Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ARNO ROUSE SA35-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-T1 AP2240

ISO: SA35-3003N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ISCAR SCIR 22-150NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide

ISCAR SCIR 22-150NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide

ANSI: SCIR 22-150NP05 IC07

ISO: SCIR 22-150NP05 IC07

$30.24
Picture of ISCAR SCIR 22-100NP08 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide

ISCAR SCIR 22-100NP08 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide

ANSI: SCIR 22-100NP08 IC07

ISO: SCIR 22-100NP08 IC07

$30.24
Picture of ISCAR SCIR 22-200NP05 IC07 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide

ISCAR SCIR 22-200NP05 IC07 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide

ANSI: SCIR 22-200NP05 IC07

ISO: SCIR 22-200NP05 IC07

$30.24
Picture of ISCAR SCIL 22-100NP08 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide

ISCAR SCIL 22-100NP08 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide

ANSI: SCIL 22-100NP08 IC07

ISO: SCIL 22-100NP08 IC07

$30.24
Picture of ISCAR SCIR 22-080NP00 IC07 Cut Off,Grooving,Groove Turning Insert 0.031 Wide

ISCAR SCIR 22-080NP00 IC07 Cut Off,Grooving,Groove Turning Insert 0.031 Wide

ANSI: SCIR 22-080NP00 IC07

ISO: SCIR 22-080NP00 IC07

$30.24
Picture of ISCAR SCIL 22-150NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide

ISCAR SCIL 22-150NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide

ANSI: SCIL 22-150NP05 IC07

ISO: SCIL 22-150NP05 IC07

$30.24
Picture of ISCAR SCIR 22-250NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide

ISCAR SCIR 22-250NP05 IC07 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide

ANSI: SCIR 22-250NP05 IC07

ISO: SCIR 22-250NP05 IC07

$30.24
Picture of ISCAR SCIL 22-080NP00 IC07 Cut Off,Grooving,Groove Turning Insert 0.031 Wide

ISCAR SCIL 22-080NP00 IC07 Cut Off,Grooving,Groove Turning Insert 0.031 Wide

ANSI: SCIL 22-080NP00 IC07

ISO: SCIL 22-080NP00 IC07

$30.24
Picture of ARNO ROUSE SE24-3015N-RP1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN

ARNO ROUSE SE24-3015N-RP1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN

ANSI: SE24-3015N-RP1 AP5020

ISO: SE24-3015N-RP1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR MIGR 8-1.50-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ISCAR MIGR 8-1.50-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ANSI: MIGR 8-1.50-0.05 IC908

ISO: MIGR 8-1.50-0.05 IC908

$30.16
Picture of ISCAR MIGR 8-1.00-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.039 Wide TiAlN

ISCAR MIGR 8-1.00-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.039 Wide TiAlN

ANSI: MIGR 8-1.00-0.05 IC908

ISO: MIGR 8-1.00-0.05 IC908

$30.16
Picture of ISCAR MIGR 8-0.50-0.00 IC908 Grooving,Groove Turning Insert 0.020 Wide TiAlN

ISCAR MIGR 8-0.50-0.00 IC908 Grooving,Groove Turning Insert 0.020 Wide TiAlN

ANSI: MIGR 8-0.50-0.00 IC908

ISO: MIGR 8-0.50-0.00 IC908

$30.16
Picture of ISCAR MIGR 8-2.00-0.10 IC908 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAlN

ISCAR MIGR 8-2.00-0.10 IC908 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAlN

ANSI: MIGR 8-2.00-0.10 IC908

ISO: MIGR 8-2.00-0.10 IC908

$30.16
Picture of ISCAR MIGR 8-1.20-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiAlN

ISCAR MIGR 8-1.20-0.05 IC908 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiAlN

ANSI: MIGR 8-1.20-0.05 IC908

ISO: MIGR 8-1.20-0.05 IC908

$30.16
Picture of SECO LCMR160304-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160304-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160304-0300-MT TGP25

ISO: LCMR160304-0300-MT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMR160304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160304-0300-FT TGP25

ISO: LCMR160304-0300-FT TGP25

Call (262) 251-4020 for pricing
Picture of ISCAR GDMY 840 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GDMY 840 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GDMY 840 IC20

ISO: GDMY 840 IC20

$30.01
Picture of ISCAR HFPL 4004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ISCAR HFPL 4004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ANSI: HFPL 4004 IC806

ISO: HFPL 4004 IC806

$30.01
Picture of ISCAR GRIP 4004Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ISCAR GRIP 4004Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ANSI: GRIP 4004Y IC806

ISO: GRIP 4004Y IC806

$30.01
Picture of ISCAR GRIP 4004Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.157 Wide TiAlN

ISCAR GRIP 4004Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.157 Wide TiAlN

ANSI: GRIP 4004Y IC908

ISO: GRIP 4004Y IC908

$30.01
Picture of ISCAR GIPA 5.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ISCAR GIPA 5.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ANSI: GIPA 5.00-0.40 IC20

ISO: GIPA 5.00-0.40 IC20

$30.01
Picture of ISCAR HFPR 4004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ISCAR HFPR 4004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ANSI: HFPR 4004 IC806

ISO: HFPR 4004 IC806

$30.01
Picture of ISCAR GRIP 4004Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GRIP 4004Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GRIP 4004Y IC808

ISO: GRIP 4004Y IC808

$30.01
Picture of ISCAR GRIP 3003Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.012 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GRIP 3003Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.012 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GRIP 3003Y IC8250

ISO: GRIP 3003Y IC8250

$30.01
Picture of ISCAR GRIP 4004Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GRIP 4004Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GRIP 4004Y IC804

ISO: GRIP 4004Y IC804

$30.01
Picture of ISCAR GRIP 4002Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.157 Wide TiAlN

ISCAR GRIP 4002Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.157 Wide TiAlN

ANSI: GRIP 4002Y IC908

ISO: GRIP 4002Y IC908

$30.01
Picture of TUNGALOY DTI3-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 T9225

ISO: DTI3-040 T9225

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-T1 AP5030

ISO: SA24-3003N-T1 AP5030

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDIT4.00E-0.40 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT4.00E-0.40 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT4.00E-0.40 TT5100

ISO: TDIT4.00E-0.40 TT5100

$29.99
Picture of INGERSOLL TDIT4.00E-0.40 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

INGERSOLL TDIT4.00E-0.40 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: TDIT4.00E-0.40 TT7220

ISO: TDIT4.00E-0.40 TT7220

$29.99
Picture of INGERSOLL TDIT4.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiCN

INGERSOLL TDIT4.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiCN

ANSI: TDIT4.00E-0.80 TT7220

ISO: TDIT4.00E-0.80 TT7220

$29.99
Picture of INGERSOLL TDIT4.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT4.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT4.00E-0.80 TT5100

ISO: TDIT4.00E-0.80 TT5100

$29.99
Picture of ISCAR GIF 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR GIF 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: GIF 5.00E-2.50 IC20

ISO: GIF 5.00E-2.50 IC20

$29.93
Picture of ISCAR GIFI 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR GIFI 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: GIFI 5.00E-2.50 IC20

ISO: GIFI 5.00E-2.50 IC20

$29.93
Picture of ISCAR GIP 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR GIP 5.00E-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: GIP 5.00E-2.50 IC20

ISO: GIP 5.00E-2.50 IC20

$29.93
Picture of ISCAR GIPI 4.78-2.39 IC20 Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide

ISCAR GIPI 4.78-2.39 IC20 Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide

ANSI: GIPI 4.78-2.39 IC20

ISO: GIPI 4.78-2.39 IC20

$29.93
Picture of ISCAR GIQL 11-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 11-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 11-A18-0.15 IC528

ISO: GIQL 11-A18-0.15 IC528

$29.77
Picture of ISCAR GIQR 11-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 11-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 11-A18-0.15 IC528

ISO: GIQR 11-A18-0.15 IC528

$29.77
Picture of ISCAR GIQL 8-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 8-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 8-A18-0.15 IC528

ISO: GIQL 8-A18-0.15 IC528

$29.39
Picture of ISCAR GIQR 8-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 8-A18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 8-A18-0.15 IC528

ISO: GIQR 8-A18-0.15 IC528

$29.39
Picture of ISCAR GIP 4.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIP 4.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIP 4.00E-0.40 IC20N

ISO: GIP 4.00E-0.40 IC20N

$29.39
Picture of INGERSOLL TDIT3.00E-0.40 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiCN

INGERSOLL TDIT3.00E-0.40 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiCN

ANSI: TDIT3.00E-0.40 TT7220

ISO: TDIT3.00E-0.40 TT7220

$29.32
Picture of INGERSOLL TDIT3.00E-0.40 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT3.00E-0.40 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT3.00E-0.40 TT5100

ISO: TDIT3.00E-0.40 TT5100

$29.32
Picture of TUNGALOY DTR4-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 AH7025

ISO: DTR4-200 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR4-200 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 AH905

ISO: DTR4-200 AH905

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR4-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 AH725

ISO: DTR4-200 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR4-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 GH130

ISO: DTR4-200 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR GRIP 318-159Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide AlTiN

ISCAR GRIP 318-159Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide AlTiN

ANSI: GRIP 318-159Y IC806

ISO: GRIP 318-159Y IC806

$29.08
Picture of ISCAR GRIP 318-159Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.063 Corner Radius 0.125 Wide TiAlN

ISCAR GRIP 318-159Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.063 Corner Radius 0.125 Wide TiAlN

ANSI: GRIP 318-159Y IC908

ISO: GRIP 318-159Y IC908

$29.08
Picture of ISCAR GRIP 3015Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GRIP 3015Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GRIP 3015Y IC808

ISO: GRIP 3015Y IC808

$29.08
Picture of ISCAR HFPL 3015 IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR HFPL 3015 IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: HFPL 3015 IC806

ISO: HFPL 3015 IC806

$29.08
Picture of ISCAR GRIP 3015Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR GRIP 3015Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: GRIP 3015Y IC806

ISO: GRIP 3015Y IC806

$29.08
Picture of ISCAR HFPR 3015 IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR HFPR 3015 IC806 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: HFPR 3015 IC806

ISO: HFPR 3015 IC806

$29.08
Picture of ISCAR GRIP 3015Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GRIP 3015Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GRIP 3015Y IC804

ISO: GRIP 3015Y IC804

$29.08
Picture of ISCAR GRIP 3015Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.059 Corner Radius 0.118 Wide TiAlN

ISCAR GRIP 3015Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.059 Corner Radius 0.118 Wide TiAlN

ANSI: GRIP 3015Y IC908

ISO: GRIP 3015Y IC908

$29.08
Picture of ISCAR GDMY 808 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ISCAR GDMY 808 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ANSI: GDMY 808 IC20

ISO: GDMY 808 IC20

$29.00
Picture of ISCAR FGPAM 10S-3R-25A IC20 Grooving,Groove Turning Insert 0.118 Corner Radius

ISCAR FGPAM 10S-3R-25A IC20 Grooving,Groove Turning Insert 0.118 Corner Radius

ANSI: FGPAM 10S-3R-25A IC20

ISO: FGPAM 10S-3R-25A IC20

$29.00
Picture of ARNO ROUSE SE24-2010N-RP1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.039 Corner Radius TiCN

ARNO ROUSE SE24-2010N-RP1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.039 Corner Radius TiCN

ANSI: SE24-2010N-RP1 AP5020

ISO: SE24-2010N-RP1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR TGMF 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: TGMF 630 IC908

ISO: TGMF 630 IC908

$28.85
Picture of ISCAR GIP 3.00E-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GIP 3.00E-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GIP 3.00E-0.20 IC20N

ISO: GIP 3.00E-0.20 IC20N

$28.85
Picture of ISCAR GIPI 3.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIPI 3.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIPI 3.00E-0.40 IC20N

ISO: GIPI 3.00E-0.40 IC20N

$28.85
Picture of ISCAR GIP 3.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIP 3.00E-0.40 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIP 3.00E-0.40 IC20N

ISO: GIP 3.00E-0.40 IC20N

$28.85
Picture of ISCAR TGMF 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR TGMF 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: TGMF 630 IC830

ISO: TGMF 630 IC830

$28.85
Picture of ISCAR HFPN 2010 IC808 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAlN + AlTiN + TiN

ISCAR HFPN 2010 IC808 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAlN + AlTiN + TiN

ANSI: HFPN 2010 IC808

ISO: HFPN 2010 IC808

$28.85
Picture of ISCAR TGMF 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 630 IC808

ISO: TGMF 630 IC808

$28.85
Picture of ISCAR GIPI 3.18-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide

ISCAR GIPI 3.18-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide

ANSI: GIPI 3.18-0.20 IC20N

ISO: GIPI 3.18-0.20 IC20N

$28.85
Picture of ISCAR GIP 2.47-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide

ISCAR GIP 2.47-0.20 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide

ANSI: GIP 2.47-0.20 IC20N

ISO: GIP 2.47-0.20 IC20N

$28.85
Picture of ISCAR GIQR 11-B18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQR 11-B18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQR 11-B18-0.15 IC528

ISO: GIQR 11-B18-0.15 IC528

$28.85
Picture of TUNGALOY FLEX30R NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY FLEX30R NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: FLEX30R NS9530

ISO: FLEX30R NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY FLEX30L NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY FLEX30L NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: FLEX30L NS9530

ISO: FLEX30L NS9530

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDXU5E-0.4 PV3520 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN

INGERSOLL TDXU5E-0.4 PV3520 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN

ANSI: TDXU5E-0.4 PV3520

ISO: TDXU5E-0.4 PV3520

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU5E-0.8 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU5E-0.8 TT5100

ISO: TDXU5E-0.8 TT5100

$28.79
Picture of INGERSOLL TDC5 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC5 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

ANSI: TDC5 TT7220

ISO: TDC5 TT7220

$28.79
Picture of INGERSOLL TDC5 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC5 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

ANSI: TDC5 TT8020

ISO: TDC5 TT8020

$28.79
Picture of INGERSOLL TDXU5E-0.4 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN

INGERSOLL TDXU5E-0.4 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN

ANSI: TDXU5E-0.4 PV3030

ISO: TDXU5E-0.4 PV3030

$28.79
Picture of INGERSOLL TDC5-4R TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC5-4R TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

ANSI: TDC5-4R TT7220

ISO: TDC5-4R TT7220

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiAIN + TiN

INGERSOLL TDXU5E-0.4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiAIN + TiN

ANSI: TDXU5E-0.4 TT9080

ISO: TDXU5E-0.4 TT9080

$28.79
Picture of INGERSOLL TDC5-4R TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC5-4R TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiCN

ANSI: TDC5-4R TT8020

ISO: TDC5-4R TT8020

$28.79
Picture of INGERSOLL TDC5-4R TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiAIN + TiN

INGERSOLL TDC5-4R TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiAIN + TiN

ANSI: TDC5-4R TT9080

ISO: TDC5-4R TT9080

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

INGERSOLL TDXU5E-0.8 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

ANSI: TDXU5E-0.8 TT8020

ISO: TDXU5E-0.8 TT8020

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN

INGERSOLL TDXU5E-0.4 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN

ANSI: TDXU5E-0.4 TT7220

ISO: TDXU5E-0.4 TT7220

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiAIN + TiN

INGERSOLL TDXU5E-0.8 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiAIN + TiN

ANSI: TDXU5E-0.8 TT9080

ISO: TDXU5E-0.8 TT9080

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN

INGERSOLL TDXU5E-0.4 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN

ANSI: TDXU5E-0.4 TT8020

ISO: TDXU5E-0.4 TT8020

$28.79
Picture of INGERSOLL TDC5 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiAIN + TiN

INGERSOLL TDC5 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiAIN + TiN

ANSI: TDC5 TT9080

ISO: TDC5 TT9080

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

INGERSOLL TDXU5E-0.8 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

ANSI: TDXU5E-0.8 TT7220

ISO: TDXU5E-0.8 TT7220

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU5E-0.4 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU5E-0.4 TT5100

ISO: TDXU5E-0.4 TT5100

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius AlTiN + TiN

INGERSOLL TDXU5E-0.8 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius AlTiN + TiN

ANSI: TDXU5E-0.8 TT6080

ISO: TDXU5E-0.8 TT6080

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU5E-0.4 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU5E-0.4 TT7505

ISO: TDXU5E-0.4 TT7505

$28.79
Picture of INGERSOLL TDXU5E-0.8 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU5E-0.8 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU5E-0.8 TT7505

ISO: TDXU5E-0.8 TT7505

$28.79
Picture of INGERSOLL TDXU5E-0.4 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius AlTiN + TiN

INGERSOLL TDXU5E-0.4 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius AlTiN + TiN

ANSI: TDXU5E-0.4 TT6080

ISO: TDXU5E-0.4 TT6080

$28.79
Picture of ISCAR GIFI 5.00E-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide

ISCAR GIFI 5.00E-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide

ANSI: GIFI 5.00E-0.50 IC20

ISO: GIFI 5.00E-0.50 IC20

$28.69
Picture of ISCAR GIP 5.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ISCAR GIP 5.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ANSI: GIP 5.00E-0.60 IC20

ISO: GIP 5.00E-0.60 IC20

$28.69
Picture of ISCAR GIFI 4.78-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ISCAR GIFI 4.78-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ANSI: GIFI 4.78-0.55 IC20

ISO: GIFI 4.78-0.55 IC20

$28.69
Picture of ISCAR GIPI 5.00E-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide

ISCAR GIPI 5.00E-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide

ANSI: GIPI 5.00E-0.50 IC20

ISO: GIPI 5.00E-0.50 IC20

$28.69
Picture of ISCAR FSMA 80-40 IC07 Face Grooving,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FSMA 80-40 IC07 Face Grooving,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FSMA 80-40 IC07

ISO: FSMA 80-40 IC07

$28.69
Picture of ISCAR GIF 4.45-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide

ISCAR GIF 4.45-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide

ANSI: GIF 4.45-0.15 IC20

ISO: GIF 4.45-0.15 IC20

$28.69
Picture of ISCAR GIFI 5.28-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide

ISCAR GIFI 5.28-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide

ANSI: GIFI 5.28-0.20 IC20

ISO: GIFI 5.28-0.20 IC20

$28.69
Picture of ISCAR FGMA 840 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FGMA 840 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FGMA 840 IC07

ISO: FGMA 840 IC07

$28.69
Picture of ISCAR GIP 5.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ISCAR GIP 5.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: GIP 5.00E-0.80 IC20

ISO: GIP 5.00E-0.80 IC20

$28.69
Picture of ISCAR GIP 5.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ISCAR GIP 5.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ANSI: GIP 5.00-0.40 IC20

ISO: GIP 5.00-0.40 IC20

$28.69
Picture of ISCAR GIF 5.39-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide

ISCAR GIF 5.39-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide

ANSI: GIF 5.39-0.20 IC20

ISO: GIF 5.39-0.20 IC20

$28.69
Picture of ISCAR GDMA 840 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GDMA 840 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GDMA 840 IC07

ISO: GDMA 840 IC07

$28.69
Picture of ISCAR GIF 4.86-0.30 IC20 Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide

ISCAR GIF 4.86-0.30 IC20 Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide

ANSI: GIF 4.86-0.30 IC20

ISO: GIF 4.86-0.30 IC20

$28.69
Picture of ISCAR GIP 5.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ISCAR GIP 5.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ANSI: GIP 5.00E-0.40 IC20

ISO: GIP 5.00E-0.40 IC20

$28.69
Picture of ISCAR GIF 5.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ISCAR GIF 5.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide

ANSI: GIF 5.00E-0.40 IC20

ISO: GIF 5.00E-0.40 IC20

$28.69
Picture of ISCAR GIP 4.78E-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ISCAR GIP 4.78E-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ANSI: GIP 4.78E-0.55 IC20

ISO: GIP 4.78E-0.55 IC20

$28.69
Picture of ISCAR GIF 5.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ISCAR GIF 5.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ANSI: GIF 5.00E-0.60 IC20

ISO: GIF 5.00E-0.60 IC20

$28.69
Picture of ISCAR GIF 5.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ISCAR GIF 5.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: GIF 5.00E-0.80 IC20

ISO: GIF 5.00E-0.80 IC20

$28.69
Picture of ISCAR GIPI 4.78-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ISCAR GIPI 4.78-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide

ANSI: GIPI 4.78-0.55 IC20

ISO: GIPI 4.78-0.55 IC20

$28.69
Picture of ISCAR GIQR 8-B18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQR 8-B18-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQR 8-B18-0.15 IC528

ISO: GIQR 8-B18-0.15 IC528

$28.61
Picture of ARNO ROUSE SA24-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-T1 AP2220

ISO: SA24-3003N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ISCAR GIQL 11-15-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQL 11-15-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQL 11-15-2.50-0.20 IC528

ISO: GIQL 11-15-2.50-0.20 IC528

$28.46
Picture of ISCAR GIQR 11-15-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQR 11-15-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQR 11-15-1.50-0.05 IC528

ISO: GIQR 11-15-1.50-0.05 IC528

$28.46
Picture of ISCAR GIQL 11-15-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 11-15-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 11-15-3.00-0.20 IC528

ISO: GIQL 11-15-3.00-0.20 IC528

$28.46
Picture of ISCAR GIQR 11-15-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQR 11-15-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQR 11-15-2.50-0.20 IC528

ISO: GIQR 11-15-2.50-0.20 IC528

$28.46
Picture of ISCAR GIQL 11-15-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQL 11-15-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQL 11-15-1.50-0.05 IC528

ISO: GIQL 11-15-1.50-0.05 IC528

$28.46
Picture of ISCAR GIQR 11-15-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQR 11-15-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQR 11-15-2.00-0.10 IC528

ISO: GIQR 11-15-2.00-0.10 IC528

$28.46
Picture of ISCAR GIQR 11-15-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 11-15-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 11-15-3.00-0.20 IC528

ISO: GIQR 11-15-3.00-0.20 IC528

$28.46
Picture of ISCAR GIQL 11-15-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQL 11-15-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQL 11-15-2.00-0.10 IC528

ISO: GIQL 11-15-2.00-0.10 IC528

$28.46
Picture of TUNGALOY DTE4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTE4-040 GH130

ISO: DTE4-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE4-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

TUNGALOY DTE4-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

ANSI: DTE4-080 AH7025

ISO: DTE4-080 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR3-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 AH7025

ISO: DTR3-150 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTE4-040 AH725

ISO: DTE4-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE4-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE4-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTE4-040 T515

ISO: DTE4-040 T515

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR3-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 GH130

ISO: DTR3-150 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR3-150 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 AH905

ISO: DTR3-150 AH905

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR3-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 AH725

ISO: DTR3-150 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SE24-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: SE24-4004N-T1 AP5020

ISO: SE24-4004N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-T1 AP5020

ISO: SA35-3003R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-T1 AP5020

ISO: SA35-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA35-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA35-3003N-S1 AM5040

ISO: SA35-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-4004N-M1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA24-4004N-M1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA24-4004N-M1 AP5020

ISO: SA24-4004N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA35-3003N-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA35-3003N-M1 AM5040

ISO: SA35-3003N-M1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-M1 AP2220

ISO: SA35-3003R-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-T1 AP2220

ISO: SA35-3003L-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA35-3003N-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA35-3003N-T1 AM5040

ISO: SA35-3003N-T1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-M1 AP5020

ISO: SA35-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-M1 AP2220

ISO: SA35-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-S1 AP5030

ISO: SA35-3003N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-4004N-M1 AP2220 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA24-4004N-M1 AP2220 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA24-4004N-M1 AP2220

ISO: SA24-4004N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-M1 AP5020

ISO: SA35-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-M1 AP2220

ISO: SA35-3003L-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-T1 AP5020

ISO: SA35-3003L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA24-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA24-4004N-T1 AP5020

ISO: SA24-4004N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003N-S1 AP5020

ISO: SA35-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-M1 AP5020

ISO: SA35-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-T1 AP2220

ISO: SA35-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003R-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003R-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003R-S1 AP5020

ISO: SA35-3003R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003L-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA35-3003L-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA35-3003L-S1 AP5020

ISO: SA35-3003L-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M2 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SE24-4004N-M2 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: SE24-4004N-M2 AP5020

ISO: SE24-4004N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M2 AM5040 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN

ARNO ROUSE SE24-4004N-M2 AM5040 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN

ANSI: SE24-4004N-M2 AM5040

ISO: SE24-4004N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4004N-M3 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SE24-4004N-M3 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN

ANSI: SE24-4004N-M3 AP5020

ISO: SE24-4004N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ARNO ROUSE SA24-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ANSI: SA24-4004N-S1 AM5040

ISO: SA24-4004N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ISCAR TAGB 1050Y IC8250 Grooving,Groove Turning Insert 0.197 Corner Radius 0.394 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 1050Y IC8250 Grooving,Groove Turning Insert 0.197 Corner Radius 0.394 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 1050Y IC8250

ISO: TAGB 1050Y IC8250

$28.27
Picture of ISCAR TGMF 635-080 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 635-080 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 635-080 IC8250

ISO: TGMF 635-080 IC8250

$28.15
Picture of ISCAR TGMA 608K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ISCAR TGMA 608K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TGMA 608K IC5010

ISO: TGMA 608K IC5010

$28.15
Picture of TUNGALOY WGE20 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

TUNGALOY WGE20 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

ANSI: WGE20 T9225

ISO: WGE20 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

TUNGALOY WGE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

ANSI: WGE30 T9225

ISO: WGE30 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 AH7025

ISO: DTI4-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 AH725

ISO: DTI4-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 GH130

ISO: DTI4-040 GH130

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP2240

ISO: SA24-3003R-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP2240

ISO: SA24-3003L-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP2240

ISO: SA24-3003N-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP2240

ISO: SA24-3003N-S1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP2240

ISO: SE24-3003N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ISCAR GIQR 11-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 11-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 11-3.00-R150 IC528

ISO: GIQR 11-3.00-R150 IC528

$27.99
Picture of ISCAR GIQL 11-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 11-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 11-3.00-R150 IC528

ISO: GIQL 11-3.00-R150 IC528

$27.99
Picture of ISCAR GIQR 11-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQR 11-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQR 11-1.20-R060 IC528

ISO: GIQR 11-1.20-R060 IC528

$27.99
Picture of ISCAR GIQL 11-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQL 11-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQL 11-1.20-R060 IC528

ISO: GIQL 11-1.20-R060 IC528

$27.99
Picture of ISCAR GIQR 11-1.80-R090 IC528 Grooving,Groove Turning Insert 0.035 Corner Radius 0.071 Wide TiCN + TiN

ISCAR GIQR 11-1.80-R090 IC528 Grooving,Groove Turning Insert 0.035 Corner Radius 0.071 Wide TiCN + TiN

ANSI: GIQR 11-1.80-R090 IC528

ISO: GIQR 11-1.80-R090 IC528

$27.99
Picture of ISCAR GIQR 11-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQR 11-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQR 11-2.00-R100 IC528

ISO: GIQR 11-2.00-R100 IC528

$27.99
Picture of ISCAR GIQL 11-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQL 11-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQL 11-2.00-R100 IC528

ISO: GIQL 11-2.00-R100 IC528

$27.99
Picture of ISCAR GIQL 11-1.80-R090 IC528 Grooving,Groove Turning Insert 0.035 Corner Radius 0.071 Wide TiCN + TiN

ISCAR GIQL 11-1.80-R090 IC528 Grooving,Groove Turning Insert 0.035 Corner Radius 0.071 Wide TiCN + TiN

ANSI: GIQL 11-1.80-R090 IC528

ISO: GIQL 11-1.80-R090 IC528

$27.99
Picture of INGERSOLL TDA5.00-2.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDA5.00-2.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDA5.00-2.50 K10

ISO: TDA5.00 2.50 K10

$27.96
Picture of INGERSOLL TDA4.78-2.39 K10 Face Grooving,Grooving,Groove Turning Insert 0.188 Wide 0.094 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDA4.78-2.39 K10 Face Grooving,Grooving,Groove Turning Insert 0.188 Wide 0.094 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDA4.78-2.39 K10

ISO: TDA4.78 2.39 K10

$27.96
Picture of ISCAR GIP 1.96-0.15 IC20N Grooving,Groove Turning Insert 0.006 Corner Radius 0.077 Wide

ISCAR GIP 1.96-0.15 IC20N Grooving,Groove Turning Insert 0.006 Corner Radius 0.077 Wide

ANSI: GIP 1.96-0.15 IC20N

ISO: GIP 1.96-0.15 IC20N

$27.92
Picture of TUNGALOY DTE3-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 T515

ISO: DTE3-040 T515

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 AH725

ISO: DTE3-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-020 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE3-020 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: DTE3-020 AH7025

ISO: DTE3-020 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 GH130

ISO: DTE3-040 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR GIQL 8-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQL 8-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQL 8-2.00-R100 IC528

ISO: GIQL 8-2.00-R100 IC528

$27.84
Picture of ISCAR HFPL 3003 IC806 Face Grooving,Grooving,Groove Turning Insert 0.012 Corner Radius 0.118 Wide AlTiN

ISCAR HFPL 3003 IC806 Face Grooving,Grooving,Groove Turning Insert 0.012 Corner Radius 0.118 Wide AlTiN

ANSI: HFPL 3003 IC806

ISO: HFPL 3003 IC806

$27.84
Picture of ISCAR GIQR 8-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQR 8-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQR 8-1.20-R060 IC528

ISO: GIQR 8-1.20-R060 IC528

$27.84
Picture of ISCAR GRIP 3002Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GRIP 3002Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GRIP 3002Y IC808

ISO: GRIP 3002Y IC808

$27.84
Picture of ISCAR HFPR 3003 IC806 Face Grooving,Grooving,Groove Turning Insert 0.012 Corner Radius 0.118 Wide AlTiN

ISCAR HFPR 3003 IC806 Face Grooving,Grooving,Groove Turning Insert 0.012 Corner Radius 0.118 Wide AlTiN

ANSI: HFPR 3003 IC806

ISO: HFPR 3003 IC806

$27.84
Picture of ISCAR GIQR 8-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQR 8-2.00-R100 IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQR 8-2.00-R100 IC528

ISO: GIQR 8-2.00-R100 IC528

$27.84
Picture of ISCAR GRIP 318-040Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.125 Wide TiAlN

ISCAR GRIP 318-040Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.016 Corner Radius 0.125 Wide TiAlN

ANSI: GRIP 318-040Y IC908

ISO: GRIP 318-040Y IC908

$27.84
Picture of ISCAR GIQL 8-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQL 8-1.20-R060 IC528 Grooving,Groove Turning Insert 0.024 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQL 8-1.20-R060 IC528

ISO: GIQL 8-1.20-R060 IC528

$27.84
Picture of ISCAR GRIP 3002Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GRIP 3002Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GRIP 3002Y IC804

ISO: GRIP 3002Y IC804

$27.84
Picture of ISCAR GRIP 3003Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.012 Corner Radius 0.118 Wide TiAlN

ISCAR GRIP 3003Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.012 Corner Radius 0.118 Wide TiAlN

ANSI: GRIP 3003Y IC908

ISO: GRIP 3003Y IC908

$27.84
Picture of ISCAR GRIP 3002Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.118 Wide TiAlN

ISCAR GRIP 3002Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.008 Corner Radius 0.118 Wide TiAlN

ANSI: GRIP 3002Y IC908

ISO: GRIP 3002Y IC908

$27.84
Picture of ISCAR GRIP 3002Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ISCAR GRIP 3002Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ANSI: GRIP 3002Y IC806

ISO: GRIP 3002Y IC806

$27.84
Picture of ISCAR GRIP 318-040Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.125 Wide AlTiN

ISCAR GRIP 318-040Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.125 Wide AlTiN

ANSI: GRIP 318-040Y IC806

ISO: GRIP 318-040Y IC806

$27.84
Picture of ISCAR GIQR 8-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 8-3.00-R150 IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 8-3.00-R150 IC528

ISO: GIQR 8-3.00-R150 IC528

$27.84
Picture of TUNGALOY DTI3-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 AH7025

ISO: DTI3-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 AH725

ISO: DTI3-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 GH130

ISO: DTI3-040 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 8.00-4.00 IC806 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN

ISCAR GIPY 8.00-4.00 IC806 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN

ANSI: GIPY 8.00-4.00 IC806

ISO: GIPY 8.00-4.00 IC806

$27.53