Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of INGERSOLL TDIT5.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT5.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT5.00E-0.80 TT5100

ISO: TDIT5.00E-0.80 TT5100

$33.51
Picture of INGERSOLL TDIT5.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

INGERSOLL TDIT5.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius TiCN

ANSI: TDIT5.00E-0.80 TT7220

ISO: TDIT5.00E-0.80 TT7220

$33.51
Picture of SECO LCMR1603M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR1603M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR1603M0-0300-MP TGP25

ISO: LCMR1603M0-0300-MP TGP25

Call (262) 251-4020 for pricing
Picture of ISCAR GIF 6.00E-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIF 6.00E-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIF 6.00E-3.00 IC20

ISO: GIF 6.00E-3.00 IC20

$33.49
Picture of ISCAR GIP 6.35E-3.18 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ISCAR GIP 6.35E-3.18 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ANSI: GIP 6.35E-3.18 IC20

ISO: GIP 6.35E-3.18 IC20

$33.49
Picture of ISCAR GIP 6.00E-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIP 6.00E-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIP 6.00E-3.00 IC20

ISO: GIP 6.00E-3.00 IC20

$33.49
Picture of ISCAR GIF 4.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.00E-0.80 IC808

ISO: GIF 4.00E-0.80 IC808

$33.41
Picture of ISCAR GIP 3.98-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIP 3.98-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIP 3.98-0.20 IC830

ISO: GIP 3.98-0.20 IC830

$33.41
Picture of ISCAR GIFI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIFI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIFI 4.00E-0.40 IC808

ISO: GIFI 4.00E-0.40 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIP 4.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIP 4.00E-0.80 IC807

ISO: GIP 4.00E-0.80 IC807

$33.41
Picture of ISCAR GIF 3.48-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide AlTiN + TiN

ISCAR GIF 3.48-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide AlTiN + TiN

ANSI: GIF 3.48-0.20 IC830

ISO: GIF 3.48-0.20 IC830

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ISCAR GIP 4.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ANSI: GIP 4.00E-0.40 IC806

ISO: GIP 4.00E-0.40 IC806

$33.41
Picture of ISCAR GIF 4.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIF 4.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIF 4.00E-0.80 IC807

ISO: GIF 4.00E-0.80 IC807

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC804 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GIP 4.00E-0.40 IC804 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GIP 4.00E-0.40 IC804

ISO: GIP 4.00E-0.40 IC804

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIP 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIP 4.00E-0.40 IC808

ISO: GIP 4.00E-0.40 IC808

$33.41
Picture of ISCAR GIPI 4.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ISCAR GIPI 4.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ANSI: GIPI 4.00E-0.40 IC908

ISO: GIPI 4.00E-0.40 IC908

$33.41
Picture of ISCAR GIF 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIF 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIF 4.00E-0.40 IC830

ISO: GIF 4.00E-0.40 IC830

$33.41
Picture of ISCAR GIF 3.48-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiAlN + AlTiN + TiN

ISCAR GIF 3.48-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiAlN + AlTiN + TiN

ANSI: GIF 3.48-0.20 IC808

ISO: GIF 3.48-0.20 IC808

$33.41
Picture of ISCAR GIPI 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIPI 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIPI 4.00E-0.40 IC830

ISO: GIPI 4.00E-0.40 IC830

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN

ISCAR GIP 4.00E-0.40 IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN

ANSI: GIP 4.00E-0.40 IC328

ISO: GIP 4.00E-0.40 IC328

$33.41
Picture of ISCAR GIP 3.74-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.74-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.74-0.20 IC808

ISO: GIP 3.74-0.20 IC808

$33.41
Picture of ISCAR GIF 4.23-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.23-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.23-0.10 IC808

ISO: GIF 4.23-0.10 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN

ISCAR GIP 4.00E-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN

ANSI: GIP 4.00E-0.80 IC908

ISO: GIP 4.00E-0.80 IC908

$33.41
Picture of ISCAR GIP 3.98-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIP 3.98-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIP 3.98-0.20 IC807

ISO: GIP 3.98-0.20 IC807

$33.41
Picture of ISCAR GINI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GINI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GINI 4.00E-0.40 IC808

ISO: GINI 4.00E-0.40 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIP 4.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIP 4.00E-0.80 IC830

ISO: GIP 4.00E-0.80 IC830

$33.41
Picture of ISCAR GIF 3.98-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIF 3.98-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIF 3.98-0.20 IC830

ISO: GIF 3.98-0.20 IC830

$33.41
Picture of ISCAR GIP 4.00E-0.60 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIP 4.00E-0.60 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIP 4.00E-0.60 IC808

ISO: GIP 4.00E-0.60 IC808

$33.41
Picture of ISCAR GIF 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.00E-0.40 IC808

ISO: GIF 4.00E-0.40 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN

ISCAR GIP 4.00E-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN

ANSI: GIP 4.00E-0.80 IC806

ISO: GIP 4.00E-0.80 IC806

$33.41
Picture of ISCAR GIF 4.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIF 4.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIF 4.00E-0.40 IC807

ISO: GIF 4.00E-0.40 IC807

$33.41
Picture of ISCAR GIF 3.98-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIF 3.98-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIF 3.98-0.20 IC808

ISO: GIF 3.98-0.20 IC808

$33.41
Picture of ISCAR GIF 3.74-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiAlN + AlTiN + TiN

ISCAR GIF 3.74-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiAlN + AlTiN + TiN

ANSI: GIF 3.74-0.20 IC808

ISO: GIF 3.74-0.20 IC808

$33.41
Picture of ISCAR GIP 3.98-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.98-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.98-0.20 IC808

ISO: GIP 3.98-0.20 IC808

$33.41
Picture of ISCAR GIF 4.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIF 4.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIF 4.00E-0.80 IC830

ISO: GIF 4.00E-0.80 IC830

$33.41
Picture of ISCAR GIPI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 4.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 4.00E-0.40 IC808

ISO: GIPI 4.00E-0.40 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIP 4.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIP 4.00E-0.60 IC830

ISO: GIP 4.00E-0.60 IC830

$33.41
Picture of ISCAR GIF 6.35-3.18 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ISCAR GIF 6.35-3.18 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ANSI: GIF 6.35-3.18 IC20

ISO: GIF 6.35-3.18 IC20

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIP 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIP 4.00E-0.40 IC830

ISO: GIP 4.00E-0.40 IC830

$33.41
Picture of ISCAR GIFI 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIFI 4.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIFI 4.00E-0.40 IC830

ISO: GIFI 4.00E-0.40 IC830

$33.41
Picture of ISCAR GIF 4.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIF 4.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIF 4.00E-0.60 IC830

ISO: GIF 4.00E-0.60 IC830

$33.41
Picture of ISCAR GIP 4.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIP 4.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIP 4.00E-0.80 IC808

ISO: GIP 4.00E-0.80 IC808

$33.41
Picture of ISCAR GIP 4.23-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiAlN + AlTiN + TiN

ISCAR GIP 4.23-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiAlN + AlTiN + TiN

ANSI: GIP 4.23-0.10 IC808

ISO: GIP 4.23-0.10 IC808

$33.41
Picture of ISCAR GIP 4.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIP 4.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIP 4.00E-0.40 IC807

ISO: GIP 4.00E-0.40 IC807

$33.41
Picture of ISCAR GIP 4.23-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide AlTiN + TiN

ISCAR GIP 4.23-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide AlTiN + TiN

ANSI: GIP 4.23-0.10 IC830

ISO: GIP 4.23-0.10 IC830

$33.41
Picture of ISCAR GIF 3.56-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.140 Wide TiAlN + AlTiN + TiN

ISCAR GIF 3.56-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.140 Wide TiAlN + AlTiN + TiN

ANSI: GIF 3.56-0.20 IC808

ISO: GIF 3.56-0.20 IC808

$33.41
Picture of ISCAR GIP 1.57-0.15 LX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide AlTiN + TiN

ISCAR GIP 1.57-0.15 LX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide AlTiN + TiN

ANSI: GIP 1.57-0.15 LX IC830

ISO: GIP 1.57-0.15 LX IC830

$33.25
Picture of ISCAR GIP 2.00-0.15 RX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.079 Wide AlTiN + TiN

ISCAR GIP 2.00-0.15 RX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.079 Wide AlTiN + TiN

ANSI: GIP 2.00-0.15 RX IC830

ISO: GIP 2.00-0.15 RX IC830

$33.25
Picture of ISCAR GIPI 2.00-0.10RX IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide AlTiN + TiN

ISCAR GIPI 2.00-0.10RX IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide AlTiN + TiN

ANSI: GIPI 2.00-0.10RX IC830

ISO: GIPI 2.00-0.10RX IC830

$33.25
Picture of ISCAR GIP 2.00-0.15 LX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.079 Wide AlTiN + TiN

ISCAR GIP 2.00-0.15 LX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.079 Wide AlTiN + TiN

ANSI: GIP 2.00-0.15 LX IC830

ISO: GIP 2.00-0.15 LX IC830

$33.25
Picture of ISCAR GIPI 1.00-0.00LX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ISCAR GIPI 1.00-0.00LX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ANSI: GIPI 1.00-0.00LX IC830

ISO: GIPI 1.00-0.00LX IC830

$33.25
Picture of ISCAR GIP 1.00-0.00RX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ISCAR GIP 1.00-0.00RX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ANSI: GIP 1.00-0.00RX IC830

ISO: GIP 1.00-0.00RX IC830

$33.25
Picture of ISCAR GIPI 2.00-0.10LX IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide AlTiN + TiN

ISCAR GIPI 2.00-0.10LX IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide AlTiN + TiN

ANSI: GIPI 2.00-0.10LX IC830

ISO: GIPI 2.00-0.10LX IC830

$33.25
Picture of ISCAR GIPI 2.39-0.2LX IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 2.39-0.2LX IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 2.39-0.2LX IC808

ISO: GIPI 2.39-0.2LX IC808

$33.25
Picture of ISCAR GIPI 1.00-0.00RX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ISCAR GIPI 1.00-0.00RX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ANSI: GIPI 1.00-0.00RX IC830

ISO: GIPI 1.00-0.00RX IC830

$33.25
Picture of ISCAR GIP 1.57-0.15 RX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide AlTiN + TiN

ISCAR GIP 1.57-0.15 RX IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide AlTiN + TiN

ANSI: GIP 1.57-0.15 RX IC830

ISO: GIP 1.57-0.15 RX IC830

$33.25
Picture of ISCAR GIP 1.19-0.1RX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.047 Wide TiAlN + AlTiN + TiN

ISCAR GIP 1.19-0.1RX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.047 Wide TiAlN + AlTiN + TiN

ANSI: GIP 1.19-0.1RX IC808

ISO: GIP 1.19-0.1RX IC808

$33.25
Picture of ISCAR GIP 1.00-0.00LX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ISCAR GIP 1.00-0.00LX IC830 Grooving,Groove Turning Insert 0.039 Wide AlTiN + TiN

ANSI: GIP 1.00-0.00LX IC830

ISO: GIP 1.00-0.00LX IC830

$33.25
Picture of ISCAR GIPI 1.57-0.15LX IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 1.57-0.15LX IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 1.57-0.15LX IC808

ISO: GIPI 1.57-0.15LX IC808

$33.25
Picture of ISCAR GIPI 1.19-0.1LX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.047 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 1.19-0.1LX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.047 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 1.19-0.1LX IC808

ISO: GIPI 1.19-0.1LX IC808

$33.25
Picture of TUNGALOY DTI400-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

TUNGALOY DTI400-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

ANSI: DTI400-080 NS9530

ISO: DTI400-080 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI400-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: DTI400-040 NS9530

ISO: DTI400-040 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR TAGB 1208Y IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.472 Wide TiAlN + AlTiN + TiN

ISCAR TAGB 1208Y IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.472 Wide TiAlN + AlTiN + TiN

ANSI: TAGB 1208Y IC808

ISO: TAGB 1208Y IC808

$33.14
Picture of SECO LCMR160504-0500-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMR160504-0500-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMR160504-0500-MC CP600

ISO: LCMR160504-0500-MC CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMR160504-0500-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMR160504-0500-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMR160504-0500-MT CP500

ISO: LCMR160504-0500-MT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCMR160504-0500-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMR160504-0500-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMR160504-0500-FT CP500

ISO: LCMR160504-0500-FT CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 4.00E-2.00 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR GIP 4.00E-2.00 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: GIP 4.00E-2.00 IC428

ISO: GIP 4.00E-2.00 IC428

$33.10
Picture of SECO LCMR160504-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160504-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160504-0500-MT TGP25

ISO: LCMR160504-0500-MT TGP25

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2003N-ALU AP5115 Grooving,Groove Turning Insert 0.079 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-2003N-ALU AP5115 Grooving,Groove Turning Insert 0.079 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-2003N-ALU AP5115

ISO: SA24-2003N-ALU AP5115

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002L-T1-15 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002L-T1-15 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002L-T1-15 AP5020

ISO: SA24-3002L-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of SECO LCMR160504-0500-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160504-0500-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160504-0500-FT TGP25

ISO: LCMR160504-0500-FT TGP25

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 1.57-0.79 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAlN + AlTiN + TiN

ISCAR GIP 1.57-0.79 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAlN + AlTiN + TiN

ANSI: GIP 1.57-0.79 IC808

ISO: GIP 1.57-0.79 IC808

$32.87
Picture of ISCAR GIP 2.00-1.00 IC830 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide AlTiN + TiN

ISCAR GIP 2.00-1.00 IC830 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide AlTiN + TiN

ANSI: GIP 2.00-1.00 IC830

ISO: GIP 2.00-1.00 IC830

$32.87
Picture of ISCAR GIP 2.00-1.00 IC807 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR GIP 2.00-1.00 IC807 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: GIP 2.00-1.00 IC807

ISO: GIP 2.00-1.00 IC807

$32.87
Picture of ISCAR GIP 2.39-1.20 IC807 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAIN + TiN

ISCAR GIP 2.39-1.20 IC807 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAIN + TiN

ANSI: GIP 2.39-1.20 IC807

ISO: GIP 2.39-1.20 IC807

$32.87
Picture of ISCAR GIP 1.00-0.50 IC807 Grooving,Groove Turning Insert 0.020 Corner Radius 0.039 Wide TiAIN + TiN

ISCAR GIP 1.00-0.50 IC807 Grooving,Groove Turning Insert 0.020 Corner Radius 0.039 Wide TiAIN + TiN

ANSI: GIP 1.00-0.50 IC807

ISO: GIP 1.00-0.50 IC807

$32.87
Picture of ISCAR GIP 1.57-0.79 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide AlTiN + TiN

ISCAR GIP 1.57-0.79 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide AlTiN + TiN

ANSI: GIP 1.57-0.79 IC830

ISO: GIP 1.57-0.79 IC830

$32.87
Picture of ISCAR GIP 2.39-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.39-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.39-1.20 IC808

ISO: GIP 2.39-1.20 IC808

$32.87
Picture of ISCAR GIP 1.57-0.79 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAIN + TiN

ISCAR GIP 1.57-0.79 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAIN + TiN

ANSI: GIP 1.57-0.79 IC807

ISO: GIP 1.57-0.79 IC807

$32.87
Picture of ISCAR GIP 1.57-0.79 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAlN

ISCAR GIP 1.57-0.79 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.062 Wide TiAlN

ANSI: GIP 1.57-0.79 IC908

ISO: GIP 1.57-0.79 IC908

$32.87
Picture of ISCAR GIPI 2.39-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 2.39-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 2.39-1.20 IC808

ISO: GIPI 2.39-1.20 IC808

$32.87
Picture of ISCAR GIP 2.00-1.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide AlTiN

ISCAR GIP 2.00-1.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide AlTiN

ANSI: GIP 2.00-1.00 IC806

ISO: GIP 2.00-1.00 IC806

$32.87
Picture of ISCAR GIP 2.00-1.00 IC808 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.00-1.00 IC808 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.00-1.00 IC808

ISO: GIP 2.00-1.00 IC808

$32.87
Picture of ISCAR GIPI 2.39-1.20 IC830 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide AlTiN + TiN

ISCAR GIPI 2.39-1.20 IC830 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide AlTiN + TiN

ANSI: GIPI 2.39-1.20 IC830

ISO: GIPI 2.39-1.20 IC830

$32.87
Picture of ISCAR GIP 1.00-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.039 Wide TiAlN + AlTiN + TiN

ISCAR GIP 1.00-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.039 Wide TiAlN + AlTiN + TiN

ANSI: GIP 1.00-0.50 IC808

ISO: GIP 1.00-0.50 IC808

$32.87
Picture of ISCAR GIP 1.40-0.70 IC808 Grooving,Groove Turning Insert 0.028 Corner Radius 0.055 Wide TiAlN + AlTiN + TiN

ISCAR GIP 1.40-0.70 IC808 Grooving,Groove Turning Insert 0.028 Corner Radius 0.055 Wide TiAlN + AlTiN + TiN

ANSI: GIP 1.40-0.70 IC808

ISO: GIP 1.40-0.70 IC808

$32.87
Picture of ISCAR GEPI 2.00-1.00UL IC08 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide

ISCAR GEPI 2.00-1.00UL IC08 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide

ANSI: GEPI 2.00-1.00UL IC08

ISO: GEPI 2.00-1.00UL IC08

$32.79
Picture of ISCAR GEPI 2.00-1.00UR IC08 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide

ISCAR GEPI 2.00-1.00UR IC08 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide

ANSI: GEPI 2.00-1.00UR IC08

ISO: GEPI 2.00-1.00UR IC08

$32.79
Picture of TUNGALOY DTE300-020 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE300-020 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

ANSI: DTE300-020 NS9530

ISO: DTE300-020 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE315-015 NS9530 Clamp Down Grooving,Groove Turning Insert 0.005 Corner Radius 0.124 Wide

TUNGALOY DTE315-015 NS9530 Clamp Down Grooving,Groove Turning Insert 0.005 Corner Radius 0.124 Wide

ANSI: DTE315-015 NS9530

ISO: DTE315-015 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE300-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: DTE300-040 NS9530

ISO: DTE300-040 NS9530

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDA8.00-4.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.157 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDA8.00-4.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.157 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDA8.00-4.00 K10

ISO: TDA8.00 4.00 K10

$32.75
Picture of ISCAR SCIL 22-AL00-25K16 IC07 Groove Turning,Turning Insert

ISCAR SCIL 22-AL00-25K16 IC07 Groove Turning,Turning Insert

ANSI: SCIL 22-AL00-25K16 IC07

ISO: SCIL 22-AL00-25K16 IC07

$32.71
Picture of ISCAR GIPI 2.70-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 2.70-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 2.70-0.15 IC808

ISO: GIPI 2.70-0.15 IC808

$32.71
Picture of ISCAR GIPI 3.18-0.20 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN

ISCAR GIPI 3.18-0.20 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN

ANSI: GIPI 3.18-0.20 IC908

ISO: GIPI 3.18-0.20 IC908

$32.71
Picture of ISCAR GIPI 3.18-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 3.18-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 3.18-0.20 IC808

ISO: GIPI 3.18-0.20 IC808

$32.71
Picture of ISCAR GIP 3.18-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAIN + TiN

ISCAR GIP 3.18-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAIN + TiN

ANSI: GIP 3.18-0.20 IC807

ISO: GIP 3.18-0.20 IC807

$32.71
Picture of ISCAR GIP 2.87-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.113 Wide AlTiN + TiN

ISCAR GIP 2.87-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.113 Wide AlTiN + TiN

ANSI: GIP 2.87-0.20 IC830

ISO: GIP 2.87-0.20 IC830

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC806 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ISCAR GIP 3.00E-0.20 IC806 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ANSI: GIP 3.00E-0.20 IC806

ISO: GIP 3.00E-0.20 IC806

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ISCAR GIP 3.00E-0.20 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ANSI: GIP 3.00E-0.20 IC908

ISO: GIP 3.00E-0.20 IC908

$32.71
Picture of ISCAR GIP 3.18-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide AlTiN + TiN

ISCAR GIP 3.18-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide AlTiN + TiN

ANSI: GIP 3.18-0.20 IC830

ISO: GIP 3.18-0.20 IC830

$32.71
Picture of ISCAR GIPI 3.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIPI 3.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIPI 3.00E-0.40 IC830

ISO: GIPI 3.00E-0.40 IC830

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC804 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GIP 3.00E-0.20 IC804 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GIP 3.00E-0.20 IC804

ISO: GIP 3.00E-0.20 IC804

$32.71
Picture of ISCAR GIP 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.00E-0.40 IC808

ISO: GIP 3.00E-0.40 IC808

$32.71
Picture of ISCAR GIP 3.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ISCAR GIP 3.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ANSI: GIP 3.00E-0.40 IC908

ISO: GIP 3.00E-0.40 IC908

$32.71
Picture of ISCAR GEPI 3.18-1.59 IC908 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiAlN

ISCAR GEPI 3.18-1.59 IC908 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiAlN

ANSI: GEPI 3.18-1.59 IC908

ISO: GEPI 3.18-1.59 IC908

$32.71
Picture of ISCAR GIP 2.87-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.113 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.87-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.113 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.87-0.20 IC808

ISO: GIP 2.87-0.20 IC808

$32.71
Picture of ISCAR SCIL 22-AD08-24K8 IC07 Groove Turning,Turning Insert 0.003 Corner Radius 0.094 Wide

ISCAR SCIL 22-AD08-24K8 IC07 Groove Turning,Turning Insert 0.003 Corner Radius 0.094 Wide

ANSI: SCIL 22-AD08-24K8 IC07

ISO: SCIL 22-AD08-24K8 IC07

$32.71
Picture of ISCAR GIP 2.70-0.10 IC807 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAIN + TiN

ISCAR GIP 2.70-0.10 IC807 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAIN + TiN

ANSI: GIP 2.70-0.10 IC807

ISO: GIP 2.70-0.10 IC807

$32.71
Picture of ISCAR GIPI 2.50-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide AlTiN + TiN

ISCAR GIPI 2.50-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide AlTiN + TiN

ANSI: GIPI 2.50-0.20 IC830

ISO: GIPI 2.50-0.20 IC830

$32.71
Picture of ISCAR GIP 3.15-0.15 IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.124 Wide AlTiN + TiN

ISCAR GIP 3.15-0.15 IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.124 Wide AlTiN + TiN

ANSI: GIP 3.15-0.15 IC830

ISO: GIP 3.15-0.15 IC830

$32.71
Picture of ISCAR GIPI 2.70-0.15 IC908 Grooving,Groove Turning Insert 0.006 Corner Radius 0.106 Wide TiAlN

ISCAR GIPI 2.70-0.15 IC908 Grooving,Groove Turning Insert 0.006 Corner Radius 0.106 Wide TiAlN

ANSI: GIPI 2.70-0.15 IC908

ISO: GIPI 2.70-0.15 IC908

$32.71
Picture of ISCAR GIPI 3.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ISCAR GIPI 3.00E-0.40 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ANSI: GIPI 3.00E-0.40 IC908

ISO: GIPI 3.00E-0.40 IC908

$32.71
Picture of ISCAR GIPI 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 3.00E-0.40 IC808

ISO: GIPI 3.00E-0.40 IC808

$32.71
Picture of ISCAR GIP 3.15-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.124 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.15-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.124 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.15-0.15 IC808

ISO: GIP 3.15-0.15 IC808

$32.71
Picture of ISCAR GIP 3.00-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.00-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.00-0.20 IC808

ISO: GIP 3.00-0.20 IC808

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.00E-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.00E-0.20 IC808

ISO: GIP 3.00E-0.20 IC808

$32.71
Picture of ISCAR GIP 2.70-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide AlTiN + TiN

ISCAR GIP 2.70-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide AlTiN + TiN

ANSI: GIP 2.70-0.10 IC830

ISO: GIP 2.70-0.10 IC830

$32.71
Picture of ISCAR GIP 3.00-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR GIP 3.00-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: GIP 3.00-0.20 IC807

ISO: GIP 3.00-0.20 IC807

$32.71
Picture of ISCAR GIP 3.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ISCAR GIP 3.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ANSI: GIP 3.00E-0.40 IC806

ISO: GIP 3.00E-0.40 IC806

$32.71
Picture of ISCAR GEPI 3.00-1.50 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ISCAR GEPI 3.00-1.50 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ANSI: GEPI 3.00-1.50 IC908

ISO: GEPI 3.00-1.50 IC908

$32.71
Picture of ISCAR GIP 2.47-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.47-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.47-0.20 IC808

ISO: GIP 2.47-0.20 IC808

$32.71
Picture of ISCAR SCIR22-BRA00-05K8 IC07 Groove Turning,Turning Square Back Turning Carbide

ISCAR SCIR22-BRA00-05K8 IC07 Groove Turning,Turning Square Back Turning Carbide

ANSI: SCIR22-BRA00-05K8 IC07

ISO: SCIR22-BRA00-05K8 IC07

$32.71
Picture of ISCAR GIP 2.70-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.70-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.70-0.10 IC808

ISO: GIP 2.70-0.10 IC808

$32.71
Picture of ISCAR GIPI 3.30-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide AlTiN + TiN

ISCAR GIPI 3.30-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide AlTiN + TiN

ANSI: GIPI 3.30-0.10 IC830

ISO: GIPI 3.30-0.10 IC830

$32.71
Picture of ISCAR GIP 3.18-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.18-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.18-0.20 IC808

ISO: GIP 3.18-0.20 IC808

$32.71
Picture of ISCAR SCIR22-ERA00-08K0 IC07 Groove Turning,Turning Square Carbide

ISCAR SCIR22-ERA00-08K0 IC07 Groove Turning,Turning Square Carbide

ANSI: SCIR22-ERA00-08K0 IC07

ISO: SCIR22-ERA00-08K0 IC07

$32.71
Picture of ISCAR SCIR 22-AR00-25K16 IC07 Cut Off, Grooving,Groove Turning Insert

ISCAR SCIR 22-AR00-25K16 IC07 Cut Off, Grooving,Groove Turning Insert

ANSI: SCIR 22-AR00-25K16 IC07

ISO: SCIR 22-AR00-25K16 IC07

$32.71
Picture of ISCAR GIPI 2.70-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide AlTiN + TiN

ISCAR GIPI 2.70-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide AlTiN + TiN

ANSI: GIPI 2.70-0.10 IC830

ISO: GIPI 2.70-0.10 IC830

$32.71
Picture of ISCAR GIPI 2.70-0.10 IC908 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN

ISCAR GIPI 2.70-0.10 IC908 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN

ANSI: GIPI 2.70-0.10 IC908

ISO: GIPI 2.70-0.10 IC908

$32.71
Picture of ISCAR GEPI 3.00-1.50 IC528 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GEPI 3.00-1.50 IC528 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GEPI 3.00-1.50 IC528

ISO: GEPI 3.00-1.50 IC528

$32.71
Picture of ISCAR GIP 2.47-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiAIN + TiN

ISCAR GIP 2.47-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiAIN + TiN

ANSI: GIP 2.47-0.20 IC807

ISO: GIP 2.47-0.20 IC807

$32.71
Picture of ISCAR SCIR22-AR10-25K8 IC07 Groove Turning,Turning Square Carbide 0.004 Corner Radius

ISCAR SCIR22-AR10-25K8 IC07 Groove Turning,Turning Square Carbide 0.004 Corner Radius

ANSI: SCIR22-AR10-25K8 IC07

ISO: SCIR22-AR10-25K8 IC07

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR GIP 3.00E-0.20 IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: GIP 3.00E-0.20 IC807

ISO: GIP 3.00E-0.20 IC807

$32.71
Picture of ISCAR GIP 3.00E-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIP 3.00E-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIP 3.00E-0.20 IC830

ISO: GIP 3.00E-0.20 IC830

$32.71
Picture of ISCAR GIP 3.00-0.00 IC808 Grooving,Groove Turning Insert 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.00-0.00 IC808 Grooving,Groove Turning Insert 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.00-0.00 IC808

ISO: GIP 3.00-0.00 IC808

$32.71
Picture of ISCAR GIPI 2.70-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 2.70-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 2.70-0.10 IC808

ISO: GIPI 2.70-0.10 IC808

$32.71
Picture of ISCAR GIP 3.30-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide AlTiN + TiN

ISCAR GIP 3.30-0.10 IC830 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide AlTiN + TiN

ANSI: GIP 3.30-0.10 IC830

ISO: GIP 3.30-0.10 IC830

$32.71
Picture of ISCAR SCIR 22-AD08-24K8 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide

ISCAR SCIR 22-AD08-24K8 IC07 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide

ANSI: SCIR 22-AD08-24K8 IC07

ISO: SCIR 22-AD08-24K8 IC07

$32.71
Picture of ISCAR GIPI 3.30-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 3.30-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 3.30-0.10 IC808

ISO: GIPI 3.30-0.10 IC808

$32.71
Picture of ISCAR GIP 3.00E-0.00 IC830 Grooving,Groove Turning Insert 0.118 Wide AlTiN + TiN

ISCAR GIP 3.00E-0.00 IC830 Grooving,Groove Turning Insert 0.118 Wide AlTiN + TiN

ANSI: GIP 3.00E-0.00 IC830

ISO: GIP 3.00E-0.00 IC830

$32.71
Picture of ISCAR GIP 3.00-0.20 IC806 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ISCAR GIP 3.00-0.20 IC806 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ANSI: GIP 3.00-0.20 IC806

ISO: GIP 3.00-0.20 IC806

$32.71
Picture of ISCAR GIP 3.30-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide TiAlN + AlTiN + TiN

ISCAR GIP 3.30-0.10 IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide TiAlN + AlTiN + TiN

ANSI: GIP 3.30-0.10 IC808

ISO: GIP 3.30-0.10 IC808

$32.71
Picture of ISCAR GINI 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GINI 3.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GINI 3.00E-0.40 IC808

ISO: GINI 3.00E-0.40 IC808

$32.71
Picture of ISCAR GIPI 3.18-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide AlTiN + TiN

ISCAR GIPI 3.18-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide AlTiN + TiN

ANSI: GIPI 3.18-0.20 IC830

ISO: GIPI 3.18-0.20 IC830

$32.71
Picture of ISCAR GIP 3.00-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIP 3.00-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIP 3.00-0.20 IC830

ISO: GIP 3.00-0.20 IC830

$32.71
Picture of ISCAR GIP 2.70-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ISCAR GIP 2.70-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiAlN + AlTiN + TiN

ANSI: GIP 2.70-0.20 IC808

ISO: GIP 2.70-0.20 IC808

$32.71
Picture of ISCAR GIP 3.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR GIP 3.00E-0.40 IC807 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: GIP 3.00E-0.40 IC807

ISO: GIP 3.00E-0.40 IC807

$32.71
Picture of ISCAR GIP 3.00-0.00 IC830 Grooving,Groove Turning Insert 0.118 Wide AlTiN + TiN

ISCAR GIP 3.00-0.00 IC830 Grooving,Groove Turning Insert 0.118 Wide AlTiN + TiN

ANSI: GIP 3.00-0.00 IC830

ISO: GIP 3.00-0.00 IC830

$32.71
Picture of ISCAR GIP 3.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIP 3.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIP 3.00E-0.40 IC830

ISO: GIP 3.00E-0.40 IC830

$32.71
Picture of ISCAR GIP 2.47-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide AlTiN + TiN

ISCAR GIP 2.47-0.20 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide AlTiN + TiN

ANSI: GIP 2.47-0.20 IC830

ISO: GIP 2.47-0.20 IC830

$32.71
Picture of ARNO ROUSE SA16-3002L-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA16-3002L-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SA16-3002L-S1-12 AM5040

ISO: SA16-3002L-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA16-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SA16-3002R-S1-12 AM5040

ISO: SA16-3002R-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-S1-8 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502R-S1-8 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502R-S1-8 AP5020

ISO: SA24-2502R-S1-8 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502L-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502L-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502L-S1 AP5020

ISO: SA24-2502L-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-2502R-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-2502R-S1 AM5040

ISO: SA24-2502R-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502L-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-2502L-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-2502L-S1 AM5040

ISO: SA24-2502L-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-3002R-S1-12 AM5040

ISO: SA24-3002R-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502L-S1-8 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502L-S1-8 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502L-S1-8 AP5020

ISO: SA24-2502L-S1-8 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502R-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502R-S1 AP5020

ISO: SA24-2502R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502L-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502L-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502L-T1 AP5020

ISO: SA24-2502L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 AH7025

ISO: DTR5-250 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 AH725

ISO: DTR5-250 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 GH130

ISO: DTR5-250 GH130

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-T1 AP2240 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-T1 AP2240

ISO: SA24-3003N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-4020N-RP1 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.078 Corner Radius TiCN

ARNO ROUSE SE24-4020N-RP1 AP5020 Grooving,Groove Turning Insert 0.157 Wide 0.078 Corner Radius TiCN

ANSI: SE24-4020N-RP1 AP5020

ISO: SE24-4020N-RP1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1501R-S1-12 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-1501R-S1-12 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.004 Corner Radius TiCN

ANSI: SA24-1501R-S1-12 AP5020

ISO: SA24-1501R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 AH905 Clamp Down Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 AH905

ISO: DTR5-250 AH905

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 NS9530

ISO: DTI300-040 NS9530

Call (262) 251-4020 for pricing
Picture of SECO LCEX110502-0150R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110502-0150R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110502-0150R

ISO: LCEX110502-0150R

Call (262) 251-4020 for pricing
Picture of SECO LCEX110502-0150L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110502-0150L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110502-0150L

ISO: LCEX110502-0150L CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 6.35E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ISCAR GIP 6.35E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ANSI: GIP 6.35E-0.80 IC20

ISO: GIP 6.35E-0.80 IC20

$32.25
Picture of ISCAR GIF 6.35-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide

ISCAR GIF 6.35-0.50 IC20 Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide

ANSI: GIF 6.35-0.50 IC20

ISO: GIF 6.35-0.50 IC20

$32.25
Picture of ISCAR GIP 6.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide

ISCAR GIP 6.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide

ANSI: GIP 6.00E-1.20 IC20

ISO: GIP 6.00E-1.20 IC20

$32.25
Picture of ISCAR GIF 6.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide

ISCAR GIF 6.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide

ANSI: GIF 6.00E-1.20 IC20

ISO: GIF 6.00E-1.20 IC20

$32.25
Picture of ISCAR GIP 6.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide

ISCAR GIP 6.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide

ANSI: GIP 6.00E-0.80 IC20

ISO: GIP 6.00E-0.80 IC20

$32.25
Picture of ISCAR GIF 6.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide

ISCAR GIF 6.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide

ANSI: GIF 6.00E-0.40 IC20

ISO: GIF 6.00E-0.40 IC20

$32.25
Picture of ISCAR GIF 6.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide

ISCAR GIF 6.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide

ANSI: GIF 6.00E-0.80 IC20

ISO: GIF 6.00E-0.80 IC20

$32.25
Picture of ISCAR GIPI 6.35E-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide

ISCAR GIPI 6.35E-0.55 IC20 Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide

ANSI: GIPI 6.35E-0.55 IC20

ISO: GIPI 6.35E-0.55 IC20

$32.25
Picture of ARNO ROUSE SA16-2001L-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA16-2001L-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA16-2001L-T1-15 AP5020

ISO: SA16-2001L-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2001R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA16-2001R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA16-2001R-T1-15 AP5020

ISO: SA16-2001R-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001R-S1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001R-S1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001R-S1-15 AP5020

ISO: SA24-2001R-S1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2001L-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ARNO ROUSE SA16-2001L-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ANSI: SA16-2001L-S1-12 AM5040

ISO: SA16-2001L-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001L-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001L-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001L-T1-15 AP5020

ISO: SA24-2001L-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001R-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ARNO ROUSE SA24-2001R-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ANSI: SA24-2001R-S1-12 AM5040

ISO: SA24-2001R-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001L-S1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001L-S1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001L-S1-15 AP5020

ISO: SA24-2001L-S1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE SA24-2000R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: SA24-2000R-T1-15 AP5020

ISO: SA24-2000R-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.197 Wide

TUNGALOY WGE50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.197 Wide

ANSI: WGE50 T9225

ISO: WGE50 T9225

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002R-S1-8 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002R-S1-8 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002R-S1-8 AP5020

ISO: SA24-2002R-S1-8 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2001R-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ARNO ROUSE SA16-2001R-S1-12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius AlTiN

ANSI: SA16-2001R-S1-12 AM5040

ISO: SA16-2001R-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001R-T1-15 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001R-T1-15 AP5020

ISO: SA24-2001R-T1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002L-S1-8 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002L-S1-8 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002L-S1-8 AP5020

ISO: SA24-2002L-S1-8 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GRIP 476-080Y IC418 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.187 Wide TIC + Al2O3

ISCAR GRIP 476-080Y IC418 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.187 Wide TIC + Al2O3

ANSI: GRIP 476-080Y IC418

ISO: GRIP 476-080Y IC418

$32.09
Picture of ISCAR GRIP 476-080Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.031 Corner Radius 0.187 Wide AlTiN

ISCAR GRIP 476-080Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.031 Corner Radius 0.187 Wide AlTiN

ANSI: GRIP 476-080Y IC806

ISO: GRIP 476-080Y IC806

$32.09
Picture of ISCAR HFPR 5004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ISCAR HFPR 5004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ANSI: HFPR 5004 IC806

ISO: HFPR 5004 IC806

$32.09
Picture of ISCAR GRIP 5005Y IC418 Grooving,Groove Turning,Face Grooving Insert 0.020 Corner Radius 0.197 Wide TIC + Al2O3

ISCAR GRIP 5005Y IC418 Grooving,Groove Turning,Face Grooving Insert 0.020 Corner Radius 0.197 Wide TIC + Al2O3

ANSI: GRIP 5005Y IC418

ISO: GRIP 5005Y IC418

$32.09
Picture of ISCAR GRIP 5005Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ISCAR GRIP 5005Y IC804 Face Grooving,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ANSI: GRIP 5005Y IC804

ISO: GRIP 5005Y IC804

$32.09
Picture of ISCAR HFPL 5004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ISCAR HFPL 5004 IC806 Face Grooving,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ANSI: HFPL 5004 IC806

ISO: HFPL 5004 IC806

$32.09
Picture of ISCAR GRIP 5008Y IC830 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GRIP 5008Y IC830 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GRIP 5008Y IC830

ISO: GRIP 5008Y IC830

$32.09
Picture of ISCAR GRIP 5008Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ISCAR GRIP 5008Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ANSI: GRIP 5008Y IC806

ISO: GRIP 5008Y IC806

$32.09