Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of TUNGALOY TCP18R043F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.017 Wide

TUNGALOY TCP18R043F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.017 Wide

ANSI: TCP18R043F-005 SH725

ISO: TCP18R043F-005 SH725

$42.60
Picture of TUNGALOY TCP18R033F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.013 Wide

TUNGALOY TCP18R033F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.013 Wide

ANSI: TCP18R033F-005 SH725

ISO: TCP18R033F-005 SH725

$42.60
Picture of TUNGALOY TCP18L043F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.017 Wide

TUNGALOY TCP18L043F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.017 Wide

ANSI: TCP18L043F-005 SH725

ISO: TCP18L043F-005 SH725

$42.60
Picture of TUNGALOY TCP18L033F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.013 Wide

TUNGALOY TCP18L033F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.013 Wide

ANSI: TCP18L033F-005 SH725

ISO: TCP18L033F-005 SH725

$42.60
Picture of TUNGALOY TCP18L050F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.020 Wide

TUNGALOY TCP18L050F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.020 Wide

ANSI: TCP18L050F-005 SH725

ISO: TCP18L050F-005 SH725

$42.60
Picture of TUNGALOY TCP18R050F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.020 Wide

TUNGALOY TCP18R050F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.020 Wide

ANSI: TCP18R050F-005 SH725

ISO: TCP18R050F-005 SH725

$42.60
Picture of SANDVIK N123H2-0400-0002-CM 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0002-CM 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0002-CM 4325

ISO: N123H2-0400-0002-CM 4325

$42.53
Picture of SANDVIK N123E2-0239-RO 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0239-RO 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0239-RO 1125

ISO: N123E2-0239-RO 1125

$42.18
Picture of SANDVIK N123E2-0200-0002-GF 1105 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0200-0002-GF 1105 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0200-0002-GF 1105

ISO: N123E2-0200-0002-GF 1105

$42.18
Picture of SANDVIK N123E2-0200-RO 1105 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0200-RO 1105 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0200-RO 1105

ISO: N123E2-0200-RO 1105

$42.18
Picture of SANDVIK N123G2-0300-0004-TM 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0300-0004-TM 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0300-0004-TM 4325

ISO: N123G2-0300-0004-TM 4325

$42.09
Picture of SANDVIK N123G2-0300-0003-TF 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0300-0003-TF 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0300-0003-TF 4325

ISO: N123G2-0300-0003-TF 4325

$42.09
Picture of SANDVIK N123G2-0400-RM 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0400-RM 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0400-RM 4325

ISO: N123G2-0400-RM 4325

$42.09
Picture of SANDVIK N123G2-0318-0003-GM 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0318-0003-GM 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0318-0003-GM 4325

ISO: N123G2-0318-0003-GM 4325

$42.09
Picture of SANDVIK R123E2-0200-1501-CS 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK R123E2-0200-1501-CS 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: R123E2-0200-1501-CS 1125

ISO: R123E2-0200-1501-CS 1125

$42.09
Picture of SANDVIK R123D2-0150-1001-CS 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK R123D2-0150-1001-CS 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: R123D2-0150-1001-CS 1125

ISO: R123D2-0150-1001-CS 1125

$42.09
Picture of SANDVIK N123E2-0200-0004-GF 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0200-0004-GF 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0200-0004-GF 1125

ISO: N123E2-0200-0004-GF 1125

$42.09
Picture of SANDVIK N123D2-0150-0001-GF 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123D2-0150-0001-GF 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123D2-0150-0001-GF 1125

ISO: N123D2-0150-0001-GF 1125

$42.09
Picture of SANDVIK N123E2-0200-RO 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0200-RO 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0200-RO 1125

ISO: N123E2-0200-RO 1125

$42.09
Picture of SANDVIK N123E2-0198-0002-GF 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123E2-0198-0002-GF 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123E2-0198-0002-GF 1125

ISO: N123E2-0198-0002-GF 1125

$42.09
Picture of TUNGALOY TCS27-200-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

ANSI: TCS27-200-15L AH725

ISO: TCS27-200-15L AH725

$41.95
Picture of TUNGALOY TCS27-200-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

ANSI: TCS27-200-15R AH725

ISO: TCS27-200-15R AH725

$41.95
Picture of TUNGALOY TCS27-200-6L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-6L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

ANSI: TCS27-200-6L AH725

ISO: TCS27-200-6L AH725

$41.95
Picture of TUNGALOY TCS27-200-6R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-6R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

ANSI: TCS27-200-6R AH725

ISO: TCS27-200-6R AH725

$41.95
Picture of TUNGALOY TCS27-150-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

ANSI: TCS27-150-15L AH725

ISO: TCS27-150-15L AH725

$41.95
Picture of TUNGALOY TCS27-150-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

ANSI: TCS27-150-15R AH725

ISO: TCS27-150-15R AH725

$41.95
Picture of TUNGALOY TCS27-150-6L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-6L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

ANSI: TCS27-150-6L AH725

ISO: TCS27-150-6L AH725

$41.95
Picture of TUNGALOY TCS27-150-6R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-6R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.059 Wide

ANSI: TCS27-150-6R AH725

ISO: TCS27-150-6R AH725

$41.95
Picture of TUNGALOY TCS27-100-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

TUNGALOY TCS27-100-15L AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

ANSI: TCS27-100-15L AH725

ISO: TCS27-100-15L AH725

$41.95
Picture of TUNGALOY TCS27-100-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

TUNGALOY TCS27-100-15R AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

ANSI: TCS27-100-15R AH725

ISO: TCS27-100-15R AH725

$41.95
Picture of TUNGALOY TCS27-239-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.094 Wide

TUNGALOY TCS27-239-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.094 Wide

ANSI: TCS27-239-015 AH725

ISO: TCS27-239-015 AH725

$41.95
Picture of TUNGALOY TCS27-230-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.091 Wide

TUNGALOY TCS27-230-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.091 Wide

ANSI: TCS27-230-020 AH725

ISO: TCS27-230-020 AH725

$41.95
Picture of TUNGALOY TCS27-222-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.087 Wide

TUNGALOY TCS27-222-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.087 Wide

ANSI: TCS27-222-015 AH725

ISO: TCS27-222-015 AH725

$41.95
Picture of TUNGALOY TCS27-200-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.079 Wide

ANSI: TCS27-200-010 AH725

ISO: TCS27-200-010 AH725

$41.95
Picture of TUNGALOY TCS27-196-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.077 Wide

TUNGALOY TCS27-196-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.077 Wide

ANSI: TCS27-196-015 AH725

ISO: TCS27-196-015 AH725

$41.95
Picture of TUNGALOY TCS27-185-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.073 Wide

TUNGALOY TCS27-185-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.073 Wide

ANSI: TCS27-185-020 AH725

ISO: TCS27-185-020 AH725

$41.95
Picture of TUNGALOY TCS27-178-018 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.070 Wide

TUNGALOY TCS27-178-018 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.070 Wide

ANSI: TCS27-178-018 AH725

ISO: TCS27-178-018 AH725

$41.95
Picture of TUNGALOY TCS27-175-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.069 Wide

TUNGALOY TCS27-175-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.069 Wide

ANSI: TCS27-175-020 AH725

ISO: TCS27-175-020 AH725

$41.95
Picture of TUNGALOY TCS27-175-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.069 Wide

TUNGALOY TCS27-175-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.069 Wide

ANSI: TCS27-175-010 AH725

ISO: TCS27-175-010 AH725

$41.95
Picture of TUNGALOY TCS27-170-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.067 Wide

TUNGALOY TCS27-170-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.067 Wide

ANSI: TCS27-170-010 AH725

ISO: TCS27-170-010 AH725

$41.95
Picture of TUNGALOY TCS27-157-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.062 Wide

TUNGALOY TCS27-157-015 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.062 Wide

ANSI: TCS27-157-015 AH725

ISO: TCS27-157-015 AH725

$41.95
Picture of TUNGALOY TCS27-150-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.059 Wide

ANSI: TCS27-150-020 AH725

ISO: TCS27-150-020 AH725

$41.95
Picture of TUNGALOY TCS27-150-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.059 Wide

TUNGALOY TCS27-150-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.059 Wide

ANSI: TCS27-150-010 AH725

ISO: TCS27-150-010 AH725

$41.95
Picture of TUNGALOY TCS27-147-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.058 Wide

TUNGALOY TCS27-147-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.058 Wide

ANSI: TCS27-147-000 AH725

ISO: TCS27-147-000 AH725

$41.95
Picture of TUNGALOY TCS27-140-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.055 Wide

TUNGALOY TCS27-140-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.055 Wide

ANSI: TCS27-140-000 AH725

ISO: TCS27-140-000 AH725

$41.95
Picture of TUNGALOY TCS27-125-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.049 Wide

TUNGALOY TCS27-125-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.049 Wide

ANSI: TCS27-125-020 AH725

ISO: TCS27-125-020 AH725

$41.95
Picture of TUNGALOY TCS27-125-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.049 Wide

TUNGALOY TCS27-125-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.049 Wide

ANSI: TCS27-125-010 AH725

ISO: TCS27-125-010 AH725

$41.95
Picture of TUNGALOY TCS27-120-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.047 Wide

TUNGALOY TCS27-120-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.047 Wide

ANSI: TCS27-120-000 AH725

ISO: TCS27-120-000 AH725

$41.95
Picture of TUNGALOY TCS27-104-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.041 Wide

TUNGALOY TCS27-104-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.041 Wide

ANSI: TCS27-104-000 AH725

ISO: TCS27-104-000 AH725

$41.95
Picture of TUNGALOY TCS27-100-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.039 Wide

TUNGALOY TCS27-100-010 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.003 Corner Radius 0.039 Wide

ANSI: TCS27-100-010 AH725

ISO: TCS27-100-010 AH725

$41.95
Picture of TUNGALOY TCS27-100-006 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

TUNGALOY TCS27-100-006 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.039 Wide

ANSI: TCS27-100-006 AH725

ISO: TCS27-100-006 AH725

$41.95
Picture of TUNGALOY TCS27-080-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.031 Wide

TUNGALOY TCS27-080-000 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.031 Wide

ANSI: TCS27-080-000 AH725

ISO: TCS27-080-000 AH725

$41.95
Picture of TUNGALOY TCS27-200-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

TUNGALOY TCS27-200-020 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

ANSI: TCS27-200-020 AH725

ISO: TCS27-200-020 AH725

$41.95
Picture of TUNGALOY DTI600-120 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

TUNGALOY DTI600-120 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

ANSI: DTI600-120 T9225

ISO: DTI600-120 T9225

$41.91
Picture of TUNGALOY DTI600-080 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

TUNGALOY DTI600-080 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

ANSI: DTI600-080 T9225

ISO: DTI600-080 T9225

$41.91
Picture of SECO LCEX1105-19WL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-19WL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-19WL

ISO: LCEX1105-19WL CP500

$41.81
Picture of SECO LCEX1105-19WR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-19WR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-19WR

ISO: LCEX1105-19WR CP500

$41.81
Picture of SECO LCEX1105-14WL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-14WL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-14WL

ISO: LCEX1105-14WL CP500

$41.81
Picture of SECO LCEX1105-14WR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-14WR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-14WR

ISO: LCEX1105-14WR CP500

$41.81
Picture of ISCAR SCIL41-BLA08-10K8 IC1008 Groove Turning,Turning Square Back Turning Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL41-BLA08-10K8 IC1008 Groove Turning,Turning Square Back Turning Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL41-BLA08-10K8 IC1008

ISO: SCIL41-BLA08-10K8 IC1008

$41.76
Picture of ISCAR SCIL41-ELA00-10K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL41-ELA00-10K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL41-ELA00-10K0 IC1008

ISO: SCIL41-ELA00-10K0 IC1008

$41.76
Picture of ISCAR SCIL41-AL00-33K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.250 Corner Radius

ISCAR SCIL41-AL00-33K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.250 Corner Radius

ANSI: SCIL41-AL00-33K16 IC1008

ISO: SCIL41-AL00-33K16 IC1008

$41.76
Picture of ISCAR SCIL41-AD08-30K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL41-AD08-30K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL41-AD08-30K8 IC1008

ISO: SCIL41-AD08-30K8 IC1008

$41.76
Picture of ISCAR SCIR 41-AR00-33K16 IC1008 Cut Off, Grooving,Groove Turning Insert 0.130 Wide TiAIN + TiN

ISCAR SCIR 41-AR00-33K16 IC1008 Cut Off, Grooving,Groove Turning Insert 0.130 Wide TiAIN + TiN

ANSI: SCIR 41-AR00-33K16 IC1008

ISO: SCIR 41-AR00-33K16 IC1008

$41.76
Picture of SANDVIK N123K2-0600-0008-TM 3115 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123K2-0600-0008-TM 3115 Grooving,Groove Turning Insert Clamp Down

ANSI: N123K2-0600-0008-TM 3115

ISO: N123K2-0600-0008-TM 3115

$41.75
Picture of SANDVIK N123K2-0600-0008-TM 2135 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123K2-0600-0008-TM 2135 Grooving,Groove Turning Insert Clamp Down

ANSI: N123K2-0600-0008-TM 2135

ISO: N123K2-0600-0008-TM 2135

$41.75
Picture of SANDVIK N123K2-0600-0004-GM 3115 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123K2-0600-0004-GM 3115 Grooving,Groove Turning Insert Clamp Down

ANSI: N123K2-0600-0004-GM 3115

ISO: N123K2-0600-0004-GM 3115

$41.75
Picture of SANDVIK N123K2-0600-0004-TM 2135 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123K2-0600-0004-TM 2135 Grooving,Groove Turning Insert Clamp Down

ANSI: N123K2-0600-0004-TM 2135

ISO: N123K2-0600-0004-TM 2135

$41.75
Picture of ARNO ROUSE LST 083065-02FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 083065-02FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ANSI: LST 083065-02FR-P AP5020

ISO: LST 083065-02FR-P AP5020

$41.72
Picture of ARNO ROUSE LST 083065-02FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 083065-02FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ANSI: LST 083065-02FR-P AP4020

ISO: LST 083065-02FR-P AP4020

$41.72
Picture of TUNGALOY DTE800-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

TUNGALOY DTE800-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

ANSI: DTE800-080 AH725

ISO: DTE800-080 AH725

$41.65
Picture of TUNGALOY DTE800-120 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

TUNGALOY DTE800-120 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

ANSI: DTE800-120 AH725

ISO: DTE800-120 AH725

$41.65
Picture of TUNGALOY DTE800-120 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.047 Corner Radius 0.315 Wide

TUNGALOY DTE800-120 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.047 Corner Radius 0.315 Wide

ANSI: DTE800-120 GH130

ISO: DTE800-120 GH130

$41.65
Picture of TUNGALOY DTE800-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.315 Wide

TUNGALOY DTE800-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.315 Wide

ANSI: DTE800-080 GH130

ISO: DTE800-080 GH130

$41.65
Picture of TUNGALOY DTE800-120 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

TUNGALOY DTE800-120 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

ANSI: DTE800-120 AH7025

ISO: DTE800-120 AH7025

$41.65
Picture of TUNGALOY DTE800-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

TUNGALOY DTE800-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

ANSI: DTE800-080 AH7025

ISO: DTE800-080 AH7025

$41.65
Picture of ARNO ROUSE LST 081530-02FR-P AP5010 Grooving,Groove Turning Insert 0.059 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 081530-02FR-P AP5010 Grooving,Groove Turning Insert 0.059 Wide 0.007 Corner Radius TiCN

ANSI: LST 081530-02FR-P AP5010

ISO: LST 081530-02FR-P AP5010

$41.63
Picture of SANDVIK N123H2-0400-0008-TM 1105 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0008-TM 1105 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0008-TM 1105

ISO: N123H2-0400-0008-TM 1105

$41.58
Picture of SANDVIK N123H2-0400-0008-TM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0008-TM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0008-TM 1125

ISO: N123H2-0400-0008-TM 1125

$41.58
Picture of SANDVIK N123H2-0400-0004-TF 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0004-TF 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0004-TF 1125

ISO: N123H2-0400-0004-TF 1125

$41.58
Picture of SANDVIK N123H2-0400-0004-TM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0004-TM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0004-TM 1125

ISO: N123H2-0400-0004-TM 1125

$41.58
Picture of SANDVIK N123H2-0400-RM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-RM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-RM 1125

ISO: N123H2-0400-RM 1125

$41.58
Picture of SANDVIK N123H2-0400-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0003-GM 1125

ISO: N123H2-0400-0003-GM 1125

$41.58
Picture of ISCAR GDPY 10.00-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ISCAR GDPY 10.00-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ANSI: GDPY 10.00-0.80 IC20

ISO: GDPY 10.00-0.80 IC20

$41.53
Picture of ISCAR GIF 10.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.394 Wide

ISCAR GIF 10.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.394 Wide

ANSI: GIF 10.00E-1.20 IC20

ISO: GIF 10.00E-1.20 IC20

$41.53
Picture of ISCAR GIF 10.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ISCAR GIF 10.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ANSI: GIF 10.00E-0.80 IC20

ISO: GIF 10.00E-0.80 IC20

$41.53
Picture of SECO LCMR3008M0-0800-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR3008M0-0800-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR3008M0-0800-MP TGP25

ISO: LCMR3008M0-0800-MP TGP25

$41.16
Picture of TUNGALOY DTI800-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

TUNGALOY DTI800-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

ANSI: DTI800-080 AH725

ISO: DTI800-080 AH725

$41.04
Picture of TUNGALOY DTI800-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.315 Wide

TUNGALOY DTI800-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.315 Wide

ANSI: DTI800-080 GH130

ISO: DTI800-080 GH130

$41.04
Picture of TUNGALOY DTI800-120 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.047 Corner Radius 0.315 Wide

TUNGALOY DTI800-120 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.047 Corner Radius 0.315 Wide

ANSI: DTI800-120 GH130

ISO: DTI800-120 GH130

$41.04
Picture of TUNGALOY DTI800-120 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

TUNGALOY DTI800-120 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

ANSI: DTI800-120 AH725

ISO: DTI800-120 AH725

$41.04
Picture of TUNGALOY DTI800-120 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

TUNGALOY DTI800-120 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.047 Corner Radius 0.315 Wide

ANSI: DTI800-120 AH7025

ISO: DTI800-120 AH7025

$41.04
Picture of TUNGALOY DTI800-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

TUNGALOY DTI800-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.315 Wide

ANSI: DTI800-080 AH7025

ISO: DTI800-080 AH7025

$41.04
Picture of ISCAR GEPI 3.00-1.50UN IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GEPI 3.00-1.50UN IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GEPI 3.00-1.50UN IC528

ISO: GEPI 3.00-1.50UN IC528

$40.91
Picture of ISCAR TIGERV 2006-152 IC20 Grooving,Groove Turning Insert 0.060 Corner Radius 0.790 Wide

ISCAR TIGERV 2006-152 IC20 Grooving,Groove Turning Insert 0.060 Corner Radius 0.790 Wide

ANSI: TIGERV 2006-152 IC20

ISO: TIGERV 2006-152 IC20

$40.91
Picture of SANDVIK CSGX 452A 6160 Grooving,Groove Turning Insert Clamp Down

SANDVIK CSGX 452A 6160 Grooving,Groove Turning Insert Clamp Down

ANSI: CSGX 452A 6160

ISO: CSGX 452A 6160

$40.89
Picture of ARNO ROUSE LST 081025-008FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide 0.003 Corner Radius

ARNO ROUSE LST 081025-008FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide 0.003 Corner Radius

ANSI: LST 081025-008FR-P AK1020

ISO: LST 081025-008FR-P AK1020

$40.60
Picture of ISCAR GIF 6.00E-3.00 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIF 6.00E-3.00 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIF 6.00E-3.00 IC830

ISO: GIF 6.00E-3.00 IC830

$40.52
Picture of ISCAR GIA 6.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIA 6.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIA 6.00K-0.80 IC5010

ISO: GIA 6.00K-0.80 IC5010

$40.52
Picture of ISCAR GIP 6.35E-3.18 IC9054 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIP 6.35E-3.18 IC9054 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIP 6.35E-3.18 IC9054

ISO: GIP 6.35E-3.18 IC9054

$40.52
Picture of ISCAR GIA 8.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIA 8.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIA 8.00K-0.80 IC428

ISO: GIA 8.00K-0.80 IC428

$40.52
Picture of ISCAR GIF 8.00E-1.20 IC428 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIF 8.00E-1.20 IC428 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIF 8.00E-1.20 IC428

ISO: GIF 8.00E-1.20 IC428

$40.52
Picture of ISCAR GIF 8.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIF 8.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIF 8.00E-0.80 IC428

ISO: GIF 8.00E-0.80 IC428

$40.52
Picture of ISCAR GPV 3-2.34-1 IC8250 Cut Off,Grooving,Groove Turning Insert 0.013 Corner Radius 0.110 Wide TiCN + Al2O3 + TiN

ISCAR GPV 3-2.34-1 IC8250 Cut Off,Grooving,Groove Turning Insert 0.013 Corner Radius 0.110 Wide TiCN + Al2O3 + TiN

ANSI: GPV 3-2.34-1 IC8250

ISO: GPV 3-2.34-1 IC8250

$40.45
Picture of SECO LCMF160604-0600-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160604-0600-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160604-0600-FT CP500

ISO: LCMF160604-0600-FT CP500

$40.43
Picture of SECO LCMF160604-0600-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160604-0600-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160604-0600-MC CP600

ISO: LCMF160604-0600-MC CP600

$40.43
Picture of SECO LCMF160608-0600-MG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160608-0600-MG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160608-0600-MG CP500

ISO: LCMF160608-0600-MG CP500

$40.43
Picture of SECO LCMF160610-0600-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160610-0600-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160610-0600-MT CP500

ISO: LCMF160610-0600-MT CP500

$40.43
Picture of SECO LCMF160605-A250-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160605-A250-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160605-A250-MT CP500

ISO: LCMF160605-A250-MT CP500

$40.43
Picture of SECO LCMF160605-A250-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160605-A250-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160605-A250-FT CP500

ISO: LCMF160605-A250-FT CP500

$40.43
Picture of SECO LCGF160604-0600-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGF160604-0600-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGF160604-0600-GS

ISO: LCGF160604-0600-GS

$40.43
Picture of ARNO ROUSE LRD 080504FR-P AP4020 Groove Turning Insert 0.020 Wide Carbide TiCN

ARNO ROUSE LRD 080504FR-P AP4020 Groove Turning Insert 0.020 Wide Carbide TiCN

ANSI: LRD 080504FR-P AP4020

ISO: LRD 080504FR-P AP4020

$40.41
Picture of TUNGALOY DTIU600-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

TUNGALOY DTIU600-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

ANSI: DTIU600-300 GH130

ISO: DTIU600-300 GH130

$40.09
Picture of TUNGALOY DTR600-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR600-300 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.118 Corner Radius 0.236 Wide

ANSI: DTR600-300 GH130

ISO: DTR600-300 GH130

$40.09
Picture of TUNGALOY DTIU600-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTIU600-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTIU600-300 AH725

ISO: DTIU600-300 AH725

$40.09
Picture of TUNGALOY DTR600-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR600-300 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTR600-300 AH725

ISO: DTR600-300 AH725

$40.09
Picture of TUNGALOY DTIU600-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTIU600-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTIU600-300 AH7025

ISO: DTIU600-300 AH7025

$40.09
Picture of TUNGALOY DTR600-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR600-300 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.118 Corner Radius 0.236 Wide

ANSI: DTR600-300 AH7025

ISO: DTR600-300 AH7025

$40.09
Picture of TUNGALOY TCP18R095-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.037 Wide

TUNGALOY TCP18R095-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.037 Wide

ANSI: TCP18R095-005 AH725

ISO: TCP18R095-005 AH725

$40.09
Picture of TUNGALOY TCP18R075-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.030 Wide

TUNGALOY TCP18R075-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.030 Wide

ANSI: TCP18R075-005 AH725

ISO: TCP18R075-005 AH725

$40.09
Picture of TUNGALOY TCP18L095-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.037 Wide

TUNGALOY TCP18L095-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.037 Wide

ANSI: TCP18L095-005 AH725

ISO: TCP18L095-005 AH725

$40.09
Picture of TUNGALOY TCP18L075-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.030 Wide

TUNGALOY TCP18L075-005 AH725 On Edge Cut Off,Grooving,Groove Turning Insert AlTiN 0.002 Corner Radius 0.030 Wide

ANSI: TCP18L075-005 AH725

ISO: TCP18L075-005 AH725

$40.09
Picture of TUNGALOY TCP18L095F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.037 Wide

TUNGALOY TCP18L095F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.037 Wide

ANSI: TCP18L095F-005 SH725

ISO: TCP18L095F-005 SH725

$40.09
Picture of TUNGALOY TCP18R095F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.037 Wide

TUNGALOY TCP18R095F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.037 Wide

ANSI: TCP18R095F-005 SH725

ISO: TCP18R095F-005 SH725

$40.09
Picture of TUNGALOY TCP18L075F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.030 Wide

TUNGALOY TCP18L075F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.030 Wide

ANSI: TCP18L075F-005 SH725

ISO: TCP18L075F-005 SH725

$40.09
Picture of TUNGALOY TCP18R075F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.030 Wide

TUNGALOY TCP18R075F-005 SH725 On Edge Cut Off,Grooving,Groove Turning Insert TiAlN 0.002 Corner Radius 0.030 Wide

ANSI: TCP18R075F-005 SH725

ISO: TCP18R075F-005 SH725

$40.09
Picture of SECO LCMF160608-0600-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160608-0600-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160608-0600-MT TGK1500

ISO: LCMF160608-0600-MT TGK1500

$40.04
Picture of SECO LCMF160608-0600-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160608-0600-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160608-0600-MC TGP25

ISO: LCMF160608-0600-MC TGP25

$40.04
Picture of SECO LCMF160610-0600-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160610-0600-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160610-0600-FT TGP25

ISO: LCMF160610-0600-FT TGP25

$40.04
Picture of SECO LCMF160604-0600-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160604-0600-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160604-0600-MC TGP25

ISO: LCMF160604-0600-MC TGP25

$40.04
Picture of SECO LCMF160608-0600-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160608-0600-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160608-0600-MG TGP25

ISO: LCMF160608-0600-MG TGP25

$40.04
Picture of SECO LCMF160604-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160604-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160604-0600-MT TGP25

ISO: LCMF160604-0600-MT TGP25

$40.04
Picture of SECO LCMF160608-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160608-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160608-0600-MT TGP25

ISO: LCMF160608-0600-MT TGP25

$40.04
Picture of SANDVIK N123J2-0500-0004-GM 3115 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123J2-0500-0004-GM 3115 Grooving,Groove Turning Insert Clamp Down

ANSI: N123J2-0500-0004-GM 3115

ISO: N123J2-0500-0004-GM 3115

$40.02
Picture of SANDVIK N123J2-0500-0004-TM 2135 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123J2-0500-0004-TM 2135 Grooving,Groove Turning Insert Clamp Down

ANSI: N123J2-0500-0004-TM 2135

ISO: N123J2-0500-0004-TM 2135

$40.02
Picture of SANDVIK N123H2-0500-RM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0500-RM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0500-RM 1125

ISO: N123H2-0500-RM 1125

$39.94
Picture of ISCAR GDMY 840 IC5010 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 840 IC5010 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 840 IC5010

ISO: GDMY 840 IC5010

$39.83
Picture of ISCAR GDMY 840 IC9250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 840 IC9250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 840 IC9250

ISO: GDMY 840 IC9250

$39.83
Picture of SANDVIK R123H2-0400-0501-CF 1145 Grooving,Groove Turning Insert Clamp Down

SANDVIK R123H2-0400-0501-CF 1145 Grooving,Groove Turning Insert Clamp Down

ANSI: R123H2-0400-0501-CF 1145

ISO: R123H2-0400-0501-CF 1145

$39.68
Picture of SANDVIK N123H2-0400-0001-CF 1145 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0001-CF 1145 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0001-CF 1145

ISO: N123H2-0400-0001-CF 1145

$39.68
Picture of SANDVIK N123H2-0400-0003-CR 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0003-CR 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0003-CR 1125

ISO: N123H2-0400-0003-CR 1125

$39.68
Picture of ISCAR GEPI 2.00-1.00UR IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GEPI 2.00-1.00UR IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GEPI 2.00-1.00UR IC528

ISO: GEPI 2.00-1.00UR IC528

$39.67
Picture of ISCAR GEPI 2.00-1.00UL IC528 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GEPI 2.00-1.00UL IC528 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GEPI 2.00-1.00UL IC528

ISO: GEPI 2.00-1.00UL IC528

$39.67
Picture of ISCAR GIPI 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 4.78-2.39 IC8250

ISO: GIPI 4.78-2.39 IC8250

$39.52
Picture of ISCAR GIF 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.78-2.39 IC8250

ISO: GIF 4.78-2.39 IC8250

$39.52
Picture of ISCAR GIP 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.78-2.39 IC8250

ISO: GIP 4.78-2.39 IC8250

$39.52
Picture of ISCAR GIFI 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 5.00E-2.50 IC8250

ISO: GIFI 5.00E-2.50 IC8250

$39.52
Picture of ISCAR GIF 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.00E-2.50 IC8250

ISO: GIF 5.00E-2.50 IC8250

$39.52
Picture of ISCAR GIP 5.00E-2.50 IC5010 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-2.50 IC5010 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-2.50 IC5010

ISO: GIP 5.00E-2.50 IC5010

$39.52
Picture of SECO LCGN160610-0200L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160610-0200L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160610-0200L-D76 CP500

ISO: LCGN160610-0200L-D76 CP500

$39.47
Picture of SECO LCGN160602-0635-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160602-0635-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160602-0635-FG CP500

ISO: LCGN160602-0635-FG CP500

$39.47
Picture of SECO LCGN160602-0600-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160602-0600-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160602-0600-FG CP500

ISO: LCGN160602-0600-FG CP500

$39.47
Picture of ISCAR SCIL22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL22-AD08-24K8 IC1008

ISO: SCIL22-AD08-24K8 IC1008

$39.36
Picture of ISCAR SCIL22-EL00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-EL00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-EL00-03K0 IC1008

ISO: SCIL22-EL00-03K0 IC1008

$39.36
Picture of ISCAR SCIR22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-AD08-24K8 IC1008

ISO: SCIR22-AD08-24K8 IC1008

$39.36
Picture of ISCAR SCIR22-ER00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-03K0 IC1008

ISO: SCIR22-ER00-03K0 IC1008

$39.36
Picture of ISCAR SCIR 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIR 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIR 22-250NX080 IC1008

ISO: SCIR 22-250NX080 IC1008

$39.36
Picture of ISCAR SCIR 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIR 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIR 22-200NX080 IC1008

ISO: SCIR 22-200NX080 IC1008

$39.36
Picture of ISCAR SCIR 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIR 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIR 22-150NX080 IC1008

ISO: SCIR 22-150NX080 IC1008

$39.36
Picture of ISCAR SCIL 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIL 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIL 22-250NX080 IC1008

ISO: SCIL 22-250NX080 IC1008

$39.36
Picture of ISCAR SCIL 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIL 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIL 22-200NX080 IC1008

ISO: SCIL 22-200NX080 IC1008

$39.36
Picture of ISCAR SCIL 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIL 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIL 22-150NX080 IC1008

ISO: SCIL 22-150NX080 IC1008

$39.36
Picture of ISCAR SCIR22-ER00-07K10 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-07K10 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-07K10 IC1008

ISO: SCIR22-ER00-07K10 IC1008

$39.36
Picture of ISCAR SCIR22-BR08-10K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-BR08-10K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-BR08-10K15 IC1008

ISO: SCIR22-BR08-10K15 IC1008

$39.36
Picture of ISCAR SCIR22-BR10-05K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-BR10-05K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-BR10-05K15 IC1008

ISO: SCIR22-BR10-05K15 IC1008

$39.36
Picture of ISCAR SCIL22-BL08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL22-BL08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL22-BL08-10K7 IC1008

ISO: SCIL22-BL08-10K7 IC1008

$39.36
Picture of ISCAR SCIR22-BR08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-BR08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-BR08-10K7 IC1008

ISO: SCIR22-BR08-10K7 IC1008

$39.36
Picture of ISCAR SCIR22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-EL00-07K0 IC1008

ISO: SCIR22-EL00-07K0 IC1008

$39.36
Picture of ISCAR SCIL22-BL10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIL22-BL10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIL22-BL10-05K7 IC1008

ISO: SCIL22-BL10-05K7 IC1008

$39.36
Picture of ISCAR SCIL22-BL00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ISCAR SCIL22-BL00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ANSI: SCIL22-BL00-05K7 IC1008

ISO: SCIL22-BL00-05K7 IC1008

$39.36
Picture of ISCAR SCIR22-BR00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ISCAR SCIR22-BR00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ANSI: SCIR22-BR00-05K7 IC1008

ISO: SCIR22-BR00-05K7 IC1008

$39.36
Picture of ISCAR SCIL22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-EL00-07K0 IC1008

ISO: SCIL22-EL00-07K0 IC1008

$39.36
Picture of ISCAR SCIR22-ER00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-07K0 IC1008

ISO: SCIR22-ER00-07K0 IC1008

$39.36
Picture of ISCAR SCIR22-AR10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-AR10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-AR10-25K8 IC1008

ISO: SCIR22-AR10-25K8 IC1008

$39.36
Picture of ISCAR SCIR22-AR00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-AR00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-AR00-25K16 IC1008

ISO: SCIR22-AR00-25K16 IC1008

$39.36
Picture of ISCAR SCIL22-AL10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIL22-AL10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIL22-AL10-25K8 IC1008

ISO: SCIL22-AL10-25K8 IC1008

$39.36
Picture of ISCAR SCIL22-AL00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-AL00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-AL00-25K16 IC1008

ISO: SCIL22-AL00-25K16 IC1008

$39.36
Picture of ISCAR SCIR22-BR10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-BR10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-BR10-05K7 IC1008

ISO: SCIR22-BR10-05K7 IC1008

$39.36
Picture of ISCAR SCIL22-AD08-24K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.003 Corner Radius

ISCAR SCIL22-AD08-24K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.003 Corner Radius

ANSI: SCIL22-AD08-24K8 IC1007

ISO: SCIL22-AD08-24K8 IC1007

$39.36
Picture of ISCAR SCIL 22-AL10-25K8 IC1007 Groove Turning,Turning Insert 0.004 Corner Radius TiAlN

ISCAR SCIL 22-AL10-25K8 IC1007 Groove Turning,Turning Insert 0.004 Corner Radius TiAlN

ANSI: SCIL 22-AL10-25K8 IC1007

ISO: SCIL 22-AL10-25K8 IC1007

$39.36
Picture of ISCAR SCIL22-AL00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIL22-AL00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIL22-AL00-25K16 IC1007

ISO: SCIL22-AL00-25K16 IC1007

$39.36
Picture of ISCAR SCIL22-BLA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ISCAR SCIL22-BLA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ANSI: SCIL22-BLA08-05K8 IC1007

ISO: SCIL22-BLA08-05K8 IC1007

$39.36
Picture of ISCAR SCIR 22-AD08-24K8 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide TiAlN

ISCAR SCIR 22-AD08-24K8 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide TiAlN

ANSI: SCIR 22-AD08-24K8 IC1007

ISO: SCIR 22-AD08-24K8 IC1007

$39.36
Picture of ISCAR SCIR22-AR10-25K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.004 Corner Radius

ISCAR SCIR22-AR10-25K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.004 Corner Radius

ANSI: SCIR22-AR10-25K8 IC1007

ISO: SCIR22-AR10-25K8 IC1007

$39.36
Picture of ISCAR SCIR22-AR00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIR22-AR00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIR22-AR00-25K16 IC1007

ISO: SCIR22-AR00-25K16 IC1007

$39.36
Picture of ISCAR SCIR22-ERA00-08K0 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIR22-ERA00-08K0 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIR22-ERA00-08K0 IC1007

ISO: SCIR22-ERA00-08K0 IC1007

$39.36
Picture of ISCAR SCIR22-BRA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ISCAR SCIR22-BRA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ANSI: SCIR22-BRA08-05K8 IC1007

ISO: SCIR22-BRA08-05K8 IC1007

$39.36
Picture of ISCAR SCIR22-BRA00-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN

ISCAR SCIR22-BRA00-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN

ANSI: SCIR22-BRA00-05K8 IC1007

ISO: SCIR22-BRA00-05K8 IC1007

$39.36
Picture of ISCAR TIGERV 1700-200-CW IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.669 Wide TiAlN + AlTiN + TiN

ISCAR TIGERV 1700-200-CW IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.669 Wide TiAlN + AlTiN + TiN

ANSI: TIGERV 1700-200-CW IC808

ISO: TIGERV 1700-200-CW IC808

$39.29
Picture of ARNO ROUSE LST 083065-02FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius

ARNO ROUSE LST 083065-02FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius

ANSI: LST 083065-02FR-P AK1020

ISO: LST 083065-02FR-P AK1020

$39.29
Picture of SANDVIK N123G2-0300-0004-TM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0300-0004-TM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0300-0004-TM 1125

ISO: N123G2-0300-0004-TM 1125

$39.25
Picture of SANDVIK N123G2-0318-0003-GM 1145 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0318-0003-GM 1145 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0318-0003-GM 1145

ISO: N123G2-0318-0003-GM 1145

$39.25
Picture of SANDVIK N123G2-0318-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0318-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0318-0003-GM 1125

ISO: N123G2-0318-0003-GM 1125

$39.25
Picture of SANDVIK N123G2-0300-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0300-0003-GM 1125 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0300-0003-GM 1125

ISO: N123G2-0300-0003-GM 1125

$39.25
Picture of SANDVIK N123G2-0300-0003-TF 1125 Cut Off & Grooving Grooving,Groove Turning Insert

SANDVIK N123G2-0300-0003-TF 1125 Cut Off & Grooving Grooving,Groove Turning Insert

ANSI: N123G2-0300-0003-TF 1125

ISO: N123G2-0300-0003-TF 1125

$39.25
Picture of SANDVIK N123G2-0300-0003-TF 1105 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123G2-0300-0003-TF 1105 Grooving,Groove Turning Insert Clamp Down

ANSI: N123G2-0300-0003-TF 1105

ISO: N123G2-0300-0003-TF 1105

$39.25
Picture of INGERSOLL TDIT8.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT8.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT8.00E-0.80 TT5100

ISO: TDIT8.00E-0.80 TT5100

$39.24
Picture of INGERSOLL TDIT8.00E-1.20 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.047 Corner Radius TiCN

INGERSOLL TDIT8.00E-1.20 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.047 Corner Radius TiCN

ANSI: TDIT8.00E-1.20 TT7220

ISO: TDIT8.00E-1.20 TT7220

$39.24
Picture of INGERSOLL TDIT8.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN

INGERSOLL TDIT8.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN

ANSI: TDIT8.00E-0.80 TT7220

ISO: TDIT8.00E-0.80 TT7220

$39.24
Picture of SANDVIK N151.2-800-60-4U 235 Grooving,Groove Turning Insert Clamp Down

SANDVIK N151.2-800-60-4U 235 Grooving,Groove Turning Insert Clamp Down

ANSI: N151.2-800-60-4U 235

ISO: N151.2-800-60-4U 235

$39.14