Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR GIFI 4.00E-2.00 IC8250 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 4.00E-2.00 IC8250 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 4.00E-2.00 IC8250

ISO: GIFI 4.00E-2.00 IC8250

$37.82
Picture of ISCAR GIP 3.98-1.99 IC8250 Cut Off,Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.98-1.99 IC8250 Cut Off,Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.98-1.99 IC8250

ISO: GIP 3.98-1.99 IC8250

$37.82
Picture of ISCAR GIP 4.00E-2.00 IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-2.00 IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-2.00 IC8250

ISO: GIP 4.00E-2.00 IC8250

$37.82
Picture of ISCAR GIP 4.00E-2.00 IC5010 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-2.00 IC5010 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-2.00 IC5010

ISO: GIP 4.00E-2.00 IC5010

$37.82
Picture of ISCAR GDMN 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMN 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMN 808 IC830

ISO: GDMN 808 IC830

$37.74
Picture of ISCAR GDMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMF 808 IC808

ISO: GDMF 808 IC808

$37.74
Picture of ISCAR GDMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMY 808 IC808

ISO: GDMY 808 IC808

$37.74
Picture of ISCAR GDMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMY 808 IC830

ISO: GDMY 808 IC830

$37.74
Picture of ISCAR GDMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMF 808 IC830

ISO: GDMF 808 IC830

$37.74
Picture of ISCAR GDMN 808 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ISCAR GDMN 808 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ANSI: GDMN 808 IC907

ISO: GDMN 808 IC907

$37.74
Picture of ISCAR GDMU 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMU 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMU 808 IC830

ISO: GDMU 808 IC830

$37.74
Picture of ISCAR GDMN 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMN 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMN 808 IC808

ISO: GDMN 808 IC808

$37.74
Picture of SECO LCEX0804-AG60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-AG60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-AG60L

ISO: LCEX0804-AG60L

Call (262) 251-4020 for pricing
Picture of SECO LCEX0804-A60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-A60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-A60L

ISO: LCEX0804-A60L

Call (262) 251-4020 for pricing
Picture of SECO LCEX0804-G60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-G60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-G60R

ISO: LCEX0804-G60R

Call (262) 251-4020 for pricing
Picture of SECO LCEX0804-A60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-A60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-A60R

ISO: LCEX0804-A60R

Call (262) 251-4020 for pricing
Picture of SECO LCEX0804-G60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-G60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-G60L

ISO: LCEX0804-G60L

Call (262) 251-4020 for pricing
Picture of SECO LCEX0804-AG60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX0804-AG60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX0804-AG60R

ISO: LCEX0804-AG60R

Call (262) 251-4020 for pricing
Picture of ISCAR GDMA 840 IC507 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + TiN

ISCAR GDMA 840 IC507 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + TiN

ANSI: GDMA 840 IC507

ISO: GDMA 840 IC507

$37.51
Picture of INGERSOLL TDIT6.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.031 Corner Radius TiCN

INGERSOLL TDIT6.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.031 Corner Radius TiCN

ANSI: TDIT6.00E-0.80 TT7220

ISO: TDIT6.00E-0.80 TT7220

$37.47
Picture of INGERSOLL TDIT6.00E-1.20 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.047 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT6.00E-1.20 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.047 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT6.00E-1.20 TT5100

ISO: TDIT6.00E-1.20 TT5100

$37.47
Picture of INGERSOLL TDIT6.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT6.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT6.00E-0.80 TT5100

ISO: TDIT6.00E-0.80 TT5100

$37.47
Picture of TUNGALOY DTE500-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

TUNGALOY DTE500-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: DTE500-080 NS9530

ISO: DTE500-080 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE500-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY DTE500-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: DTE500-040 NS9530

ISO: DTE500-040 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE478-055 NS9530 Clamp Down Grooving,Groove Turning Insert 0.021 Corner Radius 0.188 Wide

TUNGALOY DTE478-055 NS9530 Clamp Down Grooving,Groove Turning Insert 0.021 Corner Radius 0.188 Wide

ANSI: DTE478-055 NS9530

ISO: DTE478-055 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 5.00E-0.60 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIP 5.00E-0.60 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIP 5.00E-0.60 IC808

ISO: GIP 5.00E-0.60 IC808

$37.35
Picture of ISCAR GIF 4.45-0.15 IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide AlTiN + TiN

ISCAR GIF 4.45-0.15 IC830 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide AlTiN + TiN

ANSI: GIF 4.45-0.15 IC830

ISO: GIF 4.45-0.15 IC830

$37.35
Picture of ISCAR GIPI 5.00E-0.50 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIPI 5.00E-0.50 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIPI 5.00E-0.50 IC830

ISO: GIPI 5.00E-0.50 IC830

$37.35
Picture of ISCAR GIF 5.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAIN + TiN

ISCAR GIF 5.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAIN + TiN

ANSI: GIF 5.00E-0.80 IC807

ISO: GIF 5.00E-0.80 IC807

$37.35
Picture of ISCAR GIF 5.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIF 5.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIF 5.00E-0.80 IC808

ISO: GIF 5.00E-0.80 IC808

$37.35
Picture of ISCAR GIP 5.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIP 5.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIP 5.00E-0.40 IC830

ISO: GIP 5.00E-0.40 IC830

$37.35
Picture of ISCAR GIP 5.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIP 5.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIP 5.00E-0.60 IC830

ISO: GIP 5.00E-0.60 IC830

$37.35
Picture of ISCAR GIF 5.36-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide TiAlN + AlTiN + TiN

ISCAR GIF 5.36-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide TiAlN + AlTiN + TiN

ANSI: GIF 5.36-0.20 IC808

ISO: GIF 5.36-0.20 IC808

$37.35
Picture of ISCAR GIP 5.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIP 5.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIP 5.00E-0.80 IC830

ISO: GIP 5.00E-0.80 IC830

$37.35
Picture of ISCAR GIF 5.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIF 5.00E-0.60 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIF 5.00E-0.60 IC830

ISO: GIF 5.00E-0.60 IC830

$37.35
Picture of ISCAR GIP 4.78E-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ISCAR GIP 4.78E-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ANSI: GIP 4.78E-0.55 IC808

ISO: GIP 4.78E-0.55 IC808

$37.35
Picture of ISCAR GIF 4.45-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.45-0.15 IC808 Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.45-0.15 IC808

ISO: GIF 4.45-0.15 IC808

$37.35
Picture of ISCAR GIP 5.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIP 5.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIP 5.00E-0.40 IC808

ISO: GIP 5.00E-0.40 IC808

$37.35
Picture of ISCAR GIF 5.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIF 5.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIF 5.00E-0.40 IC808

ISO: GIF 5.00E-0.40 IC808

$37.35
Picture of ISCAR GINI 5.00E-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GINI 5.00E-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GINI 5.00E-0.50 IC808

ISO: GINI 5.00E-0.50 IC808

$37.35
Picture of ISCAR GIPI 5.00E-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 5.00E-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 5.00E-0.50 IC808

ISO: GIPI 5.00E-0.50 IC808

$37.35
Picture of ISCAR GIFI 5.00E-0.50 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIFI 5.00E-0.50 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIFI 5.00E-0.50 IC830

ISO: GIFI 5.00E-0.50 IC830

$37.35
Picture of ISCAR GIF 4.78-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.78-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.78-0.55 IC808

ISO: GIF 4.78-0.55 IC808

$37.35
Picture of ISCAR GIP 5.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIP 5.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIP 5.00E-0.80 IC808

ISO: GIP 5.00E-0.80 IC808

$37.35
Picture of ISCAR GIP 4.78E-0.55 IC830 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide AlTiN + TiN

ISCAR GIP 4.78E-0.55 IC830 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide AlTiN + TiN

ANSI: GIP 4.78E-0.55 IC830

ISO: GIP 4.78E-0.55 IC830

$37.35
Picture of ISCAR GIF 5.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIF 5.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIF 5.00E-0.40 IC830

ISO: GIF 5.00E-0.40 IC830

$37.35
Picture of ISCAR GIF 5.28-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiAlN + AlTiN + TiN

ISCAR GIF 5.28-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiAlN + AlTiN + TiN

ANSI: GIF 5.28-0.20 IC808

ISO: GIF 5.28-0.20 IC808

$37.35
Picture of ISCAR GIPI 4.78-0.55 IC830 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide AlTiN + TiN

ISCAR GIPI 4.78-0.55 IC830 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide AlTiN + TiN

ANSI: GIPI 4.78-0.55 IC830

ISO: GIPI 4.78-0.55 IC830

$37.35
Picture of ISCAR GIF 5.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIF 5.00E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIF 5.00E-0.80 IC830

ISO: GIF 5.00E-0.80 IC830

$37.35
Picture of ISCAR GIPI 4.78-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 4.78-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 4.78-0.55 IC808

ISO: GIPI 4.78-0.55 IC808

$37.35
Picture of ISCAR GIP 5.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ISCAR GIP 5.00E-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide AlTiN

ANSI: GIP 5.00E-0.40 IC806

ISO: GIP 5.00E-0.40 IC806

$37.35
Picture of ISCAR GIF 4.86-0.30 IC808 Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.86-0.30 IC808 Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.86-0.30 IC808

ISO: GIF 4.86-0.30 IC808

$37.35
Picture of ARNO ROUSE SA24-2000ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE SA24-2000ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: SA24-2000ER-S1-15G AK1020

ISO: SA24-2000ER-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ISCAR GDMY 840 IC428 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GDMY 840 IC428 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GDMY 840 IC428

ISO: GDMY 840 IC428

$37.27
Picture of ARNO ROUSE SA24-2500ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ARNO ROUSE SA24-2500ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ANSI: SA24-2500ER-S1-15G AK1020

ISO: SA24-2500ER-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ARNO ROUSE SA24-2500EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ANSI: SA24-2500EL-S1-15G AK1020

ISO: SA24-2500EL-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3000ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE SA24-3000ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: SA24-3000ER-S1-8G AK1020

ISO: SA24-3000ER-S1-8G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500EN-S1-G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ARNO ROUSE SA24-2500EN-S1-G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ANSI: SA24-2500EN-S1-G AK1020

ISO: SA24-2500EN-S1-G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ARNO ROUSE SA24-2500ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.098 Wide

ANSI: SA24-2500ER-S1-8G AK1020

ISO: SA24-2500ER-S1-8G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3000EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE SA24-3000EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: SA24-3000EL-S1-15G AK1020

ISO: SA24-3000EL-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3000ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE SA24-3000ER-S1-15G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: SA24-3000ER-S1-15G AK1020

ISO: SA24-3000ER-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3000EN-S1-G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE SA24-3000EN-S1-G AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: SA24-3000EN-S1-G AK1020

ISO: SA24-3000EN-S1-G AK1020

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 3.00E-1.50 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.00E-1.50 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.00E-1.50 IC8250

ISO: GIP 3.00E-1.50 IC8250

$37.20
Picture of ISCAR GIP 3.18-1.59 IC8250 Cut Off,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.18-1.59 IC8250 Cut Off,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.18-1.59 IC8250

ISO: GIP 3.18-1.59 IC8250

$37.20
Picture of ISCAR GIPI 3.18-1.59 IC8250 Cut Off,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 3.18-1.59 IC8250 Cut Off,Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 3.18-1.59 IC8250

ISO: GIPI 3.18-1.59 IC8250

$37.20
Picture of ISCAR GRIP 6030Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GRIP 6030Y IC808 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GRIP 6030Y IC808

ISO: GRIP 6030Y IC808

$37.12
Picture of ISCAR HFPR 6030 IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR HFPR 6030 IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: HFPR 6030 IC806

ISO: HFPR 6030 IC806

$37.12
Picture of ISCAR GRIP 6030Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GRIP 6030Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GRIP 6030Y IC806

ISO: GRIP 6030Y IC806

$37.12
Picture of ISCAR GRIP 635-318Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN

ISCAR GRIP 635-318Y IC806 Face Grooving,Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN

ANSI: GRIP 635-318Y IC806

ISO: GRIP 635-318Y IC806

$37.12
Picture of ISCAR HFPL 6030 IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR HFPL 6030 IC806 Face Grooving,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: HFPL 6030 IC806

ISO: HFPL 6030 IC806

$37.12
Picture of ISCAR GRIP 6030Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR GRIP 6030Y IC908 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: GRIP 6030Y IC908

ISO: GRIP 6030Y IC908

$37.12
Picture of SECO LCGN1603M0-0120L-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN1603M0-0120L-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN1603M0-0120L-R CP500

ISO: LCGN1603M0-0120L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN1603M0-0120R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN1603M0-0120R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN1603M0-0120R-R CP500

ISO: LCGN1603M0-0120R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160306-0100L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160306-0100L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160306-0100L-D76 CP500

ISO: LCGN160306-0100L-D76 CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN1603M0-0100R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN1603M0-0100R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN1603M0-0100R-R CP500

ISO: LCGN1603M0-0100R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160301-0165-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160301-0165-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160301-0165-FG CP500

ISO: LCGN160301-0165-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160300-0135-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160300-0135-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160300-0135-FG CP500

ISO: LCGN160300-0135-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160301-0215-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160301-0215-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160301-0215-FG CP500

ISO: LCGN160301-0215-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN1603M0-0100L-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN1603M0-0100L-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN1603M0-0100L-R CP500

ISO: LCGN1603M0-0100L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160305-0180-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160305-0180-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160305-0180-DY CP500

ISO: LCGN160305-0180-DY CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160302-0265-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160302-0265-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160302-0265-FG CP500

ISO: LCGN160302-0265-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160300-0115-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160300-0115-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160300-0115-FG CP500

ISO: LCGN160300-0115-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160301-0190-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160301-0190-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160301-0190-FG CP500

ISO: LCGN160301-0190-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160302-0320-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160302-0320-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160302-0320-FG CP500

ISO: LCGN160302-0320-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160302-0300-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160302-0300-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160302-0300-FG CP500

ISO: LCGN160302-0300-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160302-0340-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160302-0340-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160302-0340-FG CP500

ISO: LCGN160302-0340-FG CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR6-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR6-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

ANSI: DTR6-300 GH130

ISO: DTR6-300 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI500-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY DTI500-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: DTI500-040 NS9530

ISO: DTI500-040 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR6-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR6-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTR6-300 AH725

ISO: DTR6-300 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR6-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR6-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTR6-300 AH7025

ISO: DTR6-300 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI500-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

TUNGALOY DTI500-080 NS9530 Clamp Down Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: DTI500-080 NS9530

ISO: DTI500-080 NS9530

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FL AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FL AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FL AP4020

ISO: LST 081025FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-0FR-P AK1020 Groove Turning Insert 0.039 Wide Carbide

ARNO ROUSE LVD 08-0FR-P AK1020 Groove Turning Insert 0.039 Wide Carbide

ANSI: LVD 08-0FR-P AK1020

ISO: LVD 08-0FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FL AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FL AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FL AP5020

ISO: LST 081230FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FR AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FR AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FR AP4020

ISO: LST 081530FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 081050FR AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LRD 081050FR AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LRD 081050FR AP4020

ISO: LRD 081050FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FL AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ARNO ROUSE LST 083065FL AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ANSI: LST 083065FL AP4020

ISO: LST 083065FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FL AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FL AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FL AP5020

ISO: LST 081530FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FL AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FL AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FL AP4020

ISO: LST 081530FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FR-P AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE LST 082040FR-P AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: LST 082040FR-P AK1020

ISO: LST 082040FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080802FL AP4020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ARNO ROUSE LST 080802FL AP4020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ANSI: LST 080802FL AP4020

ISO: LST 080802FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FR-P AK1020 Grooving,Groove Turning Insert 0.047 Wide

ARNO ROUSE LST 081230FR-P AK1020 Grooving,Groove Turning Insert 0.047 Wide

ANSI: LST 081230FR-P AK1020

ISO: LST 081230FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FR AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FR AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FR AP4020

ISO: LST 082040FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080802FL AP5020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ARNO ROUSE LST 080802FL AP5020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ANSI: LST 080802FL AP5020

ISO: LST 080802FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-2FR AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LVD 08-2FR AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LVD 08-2FR AP5020

ISO: LVD 08-2FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FR AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FR AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FR AP5020

ISO: LST 082040FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FR AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FR AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FR AP4020

ISO: LST 082560FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FL AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FL AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FL AP5020

ISO: LST 081025FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide

ARNO ROUSE LST 081025FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide

ANSI: LST 081025FR-P AK1020

ISO: LST 081025FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FR AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FR AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FR AP5020

ISO: LST 081025FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FL-P AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE LST 082040FL-P AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: LST 082040FL-P AK1020

ISO: LST 082040FL-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FR AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FR AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FR AP4020

ISO: LST 081025FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE LST 083065FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: LST 083065FR-P AK1020

ISO: LST 083065FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FR AP5020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ARNO ROUSE LST 083065FR AP5020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ANSI: LST 083065FR AP5020

ISO: LST 083065FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FL AP5020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ARNO ROUSE LST 083065FL AP5020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ANSI: LST 083065FL AP5020

ISO: LST 083065FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FR-P AK1020 Grooving,Groove Turning Insert 0.059 Wide

ARNO ROUSE LST 081530FR-P AK1020 Grooving,Groove Turning Insert 0.059 Wide

ANSI: LST 081530FR-P AK1020

ISO: LST 081530FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FL AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FL AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FL AP4020

ISO: LST 082560FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080802FR AP4020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ARNO ROUSE LST 080802FR AP4020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ANSI: LST 080802FR AP4020

ISO: LST 080802FR AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FL-P AK1020 Grooving,Groove Turning Insert 0.039 Wide

ARNO ROUSE LST 081025FL-P AK1020 Grooving,Groove Turning Insert 0.039 Wide

ANSI: LST 081025FL-P AK1020

ISO: LST 081025FL-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FL-P AK1020 Grooving,Groove Turning Insert 0.047 Wide

ARNO ROUSE LST 081230FL-P AK1020 Grooving,Groove Turning Insert 0.047 Wide

ANSI: LST 081230FL-P AK1020

ISO: LST 081230FL-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FL AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FL AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FL AP4020

ISO: LST 081230FL AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-0FR AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LVD 08-0FR AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LVD 08-0FR AP5020

ISO: LVD 08-0FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FL-P AK1020 Grooving,Groove Turning Insert 0.118 Wide

ARNO ROUSE LST 083065FL-P AK1020 Grooving,Groove Turning Insert 0.118 Wide

ANSI: LST 083065FL-P AK1020

ISO: LST 083065FL-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 081050FL AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LRD 081050FL AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LRD 081050FL AP5020

ISO: LRD 081050FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-0FL-P AK1020 Groove Turning Insert 0.039 Wide Carbide

ARNO ROUSE LVD 08-0FL-P AK1020 Groove Turning Insert 0.039 Wide Carbide

ANSI: LVD 08-0FL-P AK1020

ISO: LVD 08-0FL-P AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FL AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FL AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FL AP5020

ISO: LST 082040FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-0FL AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LVD 08-0FL AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LVD 08-0FL AP5020

ISO: LVD 08-0FL AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FR AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FR AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FR AP5020

ISO: LST 081230FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080802FR AP5020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ARNO ROUSE LST 080802FR AP5020 Grooving,Groove Turning Insert 0.032 Wide TiCN

ANSI: LST 080802FR AP5020

ISO: LST 080802FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FR AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FR AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FR AP4020

ISO: LST 081230FR AP4020

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 1260 IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 1260 IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 1260 IC8250

ISO: GIMY 1260 IC8250

$36.73
Picture of ISCAR MEFL 8-2.20-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide TiAlN

ISCAR MEFL 8-2.20-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide TiAlN

ANSI: MEFL 8-2.20-0.20 IC908

ISO: MEFL 8-2.20-0.20 IC908

$36.73
Picture of ISCAR MEFL 8-1.50-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.059 Wide TiAlN

ISCAR MEFL 8-1.50-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.059 Wide TiAlN

ANSI: MEFL 8-1.50-0.20 IC908

ISO: MEFL 8-1.50-0.20 IC908

$36.73
Picture of ISCAR GEPI 0.80-0.00RX IC908 Grooving,Groove Turning Insert 0.031 Wide TiAlN

ISCAR GEPI 0.80-0.00RX IC908 Grooving,Groove Turning Insert 0.031 Wide TiAlN

ANSI: GEPI 0.80-0.00RX IC908

ISO: GEPI 0.80-0.00RX IC908

$36.73
Picture of ISCAR MEFL 8-2.00-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide TiAlN

ISCAR MEFL 8-2.00-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide TiAlN

ANSI: MEFL 8-2.00-0.20 IC908

ISO: MEFL 8-2.00-0.20 IC908

$36.73
Picture of ISCAR FGPA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FGPA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FGPA 80-40 IC20

ISO: FGPA 80-40 IC20

$36.50
Picture of ISCAR GIDA 80-40 IC4 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIDA 80-40 IC4 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIDA 80-40 IC4

ISO: GIDA 80-40 IC4

$36.50
Picture of ISCAR GIDA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIDA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIDA 80-40YZ IC20

ISO: GIDA 80-40YZ IC20

$36.50
Picture of ISCAR FGPA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FGPA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FGPA 80-40YZ IC20

ISO: FGPA 80-40YZ IC20

$36.50
Picture of ISCAR GIDA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIDA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIDA 80-40 IC20

ISO: GIDA 80-40 IC20

$36.50
Picture of ISCAR GIPI 3.96-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.156 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 3.96-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.156 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 3.96-0.20 IC8250

ISO: GIPI 3.96-0.20 IC8250

$36.50
Picture of SECO LCMR1605M0-0500-MP CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMR1605M0-0500-MP CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMR1605M0-0500-MP CP500

ISO: LCMR1605M0-0500-MP CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 0.50-0.00 IC808 Grooving,Groove Turning Insert 0.020 Wide TiAlN + AlTiN + TiN

ISCAR GIP 0.50-0.00 IC808 Grooving,Groove Turning Insert 0.020 Wide TiAlN + AlTiN + TiN

ANSI: GIP 0.50-0.00 IC808

ISO: GIP 0.50-0.00 IC808

$36.42
Picture of ISCAR GIF 3.56-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.140 Wide TiCN + Al2O3 + TiN

ISCAR GIF 3.56-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.140 Wide TiCN + Al2O3 + TiN

ANSI: GIF 3.56-0.20 IC8250

ISO: GIF 3.56-0.20 IC8250

$36.42
Picture of ISCAR GIFI 4.00E-0.40 IC8250 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 4.00E-0.40 IC8250 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 4.00E-0.40 IC8250

ISO: GIFI 4.00E-0.40 IC8250

$36.42
Picture of ISCAR GIF 4.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.00E-0.80 IC8250

ISO: GIF 4.00E-0.80 IC8250

$36.42
Picture of ISCAR GIF 4.00E-0.60 IC8250 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.00E-0.60 IC8250 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.00E-0.60 IC8250

ISO: GIF 4.00E-0.60 IC8250

$36.42
Picture of ISCAR GIP 3.74-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.74-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.74-0.20 IC8250

ISO: GIP 3.74-0.20 IC8250

$36.42
Picture of ISCAR GIP 4.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.80 IC8250

ISO: GIP 4.00E-0.80 IC8250

$36.42
Picture of ISCAR GIP 3.98-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.98-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.98-0.20 IC8250

ISO: GIP 3.98-0.20 IC8250

$36.42
Picture of ISCAR GIF 3.74-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiCN + Al2O3 + TiN

ISCAR GIF 3.74-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.147 Wide TiCN + Al2O3 + TiN

ANSI: GIF 3.74-0.20 IC8250

ISO: GIF 3.74-0.20 IC8250

$36.42
Picture of ISCAR GIPI 4.00E-0.40 IC8250 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 4.00E-0.40 IC8250 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 4.00E-0.40 IC8250

ISO: GIPI 4.00E-0.40 IC8250

$36.42
Picture of ISCAR GIP 3.98-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.98-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.98-0.20 IC8250

ISO: GIP 3.98-0.20 IC8250

$36.42
Picture of ISCAR GIP 4.23-0.10 IC8250 Cut Off,Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.23-0.10 IC8250 Cut Off,Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.23-0.10 IC8250

ISO: GIP 4.23-0.10 IC8250

$36.42
Picture of ISCAR GIP 3.48-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiCN + Al2O3 + TiN

ISCAR GIP 3.48-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiCN + Al2O3 + TiN

ANSI: GIP 3.48-0.20 IC8250

ISO: GIP 3.48-0.20 IC8250

$36.42
Picture of ISCAR GIP 4.00E-0.60 IC5010 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.60 IC5010 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.60 IC5010

ISO: GIP 4.00E-0.60 IC5010

$36.42
Picture of ISCAR GIF 3.48-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiCN + Al2O3 + TiN

ISCAR GIF 3.48-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide TiCN + Al2O3 + TiN

ANSI: GIF 3.48-0.20 IC8250

ISO: GIF 3.48-0.20 IC8250

$36.42
Picture of ISCAR GIP 4.00E-0.60 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.60 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.60 IC8250

ISO: GIP 4.00E-0.60 IC8250

$36.42
Picture of ISCAR GIF 4.23-0.10 IC8250 Cut Off,Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.23-0.10 IC8250 Cut Off,Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.23-0.10 IC8250

ISO: GIF 4.23-0.10 IC8250

$36.42
Picture of ISCAR GIP 4.00E-0.40 IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.40 IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.40 IC5010

ISO: GIP 4.00E-0.40 IC5010

$36.42
Picture of ISCAR GIP 4.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.80 IC428

ISO: GIP 4.00E-0.80 IC428

$36.42
Picture of ISCAR GIF 4.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.00E-0.40 IC8250

ISO: GIF 4.00E-0.40 IC8250

$36.42
Picture of ISCAR GIP 4.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.00E-0.40 IC8250

ISO: GIP 4.00E-0.40 IC8250

$36.42
Picture of TUNGALOY DTE6-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.236 Wide

TUNGALOY DTE6-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.236 Wide

ANSI: DTE6-080 AH7025

ISO: DTE6-080 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE6-080 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.031 Corner Radius 0.236 Wide

TUNGALOY DTE6-080 T515 Clamp Down Grooving,Groove Turning Insert TiCN + Al2O3 0.031 Corner Radius 0.236 Wide

ANSI: DTE6-080 T515

ISO: DTE6-080 T515

Call (262) 251-4020 for pricing
Picture of ISCAR GIPA 8-35V-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ISCAR GIPA 8-35V-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide

ANSI: GIPA 8-35V-1.20 IC20

ISO: GIPA 8-35V-1.20 IC20

$36.35
Picture of ISCAR MIFR 8-1.60-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.063 Wide TiAlN

ISCAR MIFR 8-1.60-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.063 Wide TiAlN

ANSI: MIFR 8-1.60-0.80 IC908

ISO: MIFR 8-1.60-0.80 IC908

$36.35
Picture of ISCAR GIPA 8-35V-3.0 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.315 Wide

ISCAR GIPA 8-35V-3.0 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.315 Wide

ANSI: GIPA 8-35V-3.0 IC20

ISO: GIPA 8-35V-3.0 IC20

$36.35
Picture of ISCAR GIPA 8YZ-35V-0.80 IC4 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ISCAR GIPA 8YZ-35V-0.80 IC4 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ANSI: GIPA 8YZ-35V-0.80 IC4

ISO: GIPA 8YZ-35V-0.80 IC4

$36.35
Picture of ARNO ROUSE SA35-3002L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ARNO ROUSE SA35-3002L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ANSI: SA35-3002L-ALU-15 AN1015

ISO: SA35-3002L-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3003N-ALU AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ARNO ROUSE SA35-3003N-ALU AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ANSI: SA35-3003N-ALU AN1015

ISO: SA35-3003N-ALU AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-6006N-M1 AP5020 Grooving,Groove Turning Insert 0.236 Wide 0.024 Corner Radius TiCN

ARNO ROUSE SA35-6006N-M1 AP5020 Grooving,Groove Turning Insert 0.236 Wide 0.024 Corner Radius TiCN

ANSI: SA35-6006N-M1 AP5020

ISO: SA35-6006N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3002R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ARNO ROUSE SA35-3002R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ANSI: SA35-3002R-ALU-15 AN1015

ISO: SA35-3002R-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1500ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE SA24-1500ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: SA24-1500ER-S1-8G AP5020

ISO: SA24-1500ER-S1-8G AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TAGB 1208Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 1208Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 1208Y IC8250

ISO: TAGB 1208Y IC8250

$36.18
Picture of ARNO ROUSE SA35-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA35-3002R-S1-12 AP5020

ISO: SA35-3002R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3002L-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-3002L-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-3002L-S1-12 AM5040

ISO: SA35-3002L-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000EN-S1-G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE SA24-2000EN-S1-G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: SA24-2000EN-S1-G AK1020

ISO: SA24-2000EN-S1-G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080502FR AK1020 Grooving,Groove Turning Insert 0.020 Wide

ARNO ROUSE LST 080502FR AK1020 Grooving,Groove Turning Insert 0.020 Wide

ANSI: LST 080502FR AK1020

ISO: LST 080502FR AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-3002R-S1-12 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-3002R-S1-12 AM5040

ISO: SA35-3002R-S1-12 AM5040

Call (262) 251-4020 for pricing
Picture of SECO LCMR1605M0-0500-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR1605M0-0500-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR1605M0-0500-MP TGP25

ISO: LCMR1605M0-0500-MP TGP25

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE SA24-2000EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: SA24-2000EL-S1-15G AK1020

ISO: SA24-2000EL-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ARNO ROUSE SA24-2000ER-S1-8G AK1020 Grooving,Groove Turning Insert 0.079 Wide

ANSI: SA24-2000ER-S1-8G AK1020

ISO: SA24-2000ER-S1-8G AK1020

Call (262) 251-4020 for pricing
Picture of ISCAR GIPI 4.00-2.0UL IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIPI 4.00-2.0UL IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIPI 4.00-2.0UL IC20

ISO: GIPI 4.00-2.0UL IC20

$35.96
Picture of SECO LCEX110510-0200L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110510-0200L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110510-0200L-R

ISO: LCEX110510-0200L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110504-0080L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110504-0080L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110504-0080L-R

ISO: LCEX110504-0080L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110510-0200R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110510-0200R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110510-0200R-R

ISO: LCEX110510-0200R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110509-0180L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110509-0180L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110509-0180L-R

ISO: LCEX110509-0180L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110506-0120L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110506-0120L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110506-0120L-R

ISO: LCEX110506-0120L-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110504-0080R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110504-0080R-R CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110504-0080R-R CP500

ISO: LCEX110504-0080R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110509-0180R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110509-0180R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110509-0180R-R

ISO: LCEX110509-0180R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110506-0120R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110506-0120R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110506-0120R-R

ISO: LCEX110506-0120R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110515-0300R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110515-0300R-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110515-0300R-R

ISO: LCEX110515-0300R-R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX110515-0300L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110515-0300L-R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110515-0300L-R

ISO: LCEX110515-0300L-R CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 0.80-0.00RX IC830 Grooving,Groove Turning Insert 0.031 Wide AlTiN + TiN

ISCAR GIP 0.80-0.00RX IC830 Grooving,Groove Turning Insert 0.031 Wide AlTiN + TiN

ANSI: GIP 0.80-0.00RX IC830

ISO: GIP 0.80-0.00RX IC830

$35.81
Picture of ISCAR GIPI 0.78-0.1LX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.031 Wide TiAlN + AlTiN + TiN

ISCAR GIPI 0.78-0.1LX IC808 Grooving,Groove Turning Insert 0.004 Corner Radius 0.031 Wide TiAlN + AlTiN + TiN

ANSI: GIPI 0.78-0.1LX IC808

ISO: GIPI 0.78-0.1LX IC808

$35.81
Picture of ISCAR GIP 0.80-0.00LX IC830 Grooving,Groove Turning Insert 0.031 Wide AlTiN + TiN

ISCAR GIP 0.80-0.00LX IC830 Grooving,Groove Turning Insert 0.031 Wide AlTiN + TiN

ANSI: GIP 0.80-0.00LX IC830

ISO: GIP 0.80-0.00LX IC830

$35.81
Picture of TUNGALOY DTX3-030 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.011 Corner Radius 0.118 Wide

TUNGALOY DTX3-030 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.011 Corner Radius 0.118 Wide

ANSI: DTX3-030 GH130

ISO: DTX3-030 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX3-030 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.011 Corner Radius 0.118 Wide

TUNGALOY DTX3-030 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.011 Corner Radius 0.118 Wide

ANSI: DTX3-030 AH725

ISO: DTX3-030 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTF3-040-L GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTF3-040-L GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTF3-040-L GH130

ISO: DTF3-040-L GH130

Call (262) 251-4020 for pricing