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR14.00XM25-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.50XM25-20 14.5mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR14.50XM25-20 14.5mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR14.50XM25-20

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0381114N6R01 1.500 (38.10 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0381114N6R01 1.500 (38.10 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0381114N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0389117N6R01 1.531 (38.89 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0389117N6R01 1.531 (38.89 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0389117N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0397119N6R01 1.562 (39.67 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0397119N6R01 1.562 (39.67 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0397119N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0341102N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0341102N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0341102N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0357107N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0357107N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0357107N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0365110N6R01 1.437 (36.50 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0365110N6R01 1.437 (36.50 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0365110N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0349105N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0349105N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0349105N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0262105N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0262105N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0262105N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0270108N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0270108N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0270108N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0294118N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0294118N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0294118N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0302120N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0302120N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0302120N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0278111N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0286114N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0492098N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0492098N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0492098N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0508102N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0508102N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0508102N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500100N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500100N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500100N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0476095N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0476095N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0476095N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0452090N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0452090N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0452090N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460092N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460092N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460092N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0450090JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0450090JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0450090JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460092JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460092JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460092JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0470094JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0470094JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0470094JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0480096JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0480096JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0480096JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0490098JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0490098JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0490098JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500100JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500100JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500100JHR00

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1375-02 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1375-02 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1375-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS340F40-2 34mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS340F40-2 34mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS340F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS360F40-2 36mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS360F40-2 36mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS360F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS350F40-2 35mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS350F40-2 35mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS350F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX360F40-2 36mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX360F40-2 36mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX360F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX350F40-2 35mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX350F40-2 35mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX350F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX340F40-2 34mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX340F40-2 34mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX340F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1437FS-02 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1437FS-02 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1437FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1375FS-02 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1375FS-02 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1375FS-02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0305150JGR00 1.201 (30.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0305150JGR00 1.201 (30.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0305150JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0302151N6R02 1.187 (30.15 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0302151N6R02 1.187 (30.15 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0302151N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0270135JFR00 1.063 (27.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270135JFR00 1.063 (27.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270135JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0280140JFR00 1.102 (28.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0280140JFR00 1.102 (28.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0280140JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0262131N6R02 1.031 (26.19 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0262131N6R02 1.031 (26.19 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0262131N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0270135N6R02 1.063 (27.00 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270135N6R02 1.063 (27.00 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270135N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0278139N6R02 1.094 (27.79 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0278139N6R02 1.094 (27.79 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0278139N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0286143N6R02 1.125 (28.58 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0286143N6R02 1.125 (28.58 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0286143N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0294147N6R02 1.156 (29.36 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0294147N6R02 1.156 (29.36 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0294147N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0290145JGR00 1.142 (29.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0290145JGR00 1.142 (29.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0290145JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0300150JGR00 1.181 (30.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0300150JGR00 1.181 (30.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0300150JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0255130JFR00 1.004 (25.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0255130JFR00 1.004 (25.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0255130JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0260130JFR00 1.024 (26.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0260130JFR00 1.024 (26.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0260130JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0381076N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0381076N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0381076N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0373075N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0373075N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0373075N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0389078N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0389078N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0389078N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0397079N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0397079N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0397079N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0405081N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0405081N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0405081N6R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1000FS-05 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-1000FS-05 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-1000FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0937FS-05 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0937FS-05 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0937FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX255F25-5 25.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX255F25-5 25.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX255F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX250F25-5 25mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX250F25-5 25mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX250F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX230F25-5 23mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX230F25-5 23mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX230F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX235F25-5 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX235F25-5 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX235F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX240F25-5 24mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX240F25-5 24mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX240F25-5

Call (262) 251-4020 for pricing
Picture of ISCAR DR1375-4125-150-12-3D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1375-4125-150-12-3D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1375-4125-150-12-3D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1437-4311-150-12-3D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1437-4311-150-12-3D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1437-4311-150-12-3D-N

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS310F32-3 31mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS310F32-3 31mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS310F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS320F32-3 32mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS320F32-3 32mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS320F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS330F40-3 33mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS330F40-3 33mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS330F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250-03 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1250-03 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1250-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1312-03 1.312" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1312-03 1.312" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1312-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250F32-3 31.8mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1250F32-3 31.8mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1250F32-3

Call (262) 251-4020 for pricing
Picture of ISCAR DR1031-4124-125-09-4D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR1031-4124-125-09-4D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR1031-4124-125-09-4D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1062-4248-125-09-4D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR1062-4248-125-09-4D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR1062-4248-125-09-4D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1125-4500-125-09-4D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR1125-4500-125-09-4D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR1125-4500-125-09-4D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1187-4748-125-09-4D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR1187-4748-125-09-4D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR1187-4748-125-09-4D-N

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0320128JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0320128JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0320128JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0330132JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0330132JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0330132JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0310124N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310124N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310124N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0333133N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0333133N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0333133N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0325130N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0325130N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0325130N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0318127N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0318127N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0318127N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0310124JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310124JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310124JGR00

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1312FS-03 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1312FS-03 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1312FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1250FS-03 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1250FS-03 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1250FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX320F32-3 32mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX320F32-3 32mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX320F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX310F32-3 31mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX310F32-3 31mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX310F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX330F40-3 33mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX330F40-3 33mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX330F40-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0206103N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0206103N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0206103N5R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0230115N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0230115N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0230115N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0238119N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0238119N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0238119N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0246123N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0246123N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0246123N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0250125N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0250125N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0250125N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0254127N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0254127N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0254127N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0410123JHR00 1.614 (41.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0410123JHR00 1.614 (41.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0410123JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0420126JHR00 1.654 (42.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0420126JHR00 1.654 (42.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0420126JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0430129JHR00 1.693 (43.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0430129JHR00 1.693 (43.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0430129JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0440132JHR00 1.732 (44.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0440132JHR00 1.732 (44.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0440132JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0222111N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0222111N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0222111N5R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0437131N7R02 1.719 (43.66 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0437131N7R02 1.719 (43.66 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0437131N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0445134N7R02 1.750 (44.45 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0445134N7R02 1.750 (44.45 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0445134N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0428128N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0428128N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0428128N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0413124N6R02 1.625 (41.28 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0413124N6R02 1.625 (41.28 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0413124N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0214107N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0214107N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0214107N5R02

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR15.00XM25-15 15mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR15.00XM25-15 15mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR15.00XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.00XM25-15 14mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR14.00XM25-15 14mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR14.00XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.50XM25-15 14.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR14.50XM25-15 14.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR14.50XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR14.27XU25.4-15 0.5618" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR14.27XU25.4-15 0.5618" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR14.27XU25.4-15

Call (262) 251-4020 for pricing
Picture of ISCAR DR1500-3000-150-12-2D-N 1-1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1500-3000-150-12-2D-N 1-1/2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1500-3000-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1562-3125-150-12-2D-N 1.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1562-3125-150-12-2D-N 1.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1562-3125-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR17.45XU25.4A-10 0.687" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR17.45XU25.4A-10 0.687" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR17.45XU25.4A-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR16.00XM25A-10 16mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR16.00XM25A-10 16mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR16.00XM25A-10

Call (262) 251-4020 for pricing