Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ARNO ROUSE SA35-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-M1 AP5020

ISO: SA35-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA35-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA35-3003N-S1 AM5040

ISO: SA35-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 315 IC808

ISO: TGMF 315 IC808

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA35-3003N-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA35-3003N-M1 AM5040

ISO: SA35-3003N-M1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-S1 AP5020

ISO: SA35-3003R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-S1 AP5020

ISO: SA35-3003L-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M2 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SE24-4004N-M2 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: SE24-4004N-M2 AP5020

ISO: SE24-4004N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 315 IC830

ISO: TGMF 315 IC830

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M3 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SE24-4004N-M3 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: SE24-4004N-M3 AP5020

ISO: SE24-4004N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-T1 AP2220

ISO: SA35-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-M1 AP5020

ISO: SA35-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M2 AM5040 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN

ARNO ROUSE SE24-4004N-M2 AM5040 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN

ANSI: SE24-4004N-M2 AM5040

ISO: SE24-4004N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 840 IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ISCAR GIMY 840 IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ANSI: GIMY 840 IC908

ISO: GIMY 840 IC908

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ARNO ROUSE SA24-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ANSI: SA24-4004N-S1 AM5040

ISO: SA24-4004N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-M1 AP5020

ISO: SA35-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-S1 AP5020

ISO: SA35-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 402 IC808

ISO: TGMF 402 IC808

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

TUNGALOY WGE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

ANSI: WGE30 T9225

ISO: WGE30 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN

ISCAR TGMF 402 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN

ANSI: TGMF 402 IC908

ISO: TGMF 402 IC908

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 404 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ISCAR TGMF 404 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ANSI: TGMF 404 IC908

ISO: TGMF 404 IC908

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE20 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

TUNGALOY WGE20 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

ANSI: WGE20 T9225

ISO: WGE20 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 404 IC808

ISO: TGMF 404 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TGMF 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TGMF 404 IC830

ISO: TGMF 404 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TGMF 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TGMF 402 IC830

ISO: TGMF 402 IC830

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 AH7025

ISO: DTI4-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 GH130

ISO: DTI4-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 AH725

ISO: DTI4-040 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP2240

ISO: SA24-3003R-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP2240

ISO: SA24-3003N-S1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP2240

ISO: SA24-3003N-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP2240

ISO: SA24-3003L-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP2240

ISO: SE24-3003N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-020 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE3-020 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: DTE3-020 AH7025

ISO: DTE3-020 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 AH725

ISO: DTE3-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 T515

ISO: DTE3-040 T515

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 GH130

ISO: DTE3-040 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 508 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ISCAR TGMF 508 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: TGMF 508 IC20N

ISO: TGMF 508 IC20N

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 420 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 420 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 420 IC428

ISO: TGMF 420 IC428

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 AH7025

ISO: DTI3-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 GH130

ISO: DTI3-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 AH725

ISO: DTI3-040 AH725

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 8.00-4.00 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIPY 8.00-4.00 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIPY 8.00-4.00 IC07

ISO: GIPY 8.00-4.00 IC07

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 608 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 608 IC8250

ISO: GIMF 608 IC8250

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 608 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 608 IC5010

ISO: GIMF 608 IC5010

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 8.00-4.00 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIPY 8.00-4.00 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIPY 8.00-4.00 IC20

ISO: GIPY 8.00-4.00 IC20

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 302 IC808

ISO: TGMF 302 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 302 IC830

ISO: TGMF 302 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 808 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ISCAR GIMY 808 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ANSI: GIMY 808 IC908

ISO: GIMY 808 IC908

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIMF 808 IC830

ISO: GIMF 808 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIMY 808 IC830

ISO: GIMY 808 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 304 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ISCAR TGMF 304 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ANSI: TGMF 304 IC908

ISO: TGMF 304 IC908

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 808 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ISCAR GIMY 808 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ANSI: GIMY 808 IC806

ISO: GIMY 808 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 304 IC830

ISO: TGMF 304 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 808 IC808

ISO: GIMY 808 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 304 IC808

ISO: TGMF 304 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 302 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ISCAR TGMF 302 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ANSI: TGMF 302 IC908

ISO: TGMF 302 IC908

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 808 IC808

ISO: GIMF 808 IC808

Call (262) 251-4020 for pricing
Picture of TUNGALOY ETX6-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.236 Wide

TUNGALOY ETX6-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.236 Wide

ANSI: ETX6-040 AH725

ISO: ETX6-040 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP2240 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP2240 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP2240

ISO: SA24-2503N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ISCAR TGMP 506 IC20N Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ISCAR TGMP 506 IC20N Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ANSI: TGMP 506 IC20N

ISO: TGMP 506 IC20N

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDXT4E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDXT4E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDXT4E-0.4 K10

ISO: TDXT4E-0.4 K10

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDC4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC4 K10

ISO: TDC4 K10

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502N-S1 AP5020

ISO: SA24-1502N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-S1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-1502N-S1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-1502N-S1 AM5040

ISO: SA24-1502N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502R-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502R-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502R-S1 AP5020

ISO: SA24-1502R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-T1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-1502N-T1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-1502N-T1 AM5040

ISO: SA24-1502N-T1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502N-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502N-T1 AP5020

ISO: SA24-1502N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502R-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502R-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502R-T1 AP5020

ISO: SA24-1502R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-T1 AP2220

ISO: SA35-2002N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002L-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002L-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002L-S1 -12 AM5040

ISO: SA35-2002L-S1 -12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-M1 AP5020

ISO: SA35-2002N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-T1 AP5020

ISO: SA35-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002L-S1 -12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002L-S1 -12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002L-S1 -12 AP5020

ISO: SA35-2002L-S1 -12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002R-S1-12 AP5020

ISO: SA35-2002R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002R-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002R-M1 AP5020

ISO: SA35-2002R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002N-S1 AM5040

ISO: SA35-2002N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-F1 AP5020

ISO: SA35-2002N-F1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002R-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002R-S1 -12 AM5040

ISO: SA35-2002R-S1 -12 AM5040

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 402 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 402 IC428

ISO: TGMF 402 IC428

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-S1 AP5020

ISO: SA35-2002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 404 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 404 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 404 IC428

ISO: TGMF 404 IC428

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002L-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002L-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002L-M1 AP5020

ISO: SA35-2002L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-F1 AP2220

ISO: SA35-2002N-F1 AP2220

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTD3 AH725 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY CTD3 AH725 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: CTD3 AH725

ISO: CTD3 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002R-S1-12 AP5020

ISO: SA24-3002R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-T1 AP5020

ISO: SA24-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA16-1502N-S1 AP5020

ISO: SA16-1502N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT4E-2.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT4E-2.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT4E-2.0-RU TT5100

ISO: TDT4E-2.0-RU TT5100

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT4E-2.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiAIN + TiN

INGERSOLL TDT4E-2.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiAIN + TiN

ANSI: TDT4E-2.0-RU TT9080

ISO: TDT4E-2.0-RU TT9080

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT4E-2.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT4E-2.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT4E-2.0-RU TT7505

ISO: TDT4E-2.0-RU TT7505

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003L-S1 AM5040

ISO: SA24-3003L-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SE24-3003N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SE24-3003N-M2 AM5040

ISO: SE24-3003N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-T1 AP2220

ISO: SA24-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-S1 AM5040

ISO: SA24-3003R-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003N-S1 AM5040

ISO: SA24-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-T1 AP2240

ISO: SA24-2002N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 302 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TIC + Al2O3

ISCAR TGMF 302 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TIC + Al2O3

ANSI: TGMF 302 IC428

ISO: TGMF 302 IC428

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-S1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-S1 AP2240

ISO: SA24-2002N-S1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP5020

ISO: SA24-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SE24-3002N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SE24-3002N-M2 AM5040

ISO: SE24-3002N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP5020

ISO: SA24-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP5020

ISO: SE24-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M3 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-3002N-M3 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SE24-3002N-M3 AP5020

ISO: SE24-3002N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP2220

ISO: SA24-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-T1 AP2240

ISO: SE24-2002N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-T1 AP5020

ISO: SA24-3003R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-T1 AP5020

ISO: SA24-3003L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP2240

ISO: SA24-2002N-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-T1 AM5040

ISO: SA24-3003R-T1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP5030

ISO: SA24-3003N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-M2 AP5020

ISO: SE24-3003N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-3002N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SE24-3002N-M2 AP5020

ISO: SE24-3002N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP2220

ISO: SA24-3003L-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP5030

ISO: SE24-3003N-T1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP5020

ISO: SA24-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP2220

ISO: SA24-3003R-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-T1 AP2220

ISO: SA24-3003L-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP5020

ISO: SA24-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 304 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TIC + Al2O3

ISCAR TGMF 304 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TIC + Al2O3

ANSI: TGMF 304 IC428

ISO: TGMF 304 IC428

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMY 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMY 630 IC830

ISO: GIMY 630 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 4.00-2.00 IC907 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIPY 4.00-2.00 IC907 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIPY 4.00-2.00 IC907

ISO: GIPY 4.00-2.00 IC907

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 635-318 IC830 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN + TiN

ISCAR GIMY 635-318 IC830 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN + TiN

ANSI: GIMY 635-318 IC830

ISO: GIMY 635-318 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 4.00-2.00 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GIPY 4.00-2.00 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GIPY 4.00-2.00 IC804

ISO: GIPY 4.00-2.00 IC804

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 420-UN IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 420-UN IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 420-UN IC8250

ISO: GIMY 420-UN IC8250

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GIMY 630 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GIMY 630 IC806

ISO: GIMY 630 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 635-318 IC808 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 635-318 IC808 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 635-318 IC808

ISO: GIMY 635-318 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630F IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 630F IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 630F IC808

ISO: GIMY 630F IC808

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 630 IC808

ISO: GIMY 630 IC808

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT5E-2.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius

INGERSOLL TDT5E-2.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius

ANSI: TDT5E-2.5-RU CT3000

ISO: TDT5E-2.5-RU CT3000

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630 IC804 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ISCAR GIMY 630 IC804 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ANSI: GIMY 630 IC804

ISO: GIMY 630 IC804

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630F IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR GIMY 630F IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: GIMY 630F IC908

ISO: GIMY 630F IC908

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 4.00-2.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ISCAR GIPY 4.00-2.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ANSI: GIPY 4.00-2.00 IC806

ISO: GIPY 4.00-2.00 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR GIMY 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: GIMY 630 IC908

ISO: GIMY 630 IC908

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 4.00-2.00 IC320 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN

ISCAR GIPY 4.00-2.00 IC320 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN

ANSI: GIPY 4.00-2.00 IC320

ISO: GIPY 4.00-2.00 IC320

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 630F IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GIMY 630F IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GIMY 630F IC806

ISO: GIMY 630F IC806

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-M1 AP2220

ISO: SA35-2002N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003L-S1 AM5040

ISO: SA16-3003L-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003N-S1 AM5040

ISO: SA16-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-M1 AP5020

ISO: SA16-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-M1 AP2220

ISO: SA16-3003L-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-M1 AP2220

ISO: SA16-3003R-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003R-S1 AM5040

ISO: SA16-3003R-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-T1 AP5020

ISO: SA16-3003L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-T1 AP2220

ISO: SA16-3003L-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-M1 AP5020

ISO: SA16-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-T1 AP5020

ISO: SA16-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-T1 AP5020

ISO: SA16-3003R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-T1 AP2220

ISO: SA16-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-S1 AP5020

ISO: SA16-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-M1 AP5020

ISO: SA16-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-T1 AP2220

ISO: SA16-3003N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-M1 AP2220

ISO: SA16-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-S1 AP5020

ISO: SA24-2503N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 635-080 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ISCAR TGMF 635-080 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ANSI: TGMF 635-080 IC20

ISO: TGMF 635-080 IC20

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-M1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-M1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-M1 AP5020

ISO: SA24-2503N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP5030

ISO: SA24-2503N-T1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-S1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-S1 AP5030

ISO: SA24-2503N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-2503N-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-2503N-S1 AM5040

ISO: SA24-2503N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP5020

ISO: SA24-2503N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT3E-1.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT3E-1.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT3E-1.5-RU TT7505

ISO: TDT3E-1.5-RU TT7505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT3E-1.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT3E-1.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT3E-1.5-RU TT5100

ISO: TDT3E-1.5-RU TT5100

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT3E-1.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiAIN + TiN

INGERSOLL TDT3E-1.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiAIN + TiN

ANSI: TDT3E-1.5-RU TT9080

ISO: TDT3E-1.5-RU TT9080

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT3E-1.5-RU PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN

INGERSOLL TDT3E-1.5-RU PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN

ANSI: TDT3E-1.5-RU PV3030

ISO: TDT3E-1.5-RU PV3030

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT40 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY WGT40 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: WGT40 T9225

ISO: WGT40 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 315-UN IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 315-UN IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 315-UN IC8250

ISO: GIMY 315-UN IC8250

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT50 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY WGT50 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: WGT50 T9225

ISO: WGT50 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY WGR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: WGR40 T9225

ISO: WGR40 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 3.00-1.50 IC320 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN

ISCAR GIPY 3.00-1.50 IC320 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN

ANSI: GIPY 3.00-1.50 IC320

ISO: GIPY 3.00-1.50 IC320

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002N-S1 AP5020

ISO: SA24-3002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 3.00-1.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR GIPY 3.00-1.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: GIPY 3.00-1.50 IC806

ISO: GIPY 3.00-1.50 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 3.00-1.50 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GIPY 3.00-1.50 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GIPY 3.00-1.50 IC804

ISO: GIPY 3.00-1.50 IC804

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 525 IC8250

ISO: GIMY 525 IC8250

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-M1 AM5040

ISO: SA24-3003R-M1 AM5040

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 NS9530

ISO: DTR5-250 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMF 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMF 608 IC830

ISO: GIMF 608 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMN 608 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAIN + TiN

ISCAR GIMN 608 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAIN + TiN

ANSI: GIMN 608 IC907

ISO: GIMN 608 IC907

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 608 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 608 IC808

ISO: GIMF 608 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 6.00-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIPY 6.00-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIPY 6.00-3.00 IC20

ISO: GIPY 6.00-3.00 IC20

Call (262) 251-4020 for pricing
Picture of ISCAR GIMT 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMT 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMT 608 IC830

ISO: GIMT 608 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMT 608 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ISCAR GIMT 608 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ANSI: GIMT 608 IC806

ISO: GIMT 608 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 605 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMF 605 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMF 605 IC830

ISO: GIMF 605 IC830

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 605 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 605 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 605 IC808

ISO: GIMF 605 IC808

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ISCAR GIMF 608 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ANSI: GIMF 608 IC804

ISO: GIMF 608 IC804

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 608 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ISCAR GIMF 608 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ANSI: GIMF 608 IC806

ISO: GIMF 608 IC806

Call (262) 251-4020 for pricing
Picture of ISCAR GIM 6C IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN

ISCAR GIM 6C IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN

ANSI: GIM 6C IC908

ISO: GIM 6C IC908

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 525 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR TGMF 525 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: TGMF 525 IC20

ISO: TGMF 525 IC20

Call (262) 251-4020 for pricing
Picture of ISCAR GIM 6C IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN

ISCAR GIM 6C IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN

ANSI: GIM 6C IC328

ISO: GIM 6C IC328

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDC2 K10 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC2 K10 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC2 K10

ISO: TDC2 K10

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDC3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC3 K10

ISO: TDC3 K10

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDXU3E-0.3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDXU3E-0.3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDXU3E-0.3 K10

ISO: TDXU3E-0.3 K10

Call (262) 251-4020 for pricing
Picture of TUNGALOY ETX5-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

TUNGALOY ETX5-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

ANSI: ETX5-040 AH725

ISO: ETX5-040 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-T1 AP5020

ISO: SA24-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP5020

ISO: SA24-2002N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP2220

ISO: SA24-2002N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AP5030 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-S1 AP5030 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-S1 AP5030

ISO: SA24-2002N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-2002N-S1 AM5040

ISO: SA24-2002N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-M2 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SE24-2002N-M2 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SE24-2002N-M2 AM5040

ISO: SE24-2002N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-M3 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-M3 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-M3 AP5020

ISO: SE24-2002N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-F1 AP2220

ISO: SA24-2002N-F1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001R-S1-12 AP5020

ISO: SA24-2001R-S1-12 AP5020

Call (262) 251-4020 for pricing