Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR GIF 6.35-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIF 6.35-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIF 6.35-0.50 IC8250

ISO: GIF 6.35-0.50 IC8250

$45.78
Picture of ISCAR GIF 8.00-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ISCAR GIF 8.00-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ANSI: GIF 8.00-0.80 IC806

ISO: GIF 8.00-0.80 IC806

$45.78
Picture of ISCAR GIF 8.00E-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIF 8.00E-1.20 IC808 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIF 8.00E-1.20 IC808

ISO: GIF 8.00E-1.20 IC808

$45.78
Picture of ISCAR GIP 6.00E-1.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIP 6.00E-1.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIP 6.00E-1.20 IC8250

ISO: GIP 6.00E-1.20 IC8250

$45.78
Picture of ISCAR GIF 5.90-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.232 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.90-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.232 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.90-0.20 IC8250

ISO: GIF 5.90-0.20 IC8250

$45.78
Picture of ISCAR GIF 8.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIF 8.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIF 8.00E-0.40 IC808

ISO: GIF 8.00E-0.40 IC808

$45.78
Picture of ISCAR GIP 6.00E-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIP 6.00E-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIP 6.00E-0.80 IC5010

ISO: GIP 6.00E-0.80 IC5010

$45.78
Picture of ISCAR GIF 6.00E-1.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIF 6.00E-1.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.047 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIF 6.00E-1.20 IC8250

ISO: GIF 6.00E-1.20 IC8250

$45.78
Picture of ISCAR GIP 5.55E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.219 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.55E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.219 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.55E-0.55 IC8250

ISO: GIP 5.55E-0.55 IC8250

$45.78
Picture of ISCAR GIF 8.00-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.315 Wide AlTiN

ISCAR GIF 8.00-0.40 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.315 Wide AlTiN

ANSI: GIF 8.00-0.40 IC806

ISO: GIF 8.00-0.40 IC806

$45.78
Picture of ISCAR GIF 8.00E-1.20 IC830 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIF 8.00E-1.20 IC830 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIF 8.00E-1.20 IC830

ISO: GIF 8.00E-1.20 IC830

$45.78
Picture of ISCAR GIP 6.35E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIP 6.35E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIP 6.35E-0.80 IC8250

ISO: GIP 6.35E-0.80 IC8250

$45.78
Picture of ISCAR GIF 6.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIF 6.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIF 6.00E-0.80 IC8250

ISO: GIF 6.00E-0.80 IC8250

$45.78
Picture of ISCAR GIF 6.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIF 6.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIF 6.00E-0.40 IC8250

ISO: GIF 6.00E-0.40 IC8250

$45.78
Picture of ISCAR GIF 8.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIF 8.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIF 8.00E-0.80 IC808

ISO: GIF 8.00E-0.80 IC808

$45.78
Picture of ISCAR GIF 6.35-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIF 6.35-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIF 6.35-0.50 IC8250

ISO: GIF 6.35-0.50 IC8250

$45.78
Picture of ISCAR GIPI 6.35E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 6.35E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 6.35E-0.55 IC8250

ISO: GIPI 6.35E-0.55 IC8250

$45.78
Picture of ISCAR GIF 8.00E-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ISCAR GIF 8.00E-0.80 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ANSI: GIF 8.00E-0.80 IC806

ISO: GIF 8.00E-0.80 IC806

$45.78
Picture of ISCAR GIFI 6.00E-0.80 IC8250 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 6.00E-0.80 IC8250 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 6.00E-0.80 IC8250

ISO: GIFI 6.00E-0.80 IC8250

$45.78
Picture of ISCAR GIF 8.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ISCAR GIF 8.00E-0.80 IC807 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ANSI: GIF 8.00E-0.80 IC807

ISO: GIF 8.00E-0.80 IC807

$45.78
Picture of ARNO ROUSE LST 083065-008FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 083065-008FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ANSI: LST 083065-008FR-P AP4020

ISO: LST 083065-008FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560-008FR-P AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 082560-008FR-P AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.003 Corner Radius TiCN

ANSI: LST 082560-008FR-P AP5020

ISO: LST 082560-008FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-008FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 083065-008FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ANSI: LST 083065-008FR-P AP5020

ISO: LST 083065-008FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 080802FR-008 AP5020 Grooving,Groove Turning Insert 0.032 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 080802FR-008 AP5020 Grooving,Groove Turning Insert 0.032 Wide 0.003 Corner Radius TiCN

ANSI: LST 080802FR-008 AP5020

ISO: LST 080802FR-008 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-008FR-P AP4010 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 083065-008FR-P AP4010 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ANSI: LST 083065-008FR-P AP4010

ISO: LST 083065-008FR-P AP4010

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 081060-008FR-SP AP5010 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LRD 081060-008FR-SP AP5010 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LRD 081060-008FR-SP AP5010

ISO: LRD 081060-008FR-SP AP5010

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-008FR-P AP5010 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 083065-008FR-P AP5010 Grooving,Groove Turning Insert 0.118 Wide 0.003 Corner Radius TiCN

ANSI: LST 083065-008FR-P AP5010

ISO: LST 083065-008FR-P AP5010

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530-008FR-P AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.003 Corner Radius TiCN

ARNO ROUSE LST 081530-008FR-P AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.003 Corner Radius TiCN

ANSI: LST 081530-008FR-P AP5020

ISO: LST 081530-008FR-P AP5020

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTA600-300 TH10 Clamp Down Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

TUNGALOY DTA600-300 TH10 Clamp Down Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: DTA600-300 TH10

ISO: DTA600-300 TH10

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 T9225

ISO: DTI300-040 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX6-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.236 Wide

TUNGALOY DTX6-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.236 Wide

ANSI: DTX6-080 GH130

ISO: DTX6-080 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX6-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.236 Wide

TUNGALOY DTX6-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.236 Wide

ANSI: DTX6-080 AH725

ISO: DTX6-080 AH725

Call (262) 251-4020 for pricing
Picture of SECO LCMF160504-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160504-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160504-0500-MT TGP25

ISO: LCMF160504-0500-MT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160504-0500-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160504-0500-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160504-0500-MT TGK1500

ISO: LCMF160504-0500-MT TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160504-0500-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160504-0500-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160504-0500-MC TGP25

ISO: LCMF160504-0500-MC TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160504-0500-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160504-0500-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160504-0500-FT TGP25

ISO: LCMF160504-0500-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160504-0500-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160504-0500-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160504-0500-MG TGP25

ISO: LCMF160504-0500-MG TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160508-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160508-0500-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160508-0500-MT TGP25

ISO: LCMF160508-0500-MT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMR1606M0-0600-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR1606M0-0600-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR1606M0-0600-MP TGP25

ISO: LCMR1606M0-0600-MP TGP25

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX5-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY DTX5-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: DTX5-040 T9225

ISO: DTX5-040 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR SCIL41-ELA00-10K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL41-ELA00-10K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL41-ELA00-10K0 IC1008

ISO: SCIL41-ELA00-10K0 IC1008

$44.93
Picture of ISCAR SCIL41-AL00-33K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.250 Corner Radius

ISCAR SCIL41-AL00-33K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.250 Corner Radius

ANSI: SCIL41-AL00-33K16 IC1008

ISO: SCIL41-AL00-33K16 IC1008

$44.93
Picture of ISCAR SCIL41-AD08-30K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL41-AD08-30K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL41-AD08-30K8 IC1008

ISO: SCIL41-AD08-30K8 IC1008

$44.93
Picture of ISCAR SCIL41-BLA08-10K8 IC1008 Groove Turning,Turning Square Back Turning Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL41-BLA08-10K8 IC1008 Groove Turning,Turning Square Back Turning Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL41-BLA08-10K8 IC1008

ISO: SCIL41-BLA08-10K8 IC1008

$44.93
Picture of ISCAR SCIR 41-AR00-33K16 IC1008 Cut Off, Grooving,Groove Turning Insert 0.130 Wide TiAIN + TiN

ISCAR SCIR 41-AR00-33K16 IC1008 Cut Off, Grooving,Groove Turning Insert 0.130 Wide TiAIN + TiN

ANSI: SCIR 41-AR00-33K16 IC1008

ISO: SCIR 41-AR00-33K16 IC1008

$44.93
Picture of TUNGALOY DTR8-400 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.157 Corner Radius 0.315 Wide

TUNGALOY DTR8-400 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.157 Corner Radius 0.315 Wide

ANSI: DTR8-400 T9225

ISO: DTR8-400 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE265-015 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.104 Wide

TUNGALOY DTE265-015 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.104 Wide

ANSI: DTE265-015 T9225

ISO: DTE265-015 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY GIR6325-02 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.098 Wide

TUNGALOY GIR6325-02 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.098 Wide

ANSI: GIR6325-02 NS9530

ISO: GIR 6325-02 NS9530

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-02FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 083065-02FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ANSI: LST 083065-02FR-P AP4020

ISO: LST 083065-02FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-02FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 083065-02FR-P AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius TiCN

ANSI: LST 083065-02FR-P AP5020

ISO: LST 083065-02FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIF 10.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.394 Wide

ISCAR GIF 10.00E-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.394 Wide

ANSI: GIF 10.00E-1.20 IC20

ISO: GIF 10.00E-1.20 IC20

$44.62
Picture of ISCAR GDPY 10.00-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ISCAR GDPY 10.00-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ANSI: GDPY 10.00-0.80 IC20

ISO: GDPY 10.00-0.80 IC20

$44.62
Picture of ISCAR GIF 10.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ISCAR GIF 10.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide

ANSI: GIF 10.00E-0.80 IC20

ISO: GIF 10.00E-0.80 IC20

$44.62
Picture of ARNO ROUSE LST 081530-02FR-P AP5010 Grooving,Groove Turning Insert 0.059 Wide 0.007 Corner Radius TiCN

ARNO ROUSE LST 081530-02FR-P AP5010 Grooving,Groove Turning Insert 0.059 Wide 0.007 Corner Radius TiCN

ANSI: LST 081530-02FR-P AP5010

ISO: LST 081530-02FR-P AP5010

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR400-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR400-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

ANSI: DTR400-200 GH130

ISO: DTR400-200 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR400-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR400-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTR400-200 AH7025

ISO: DTR400-200 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTIU400-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTIU400-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTIU400-200 AH725

ISO: DTIU400-200 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTIU400-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTIU400-200 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTIU400-200 AH7025

ISO: DTIU400-200 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR400-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR400-200 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: DTR400-200 AH725

ISO: DTR400-200 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTIU400-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

TUNGALOY DTIU400-200 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.078 Corner Radius 0.157 Wide

ANSI: DTIU400-200 GH130

ISO: DTIU400-200 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGD300 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY CGD300 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: CGD300 AH120

ISO: CGD300 AH120

Call (262) 251-4020 for pricing
Picture of SECO LCMF1604M0-0400-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1604M0-0400-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1604M0-0400-MP TGK1500

ISO: LCMF1604M0-0400-MP TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF1304M0-0400-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1304M0-0400-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1304M0-0400-MP TGK1500

ISO: LCMF1304M0-0400-MP TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF1304M0-0400-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1304M0-0400-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1304M0-0400-MP TGP25

ISO: LCMF1304M0-0400-MP TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF2802M0-0200-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF2802M0-0200-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF2802M0-0200-MP TGK1500

ISO: LCMF2802M0-0200-MP TGK1500

Call (262) 251-4020 for pricing
Picture of ISCAR GEPI 3.00-1.50UN IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GEPI 3.00-1.50UN IC528 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GEPI 3.00-1.50UN IC528

ISO: GEPI 3.00-1.50UN IC528

$44.00
Picture of ISCAR TIGERV 2006-152 IC20 Grooving,Groove Turning Insert 0.060 Corner Radius 0.790 Wide

ISCAR TIGERV 2006-152 IC20 Grooving,Groove Turning Insert 0.060 Corner Radius 0.790 Wide

ANSI: TIGERV 2006-152 IC20

ISO: TIGERV 2006-152 IC20

$44.00
Picture of TUNGALOY DTIU300-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTIU300-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTIU300-150 AH725

ISO: DTIU300-150 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR300-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR300-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

ANSI: DTR300-150 GH130

ISO: DTR300-150 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTIU300-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

TUNGALOY DTIU300-150 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.059 Corner Radius 0.118 Wide

ANSI: DTIU300-150 GH130

ISO: DTIU300-150 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR300-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR300-150 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTR300-150 AH725

ISO: DTR300-150 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR300-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR300-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTR300-150 AH7025

ISO: DTR300-150 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTIU300-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

TUNGALOY DTIU300-150 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.059 Corner Radius 0.118 Wide

ANSI: DTIU300-150 AH7025

ISO: DTIU300-150 AH7025

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 6.35E-3.18 IC9054 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIP 6.35E-3.18 IC9054 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIP 6.35E-3.18 IC9054

ISO: GIP 6.35E-3.18 IC9054

$43.54
Picture of ISCAR GIF 8.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIF 8.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIF 8.00E-0.80 IC428

ISO: GIF 8.00E-0.80 IC428

$43.54
Picture of ISCAR GIF 6.00E-3.00 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIF 6.00E-3.00 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIF 6.00E-3.00 IC830

ISO: GIF 6.00E-3.00 IC830

$43.54
Picture of ISCAR GIA 8.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIA 8.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIA 8.00K-0.80 IC428

ISO: GIA 8.00K-0.80 IC428

$43.54
Picture of ISCAR GIA 6.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIA 6.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIA 6.00K-0.80 IC5010

ISO: GIA 6.00K-0.80 IC5010

$43.54
Picture of ISCAR GIF 8.00E-1.20 IC428 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TIC + Al2O3

ISCAR GIF 8.00E-1.20 IC428 Grooving,Groove Turning Insert 0.047 Corner Radius 0.315 Wide TIC + Al2O3

ANSI: GIF 8.00E-1.20 IC428

ISO: GIF 8.00E-1.20 IC428

$43.54
Picture of ARNO ROUSE LST 081025-008FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide 0.003 Corner Radius

ARNO ROUSE LST 081025-008FR-P AK1020 Grooving,Groove Turning Insert 0.039 Wide 0.003 Corner Radius

ANSI: LST 081025-008FR-P AK1020

ISO: LST 081025-008FR-P AK1020

Call (262) 251-4020 for pricing
Picture of ISCAR GPV 3-2.34-1 IC8250 Cut Off,Grooving,Groove Turning Insert 0.013 Corner Radius 0.110 Wide TiCN + Al2O3 + TiN

ISCAR GPV 3-2.34-1 IC8250 Cut Off,Grooving,Groove Turning Insert 0.013 Corner Radius 0.110 Wide TiCN + Al2O3 + TiN

ANSI: GPV 3-2.34-1 IC8250

ISO: GPV 3-2.34-1 IC8250

$43.46
Picture of TUNGALOY DTE400-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.157 Wide

TUNGALOY DTE400-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.157 Wide

ANSI: DTE400-080 GH130

ISO: DTE400-080 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE400-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTE400-040 AH7025

ISO: DTE400-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE415-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.163 Wide

TUNGALOY DTE415-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.163 Wide

ANSI: DTE415-015 AH725

ISO: DTE415-015 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

TUNGALOY DTE400-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

ANSI: DTE400-080 AH725

ISO: DTE400-080 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE400-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTE400-040 AH725

ISO: DTE400-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE400-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTE400-040 GH130

ISO: DTE400-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE415-015 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.163 Wide

TUNGALOY DTE415-015 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.163 Wide

ANSI: DTE415-015 AH7025

ISO: DTE415-015 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE415-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.163 Wide

TUNGALOY DTE415-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.163 Wide

ANSI: DTE415-015 GH130

ISO: DTE415-015 GH130

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 080504FR-P AP4020 Groove Turning Insert 0.020 Wide Carbide TiCN

ARNO ROUSE LRD 080504FR-P AP4020 Groove Turning Insert 0.020 Wide Carbide TiCN

ANSI: LRD 080504FR-P AP4020

ISO: LRD 080504FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA40-10008N-M1 AP5020 Grooving,Groove Turning Insert 0.394 Wide 0.031 Corner Radius TiCN

ARNO ROUSE SA40-10008N-M1 AP5020 Grooving,Groove Turning Insert 0.394 Wide 0.031 Corner Radius TiCN

ANSI: SA40-10008N-M1 AP5020

ISO: SA40-10008N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of SECO LCMF160605-A250-FT Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCMF160605-A250-FT Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCMF160605-A250-FT

ISO: LCMF160605-A250-FT

Call (262) 251-4020 for pricing
Picture of SECO LCMF160605-A250-MT Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCMF160605-A250-MT Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCMF160605-A250-MT

ISO: LCMF160605-A250-MT

Call (262) 251-4020 for pricing
Picture of TUNGALOY 15GR350 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.138 Wide

TUNGALOY 15GR350 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.138 Wide

ANSI: 15GR350 NS9530

ISO: 15GR350 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GDMY 840 IC9250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 840 IC9250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 840 IC9250

ISO: GDMY 840 IC9250

$42.84
Picture of ISCAR GDMY 840 IC5010 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 840 IC5010 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 840 IC5010

ISO: GDMY 840 IC5010

$42.84
Picture of TUNGALOY DTI400-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI400-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI400-040 AH725

ISO: DTI400-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI400-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTI400-040 AH7025

ISO: DTI400-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.157 Wide

TUNGALOY DTI400-080 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.031 Corner Radius 0.157 Wide

ANSI: DTI400-080 GH130

ISO: DTI400-080 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

TUNGALOY DTI400-080 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

ANSI: DTI400-080 AH725

ISO: DTI400-080 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI400-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTI400-040 GH130

ISO: DTI400-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

TUNGALOY DTI400-080 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.031 Corner Radius 0.157 Wide

ANSI: DTI400-080 AH7025

ISO: DTI400-080 AH7025

Call (262) 251-4020 for pricing
Picture of ISCAR GEPI 2.00-1.00UR IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GEPI 2.00-1.00UR IC528 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GEPI 2.00-1.00UR IC528

ISO: GEPI 2.00-1.00UR IC528

$42.69
Picture of ISCAR GEPI 2.00-1.00UL IC528 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GEPI 2.00-1.00UL IC528 Grooving,Groove Turing Insert 0.039 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GEPI 2.00-1.00UL IC528

ISO: GEPI 2.00-1.00UL IC528

$42.69
Picture of ISCAR GIP 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.78-2.39 IC8250

ISO: GIP 4.78-2.39 IC8250

$42.46
Picture of ISCAR GIF 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.00E-2.50 IC8250

ISO: GIF 5.00E-2.50 IC8250

$42.46
Picture of ISCAR GIF 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.78-2.39 IC8250

ISO: GIF 4.78-2.39 IC8250

$42.46
Picture of ISCAR GIP 5.00E-2.50 IC5010 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-2.50 IC5010 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-2.50 IC5010

ISO: GIP 5.00E-2.50 IC5010

$42.46
Picture of ISCAR GIFI 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 5.00E-2.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 5.00E-2.50 IC8250

ISO: GIFI 5.00E-2.50 IC8250

$42.46
Picture of ISCAR GIPI 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 4.78-2.39 IC8250 Cut Off,Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 4.78-2.39 IC8250

ISO: GIPI 4.78-2.39 IC8250

$42.46
Picture of TUNGALOY DTE300-020 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE300-020 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: DTE300-020 AH725

ISO: DTE300-020 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE315-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.124 Wide

TUNGALOY DTE315-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.124 Wide

ANSI: DTE315-015 AH725

ISO: DTE315-015 AH725

Call (262) 251-4020 for pricing
Picture of SECO LCEX110502-0270L-L30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110502-0270L-L30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110502-0270L-L30

ISO: LCEX110502-0270L-L30 CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE300-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTE300-040 GH130

ISO: DTE300-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE300-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTE300-040 AH725

ISO: DTE300-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE315-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.124 Wide

TUNGALOY DTE315-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.124 Wide

ANSI: DTE315-015 GH130

ISO: DTE315-015 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-020 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE300-020 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.007 Corner Radius 0.118 Wide

ANSI: DTE300-020 GH130

ISO: DTE300-020 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE315-015 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.124 Wide

TUNGALOY DTE315-015 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.124 Wide

ANSI: DTE315-015 AH7025

ISO: DTE315-015 AH7025

Call (262) 251-4020 for pricing
Picture of SECO LCEX110502-0270R-R30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX110502-0270R-R30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX110502-0270R-R30

ISO: LCEX110502-0270R-R30 CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE300-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTE300-040 AH7025

ISO: DTE300-040 AH7025

Call (262) 251-4020 for pricing
Picture of ISCAR SCIR22-ER00-07K10 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-07K10 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-07K10 IC1008

ISO: SCIR22-ER00-07K10 IC1008

$42.30
Picture of ISCAR SCIL22-AL00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIL22-AL00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIL22-AL00-25K16 IC1007

ISO: SCIL22-AL00-25K16 IC1007

$42.30
Picture of ISCAR SCIL 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIL 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIL 22-150NX080 IC1008

ISO: SCIL 22-150NX080 IC1008

$42.30
Picture of ISCAR SCIR22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-EL00-07K0 IC1008

ISO: SCIR22-EL00-07K0 IC1008

$42.30
Picture of ISCAR SCIL22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL22-AD08-24K8 IC1008

ISO: SCIL22-AD08-24K8 IC1008

$42.30
Picture of ISCAR SCIL22-AL10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIL22-AL10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIL22-AL10-25K8 IC1008

ISO: SCIL22-AL10-25K8 IC1008

$42.30
Picture of ISCAR SCIR22-BR08-10K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-BR08-10K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-BR08-10K15 IC1008

ISO: SCIR22-BR08-10K15 IC1008

$42.30
Picture of ISCAR SCIL22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-EL00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-EL00-07K0 IC1008

ISO: SCIL22-EL00-07K0 IC1008

$42.30
Picture of ISCAR SCIR22-BRA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ISCAR SCIR22-BRA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ANSI: SCIR22-BRA08-05K8 IC1007

ISO: SCIR22-BRA08-05K8 IC1007

$42.30
Picture of ISCAR SCIL22-EL00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-EL00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-EL00-03K0 IC1008

ISO: SCIL22-EL00-03K0 IC1008

$42.30
Picture of ISCAR SCIL 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIL 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIL 22-200NX080 IC1008

ISO: SCIL 22-200NX080 IC1008

$42.30
Picture of ISCAR SCIR22-AR00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-AR00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-AR00-25K16 IC1008

ISO: SCIR22-AR00-25K16 IC1008

$42.30
Picture of ISCAR SCIR22-ER00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-07K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-07K0 IC1008

ISO: SCIR22-ER00-07K0 IC1008

$42.30
Picture of ISCAR SCIR22-BR00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ISCAR SCIR22-BR00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ANSI: SCIR22-BR00-05K7 IC1008

ISO: SCIR22-BR00-05K7 IC1008

$42.30
Picture of ISCAR SCIR 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIR 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIR 22-250NX080 IC1008

ISO: SCIR 22-250NX080 IC1008

$42.30
Picture of ISCAR SCIL 22-AL10-25K8 IC1007 Groove Turning,Turning Insert 0.004 Corner Radius TiAlN

ISCAR SCIL 22-AL10-25K8 IC1007 Groove Turning,Turning Insert 0.004 Corner Radius TiAlN

ANSI: SCIL 22-AL10-25K8 IC1007

ISO: SCIL 22-AL10-25K8 IC1007

$42.30
Picture of ISCAR SCIR22-ERA00-08K0 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIR22-ERA00-08K0 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIR22-ERA00-08K0 IC1007

ISO: SCIR22-ERA00-08K0 IC1007

$42.30
Picture of ISCAR SCIR22-BRA00-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN

ISCAR SCIR22-BRA00-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN

ANSI: SCIR22-BRA00-05K8 IC1007

ISO: SCIR22-BRA00-05K8 IC1007

$42.30
Picture of ISCAR SCIR22-BR10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-BR10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-BR10-05K7 IC1008

ISO: SCIR22-BR10-05K7 IC1008

$42.30
Picture of ISCAR SCIR22-ER00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIR22-ER00-03K0 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIR22-ER00-03K0 IC1008

ISO: SCIR22-ER00-03K0 IC1008

$42.30
Picture of ISCAR SCIR22-BR08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-BR08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-BR08-10K7 IC1008

ISO: SCIR22-BR08-10K7 IC1008

$42.30
Picture of ISCAR SCIL22-BL10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIL22-BL10-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIL22-BL10-05K7 IC1008

ISO: SCIL22-BL10-05K7 IC1008

$42.30
Picture of ISCAR SCIR22-AR00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ISCAR SCIR22-AR00-25K16 IC1007 Groove Turning,Turning Square Carbide TiAlN

ANSI: SCIR22-AR00-25K16 IC1007

ISO: SCIR22-AR00-25K16 IC1007

$42.30
Picture of ISCAR SCIL22-BL00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ISCAR SCIL22-BL00-05K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN

ANSI: SCIL22-BL00-05K7 IC1008

ISO: SCIL22-BL00-05K7 IC1008

$42.30
Picture of ISCAR SCIR22-AR10-25K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.004 Corner Radius

ISCAR SCIR22-AR10-25K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.004 Corner Radius

ANSI: SCIR22-AR10-25K8 IC1007

ISO: SCIR22-AR10-25K8 IC1007

$42.30
Picture of ISCAR SCIL22-AL00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ISCAR SCIL22-AL00-25K16 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN

ANSI: SCIL22-AL00-25K16 IC1008

ISO: SCIL22-AL00-25K16 IC1008

$42.30
Picture of ISCAR SCIL22-BLA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ISCAR SCIL22-BLA08-05K8 IC1007 Groove Turning,Turning Square Back Turning Carbide TiAlN 0.003 Corner Radius

ANSI: SCIL22-BLA08-05K8 IC1007

ISO: SCIL22-BLA08-05K8 IC1007

$42.30
Picture of ISCAR SCIR22-BR10-05K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-BR10-05K15 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-BR10-05K15 IC1008

ISO: SCIR22-BR10-05K15 IC1008

$42.30
Picture of ISCAR SCIR22-AR10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ISCAR SCIR22-AR10-25K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.004 Corner Radius

ANSI: SCIR22-AR10-25K8 IC1008

ISO: SCIR22-AR10-25K8 IC1008

$42.30
Picture of ISCAR SCIL22-AD08-24K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.003 Corner Radius

ISCAR SCIL22-AD08-24K8 IC1007 Groove Turning,Turning Square Carbide TiAlN 0.003 Corner Radius

ANSI: SCIL22-AD08-24K8 IC1007

ISO: SCIL22-AD08-24K8 IC1007

$42.30
Picture of ISCAR SCIR22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIR22-AD08-24K8 IC1008 Groove Turning,Turning Square Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIR22-AD08-24K8 IC1008

ISO: SCIR22-AD08-24K8 IC1008

$42.30
Picture of ISCAR SCIR 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIR 22-200NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIR 22-200NX080 IC1008

ISO: SCIR 22-200NX080 IC1008

$42.30
Picture of ISCAR SCIL 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIL 22-250NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIL 22-250NX080 IC1008

ISO: SCIL 22-250NX080 IC1008

$42.30
Picture of ISCAR SCIR 22-AD08-24K8 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide TiAlN

ISCAR SCIR 22-AD08-24K8 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.094 Wide TiAlN

ANSI: SCIR 22-AD08-24K8 IC1007

ISO: SCIR 22-AD08-24K8 IC1007

$42.30
Picture of ISCAR SCIL22-BL08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ISCAR SCIL22-BL08-10K7 IC1008 Groove Turning,Turning Square Back Boring Carbide TiAIN + TiN 0.003 Corner Radius

ANSI: SCIL22-BL08-10K7 IC1008

ISO: SCIL22-BL08-10K7 IC1008

$42.30
Picture of ISCAR SCIR 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIR 22-150NX080 IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIR 22-150NX080 IC1008

ISO: SCIR 22-150NX080 IC1008

$42.30
Picture of SECO 10ER0.80FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10ER0.80FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10ER0.80FD CP500

ISO: 10ER0.80FD CP500

Call (262) 251-4020 for pricing
Picture of SECO 10NR0.50FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10NR0.50FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10NR0.50FD CP500

ISO: 10NR0.50FD CP500

Call (262) 251-4020 for pricing
Picture of SECO 10ER0.50FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10ER0.50FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10ER0.50FD CP500

ISO: 10ER0.50FD CP500

Call (262) 251-4020 for pricing
Picture of SECO 10NR0.80FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10NR0.80FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10NR0.80FD CP500

ISO: 10NR0.80FD CP500

Call (262) 251-4020 for pricing
Picture of SECO 10ER1.00FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10ER1.00FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10ER1.00FD CP500

ISO: 10ER1.00FD CP500

Call (262) 251-4020 for pricing
Picture of SECO 10NR1.00FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO 10NR1.00FD CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: 10NR1.00FD CP500

ISO: 10NR1.00FD CP500

Call (262) 251-4020 for pricing
Picture of ISCAR TIGERV 1700-200-CW IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.669 Wide TiAlN + AlTiN + TiN

ISCAR TIGERV 1700-200-CW IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.669 Wide TiAlN + AlTiN + TiN

ANSI: TIGERV 1700-200-CW IC808

ISO: TIGERV 1700-200-CW IC808

$42.22
Picture of SECO LCMF1303M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1303M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1303M0-0300-MP TGP25

ISO: LCMF1303M0-0300-MP TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF1603M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1603M0-0300-MP TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1603M0-0300-MP TGP25

ISO: LCMF1603M0-0300-MP TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF1303M0-0300-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1303M0-0300-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1303M0-0300-MP TGK1500

ISO: LCMF1303M0-0300-MP TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.5TRR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.5TRR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.5TRR

ISO: LCEX1105-1.5TRR CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX4-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTX4-040 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTX4-040 T9225

ISO: DTX4-040 T9225

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065-02FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius

ARNO ROUSE LST 083065-02FR-P AK1020 Grooving,Groove Turning Insert 0.118 Wide 0.007 Corner Radius

ANSI: LST 083065-02FR-P AK1020

ISO: LST 083065-02FR-P AK1020

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTF4-040-L T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTF4-040-L T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTF4-040-L T9225

ISO: DTF4-040-L T9225

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-2.0TRR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-2.0TRR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-2.0TRR

ISO: LCEX1105-2.0TRR CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.5TRL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.5TRL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.5TRL

ISO: LCEX1105-1.5TRL CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-2.0TRL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-2.0TRL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-2.0TRL

ISO: LCEX1105-2.0TRL CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTF4-040-R T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTF4-040-R T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTF4-040-R T9225

ISO: DTF4-040-R T9225

Call (262) 251-4020 for pricing
Picture of SECO LCMF130402-0400-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF130402-0400-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF130402-0400-FT CP500

ISO: LCMF130402-0400-FT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-MCR15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160402-0400-MCR15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160402-0400-MCR15 CP600

ISO: LCMF160402-0400-MCR15 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF160408-0400-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160408-0400-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160408-0400-FT CP500

ISO: LCMF160408-0400-FT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-MCL15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160402-0400-MCL15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160402-0400-MCL15 CP600

ISO: LCMF160402-0400-MCL15 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-MCL6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160402-0400-MCL6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160402-0400-MCL6 CP600

ISO: LCMF160402-0400-MCL6 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCGF130402-0400-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGF130402-0400-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGF130402-0400-GS

ISO: LCGF130402-0400-GS

Call (262) 251-4020 for pricing
Picture of SECO LCGF160402-0400-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGF160402-0400-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGF160402-0400-GS

ISO: LCGF160402-0400-GS

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160402-0400-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160402-0400-MC CP600

ISO: LCMF160402-0400-MC CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF130404-0400-MC Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF130404-0400-MC Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF130404-0400-MC

ISO: LCMF130404-0400-MC

Call (262) 251-4020 for pricing
Picture of SECO LCMF160408-0400-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160408-0400-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160408-0400-MT CP500

ISO: LCMF160408-0400-MT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-MCR6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160402-0400-MCR6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160402-0400-MCR6 CP600

ISO: LCMF160402-0400-MCR6 CP600

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 AH725

ISO: DTI300-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 AH7025

ISO: DTI300-040 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 GH130

ISO: DTI300-040 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR PENTA 17-300NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ISCAR PENTA 17-300NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ANSI: PENTA 17-300NP08RS IC1008

ISO: PENTA 17-300NP08RS IC1008

$41.83
Picture of ARNO ROUSE SA24-1500EN-S1G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE SA24-1500EN-S1G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: SA24-1500EN-S1G AP5020

ISO: SA24-1500EN-S1G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1500EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE SA24-1500EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: SA24-1500EL-S1-15G AP5020

ISO: SA24-1500EL-S1-15G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1500ER-S1-15 AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE SA24-1500ER-S1-15 AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: SA24-1500ER-S1-15 AP5020

ISO: SA24-1500ER-S1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 6.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIP 6.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIP 6.00E-0.80 IC808

ISO: GIP 6.00E-0.80 IC808

$41.76
Picture of ISCAR GIF 6.35-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR GIF 6.35-0.50 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: GIF 6.35-0.50 IC808

ISO: GIF 6.35-0.50 IC808

$41.76
Picture of ISCAR GIF 6.35-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR GIF 6.35-0.55 IC808 Grooving,Groove Turning Insert 0.022 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: GIF 6.35-0.55 IC808

ISO: GIF 6.35-0.55 IC808

$41.76
Picture of ISCAR GIP 6.35E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide AlTiN + TiN

ISCAR GIP 6.35E-0.80 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide AlTiN + TiN

ANSI: GIP 6.35E-0.80 IC830

ISO: GIP 6.35E-0.80 IC830

$41.76
Picture of ISCAR GIF 6.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIF 6.00E-0.40 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIF 6.00E-0.40 IC808

ISO: GIF 6.00E-0.40 IC808

$41.76
Picture of ISCAR GIP 6.35E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR GIP 6.35E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: GIP 6.35E-0.80 IC808

ISO: GIP 6.35E-0.80 IC808

$41.76
Picture of ISCAR GIF 5.90-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.232 Wide TiAlN + AlTiN + TiN

ISCAR GIF 5.90-0.20 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.232 Wide TiAlN + AlTiN + TiN

ANSI: GIF 5.90-0.20 IC808

ISO: GIF 5.90-0.20 IC808

$41.76
Picture of ISCAR GIF 6.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIF 6.00E-0.80 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIF 6.00E-0.80 IC808

ISO: GIF 6.00E-0.80 IC808

$41.76