Agricultural

Sort by
Picture of ISCAR ICM 0421 IC907 .421" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0421 IC907 .421" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0421 IC907

$82.75
Picture of ISCAR ICM 0437 IC907 .437" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0437 IC907 .437" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0437 IC907

$82.75
Picture of ISCAR ICM 0413 IC907 .413" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0413 IC907 .413" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0413 IC907

$82.75
Picture of ISCAR ICM 0394 IC907 .394" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0394 IC907 .394" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0394 IC907

$82.75
Picture of ISCAR ICM 0453 IC907 .453" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0453 IC907 .453" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0453 IC907

$82.75
Picture of ISCAR ICM 0433 IC907 .433" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0433 IC907 .433" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0433 IC907

$82.75
Picture of ISCAR FCP 0472 IC908 .472" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0472 IC908 .472" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0472 IC908

$82.75
Picture of ISCAR FCP 0453 IC908 .453" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0453 IC908 .453" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0453 IC908

$82.75
Picture of ISCAR FCP 0433 IC908 .433" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0433 IC908 .433" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0433 IC908

$82.75
Picture of ISCAR FCP 0413 IC908 .413" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0413 IC908 .413" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0413 IC908

$82.75
Picture of ISCAR FCP 0394 IC908 .394" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0394 IC908 .394" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0394 IC908

$82.75
Picture of ISCAR ICM 0417 IC908 .417" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0417 IC908 .417" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0417 IC908

$82.75
Picture of ISCAR ICM 0425 IC908 .425" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0425 IC908 .425" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0425 IC908

$82.75
Picture of ISCAR ICM 0421 IC908 .421" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0421 IC908 .421" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0421 IC908

$82.75
Picture of ISCAR ICM 0409 IC908 .409" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0409 IC908 .409" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0409 IC908

$82.75
Picture of ISCAR ICM 0406 IC908 .406" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0406 IC908 .406" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0406 IC908

$82.75
Picture of ISCAR ICM 0402 IC908 .402" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0402 IC908 .402" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0402 IC908

$82.75
Picture of ISCAR ICM 0398 IC908 .398" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0398 IC908 .398" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0398 IC908

$82.75
Picture of ISCAR ICM 0390 IC908 .390" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0390 IC908 .390" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0390 IC908

$82.75
Picture of ISCAR ICM 0386 IC908 .386" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0386 IC908 .386" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0386 IC908

$82.75
Picture of ISCAR ICM 0382 IC908 .382" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0382 IC908 .382" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0382 IC908

$82.75
Picture of ISCAR ICM 0378 IC908 .378" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0378 IC908 .378" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0378 IC908

$82.75
Picture of ISCAR ICM 0469 IC908 .469" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0469 IC908 .469" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0469 IC908

$82.75
Picture of ISCAR ICM 0465 IC908 .465" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0465 IC908 .465" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0465 IC908

$82.75
Picture of ISCAR ICM 0461 IC908 .461" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0461 IC908 .461" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0461 IC908

$82.75
Picture of ISCAR ICM 0457 IC908 .457" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0457 IC908 .457" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0457 IC908

$82.75
Picture of ISCAR ICM 0453 IC908 .453" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0453 IC908 .453" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0453 IC908

$82.75
Picture of ISCAR ICM 0449 IC908 .449" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0449 IC908 .449" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0449 IC908

$82.75
Picture of ISCAR ICM 0445 IC908 .445" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0445 IC908 .445" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0445 IC908

$82.75
Picture of ISCAR ICM 0441 IC908 .441" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0441 IC908 .441" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0441 IC908

$82.75
Picture of ISCAR ICM 0437 IC908 .437" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0437 IC908 .437" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0437 IC908

$82.75
Picture of ISCAR ICM 0433 IC908 .433" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0433 IC908 .433" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0433 IC908

$82.75
Picture of ISCAR ICM 0472 IC907 .472" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0472 IC907 .472" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0472 IC907

$82.75
Picture of ISCAR ICM 0472 IC908 .472" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0472 IC908 .472" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0472 IC908

$82.75
Picture of ISCAR ICM 0429 IC908 .429" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0429 IC908 .429" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0429 IC908

$82.75
Picture of ISCAR ICM 0413 IC908 .413" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0413 IC908 .413" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0413 IC908

$82.75
Picture of ISCAR ICM 0394 IC908 .394" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0394 IC908 .394" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0394 IC908

$82.75
Picture of ISCAR ECPI-H7 250-1.5C250CF-3.5 IC902 DIA 1/4 SH 0.2500 LOC 1.50 OAL 3.50 End Mill Carbide TiAlN Single End 45.0° Chamfer CHATTERFREE

ISCAR ECPI-H7 250-1.5C250CF-3.5 IC902 DIA 1/4 SH 0.2500 LOC 1.50 OAL 3.50 End Mill Carbide TiAlN Single End 45.0° Chamfer CHATTERFREE

$82.75
Picture of AWARD KX-609-CBTIALN DIA 3/8 SH 0.50 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD KX-609-CBTIALN DIA 3/8 SH 0.50 LOC 2.2500 OAL 5.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$82.74
Picture of AWARD BT-404-CB DIA 1/4 SH 0.6250 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BT-404-CB DIA 1/4 SH 0.6250 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$82.63
Picture of YG-1 73435 DIA 1-1/8 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 73435 DIA 1-1/8 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$82.60
Picture of YG-1 73431 DIA 1-1/8 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 73431 DIA 1-1/8 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$82.60
Picture of LMT FETTE 1401390 3/8-24.00TPI Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401390 3/8-24.00TPI Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

$82.60
Picture of GORILLA MILL GMAKD1000MMCS3ZrN DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD1000MMCS3ZrN DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD1000MMCS3ZrN

$82.57
Picture of GORILLA MILL GMKD1000MMCS5 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD1000MMCS5 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD1000MMCS5

$82.57
Picture of GORILLA MILL GMKD1000MMCS4 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD1000MMCS4 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD1000MMCS4

$82.57
Picture of GORILLA MILL GMAKD1000MMCS3 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD1000MMCS3 DIA 10MM SH 0.3937 LOC 0.6299 OAL 1.9685 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD1000MMCS3

$82.57
Picture of GORILLA MILL GM14FSL5 DIA 1/4" SH 0.2500 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GM14FSL5 DIA 1/4" SH 0.2500 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GM14FSL5

$82.57
Picture of GORILLA MILL GM14FSL4 DIA 1/4" SH 0.2500 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GM14FSL4 DIA 1/4" SH 0.2500 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GM14FSL4

$82.57
Picture of IMCO 63152 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

IMCO 63152 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

$82.55
Picture of ICE-PER-04375-4-4-2-BN-WLDN-TiALN-L DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

ICE-PER-04375-4-4-2-BN-WLDN-TiALN-L DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

$82.55
Picture of ICE-PER-04375-4-4-2-BN-RND-TiALN-L DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

ICE-PER-04375-4-4-2-BN-RND-TiALN-L DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

$82.55
Picture of AWARD BL-1009-CO DIA 5/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BL-1009-CO DIA 5/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$82.50
Picture of AWARD L-1017-CO DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-1017-CO DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$82.50
Picture of AWARD L-1009-COTIN DIA 5/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD L-1009-COTIN DIA 5/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$82.50
Picture of IMCO 63513 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM Pow-R-Path Mill

IMCO 63513 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM Pow-R-Path Mill

$82.49
Picture of EMUGE BU459600.5711 Tap No.10-32.00TPI Mod Bottom LK-UNF DINSI 2.0P-3.0P Cobalt HSSE TiCN

EMUGE BU459600.5711 Tap No.10-32.00TPI Mod Bottom LK-UNF DINSI 2.0P-3.0P Cobalt HSSE TiCN

ISO: BU459600.5711

$82.48
Picture of YG-1 60394CC DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Cobalt TiCN Single End Square Sharp General Purpose

YG-1 60394CC DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Cobalt TiCN Single End Square Sharp General Purpose

$82.41
Picture of VIKING 16722 1" Annular Drill 2 Length Of Cut Gold Coated

VIKING 16722 1" Annular Drill 2 Length Of Cut Gold Coated

$82.34
Picture of VIKING 16461 1-3/8 Annular Drill 1 Length Of Cut Gold Coated

VIKING 16461 1-3/8 Annular Drill 1 Length Of Cut Gold Coated

$82.34
Picture of AWARD P-406-CBTIALN DIA 1/4 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD P-406-CBTIALN DIA 1/4 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$82.31
Picture of LMT FETTE 1400165 M12-1.00MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1400165 M12-1.00MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$82.30
Picture of AWARD TL-204-CB DIA 1/8 SH 0.5625 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD TL-204-CB DIA 1/8 SH 0.5625 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

$82.30
Picture of AWARD R-405-CBTIALN DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD R-405-CBTIALN DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$82.30
Picture of AWARD O-210-CB DIA 1/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD O-210-CB DIA 1/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

$82.25
Picture of WIDIN ZF624102 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Carbide AlTiN Single End Square Sharp Z-SUS-MATE

WIDIN ZF624102 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Carbide AlTiN Single End Square Sharp Z-SUS-MATE

$82.24
Picture of EMUGE 3444L.08003A DIA 3MM SH 0.3937 LOC 0.2362 OAL 3.1496 End Mill Taper Flute Carbide AlCrN Single End Corner Radius 0.0118 0.30MM Turbine Program

EMUGE 3444L.08003A DIA 3MM SH 0.3937 LOC 0.2362 OAL 3.1496 End Mill Taper Flute Carbide AlCrN Single End Corner Radius 0.0118 0.30MM Turbine Program

$82.22
Picture of EMUGE 3443.06015A DIA 1.50MM SH 0.3150 LOC 0.1575 OAL 2.480 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3443.06015A DIA 1.50MM SH 0.3150 LOC 0.1575 OAL 2.480 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

$82.22
Picture of AWARD W-504TIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD W-504TIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$82.20
Picture of AWARD BO-609-COTIN DIA 3/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BO-609-COTIN DIA 3/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$82.20
Picture of YG-1 69337 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 69337 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Roughing Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

$82.16
Picture of TUNGALOY TEFS080E44-18W08CF-63 AH725 DIA 8MM SH 0.3150 LOC 0.7087 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TEFS080E44-18W08CF-63 AH725 DIA 8MM SH 0.3150 LOC 0.7087 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

$82.16
Picture of TUNGALOY TEFS080E44-18C08CF63 AH725 DIA 8MM SH 0.3150 LOC 0.7087 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TEFS080E44-18C08CF63 AH725 DIA 8MM SH 0.3150 LOC 0.7087 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

$82.16
Picture of AWARD BL-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BL-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

$82.14
Picture of AWARD M-413-COTIN DIA 1/4 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD M-413-COTIN DIA 1/4 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$82.14
Picture of AWARD M-413A-COTIN DIA 1/4 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD M-413A-COTIN DIA 1/4 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$82.14
Picture of AWARD BW-304-CO DIA 3/16 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BW-304-CO DIA 3/16 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$82.14
Picture of AWARD W-304-COTIN DIA 3/16 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD W-304-COTIN DIA 3/16 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$82.14
Picture of AWARD T-309 DIA 3/16 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD T-309 DIA 3/16 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$82.14
Picture of AWARD BM-413-CO DIA 1/4 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BM-413-CO DIA 1/4 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$82.14
Picture of AWARD BM-413A-CO DIA 1/4 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BM-413A-CO DIA 1/4 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$82.14
Picture of LMT FETTE 9116554 3/8-24.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 9116554 3/8-24.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$82.13
Picture of INGERSOLL 46D-5033T8RN01 IN05S DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Carbide Uncoated Single End Corner Radius 0.0080 0.20MM CHIPSURFER

INGERSOLL 46D-5033T8RN01 IN05S DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Carbide Uncoated Single End Corner Radius 0.0080 0.20MM CHIPSURFER

$82.13
Picture of EMUGE BU37Q200.5044 Tap 5/16-24.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Carbide HSSE-Powder Metal TiCN

EMUGE BU37Q200.5044 Tap 5/16-24.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Carbide HSSE-Powder Metal TiCN

ISO: BU37Q200.5044

$82.12
Picture of YG-1 60394CF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 60394CF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

$82.09
Picture of ICE-ECO-0625-4-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0625-4-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$82.07
Picture of ICE-ECO-0625-3-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0625-3-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$82.07
Picture of ICE-ECO-0625-2-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0625-2-3-075-BN-RND-TiALN-S DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$82.07
Picture of LMT FETTE 1401055 9/16-12.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401055 9/16-12.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$82.05
Picture of TUNGALOY VGC056L43R016-U02S08 AH725 DIA 9/16 SH T08 LOC 0.4600 OAL 0.5900 Counter Bore,Replacable Head Carbide TiAlN Single End Counter Bore0.0160 0.41MM TUNG MEISTER

TUNGALOY VGC056L43R016-U02S08 AH725 DIA 9/16 SH T08 LOC 0.4600 OAL 0.5900 Counter Bore,Replacable Head Carbide TiAlN Single End Counter Bore0.0160 0.41MM TUNG MEISTER

$82.04
Picture of AWARD R-609-CO DIA 3/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD R-609-CO DIA 3/8 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$82.03
Picture of ISCAR MM SS22M150Z1720-4T08 IC528 DIA 0.845 SH T08 OAL 0.5310 Chamfer Mill,Replacable Head Carbide TiCN + TiN Single End Cham Mill MULTI-MASTER

ISCAR MM SS22M150Z1720-4T08 IC528 DIA 0.845 SH T08 OAL 0.5310 Chamfer Mill,Replacable Head Carbide TiCN + TiN Single End Cham Mill MULTI-MASTER

$81.97
Picture of ISCAR MM EDF094-090-76-3T05 IC908 DIA 3/8 SH T05 LOC 0.1850 OAL 0.7720 Chamfer Mill,Replacable Head Carbide TiAlN Single End Cham Mill MULTI-MASTER

ISCAR MM EDF094-090-76-3T05 IC908 DIA 3/8 SH T05 LOC 0.1850 OAL 0.7720 Chamfer Mill,Replacable Head Carbide TiAlN Single End Cham Mill MULTI-MASTER

$81.97
Picture of ISCAR EPNDI-C10 500-1.0C500F3.5 IC02 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.50 End Mill Carbide Uncoated Single End Square Sharp SolidMill

ISCAR EPNDI-C10 500-1.0C500F3.5 IC02 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.50 End Mill Carbide Uncoated Single End Square Sharp SolidMill

$81.97
Picture of ISCAR MM HC.562C43R016-2T08 IC908 DIA 9/16 SH T08 LOC 0.4600 OAL 0.9030Screw On Head Carbide TiAlN Single End Drill Point0.0100 0.25MM MULTI-MASTER

ISCAR MM HC.562C43R016-2T08 IC908 DIA 9/16 SH T08 LOC 0.4600 OAL 0.9030Screw On Head Carbide TiAlN Single End Drill Point0.0100 0.25MM MULTI-MASTER

$81.97
Picture of ISCAR ICP 0587 IC908 .587" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0587 IC908 .587" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0587 IC908

$81.97
Picture of ISCAR ICP 0583 IC908 .583" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0583 IC908 .583" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0583 IC908

$81.97
Picture of ISCAR ICP 0579 IC908 .579" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0579 IC908 .579" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0579 IC908

$81.97
Picture of ISCAR ICP 0575 IC908 .575" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0575 IC908 .575" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0575 IC908

$81.97
Picture of ISCAR ICP 0571 IC908 .571" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0571 IC908 .571" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0571 IC908

$81.97
Picture of ISCAR ICP 0567 IC908 .567" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0567 IC908 .567" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0567 IC908

$81.97
Picture of ISCAR ICP 0563 IC908 .563" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0563 IC908 .563" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0563 IC908

$81.97
Picture of ISCAR ICP 0559 IC908 .559" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0559 IC908 .559" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0559 IC908

$81.97
Picture of ISCAR ICP 0555 IC908 .555" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0555 IC908 .555" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0555 IC908

$81.97
Picture of ISCAR ICP 0551 IC908 .551" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0551 IC908 .551" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0551 IC908

$81.97
Picture of ISCAR ICP 0547 IC908 .547" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0547 IC908 .547" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0547 IC908

$81.97
Picture of ISCAR ICP 0543 IC908 .543" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0543 IC908 .543" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0543 IC908

$81.97
Picture of ISCAR ICP 0539 IC908 .539" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0539 IC908 .539" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0539 IC908

$81.97
Picture of ISCAR ICP 0535 IC908 .535" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0535 IC908 .535" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0535 IC908

$81.97
Picture of ISCAR ICP 0531 IC908 .531" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0531 IC908 .531" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0531 IC908

$81.97
Picture of ISCAR ICP 0528 IC908 .528" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0528 IC908 .528" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0528 IC908

$81.97
Picture of ISCAR ICP 0524 IC908 .524" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0524 IC908 .524" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0524 IC908

$81.97
Picture of ISCAR ICP 0520 IC908 .520" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0520 IC908 .520" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0520 IC908

$81.97
Picture of ISCAR ICP 0516 IC908 .516" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0516 IC908 .516" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0516 IC908

$81.97
Picture of ISCAR ICP 0512 IC908 .512" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0512 IC908 .512" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0512 IC908

$81.97
Picture of ISCAR ICP 0504 IC908 .504" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0504 IC908 .504" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0504 IC908

$81.97
Picture of ISCAR ICP 0488 IC908 .488" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0488 IC908 .488" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0488 IC908

$81.97
Picture of ISCAR ICP 0484 IC908 .484" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0484 IC908 .484" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0484 IC908

$81.97
Picture of ISCAR ICP 0480 IC908 .480" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0480 IC908 .480" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0480 IC908

$81.97
Picture of ISCAR ICP 0476 IC908 .476" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0476 IC908 .476" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0476 IC908

$81.97
Picture of ISCAR ICP 0496 IC908 .496" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0496 IC908 .496" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0496 IC908

$81.97
Picture of ISCAR ICP 0500 IC908 .500" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0500 IC908 .500" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0500 IC908

$81.97
Picture of ISCAR ICP 0508 IC908 .508" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0508 IC908 .508" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0508 IC908

$81.97
Picture of ISCAR ICP 0492 IC908 .492" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0492 IC908 .492" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0492 IC908

$81.97
Picture of AWARD BP-805-COTIN DIA 1/2 SH 0.7500 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BP-805-COTIN DIA 1/2 SH 0.7500 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.96
Picture of AWARD BV-504-COTIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BV-504-COTIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.82
Picture of YG-1 DH404110 11.00MM Carbide Dream Drill (3XD) - Metric

YG-1 DH404110 11.00MM Carbide Dream Drill (3XD) - Metric

$81.77
Picture of AWARD BO-310-COTIN DIA 3/16 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BO-310-COTIN DIA 3/16 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.77
Picture of AWARD BO-310A-COTIN DIA 3/16 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BO-310A-COTIN DIA 3/16 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.77
Picture of WIDIN WROU510A016-2.5E 1/2 Dia Carbide 10 Fl Single End ROUGHER End Mill Carbide Diamond Single End Square Sharp Z-GRA-MATE

WIDIN WROU510A016-2.5E 1/2 Dia Carbide 10 Fl Single End ROUGHER End Mill Carbide Diamond Single End Square Sharp Z-GRA-MATE

$81.67
Picture of LMT FETTE 1401161 9/16-18.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401161 9/16-18.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$81.67
Picture of AWARD KX-806-CB DIA 1/2 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD KX-806-CB DIA 1/2 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

$81.66
Picture of AWARD BW-204TIN DIA 1/8 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BW-204TIN DIA 1/8 SH 0.50 LOC 1.00 OAL 3.1250 End Mill Taper Flute HSS TiN Single End Ball Nose

$81.66
Picture of AWARD BW-204CTIN DIA 1/8 SH 0.7500 LOC 1.00 OAL 3.3750 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BW-204CTIN DIA 1/8 SH 0.7500 LOC 1.00 OAL 3.3750 End Mill Taper Flute HSS TiN Single End Ball Nose

$81.66
Picture of AWARD T-404-CBTIALN DIA 1/4 SH 0.6250 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD T-404-CBTIALN DIA 1/4 SH 0.6250 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$81.66
Picture of IMCO 67755 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

IMCO 67755 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

$81.64
Picture of IMCO 30572 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Omega-6 Mill

IMCO 30572 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Carbide TiAlN Single End Corner Radius 0.0300 0.76MM Omega-6 Mill

$81.64
Picture of YG-1 62426 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 62426 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$81.63
Picture of REGAL 017855AS 1-1/4-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

REGAL 017855AS 1-1/4-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

$81.63
Picture of REGAL 017854AS 1-1/4-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

REGAL 017854AS 1-1/4-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

$81.63
Picture of REGAL 017853AS 1-1/4-8.00TPI Hand Tap Taper 1.0P-2.0P HSS Uncoated

REGAL 017853AS 1-1/4-8.00TPI Hand Tap Taper 1.0P-2.0P HSS Uncoated

$81.63
Picture of AWARD N-313TIN DIA 3/16 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD N-313TIN DIA 3/16 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute HSS TiN Single End Square Sharp

$81.60
Picture of AWARD BKX-1017 DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BKX-1017 DIA 5/8 SH 0.7500 LOC 4.2500 OAL 6.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

$81.54
Picture of IMCO 63403 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM Pow-R-Feed Mill

IMCO 63403 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM Pow-R-Feed Mill

$81.53
Picture of AWARD BTL-406-COTIN DIA 1/4 SH 0.6250 LOC 1.50 OAL 3.6250 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BTL-406-COTIN DIA 1/4 SH 0.6250 LOC 1.50 OAL 3.6250 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.48
Picture of AWARD BO-312TIN DIA 3/16 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BO-312TIN DIA 3/16 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

$81.48
Picture of AWARD BO-312ATIN DIA 3/16 SH 0.50 LOC 3.00 OAL 5.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BO-312ATIN DIA 3/16 SH 0.50 LOC 3.00 OAL 5.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

$81.48
Picture of AWARD BM-613A DIA 3/8 SH 0.7500 LOC 3.2500 OAL 5.3750 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BM-613A DIA 3/8 SH 0.7500 LOC 3.2500 OAL 5.3750 End Mill Taper Flute HSS Uncoated Single End Ball Nose

$81.48
Picture of AWARD BM-613 DIA 3/8 SH 0.6250 LOC 3.2500 OAL 5.3750 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BM-613 DIA 3/8 SH 0.6250 LOC 3.2500 OAL 5.3750 End Mill Taper Flute HSS Uncoated Single End Ball Nose

$81.48
Picture of LMT FETTE 1402561 M14-2.00MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1402561 M14-2.00MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

$81.42
Picture of INGERSOLL 45B12009T8RB17 IN2005 DIA 12MM SH T08 LOC 0.4724End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

INGERSOLL 45B12009T8RB17 IN2005 DIA 12MM SH T08 LOC 0.4724End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

$81.40
Picture of INGERSOLL 47C-3727T6RN01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Carbide TiAlN Single End Corner Radius 0.0130 0.33MM CHIPSURFER

INGERSOLL 47C-3727T6RN01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Carbide TiAlN Single End Corner Radius 0.0130 0.33MM CHIPSURFER

$81.40
Picture of INGERSOLL 47C-3727T6RQ01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End 45.0° Chamfer CHIPSURFER

INGERSOLL 47C-3727T6RQ01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End 45.0° Chamfer CHIPSURFER

$81.40
Picture of INGERSOLL 47D-3727T6RQ03 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM CHIPSURFER

INGERSOLL 47D-3727T6RQ03 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM CHIPSURFER

$81.40
Picture of INGERSOLL 47D-3727T6RQ01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM CHIPSURFER

INGERSOLL 47D-3727T6RQ01 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM CHIPSURFER

$81.40
Picture of INGERSOLL 47J-3727T6RQ05 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp CHIPSURFER

INGERSOLL 47J-3727T6RQ05 IN2005 DIA 3/8 SH T06 LOC 0.3750End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp CHIPSURFER

$81.40
Picture of INGERSOLL 45B-5037T8RB06 IN2005 DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

INGERSOLL 45B-5037T8RB06 IN2005 DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

$81.40
Picture of AWARD BL-613-COTIN DIA 3/8 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BL-613-COTIN DIA 3/8 SH 0.50 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.40
Picture of AWARD BL-613B-COTIN DIA 3/8 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BL-613B-COTIN DIA 3/8 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt TiN Single End Ball Nose

$81.40
Picture of YG-1 65359CF DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 65359CF DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

$81.39
Picture of YG-1 65359CC DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Cobalt TiCN Single End Square Sharp General Purpose

YG-1 65359CC DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Cobalt TiCN Single End Square Sharp General Purpose

$81.39
Picture of EMUGE BU51C400.5656 Tap No.4-40.00TPI Bottoming LK-UNC DINSI 1.5P-2.0P HSS HSSE GLT-1

EMUGE BU51C400.5656 Tap No.4-40.00TPI Bottoming LK-UNC DINSI 1.5P-2.0P HSS HSSE GLT-1

ISO: BU51C400.5656

$81.37
Picture of GORILLA MILL GMHX1000MMCL4 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Carbide TiAlN Single End 45.0° Chamfer SASQUATCH

GORILLA MILL GMHX1000MMCL4 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Carbide TiAlN Single End 45.0° Chamfer SASQUATCH

ISO: GMHX1000MMCL4

$81.31
Picture of AWARD M-616 DIA 3/8 SH 0.7500 LOC 4.00 OAL 6.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M-616 DIA 3/8 SH 0.7500 LOC 4.00 OAL 6.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$81.28
Picture of AWARD BK-805-CB DIA 1/2 SH 0.5625 LOC 1.2500 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BK-805-CB DIA 1/2 SH 0.5625 LOC 1.2500 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$81.28
Picture of ICE-PER-03125-4-4-04375-BN-RND-TiALN-N DIA 5/16 SH 0.3125 LOC 0.4375 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

ICE-PER-03125-4-4-04375-BN-RND-TiALN-N DIA 5/16 SH 0.3125 LOC 0.4375 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose Red

$81.25
Picture of AWARD BL-605-CBTIALN DIA 3/8 SH 0.50 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BL-605-CBTIALN DIA 3/8 SH 0.50 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

$81.23
Picture of AWARD BT-205-CB DIA 1/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BT-205-CB DIA 1/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$81.23
Picture of AWARD BT-106-CB DIA 3/32 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BT-106-CB DIA 3/32 SH 0.6250 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$81.23
Picture of AWARD BR-405-CB DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BR-405-CB DIA 1/4 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$81.23
Picture of AWARD BO-413 DIA 1/4 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BO-413 DIA 1/4 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

$81.23
Picture of IMCO 64376 DIA 10MM SH 0.3937 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

IMCO 64376 DIA 10MM SH 0.3937 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

$81.22
Picture of IMCO 63947 DIA 3/8 SH 0.3750 LOC 1.3125 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63947 DIA 3/8 SH 0.3750 LOC 1.3125 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

$81.22
Picture of ISCAR ECI-E4 375-75/1.25C37CFS IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer CHATTERFREE

ISCAR ECI-E4 375-75/1.25C37CFS IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer CHATTERFREE

$81.20
Picture of ISCAR MM EFS.312B20-4T05 IC908 DIA 5/16 SH T05 LOC 0.20 OAL 0.6730Screw On Head Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

ISCAR MM EFS.312B20-4T05 IC908 DIA 5/16 SH T05 LOC 0.20 OAL 0.6730Screw On Head Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

$81.20
Picture of ISCAR ICK 0272-2M IC908 .272" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0272-2M IC908 .272" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0272-2M IC908

$81.20
Picture of ISCAR ICK 0267-2M IC908 .267" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0267-2M IC908 .267" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0267-2M IC908

$81.20
Picture of ISCAR ICK 0263-2M IC908 .263" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0263-2M IC908 .263" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0263-2M IC908

$81.20
Picture of ISCAR ICK 0259-2M IC908 .259" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0259-2M IC908 .259" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0259-2M IC908

$81.20
Picture of ISCAR ICK 0256-2M IC908 .256" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0256-2M IC908 .256" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0256-2M IC908

$81.20
Picture of ISCAR ICK 0252-2M IC908 .252" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0252-2M IC908 .252" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0252-2M IC908

$81.20
Picture of ISCAR ICK 0250-2M IC908 .250" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0250-2M IC908 .250" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0250-2M IC908

$81.20
Picture of ISCAR ICK 0248-2M IC908 .248" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0248-2M IC908 .248" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0248-2M IC908

$81.20
Picture of ISCAR ICK 0244-2M IC908 .244" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0244-2M IC908 .244" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0244-2M IC908

$81.20
Picture of ISCAR ICK 0240-2M IC908 .240" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0240-2M IC908 .240" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0240-2M IC908

$81.20
Picture of ISCAR ICK 0236-2M IC908 .236" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0236-2M IC908 .236" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0236-2M IC908

$81.20
Picture of ISCAR ICK 0311-2M IC908 .311" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0311-2M IC908 .311" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0311-2M IC908

$81.20
Picture of ISCAR ICK 0303-2M IC908 .303" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0303-2M IC908 .303" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0303-2M IC908

$81.20
Picture of ISCAR ICK 0299-2M IC908 .299" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0299-2M IC908 .299" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0299-2M IC908

$81.20
Picture of ISCAR ICK 0291-2M IC908 .291" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0291-2M IC908 .291" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0291-2M IC908

$81.20
Picture of ISCAR ICK 0287-2M IC908 .287" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0287-2M IC908 .287" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0287-2M IC908

$81.20
Picture of ISCAR ICK 0275-2M IC908 .275" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0275-2M IC908 .275" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0275-2M IC908

$81.20
Picture of ISCAR ICK 0370-2M IC908 .370" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0370-2M IC908 .370" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0370-2M IC908

$81.20
Picture of ISCAR ICK 0374-2M IC908 .374" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0374-2M IC908 .374" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0374-2M IC908

$81.20
Picture of ISCAR ICK 0366-2M IC908 .366" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0366-2M IC908 .366" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0366-2M IC908

$81.20
Picture of ISCAR ICK 0354-2M IC908 .354" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0354-2M IC908 .354" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0354-2M IC908

$81.20
Picture of ISCAR ICK 0350-2M IC908 .350" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0350-2M IC908 .350" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0350-2M IC908

$81.20
Picture of ISCAR ICK 0346-2M IC908 .346" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0346-2M IC908 .346" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0346-2M IC908

$81.20
Picture of ISCAR ICK 0339-2M IC908 .339" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0339-2M IC908 .339" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0339-2M IC908

$81.20
Picture of ISCAR ICK 0335-2M IC908 .335" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0335-2M IC908 .335" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0335-2M IC908

$81.20