Agricultural

Sort by
Picture of ISCAR ICP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0697-2M IC908

$105.95
Picture of ISCAR ICP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0689-2M IC908

$105.95
Picture of ISCAR ICP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0685-2M IC908

$105.95
Picture of ISCAR ICP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0677-2M IC908

$105.95
Picture of ISCAR ICP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0673-2M IC908

$105.95
Picture of ISCAR ICP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0657-2M IC908

$105.95
Picture of ISCAR ICP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0654-2M IC908

$105.95
Picture of ISCAR ICP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0650-2M IC908

$105.95
Picture of ISCAR ICP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0642-2M IC908

$105.95
Picture of ISCAR ICP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0709-2M IC908

$105.95
Picture of ISCAR ICP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0669-2M IC908

$105.95
Picture of ISCAR ICP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0634-2M IC908

$105.95
Picture of ISCAR IDI 0988-SK IC908 .988" DCM Drill Heads for Cast Iron

ISCAR IDI 0988-SK IC908 .988" DCM Drill Heads for Cast Iron

ISO: IDI 0988-SK IC908

$105.95
Picture of ISCAR IDI 0996-SG IC908 .996" General Use DCM Drill Heads

ISCAR IDI 0996-SG IC908 .996" General Use DCM Drill Heads

ISO: IDI 0996-SG IC908

$105.95
Picture of ISCAR IDI 0988-SG IC908 .988" General Use DCM Drill Heads

ISCAR IDI 0988-SG IC908 .988" General Use DCM Drill Heads

ISO: IDI 0988-SG IC908

$105.95
Picture of ISCAR IDI 0992-SG IC908 .992" General Use DCM Drill Heads

ISCAR IDI 0992-SG IC908 .992" General Use DCM Drill Heads

ISO: IDI 0992-SG IC908

$105.95
Picture of ISCAR IDI 1012-SG IC908 1.012" General Use DCM Drill Heads

ISCAR IDI 1012-SG IC908 1.012" General Use DCM Drill Heads

ISO: IDI 1012-SG IC908

$105.95
Picture of ISCAR IDI 1007-SG IC908 1.007" General Use DCM Drill Heads

ISCAR IDI 1007-SG IC908 1.007" General Use DCM Drill Heads

ISO: IDI 1007-SG IC908

$105.95
Picture of ISCAR IDI 1016-SG IC908 1.016" General Use DCM Drill Heads

ISCAR IDI 1016-SG IC908 1.016" General Use DCM Drill Heads

ISO: IDI 1016-SG IC908

$105.95
Picture of ISCAR IDI 1020-SK IC908 1.020" DCM Drill Heads for Cast Iron

ISCAR IDI 1020-SK IC908 1.020" DCM Drill Heads for Cast Iron

ISO: IDI 1020-SK IC908

$105.95
Picture of ISCAR IDI 1004-SK IC908 1.004" DCM Drill Heads for Cast Iron

ISCAR IDI 1004-SK IC908 1.004" DCM Drill Heads for Cast Iron

ISO: IDI 1004-SK IC908

$105.95
Picture of ISCAR IDI 1000-SK IC908 1.000" DCM Drill Heads for Cast Iron

ISCAR IDI 1000-SK IC908 1.000" DCM Drill Heads for Cast Iron

ISO: IDI 1000-SK IC908

$105.95
Picture of ISCAR IDI 0984-SK IC908 .984" DCM Drill Heads for Cast Iron

ISCAR IDI 0984-SK IC908 .984" DCM Drill Heads for Cast Iron

ISO: IDI 0984-SK IC908

$105.95
Picture of ISCAR IDI 1020-SG IC908 1.020" General Use DCM Drill Heads

ISCAR IDI 1020-SG IC908 1.020" General Use DCM Drill Heads

ISO: IDI 1020-SG IC908

$105.95
Picture of ISCAR IDI 1004-SG IC908 1.004" General Use DCM Drill Heads

ISCAR IDI 1004-SG IC908 1.004" General Use DCM Drill Heads

ISO: IDI 1004-SG IC908

$105.95
Picture of ISCAR IDI 1000-SG IC908 1.000" General Use DCM Drill Heads

ISCAR IDI 1000-SG IC908 1.000" General Use DCM Drill Heads

ISO: IDI 1000-SG IC908

$105.95
Picture of ISCAR IDI 0984-SG IC908 .984" General Use DCM Drill Heads

ISCAR IDI 0984-SG IC908 .984" General Use DCM Drill Heads

ISO: IDI 0984-SG IC908

$105.95
Picture of ISCAR QCP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0709-2M IC908

$105.95
Picture of ISCAR QCP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0705-2M IC908

$105.95
Picture of ISCAR QCP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0701-2M IC908

$105.95
Picture of ISCAR QCP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0697-2M IC908

$105.95
Picture of ISCAR QCP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0689-2M IC908

$105.95
Picture of ISCAR QCP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0685-2M IC908

$105.95
Picture of ISCAR QCP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0677-2M IC908

$105.95
Picture of ISCAR QCP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0673-2M IC908

$105.95
Picture of ISCAR QCP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0669-2M IC908

$105.95
Picture of ISCAR QCP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0657-2M IC908

$105.95
Picture of ISCAR QCP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0654-2M IC908

$105.95
Picture of ISCAR QCP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0650-2M IC908

$105.95
Picture of ISCAR QCP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0642-2M IC908

$105.95
Picture of ISCAR QCP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0638-2M IC908

$105.95
Picture of ISCAR QCP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0634-2M IC908

$105.95
Picture of TUNGALOY TECR080B3-12/40W08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECR080B3-12/40W08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

$105.94
Picture of TUNGALOY TECR080B3-12/40C08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECR080B3-12/40C08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

$105.94
Picture of TUNGALOY TECR100B4M-20C10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TECR100B4M-20C10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

$105.94
Picture of TUNGALOY TECR100B4M-20W10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TECR100B4M-20W10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

$105.94
Picture of AWARD B45-202TIN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD B45-202TIN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute HSS TiN Single End Ball Nose

$105.94
Picture of AWARD BV-805TIN DIA 1/2 SH 0.7500 LOC 1.2500 OAL 3.6250 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BV-805TIN DIA 1/2 SH 0.7500 LOC 1.2500 OAL 3.6250 End Mill Taper Flute HSS TiN Single End Ball Nose

$105.92
Picture of LMT FETTE 1402562 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1402562 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$105.91
Picture of EMUGE 3442.08030A DIA 3MM SH 0.4724 LOC 0.2756 OAL 2.4803 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3442.08030A DIA 3MM SH 0.4724 LOC 0.2756 OAL 2.4803 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

$105.91
Picture of ICE-ECO-0629921-4-150-75-SQ-RND-BRITE-L DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Single End Square Sharp Blue

ICE-ECO-0629921-4-150-75-SQ-RND-BRITE-L DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Single End Square Sharp Blue

$105.90
Picture of ICE-ECO-0629921-2-150-75-SQ-RND-BRITE-L DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Single End Square Sharp Blue

ICE-ECO-0629921-2-150-75-SQ-RND-BRITE-L DIA 16MM SH 0.6299 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Single End Square Sharp Blue

$105.90
Picture of AWARD KK-613-CBTIALN DIA 3/8 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD KK-613-CBTIALN DIA 3/8 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.87
Picture of AWARD BR-212-COTIN DIA 1/8 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BR-212-COTIN DIA 1/8 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$105.87
Picture of YG-1 S04815 4-1/2 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 S04815 4-1/2 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

$105.83
Picture of YG-1 S04811 4-3/8 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 S04811 4-3/8 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

$105.83
Picture of YG-1 S04807 4-1/4 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 S04807 4-1/4 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

$105.83
Picture of YG-1 S04804 4-1/8 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 S04804 4-1/8 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

$105.83
Picture of YG-1 S04802 4-1/16 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 S04802 4-1/16 HSS(M4) Throw Away Spade Drill Insert HARDSLICK Coated

$105.83
Picture of YG-1 S03815 4-1/2 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

YG-1 S03815 4-1/2 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

$105.83
Picture of YG-1 S03811 4-3/8 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

YG-1 S03811 4-3/8 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

$105.83
Picture of YG-1 S03807 4-1/4 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

YG-1 S03807 4-1/4 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

$105.83
Picture of YG-1 S03804 4-1/8 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

YG-1 S03804 4-1/8 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

$105.83
Picture of YG-1 S03802 4-1/16 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

YG-1 S03802 4-1/16 HSS(M4) Throw Away Spade Drill Insert TIALN-Coated

$105.83
Picture of YG-1 66426CN DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

YG-1 66426CN DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

$105.73
Picture of TUNGALOY VRD050L27R062-U06S08 AH725 DIA 1/2 SH T12 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

TUNGALOY VRD050L27R062-U06S08 AH725 DIA 1/2 SH T12 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

$105.72
Picture of TUNGALOY VRD050L27R125-U06S08 AH725 DIA 1/2 SH T06 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM TUNG MEISTER

TUNGALOY VRD050L27R125-U06S08 AH725 DIA 1/2 SH T06 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM TUNG MEISTER

$105.72
Picture of TUNGALOY VRD050L27R156-U06S08 AH725 DIA 1/2 SH T10 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1560 3.96MM TUNG MEISTER

TUNGALOY VRD050L27R156-U06S08 AH725 DIA 1/2 SH T10 LOC 0.2700 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1560 3.96MM TUNG MEISTER

$105.72
Picture of TUNGALOY VRD120L07.0R40-06S08 AH725 DIA 12MM SH T05 LOC 0.2756 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1575 4.00MM TUNG MEISTER

TUNGALOY VRD120L07.0R40-06S08 AH725 DIA 12MM SH T05 LOC 0.2756 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1575 4.00MM TUNG MEISTER

$105.72
Picture of AWARD O-310-CBTIALN DIA 3/16 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD O-310-CBTIALN DIA 3/16 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.71
Picture of AWARD N-409-CBTIALN DIA 1/4 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD N-409-CBTIALN DIA 1/4 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.71
Picture of AWARD M-609-CBTIALN DIA 3/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD M-609-CBTIALN DIA 3/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.71
Picture of AWARD R-208-CBTIALN DIA 1/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD R-208-CBTIALN DIA 1/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.71
Picture of AWARD O-507-CBTIALN DIA 5/16 SH 0.6250 LOC 1.7500 OAL 4.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD O-507-CBTIALN DIA 5/16 SH 0.6250 LOC 1.7500 OAL 4.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$105.71
Picture of EMUGE B1969501.0080 Tap Plug M8-1.25MM 6H Metric DIN/DIN Coolant HSSE TiCN

EMUGE B1969501.0080 Tap Plug M8-1.25MM 6H Metric DIN/DIN Coolant HSSE TiCN

ISO: B1969501.0080

$105.67
Picture of ISCAR MM TS-A-L070-C08-T04 SH 0.3150 OAL 2.7560 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

ISCAR MM TS-A-L070-C08-T04 SH 0.3150 OAL 2.7560 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

$105.60
Picture of ISCAR MM S-A-L2.18-W.500-T05 SH 0.50 OAL 2.1900 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

ISCAR MM S-A-L2.18-W.500-T05 SH 0.50 OAL 2.1900 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

$105.60
Picture of ISCAR MM S-A-L2.50-C.312-T05 SH 0.3125 OAL 2.50 Replacable Head Acc. 85° Conical Steel Single End MULTI-MASTER

ISCAR MM S-A-L2.50-C.312-T05 SH 0.3125 OAL 2.50 Replacable Head Acc. 85° Conical Steel Single End MULTI-MASTER

$105.60
Picture of ISCAR MM TS-A-L2.75-C.312-T05 SH 0.3125 OAL 2.7500 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

ISCAR MM TS-A-L2.75-C.312-T05 SH 0.3125 OAL 2.7500 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

$105.60
Picture of GORILLA MILL GMTMAC14-28UN3FL2X Carbide Thread Mill Helical 1/4" 28.00TPI UN TIALN 0.5180 13.16MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC14-28UN3FL2X Carbide Thread Mill Helical 1/4" 28.00TPI UN TIALN 0.5180 13.16MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC14-28UN3FL2X

$105.58
Picture of GORILLA MILL GMTMAC14-20UN3FL2X Carbide Thread Mill Helical 1/4" 20.00TPI UN TIALN 0.5250 13.34MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC14-20UN3FL2X Carbide Thread Mill Helical 1/4" 20.00TPI UN TIALN 0.5250 13.34MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC14-20UN3FL2X

$105.58
Picture of GORILLA MILL GMTMAC14-20UN3FL1.5X Carbide Thread Mill Helical 1/4" 20.00TPI UN TIALN 0.3750 9.53MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC14-20UN3FL1.5X Carbide Thread Mill Helical 1/4" 20.00TPI UN TIALN 0.3750 9.53MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC14-20UN3FL1.5X

$105.58
Picture of GORILLA MILL GMTMAC12-32UN3FL2X Carbide Thread Mill Helical #12 32.00TPI UN TIALN 0.4530 11.51MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC12-32UN3FL2X Carbide Thread Mill Helical #12 32.00TPI UN TIALN 0.4530 11.51MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC12-32UN3FL2X

$105.58
Picture of GORILLA MILL GMTMAC12-28UN3FL2X Carbide Thread Mill Helical #12 28.00TPI UN TIALN 0.4460 11.33MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC12-28UN3FL2X Carbide Thread Mill Helical #12 28.00TPI UN TIALN 0.4460 11.33MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC12-28UN3FL2X

$105.58
Picture of GORILLA MILL GMTMAC12-24UN3FL2X Carbide Thread Mill Helical #12 24.00TPI UN TIALN 0.4370 11.10MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC12-24UN3FL2X Carbide Thread Mill Helical #12 24.00TPI UN TIALN 0.4370 11.10MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC12-24UN3FL2X

$105.58
Picture of GORILLA MILL GMTMAC12-24UN3FL1.5X Carbide Thread Mill Helical #12 24.00TPI UN TIALN 0.3540 8.99MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC12-24UN3FL1.5X Carbide Thread Mill Helical #12 24.00TPI UN TIALN 0.3540 8.99MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC12-24UN3FL1.5X

$105.58
Picture of GORILLA MILL GMTMAC0600MM-1.003FL2X Carbide Thread Mill Helical M6 1.00MM Metric TIALN 0.4920 12.50MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC0600MM-1.003FL2X Carbide Thread Mill Helical M6 1.00MM Metric TIALN 0.4920 12.50MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC0600MM-1.003FL2X

$105.58
Picture of GORILLA MILL GMTMAC0600MM-1.003FL1.5X Carbide Thread Mill Helical M6 1.00MM Metric TIALN 0.3740 9.50MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC0600MM-1.003FL1.5X Carbide Thread Mill Helical M6 1.00MM Metric TIALN 0.3740 9.50MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC0600MM-1.003FL1.5X

$105.58
Picture of GORILLA MILL GMTMAC0600MM-0.753FL2X Carbide Thread Mill Helical M6 0.75MM Metric TIALN 0.4870 12.37MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC0600MM-0.753FL2X Carbide Thread Mill Helical M6 0.75MM Metric TIALN 0.4870 12.37MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC0600MM-0.753FL2X

$105.58
Picture of GORILLA MILL GMTMAC0500MM-0.503FL2X Carbide Thread Mill Helical M5 0.50MM Metric TIALN 0.4040 10.26MM LOC 2.2441 57.00MM OAL

GORILLA MILL GMTMAC0500MM-0.503FL2X Carbide Thread Mill Helical M5 0.50MM Metric TIALN 0.4040 10.26MM LOC 2.2441 57.00MM OAL

ISO: GMTMAC0500MM-0.503FL2X

$105.58
Picture of GORILLA MILL GMAKD12CH3ZrN DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12CH3ZrN DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12CH3ZrN

$105.58
Picture of GORILLA MILL GMAKD12C3ZrN DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12C3ZrN DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12C3ZrN

$105.58
Picture of GORILLA MILL GMKD12CH5 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12CH5 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12CH5

$105.58
Picture of GORILLA MILL GMKD12CH4 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12CH4 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12CH4

$105.58
Picture of GORILLA MILL GMKD12C5 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12C5 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12C5

$105.58
Picture of GORILLA MILL GMKD12C4 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12C4 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12C4

$105.58
Picture of GORILLA MILL GMAKD12CH3 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12CH3 DIA 1/2" SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12CH3

$105.58
Picture of GORILLA MILL GMAKD12C3 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12C3 DIA 1/2" SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12C3

$105.58
Picture of ICE-ECO-0515625-4-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0515625-4-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$105.55
Picture of ICE-ECO-0515625-3-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0515625-3-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$105.55
Picture of ICE-ECO-0515625-2-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0515625-2-35-125-BN-RND-TiALN-R DIA 33/64 SH 0.4375 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$105.55
Picture of EMUGE BU219401.5043 Tap 1/4-28.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Coolant HSSE TiCN

EMUGE BU219401.5043 Tap 1/4-28.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Coolant HSSE TiCN

ISO: BU219401.5043

$105.55
Picture of AWARD T-809 DIA 1/2 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD T-809 DIA 1/2 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$105.55
Picture of ICE-ECO-05-4-6-15-BN-RND-TiALN-EL DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-05-4-6-15-BN-RND-TiALN-EL DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$105.48
Picture of ICE-ECO-05-2-6-15-BN-RND-TiALN-EL DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-05-2-6-15-BN-RND-TiALN-EL DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$105.48
Picture of AWARD BV-506-COTIN DIA 5/16 SH 0.7500 LOC 1.50 OAL 3.8750 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BV-506-COTIN DIA 5/16 SH 0.7500 LOC 1.50 OAL 3.8750 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$105.38
Picture of YG-1 61445 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 61445 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$105.31
Picture of REGAL 019586DS 1/2-14.00TPI Pipe Extra Long Pipe HSS Uncoated

REGAL 019586DS 1/2-14.00TPI Pipe Extra Long Pipe HSS Uncoated

$105.27
Picture of YG-1 EP20482F DIA 3/4 SH 0.7500 LOC 1.6250 OAL 6.2500 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 EP20482F DIA 3/4 SH 0.7500 LOC 1.6250 OAL 6.2500 End Mill Powder Metal TiAlN Single End Square Sharp ASP

$105.24
Picture of YG-1 EK10483 DIA 3/4 SH 0.7500 LOC 1.50 OAL 6.2500 End Mill Powder Metal Uncoated Single End Square Sharp ASP

YG-1 EK10483 DIA 3/4 SH 0.7500 LOC 1.50 OAL 6.2500 End Mill Powder Metal Uncoated Single End Square Sharp ASP

$105.23
Picture of AWARD O-316TIN DIA 3/16 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD O-316TIN DIA 3/16 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$105.23
Picture of ISCAR H3P 0587-IQ IC908 .587" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0587-IQ IC908 .587" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0587-IQ IC908

$105.17
Picture of ISCAR H3P 0583-IQ IC908 .583" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0583-IQ IC908 .583" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0583-IQ IC908

$105.17
Picture of ISCAR H3P 0567-IQ IC908 .567" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0567-IQ IC908 .567" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0567-IQ IC908

$105.17
Picture of ISCAR H3P 0555-IQ IC908 .555" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0555-IQ IC908 .555" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0555-IQ IC908

$105.17
Picture of ISCAR H3P 0547-IQ IC908 .547" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0547-IQ IC908 .547" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0547-IQ IC908

$105.17
Picture of ISCAR H3P 0539-IQ IC908 .539" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0539-IQ IC908 .539" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0539-IQ IC908

$105.17
Picture of ISCAR H3P 0535-IQ IC908 .535" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0535-IQ IC908 .535" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0535-IQ IC908

$105.17
Picture of ISCAR H3P 0528-IQ IC908 .528" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0528-IQ IC908 .528" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0528-IQ IC908

$105.17
Picture of ISCAR H3P 0520-IQ IC908 .520" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0520-IQ IC908 .520" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0520-IQ IC908

$105.17
Picture of ISCAR H3P 0579-IQ IC908 .579" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0579-IQ IC908 .579" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0579-IQ IC908

$105.17
Picture of ISCAR H3P 0575-IQ IC908 .575" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0575-IQ IC908 .575" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0575-IQ IC908

$105.17
Picture of ISCAR H3P 0571-IQ IC908 .571" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0571-IQ IC908 .571" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0571-IQ IC908

$105.17
Picture of ISCAR H3P 0563-IQ IC908 .563" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0563-IQ IC908 .563" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0563-IQ IC908

$105.17
Picture of ISCAR H3P 0559-IQ IC908 .559" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0559-IQ IC908 .559" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0559-IQ IC908

$105.17
Picture of ISCAR H3P 0551-IQ IC908 .551" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0551-IQ IC908 .551" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0551-IQ IC908

$105.17
Picture of ISCAR H3P 0543-IQ IC908 .543" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0543-IQ IC908 .543" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0543-IQ IC908

$105.17
Picture of ISCAR H3P 0531-IQ IC908 .531" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0531-IQ IC908 .531" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0531-IQ IC908

$105.17
Picture of ISCAR H3P 0524-IQ IC908 .524" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0524-IQ IC908 .524" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0524-IQ IC908

$105.17
Picture of ISCAR H3P 0516-IQ IC908 .516" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0516-IQ IC908 .516" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0516-IQ IC908

$105.17
Picture of ISCAR H3P 0512-IQ IC908 .512" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0512-IQ IC908 .512" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0512-IQ IC908

$105.17
Picture of YG-1 62422CN DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiN Single End Square Sharp General Purpose

YG-1 62422CN DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiN Single End Square Sharp General Purpose

$105.12
Picture of EMUGE 3440L.06015A DIA 1.50MM SH 0.2362 LOC 0.5906 OAL 2.677 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

EMUGE 3440L.06015A DIA 1.50MM SH 0.2362 LOC 0.5906 OAL 2.677 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

$105.08
Picture of AWARD 45-202-COTIN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD 45-202-COTIN DIA 1/8 SH 0.50 LOC 0.50 OAL 2.6250 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$105.06
Picture of Thread MILL USA TM50080 Carbide M5 x 0.80MM Metric 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM50080 Carbide M5 x 0.80MM Metric 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM50080

$105.00
Picture of Thread MILL USA TM45075 Carbide M4.5 x 0.75MM Metric 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM45075 Carbide M4.5 x 0.75MM Metric 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM45075

$105.00
Picture of Thread MILL USA TM40070 Carbide M4 x 0.70MM Metric 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM40070 Carbide M4 x 0.70MM Metric 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM40070

$105.00
Picture of Thread MILL USA TM30050 Carbide M3 x 0.50MM Metric 0.085 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM30050 Carbide M3 x 0.50MM Metric 0.085 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM30050

$105.00
Picture of Thread MILL USA TM19032 Carbide #10 x 32.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM19032 Carbide #10 x 32.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM19032

$105.00
Picture of Thread MILL USA TM19028 Carbide #10 x 28.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM19028 Carbide #10 x 28.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM19028

$105.00
Picture of Thread MILL USA TM19024 Carbide #10 x 24.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM19024 Carbide #10 x 24.00TPI UN 0.120 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM19024

$105.00
Picture of Thread MILL USA TM16436 Carbide #8 x 36.00TPI UN 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM16436 Carbide #8 x 36.00TPI UN 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM16436

$105.00
Picture of Thread MILL USA TM16432 Carbide #8 x 32.00TPI UN 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM16432 Carbide #8 x 32.00TPI UN 0.115 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM16432

$105.00
Picture of Thread MILL USA TM13832 Carbide #6 x 32.00TPI UN 0.100 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM13832 Carbide #6 x 32.00TPI UN 0.100 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM13832

$105.00
Picture of Thread MILL USA TM12544 Carbide #5 x 44.00TPI UN 0.095 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM12544 Carbide #5 x 44.00TPI UN 0.095 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM12544

$105.00
Picture of Thread MILL USA TM12540 Carbide #4 x 40.00TPI UN 0.085 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM12540 Carbide #4 x 40.00TPI UN 0.085 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM12540

$105.00
Picture of Thread MILL USA TM09948 Carbide #3 x 48.00TPI UN 0.075 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM09948 Carbide #3 x 48.00TPI UN 0.075 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM09948

$105.00
Picture of Thread MILL USA TM08656 Carbide #2 x 56.00TPI UN 0.065 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

Thread MILL USA TM08656 Carbide #2 x 56.00TPI UN 0.065 Cut Dia Cylindrical 0.1250 2.000 OAL TIALN

ISO: TM08656

$105.00
Picture of YG-1 E9991108TF DIA 1-1/8 SH 1.00 LOC 2.00 OAL 4.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

YG-1 E9991108TF DIA 1-1/8 SH 1.00 LOC 2.00 OAL 4.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

$104.95
Picture of AWARD M-420 DIA 1/4 SH 0.7500 LOC 5.00 OAL 7.3750 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M-420 DIA 1/4 SH 0.7500 LOC 5.00 OAL 7.3750 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$104.94
Picture of EMUGE CW193100.5782 Tap 1/16-27.00TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE TiN

EMUGE CW193100.5782 Tap 1/16-27.00TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE TiN

ISO: CW193100.5782

$104.91
Picture of AWARD BL-1013-COTIN DIA 5/8 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BL-1013-COTIN DIA 5/8 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$104.89
Picture of AWARD BT-258-CO DIA 5/32 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BT-258-CO DIA 5/32 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$104.89
Picture of AWARD T-258-COTIN DIA 5/32 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD T-258-COTIN DIA 5/32 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$104.89
Picture of INGERSOLL TPA1650R01-M2 IN2505 0.6496 (16.50 mm) Gold Twist Double Margin (M2) Replaceable Tip|Steel

INGERSOLL TPA1650R01-M2 IN2505 0.6496 (16.50 mm) Gold Twist Double Margin (M2) Replaceable Tip|Steel

ISO: TPA1650R01-M2 IN2505

$104.87
Picture of INGERSOLL TPA1926R01 IN2505 0.7583 (19.26 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1926R01 IN2505 0.7583 (19.26 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1926R01 IN2505

$104.87
Picture of INGERSOLL TPA1990R01 IN2505 0.7835 (19.90 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1990R01 IN2505 0.7835 (19.90 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1990R01 IN2505

$104.87
Picture of INGERSOLL TPA1980R01 IN2505 0.7795 (19.80 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1980R01 IN2505 0.7795 (19.80 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1980R01 IN2505

$104.87
Picture of INGERSOLL TPA1970R01 IN2505 0.7756 (19.70 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1970R01 IN2505 0.7756 (19.70 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1970R01 IN2505

$104.87
Picture of INGERSOLL TPA1960R01 IN2505 0.7717 (19.60 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1960R01 IN2505 0.7717 (19.60 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1960R01 IN2505

$104.87
Picture of INGERSOLL TPA1950R01 IN2505 0.7677 (19.50 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1950R01 IN2505 0.7677 (19.50 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1950R01 IN2505

$104.87
Picture of INGERSOLL TPA1940R01 IN2505 0.7638 (19.40 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1940R01 IN2505 0.7638 (19.40 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1940R01 IN2505

$104.87
Picture of INGERSOLL TPA1930R01 IN2505 0.7598 (19.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1930R01 IN2505 0.7598 (19.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1930R01 IN2505

$104.87
Picture of INGERSOLL TPA1920R01 IN2505 0.7559 (19.20 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1920R01 IN2505 0.7559 (19.20 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1920R01 IN2505

$104.87
Picture of INGERSOLL TPA1910R01 IN2505 0.7520 (19.10 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1910R01 IN2505 0.7520 (19.10 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1910R01 IN2505

$104.87
Picture of INGERSOLL TPA1905R01 IN2505 0.7500 (19.05 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1905R01 IN2505 0.7500 (19.05 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1905R01 IN2505

$104.87
Picture of INGERSOLL TPA1900R01 IN2505 0.7480 (19.00 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1900R01 IN2505 0.7480 (19.00 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1900R01 IN2505

$104.87
Picture of INGERSOLL TPA1890R01 IN2505 0.7441 (18.90 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1890R01 IN2505 0.7441 (18.90 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1890R01 IN2505

$104.87
Picture of INGERSOLL TPA1880R01 IN2505 0.7402 (18.80 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1880R01 IN2505 0.7402 (18.80 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1880R01 IN2505

$104.87
Picture of INGERSOLL TPA1870R01 IN2505 0.7362 (18.70 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1870R01 IN2505 0.7362 (18.70 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1870R01 IN2505

$104.87
Picture of INGERSOLL TPA1860R01 IN2505 0.7323 (18.60 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1860R01 IN2505 0.7323 (18.60 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1860R01 IN2505

$104.87
Picture of INGERSOLL TPA1850R01 IN2505 0.7283 (18.50 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1850R01 IN2505 0.7283 (18.50 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1850R01 IN2505

$104.87
Picture of INGERSOLL TPA1840R01 IN2505 0.7244 (18.40 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1840R01 IN2505 0.7244 (18.40 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1840R01 IN2505

$104.87
Picture of INGERSOLL TPA1830R01 IN2505 0.7205 (18.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1830R01 IN2505 0.7205 (18.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1830R01 IN2505

$104.87
Picture of INGERSOLL TPA1820R01 IN2505 0.7165 (18.20 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1820R01 IN2505 0.7165 (18.20 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1820R01 IN2505

$104.87
Picture of INGERSOLL TPA1810R01 IN2505 0.7126 (18.10 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

INGERSOLL TPA1810R01 IN2505 0.7126 (18.10 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera

ISO: TPA1810R01 IN2505

$104.87
Picture of ICE-PRO-0625-4-3-075-030-WLDN-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Black

ICE-PRO-0625-4-3-075-030-WLDN-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Black

$104.86
Picture of ICE-PRO-0625-4-3-075-SQ-WLDN-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Black

ICE-PRO-0625-4-3-075-SQ-WLDN-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Black

$104.86
Picture of ICE-PRO-0625-4-3-075-030-RND-TiALN-R DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Black

ICE-PRO-0625-4-3-075-030-RND-TiALN-R DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Black

$104.86
Picture of ICE-PRO-0625-4-3-075-SQ-RND-TiALN-R DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Black

ICE-PRO-0625-4-3-075-SQ-RND-TiALN-R DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Black

$104.86
Picture of IMCO 63952 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63952 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

$104.84
Picture of AWARD BL-1017TIN DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BL-1017TIN DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute HSS TiN Single End Ball Nose

$104.84
Picture of IMCO 64383 DIA 12MM SH 0.4724 LOC 1.4173 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

IMCO 64383 DIA 12MM SH 0.4724 LOC 1.4173 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

$104.82
Picture of IMCO 63411 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

IMCO 63411 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

$104.76
Picture of WIDIN ZF624122F DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-SUS-MATE

WIDIN ZF624122F DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-SUS-MATE

$104.68
Picture of EMUGE B1069101.0060 Tap Mod Bottom M6-1.00MM 6H Metric DIN/DIN Coolant HSSE TiCN

EMUGE B1069101.0060 Tap Mod Bottom M6-1.00MM 6H Metric DIN/DIN Coolant HSSE TiCN

ISO: B1069101.0060

$104.66
Picture of IMCO 67554 DIA 3/8 SH 0.3750 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Square Sharp Pow-R-Feed Mill

IMCO 67554 DIA 3/8 SH 0.3750 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Square Sharp Pow-R-Feed Mill

$104.64
Picture of REGAL 017858AS 1-3/8-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

REGAL 017858AS 1-3/8-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

$104.63
Picture of REGAL 017857AS 1-3/8-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

REGAL 017857AS 1-3/8-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

$104.63
Picture of REGAL 017856AS 1-3/8-8.00TPI Hand Tap Taper 7.0P-10.0P HSS Uncoated

REGAL 017856AS 1-3/8-8.00TPI Hand Tap Taper 7.0P-10.0P HSS Uncoated

$104.63
Picture of ICE-PER-075-4-3-1-030-WLDN-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Red

ICE-PER-075-4-3-1-030-WLDN-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Red

$104.57
Picture of ICE-PER-075-4-3-1-SQ-WLDN-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Red

ICE-PER-075-4-3-1-SQ-WLDN-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Red

$104.57
Picture of ICE-PER-075-4-3-1-030-RND-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Red

ICE-PER-075-4-3-1-030-RND-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Red

$104.57
Picture of ICE-PER-075-4-3-1-SQ-RND-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Red

ICE-PER-075-4-3-1-SQ-RND-TiALN-S DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp Red

$104.57
Picture of YG-1 DH424120 12.00MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424120 12.00MM Carbide Dream Drill (5XD) - Metric

$104.56
Picture of YG-1 DH424119 11.90MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424119 11.90MM Carbide Dream Drill (5XD) - Metric

$104.56
Picture of YG-1 DH424118 11.80MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424118 11.80MM Carbide Dream Drill (5XD) - Metric

$104.56
Picture of YG-1 DH424117 11.70MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424117 11.70MM Carbide Dream Drill (5XD) - Metric

$104.56
Picture of YG-1 DH424116 11.60MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424116 11.60MM Carbide Dream Drill (5XD) - Metric

$104.56
Picture of YG-1 DH424115 11.50MM Carbide Dream Drill (5XD) - Metric

YG-1 DH424115 11.50MM Carbide Dream Drill (5XD) - Metric

$104.56