Standard Helix

Sort by
Picture of HARVEY Tool 36917-C6 .039 BALL x 3 DEG x .375 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36917-C6 .039 BALL x 3 DEG x .375 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$77.10
Picture of HARVEY Tool 36921-C6 .039 BALL x 3 DEG x 1.448 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36921-C6 .039 BALL x 3 DEG x 1.448 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$77.10
Picture of HARVEY Tool 36916-C6 .031 BALL x 3 DEG x .312 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36916-C6 .031 BALL x 3 DEG x .312 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$77.10
Picture of HARVEY Tool 21845 .045 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21845 .045 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$77.10
Picture of HARVEY Tool 36910-C6 .025 BALL x 3 DEG x .250 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36910-C6 .025 BALL x 3 DEG x .250 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$77.10
Picture of HARVEY Tool 21545 .045 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21545 .045 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$77.10
Picture of HARVEY Tool 21945 .045 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21945 .045 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$77.10
Picture of HARVEY Tool 21645 .045 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21645 .045 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$77.10
Picture of ROBBJACK SB-301-12-DLC DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK SB-301-12-DLC DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$77.00
Picture of ROBBJACK SB-201-12-DLC DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK SB-201-12-DLC DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$77.00
Picture of M.A. FORD 156M1000N30A DIA 10MM SH 0.3937 LOC 0.2559 OAL 4.0157 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

M.A. FORD 156M1000N30A DIA 10MM SH 0.3937 LOC 0.2559 OAL 4.0157 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

$76.99
Picture of YG-1 44394 DIA 7/8 SH 0.8750 LOC 3.50 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 44394 DIA 7/8 SH 0.8750 LOC 3.50 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

$76.96
Picture of YG-1 48593 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose Carbide End Mill

YG-1 48593 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose Carbide End Mill

$76.92
Picture of ROBBJACK SB-201-14 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK SB-201-14 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$76.85
Picture of ROBBJACK SB-301-14 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK SB-301-14 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$76.85
Picture of HTC 143-4515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-4515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$76.84
Picture of HTC 143-3515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-3515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$76.84
Picture of HTC 143-2515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-2515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$76.84
Picture of YG-1 44337CE DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

YG-1 44337CE DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

$76.84
Picture of YG-1 43350CE DIA 11/16 SH 0.6250 LOC 1.6250 OAL 2.50 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

YG-1 43350CE DIA 11/16 SH 0.6250 LOC 1.6250 OAL 2.50 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

$76.83
Picture of M.A. FORD 14050000TW DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose TuffCut® GP

M.A. FORD 14050000TW DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose TuffCut® GP

$76.83
Picture of HTC 179-2506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 179-2506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$76.79
Picture of HTC 179-4506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 179-4506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$76.79
Picture of EMUGE 1877A.00106 DIA 1MM SH 0.2362 LOC 0.1575 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1877A.00106 DIA 1MM SH 0.2362 LOC 0.1575 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$76.77
Picture of MELIN 12878 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

MELIN 12878 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

$76.76
Picture of YG-1 SEM846015406S DIA 1.50MM SH 0.2362 LOC 0.0591 OAL 3.149 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM846015406S DIA 1.50MM SH 0.2362 LOC 0.0591 OAL 3.149 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$76.76
Picture of WIDIN DB522090 DIA 9MM SH 0.3937 LOC 0.5906 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB522090 DIA 9MM SH 0.3937 LOC 0.5906 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$76.75
Picture of WIDIN DB522100 DIA 10MM SH 0.3937 LOC 0.5906 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB522100 DIA 10MM SH 0.3937 LOC 0.5906 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$76.75
Picture of HARVEY Tool 36907-C6 .020 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36907-C6 .020 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.70
Picture of HARVEY Tool 36904-C6 .020 BALL x 3 DEG x .250 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36904-C6 .020 BALL x 3 DEG x .250 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.70
Picture of EMUGE 1921R.0125 DIA 1/8 SH 0.2500 LOC 0.1562 OAL 2.2500 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

EMUGE 1921R.0125 DIA 1/8 SH 0.2500 LOC 0.1562 OAL 2.2500 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

$76.65
Picture of EMUGE 1921R.009375 DIA 3/32 SH 0.2500 LOC 0.1250 OAL 2.2500 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

EMUGE 1921R.009375 DIA 3/32 SH 0.2500 LOC 0.1250 OAL 2.2500 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

$76.65
Picture of HARVEY Tool 59493-C3 .093 BALL Carbide STB FL 20x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 59493-C3 .093 BALL Carbide STB FL 20x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.40
Picture of HARVEY Tool 36919-C6 .039 BALL x 3 DEG x .750 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36919-C6 .039 BALL x 3 DEG x .750 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.40
Picture of HARVEY Tool 36913-C6 .025 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36913-C6 .025 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.40
Picture of HARVEY Tool 33516-C4 .250 BALL Carbide STB FL 5x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 33516-C4 .250 BALL Carbide STB FL 5x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$76.40
Picture of YG-1 47593TN DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Double End Ball Nose Carbide End Mill

YG-1 47593TN DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Double End Ball Nose Carbide End Mill

$76.33
Picture of HARVEY Tool 38762-C6 .062 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38762-C6 .062 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of HARVEY Tool 38793-C6 .093 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38793-C6 .093 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of HARVEY Tool 38731-C6 .031 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38731-C6 .031 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of HARVEY Tool 38747-C6 .047 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38747-C6 .047 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of HARVEY Tool 38778-C6 .078 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38778-C6 .078 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of HARVEY Tool 38739-C6 .039 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38739-C6 .039 DIA BALL HARD Mill, 5x RCH, 2 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$76.10
Picture of YG-1 52588 DIA 7/16 SH 0.4375 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

YG-1 52588 DIA 7/16 SH 0.4375 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

$76.09
Picture of YG-1 93291 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93291 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$76.05
Picture of YG-1 93413 DIA 5/16 SH 0.3125 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93413 DIA 5/16 SH 0.3125 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$76.05
Picture of YG-1 G8A46970 DIA 3MM SH 0.2362 LOC 0.0945 OAL 3.1496 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

YG-1 G8A46970 DIA 3MM SH 0.2362 LOC 0.0945 OAL 3.1496 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

$75.96
Picture of YG-1 53588 DIA 7/16 SH 0.4375 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

YG-1 53588 DIA 7/16 SH 0.4375 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

$75.91
Picture of M.A. FORD 135B50000 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® AL

M.A. FORD 135B50000 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® AL

$75.91
Picture of M.A. FORD 138B50000 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

M.A. FORD 138B50000 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

$75.91
Picture of WIDIN ZSLNB2003-0.5 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSLNB2003-0.5 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$75.89
Picture of WIDIN WGB504060150 DIA 6MM SH 0.2362 LOC 0.7874 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB504060150 DIA 6MM SH 0.2362 LOC 0.7874 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$75.88
Picture of HARVEY Tool 36946-C6 .125 BALL x 3 DEG x .875 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36946-C6 .125 BALL x 3 DEG x .875 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.80
Picture of HARVEY Tool 17747 .047 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 17747 .047 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.80
Picture of HARVEY Tool 17731 .031 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 17731 .031 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.80
Picture of HTC 143-3531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-3531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$75.78
Picture of HTC 143-4531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-4531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$75.78
Picture of HTC 143-2531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-2531 DIA 17/32 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$75.78
Picture of YG-1 GMF16925 DIA 0.024 SH 0.1875 LOC 0.0312 OAL 1.7500 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16925 DIA 0.024 SH 0.1875 LOC 0.0312 OAL 1.7500 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$75.77
Picture of EMUGE 1877A.001506 DIA 1.50MM SH 0.2362 LOC 0.1575 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1877A.001506 DIA 1.50MM SH 0.2362 LOC 0.1575 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$75.75
Picture of HARVEY Tool 39000-C6 .100 BALL x 5 DEG x .937 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 39000-C6 .100 BALL x 5 DEG x .937 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.70
Picture of HARVEY Tool 39002-C6 .109 BALL x 5 DEG x .893 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 39002-C6 .109 BALL x 5 DEG x .893 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.70
Picture of HARVEY Tool 49220-C4 .020 BALL Carbide STB FL 15x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 49220-C4 .020 BALL Carbide STB FL 15x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$75.70
Picture of YG-1 93420 DIA 5/16 SH 0.3125 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93420 DIA 5/16 SH 0.3125 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$75.68
Picture of YG-1 93298 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93298 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$75.68
Picture of WIDIN WB5420203080 DIA 2MM SH 0.3937 LOC 0.0787 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB5420203080 DIA 2MM SH 0.3937 LOC 0.0787 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$75.68
Picture of EMUGE 1960A.0250 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

EMUGE 1960A.0250 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

$75.61
Picture of EMUGE 1921R.002 DIA 2MM SH 0.2362 LOC 0.1181 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

EMUGE 1921R.002 DIA 2MM SH 0.2362 LOC 0.1181 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide CrN Single End Ball Nose Alu-Cut

$75.61
Picture of EMUGE 2942A.01875 DIA 3/16 SH 0.1875 LOC 0.1875 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 2942A.01875 DIA 3/16 SH 0.1875 LOC 0.1875 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$75.61
Picture of HARVEY Tool 21530 .030 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21530 .030 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21630 .030 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21630 .030 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21830 .030 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21830 .030 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21930 .030 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21930 .030 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21960 .060 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21960 .060 BALL x 3.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21660 .060 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21660 .060 BALL x 1.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21560 .060 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21560 .060 BALL x 0.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21860 .060 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21860 .060 BALL x 2.0 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21760 .060 BALL x 1.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21760 .060 BALL x 1.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of HARVEY Tool 21730 .030 BALL x 1.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 21730 .030 BALL x 1.5 DEG Carbide TaperED EM End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.60
Picture of YG-1 41426 DIA 1 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 41426 DIA 1 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

$75.59
Picture of YG-1 41422 DIA 1 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

YG-1 41422 DIA 1 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose General Purpose

$75.59
Picture of ROBBJACK MDM-205-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-205-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.55
Picture of ROBBJACK MDM-204-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-204-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.55
Picture of ROBBJACK DM-203-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK DM-203-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.55
Picture of ROBBJACK MDM-204-05 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-204-05 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.55
Picture of ROBBJACK DM-204-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK DM-204-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.55
Picture of IMCO 66807 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

IMCO 66807 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

$75.52
Picture of WIDIN DB514110 DIA 11MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB514110 DIA 11MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$75.49
Picture of MELIN H0133 DIA 0.015 SH 0.1250 LOC 0.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN H0133 DIA 0.015 SH 0.1250 LOC 0.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.45
Picture of HTC 195-4625 DIA 5/8 SH 0.6250 LOC 0.6875 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

HTC 195-4625 DIA 5/8 SH 0.6250 LOC 0.6875 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

$75.43
Picture of HTC 195-2625 DIA 5/8 SH 0.6250 LOC 0.6875 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

HTC 195-2625 DIA 5/8 SH 0.6250 LOC 0.6875 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

$75.43
Picture of HTC 109-3750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

HTC 109-3750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$75.43
Picture of HTC 109-4750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

HTC 109-4750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$75.43
Picture of HTC 109-2750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

HTC 109-2750 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$75.43
Picture of MELIN 11078 DIA 1/2 SH 0.50 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 11078 DIA 1/2 SH 0.50 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.41
Picture of HARVEY Tool 34035-C3 .035 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34035-C3 .035 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of HARVEY Tool 34031-C3 .031 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34031-C3 .031 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of HARVEY Tool 34039-C3 .039 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34039-C3 .039 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of HARVEY Tool 34040-C3 .040 DIA BALL 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34040-C3 .040 DIA BALL 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of HARVEY Tool 34050-C3 .050 DIA BALL 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34050-C3 .050 DIA BALL 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of HARVEY Tool 34030-C3 .030 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34030-C3 .030 BALL Carbide 8x Long Flute EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.40
Picture of MELIN 17843 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 17843 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.32
Picture of YG-1 43359CC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 2.6250 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

YG-1 43359CC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 2.6250 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

$75.32
Picture of MELIN 16116 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16116 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.32
Picture of YG-1 43359CF DIA 3/4 SH 0.7500 LOC 1.6250 OAL 2.6250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

YG-1 43359CF DIA 3/4 SH 0.7500 LOC 1.6250 OAL 2.6250 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

$75.32
Picture of HARVEY Tool 13810-C3 DIA 0.25MM LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 13810-C3 DIA 0.25MM LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.30
Picture of WIDIN DB514120 DIA 12MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB514120 DIA 12MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$75.27
Picture of IMCO 65078 DIA 5/16 SH 0.3125 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

IMCO 65078 DIA 5/16 SH 0.3125 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

$75.21
Picture of HARVEY Tool 40460-C6 .060 BALL x 7 DEG x .822 RCH, 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 40460-C6 .060 BALL x 7 DEG x .822 RCH, 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.20
Picture of ROBBJACK MSB-201-10-DLC DIA 10MM SH 0.3937 LOC 0.5510 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK MSB-201-10-DLC DIA 10MM SH 0.3937 LOC 0.5510 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$75.20
Picture of HARVEY Tool 970715 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970715 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.20
Picture of HARVEY Tool 38993-C6 .093 BALL x 5 DEG x .972 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38993-C6 .093 BALL x 5 DEG x .972 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.20
Picture of HARVEY Tool 59415 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59415 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.20
Picture of ROBBJACK MSB-301-10-DLC DIA 10MM SH 0.3937 LOC 0.5510 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK MSB-301-10-DLC DIA 10MM SH 0.3937 LOC 0.5510 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$75.20
Picture of MELIN 11630 DIA 5/8 SH 0.6250 LOC 0.2756 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

MELIN 11630 DIA 5/8 SH 0.6250 LOC 0.2756 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

$75.19
Picture of HTC 145-3546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-3546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.10
Picture of HTC 145-2546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-2546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.10
Picture of HTC 145-4546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-4546 DIA 35/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.10
Picture of YG-1 GMF16902 DIA 0.20MM SH 0.1875 LOC 0.0080 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16902 DIA 0.20MM SH 0.1875 LOC 0.0080 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$75.05
Picture of WIDIN DB34208015 DIA 8MM SH 0.3937 LOC 0.5510 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

WIDIN DB34208015 DIA 8MM SH 0.3937 LOC 0.5510 OAL 4.7244 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

$75.05
Picture of YG-1 GMF16901 DIA 0.20MM SH 0.1875 LOC 0.0080 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16901 DIA 0.20MM SH 0.1875 LOC 0.0080 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$75.05
Picture of MELIN 16194 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16194 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$75.03
Picture of HARVEY Tool 951516-C6 .250 DIA CRAD HARD Mill, 1.5x RCH, 4 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 951516-C6 .250 DIA CRAD HARD Mill, 1.5x RCH, 4 FL End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.00
Picture of HARVEY Tool 39005-C6 .118 BALL x 5 DEG x .849 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 39005-C6 .118 BALL x 5 DEG x .849 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.00
Picture of HARVEY Tool 966010-C3 .010 BALL Carbide STB FL 10x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 966010-C3 .010 BALL Carbide STB FL 10x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.00
Picture of HARVEY Tool 35610-C3 .010 BALL Carbide STB FL 12x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 35610-C3 .010 BALL Carbide STB FL 12x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$75.00
Picture of YG-1 SEMD98080130 DIA 8MM SH 0.3150 LOC 0.5510 OAL 5.1181 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEMD98080130 DIA 8MM SH 0.3150 LOC 0.5510 OAL 5.1181 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.87
Picture of YG-1 93312 DIA 9MM SH 0.3937 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93312 DIA 9MM SH 0.3937 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$74.84
Picture of YG-1 93313 DIA 10MM SH 0.3937 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93313 DIA 10MM SH 0.3937 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$74.84
Picture of YG-1 50593TE DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 50593TE DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$74.83
Picture of YG-1 51593TE DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 51593TE DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$74.83
Picture of HARVEY Tool 845547-C3 .047 BALL 8x Long Flute EM, 4 FL, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 845547-C3 .047 BALL 8x Long Flute EM, 4 FL, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.80
Picture of WIDIN DB703100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN DB703100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$74.73
Picture of TUNGALOY TEB100A2-10C10-E60 AH725 DIA 10MM SH 0.3937 LOC 0.3937 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY TEB100A2-10C10-E60 AH725 DIA 10MM SH 0.3937 LOC 0.3937 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

$74.71
Picture of HARVEY Tool 970720 DIA 0.02 LOC 0.0300 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970720 DIA 0.02 LOC 0.0300 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.70
Picture of HARVEY Tool 59420 DIA 0.02 LOC 0.0300 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59420 DIA 0.02 LOC 0.0300 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.70
Picture of HARVEY Tool 49312-C4 .187 BALL Carbide STB FL 15x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 49312-C4 .187 BALL Carbide STB FL 15x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$74.70
Picture of MELIN 16778 DIA 1/2 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16778 DIA 1/2 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.69
Picture of YG-1 E9992056 DIA 7/8 SH 0.8750 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Powder Metal Uncoated Single End Ball Nose Tank-Power End Mill

YG-1 E9992056 DIA 7/8 SH 0.8750 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Powder Metal Uncoated Single End Ball Nose Tank-Power End Mill

$74.64
Picture of YG-1 53901TD DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

YG-1 53901TD DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose Carbide End Mill

$74.61
Picture of ROBBJACK MDM-206-03 DIA 3MM SH 0.2362 LOC 0.1181 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-206-03 DIA 3MM SH 0.2362 LOC 0.1181 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.55
Picture of HARVEY Tool 40431-C6 .031 BALL x 7 DEG x .917 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 40431-C6 .031 BALL x 7 DEG x .917 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.50
Picture of HARVEY Tool 40447-C6 .047 BALL x 7 DEG x .864 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 40447-C6 .047 BALL x 7 DEG x .864 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.50
Picture of HARVEY Tool 39010-C6 .156 BALL x 5 DEG x .661 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 39010-C6 .156 BALL x 5 DEG x .661 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.50
Picture of HARVEY Tool 40462-C6 .062 BALL x 7 DEG x .815 RCH, 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 40462-C6 .062 BALL x 7 DEG x .815 RCH, 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.50
Picture of HARVEY Tool 38978-C6 .078 BALL x 5 DEG x 1.045 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 38978-C6 .078 BALL x 5 DEG x 1.045 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.50
Picture of MELIN H6689 DIA 0.04 SH 0.1250 LOC 0.1200 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

MELIN H6689 DIA 0.04 SH 0.1250 LOC 0.1200 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$74.48
Picture of HTC 145-4578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-4578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.45
Picture of HTC 145-3578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-3578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.45
Picture of HTC 145-2578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-2578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$74.45
Picture of M.A. FORD 135B37501CE DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut® AL

M.A. FORD 135B37501CE DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut® AL

$74.44
Picture of YG-1 EM876090 DIA 9MM SH 0.3937 LOC 0.3937 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 EM876090 DIA 9MM SH 0.3937 LOC 0.3937 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$74.43
Picture of YG-1 SEM84608025100 DIA 8MM SH 0.3150 LOC 0.5510 OAL 3.9370 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84608025100 DIA 8MM SH 0.3150 LOC 0.5510 OAL 3.9370 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.43
Picture of YG-1 SEM84608035100 DIA 8MM SH 0.3150 LOC 0.5510 OAL 3.9370 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84608035100 DIA 8MM SH 0.3150 LOC 0.5510 OAL 3.9370 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.43
Picture of YG-1 EM876100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 EM876100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$74.43
Picture of HARVEY Tool 29831-C4 .031 BALL x 0.5 RCH CLEAR 2FL DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 29831-C4 .031 BALL x 0.5 RCH CLEAR 2FL DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$74.40
Picture of HARVEY Tool 17810 .156 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 17810 .156 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.40
Picture of HARVEY Tool 29847-C4 .047 BALL x 0.5 RCH CLEAR 2FL DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 29847-C4 .047 BALL x 0.5 RCH CLEAR 2FL DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$74.40
Picture of HARVEY Tool 17793 .093 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 17793 .093 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.40
Picture of HARVEY Tool 966112-C4 .187 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 966112-C4 .187 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$74.40
Picture of HARVEY Tool 17808 .125 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 17808 .125 BALL x 1.0 RCH CLEAR EM, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.40
Picture of YG-1 SEM84600710 DIA 0.70MM SH 0.1575 LOC 0.0276 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84600710 DIA 0.70MM SH 0.1575 LOC 0.0276 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.37
Picture of YG-1 SEM84600510 DIA 0.50MM SH 0.1575 LOC 0.0197 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84600510 DIA 0.50MM SH 0.1575 LOC 0.0197 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.37
Picture of YG-1 SEM84600610 DIA 0.60MM SH 0.1575 LOC 0.0236 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84600610 DIA 0.60MM SH 0.1575 LOC 0.0236 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.37
Picture of MELIN 16760 DIA 1/2 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16760 DIA 1/2 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.36
Picture of EMUGE 1976A.002 DIA 2MM SH 0.2362 LOC 0.1181 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1976A.002 DIA 2MM SH 0.2362 LOC 0.1181 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$74.32
Picture of EMUGE 2942A.0250 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 2942A.0250 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$74.32
Picture of EMUGE 1973A.002 DIA 2MM SH 0.1181 LOC 0.0591 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1973A.002 DIA 2MM SH 0.1181 LOC 0.0591 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$74.32
Picture of YG-1 88592TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88592TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of YG-1 88903TN DIA 1/8 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88903TN DIA 1/8 SH 0.50 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of YG-1 88600TN DIA 1/4 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88600TN DIA 1/4 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of YG-1 88902TN DIA 3/16 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88902TN DIA 3/16 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of YG-1 88596TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88596TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of YG-1 88594TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

YG-1 88594TN DIA 1/4 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose Carbide End Mill

$74.21
Picture of MELIN H0825 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN H0825 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$74.05
Picture of YG-1 SEMD98100060 DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEMD98100060 DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.04
Picture of YG-1 SEMD98100050 DIA 10MM SH 0.3937 LOC 0.5906 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEMD98100050 DIA 10MM SH 0.3937 LOC 0.5906 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$74.04
Picture of WIDIN DB702120 DIA 12MM SH 0.4724 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN DB702120 DIA 12MM SH 0.4724 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$74.03
Picture of MELIN 16115 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16115 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$73.96
Picture of MELIN 19596 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 19596 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$73.96
Picture of WIDIN DA702012 DIA 3/8 SH 0.3750 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN DA702012 DIA 3/8 SH 0.3750 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$73.88
Picture of HTC 145-4593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-4593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.87
Picture of HTC 145-3593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-3593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.87
Picture of HTC 145-2593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HTC 145-2593 DIA 19/32 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.87
Picture of ROBBJACK B-203-12-A DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

ROBBJACK B-203-12-A DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.85
Picture of ROBBJACK B-333-12-T DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

ROBBJACK B-333-12-T DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$73.85
Picture of ROBBJACK B-203-12-C DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

ROBBJACK B-203-12-C DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$73.85
Picture of ROBBJACK B-333-12-A DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

ROBBJACK B-333-12-A DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.85
Picture of ROBBJACK B-333-12-C DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

ROBBJACK B-333-12-C DIA 3/8 SH 0.3750 LOC 0.4615 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$73.85
Picture of ROBBJACK B-203-12-T DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

ROBBJACK B-203-12-T DIA 3/8 SH 0.3750 LOC 0.8750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$73.85
Picture of MELIN 16193 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN 16193 DIA 7/16 SH 0.4375 LOC 0.2756 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$73.81
Picture of ROBBJACK MB-440-10-C DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

ROBBJACK MB-440-10-C DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$73.80
Picture of HARVEY Tool 36925-C6 .050 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36925-C6 .050 BALL x 3 DEG x .500 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.80
Picture of ROBBJACK MB-440-10-T DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

ROBBJACK MB-440-10-T DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$73.80
Picture of HARVEY Tool 36922-C6 .047 BALL x 3 DEG x .375 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36922-C6 .047 BALL x 3 DEG x .375 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.80
Picture of ROBBJACK MB-440-10-A DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

ROBBJACK MB-440-10-A DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.80
Picture of HARVEY Tool 36928-C6 .060 BALL x 3 DEG x .625 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36928-C6 .060 BALL x 3 DEG x .625 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.80
Picture of WIDIN DB512101 DIA 10MM SH 0.3937 LOC 0.9843 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB512101 DIA 10MM SH 0.3937 LOC 0.9843 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$73.71
Picture of ROBBJACK MB-203-10-A DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

ROBBJACK MB-203-10-A DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$73.65
Picture of ROBBJACK MB-203-10-T DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

ROBBJACK MB-203-10-T DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiN Single End Ball Nose

$73.65