Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR TGMF 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 525 IC8250

ISO: TGMF 525 IC8250

$27.53
Picture of ISCAR GIPY 8.00-4.00 IC320 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN

ISCAR GIPY 8.00-4.00 IC320 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN

ANSI: GIPY 8.00-4.00 IC320

ISO: GIPY 8.00-4.00 IC320

$27.53
Picture of ISCAR GIPY 8.00-4.00 IC907 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAIN + TiN

ISCAR GIPY 8.00-4.00 IC907 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAIN + TiN

ANSI: GIPY 8.00-4.00 IC907

ISO: GIPY 8.00-4.00 IC907

$27.53
Picture of ISCAR FGMA 630 IC07 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR FGMA 630 IC07 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: FGMA 630 IC07

ISO: FGMA 630 IC07

$27.45
Picture of TUNGALOY ETX6-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.236 Wide

TUNGALOY ETX6-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.236 Wide

ANSI: ETX6-040 AH725

ISO: ETX6-040 AH725

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP2240 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP2240 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP2240

ISO: SA24-2503N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ISCAR GIPA 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIPA 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIPA 3.00-1.50 IC20

ISO: GIPA 3.00-1.50 IC20

$27.14
Picture of ISCAR GIPA 4.00-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIPA 4.00-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIPA 4.00-2.00 IC20

ISO: GIPA 4.00-2.00 IC20

$27.14
Picture of ARNO ROUSE SA24-1502R-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502R-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502R-S1 AP5020

ISO: SA24-1502R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-S1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-1502N-S1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-1502N-S1 AM5040

ISO: SA24-1502N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502N-S1 AP5020

ISO: SA24-1502N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502N-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502N-T1 AP5020

ISO: SA24-1502N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502N-T1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-1502N-T1 AM5040 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-1502N-T1 AM5040

ISO: SA24-1502N-T1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1502R-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-1502R-T1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA24-1502R-T1 AP5020

ISO: SA24-1502R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDXT4E-0.4 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXT4E-0.4 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXT4E-0.4 TT7505

ISO: TDXT4E-0.4 TT7505

$26.84
Picture of INGERSOLL TDXT4E-0.4 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN + TiN

INGERSOLL TDXT4E-0.4 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius AlTiN + TiN

ANSI: TDXT4E-0.4 TT6080

ISO: TDXT4E-0.4 TT6080

$26.84
Picture of INGERSOLL TDC4 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC4 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiCN

ANSI: TDC4 TT7220

ISO: TDC4 TT7220

$26.84
Picture of INGERSOLL TDC4 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiCN

INGERSOLL TDC4 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiCN

ANSI: TDC4 TT8020

ISO: TDC4 TT8020

$26.84
Picture of INGERSOLL TDC4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiAIN + TiN

INGERSOLL TDC4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiAIN + TiN

ANSI: TDC4 TT9080

ISO: TDC4 TT9080

$26.84
Picture of INGERSOLL TDXT4E-0.4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiAIN + TiN

INGERSOLL TDXT4E-0.4 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiAIN + TiN

ANSI: TDXT4E-0.4 TT9080

ISO: TDXT4E-0.4 TT9080

$26.84
Picture of INGERSOLL TDXT4E-0.4 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXT4E-0.4 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXT4E-0.4 TT5100

ISO: TDXT4E-0.4 TT5100

$26.84
Picture of INGERSOLL TDIT5.00E-2.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDIT5.00E-2.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDIT5.00E-2.50 K10

ISO: TDIT5.00E-2.50 K10

$26.81
Picture of ARNO ROUSE SA35-2002L-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002L-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002L-S1 -12 AM5040

ISO: SA35-2002L-S1 -12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-M1 AP5020

ISO: SA35-2002N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002N-S1 AM5040

ISO: SA35-2002N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-T1 AP2220

ISO: SA35-2002N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002R-S1-12 AP5020

ISO: SA35-2002R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002R-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002R-M1 AP5020

ISO: SA35-2002R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-T1 AP5020

ISO: SA35-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-S1 AP5020

ISO: SA35-2002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002R-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA35-2002R-S1 -12 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA35-2002R-S1 -12 AM5040

ISO: SA35-2002R-S1 -12 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-F1 AP2220

ISO: SA35-2002N-F1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-F1 AP5020

ISO: SA35-2002N-F1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002L-S1 -12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002L-S1 -12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002L-S1 -12 AP5020

ISO: SA35-2002L-S1 -12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-2002L-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002L-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002L-M1 AP5020

ISO: SA35-2002L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTD3 AH725 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

TUNGALOY CTD3 AH725 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.118 Wide

ANSI: CTD3 AH725

ISO: CTD3 AH725

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIP 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIP 4.00E-2.00 IC20

ISO: GIP 4.00E-2.00 IC20

$26.68
Picture of ISCAR GIFI 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIFI 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIFI 4.00E-2.00 IC20

ISO: GIFI 4.00E-2.00 IC20

$26.68
Picture of ISCAR GIF 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIF 4.00E-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIF 4.00E-2.00 IC20

ISO: GIF 4.00E-2.00 IC20

$26.68
Picture of ISCAR TGMP 506 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR TGMP 506 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: TGMP 506 IC8250

ISO: TGMP 506 IC8250

$26.60
Picture of ISCAR TGMF 508 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 508 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 508 IC8250

ISO: TGMF 508 IC8250

$26.60
Picture of ISCAR TGMA 508K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ISCAR TGMA 508K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TGMA 508K IC5010

ISO: TGMA 508K IC5010

$26.60
Picture of ISCAR TAGB 1008Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 1008Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 1008Y IC8250

ISO: TAGB 1008Y IC8250

$26.57
Picture of ARNO ROUSE SA24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-T1 AP5020

ISO: SA24-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002R-S1-12 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002R-S1-12 AP5020

ISO: SA24-3002R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-1502N-S1 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.008 Corner Radius TiCN

ANSI: SA16-1502N-S1 AP5020

ISO: SA16-1502N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 3.00-1250R IC20 Grooving,Groove Turning Insert 0.118 Wide

ISCAR GIP 3.00-1250R IC20 Grooving,Groove Turning Insert 0.118 Wide

ANSI: GIP 3.00-1250R IC20

ISO: GIP 3.00-1250R IC20

$26.29
Picture of ISCAR GIP 3.00-1250L IC20 Grooving,Groove Turning Insert 0.118 Wide

ISCAR GIP 3.00-1250L IC20 Grooving,Groove Turning Insert 0.118 Wide

ANSI: GIP 3.00-1250L IC20

ISO: GIP 3.00-1250L IC20

$26.29
Picture of ISCAR GIMY 1008 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide AlTiN + TiN

ISCAR GIMY 1008 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide AlTiN + TiN

ANSI: GIMY 1008 IC830

ISO: GIMY 1008 IC830

$26.29
Picture of ISCAR GIMY 1008 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 1008 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 1008 IC808

ISO: GIMY 1008 IC808

$26.29
Picture of ISCAR GIP 0.80-0.00 IC20 Grooving,Groove Turning Insert 0.031 Wide

ISCAR GIP 0.80-0.00 IC20 Grooving,Groove Turning Insert 0.031 Wide

ANSI: GIP 0.80-0.00 IC20

ISO: GIP 0.80-0.00 IC20

$26.22
Picture of ARNO ROUSE SA24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-T1 AP2240

ISO: SA24-2002N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003L-S1 AM5040

ISO: SA24-3003L-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-S1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-S1 AP2240

ISO: SA24-2002N-S1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-T1 AP2220

ISO: SA24-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-T1 AP5020

ISO: SA24-3003L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003N-S1 AM5040

ISO: SA24-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-S1 AM5040

ISO: SA24-3003R-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP5020

ISO: SA24-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP2220

ISO: SA24-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-M1 AP5020

ISO: SA24-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-T1 AP5020

ISO: SA24-3003R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M3 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-3002N-M3 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SE24-3002N-M3 AP5020

ISO: SE24-3002N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SE24-3002N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius AlTiN

ANSI: SE24-3002N-M2 AM5040

ISO: SE24-3002N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-T1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-T1 AP2240

ISO: SE24-2002N-T1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP5020

ISO: SE24-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-T1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-T1 AM5040

ISO: SA24-3003R-T1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003N-S1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003N-S1 AP5030

ISO: SA24-3003N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SE24-3003N-M2 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SE24-3003N-M2 AM5040

ISO: SE24-3003N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP2240 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP2240

ISO: SA24-2002N-M1 AP2240

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP2220

ISO: SA24-3003L-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3002N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-3002N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SE24-3002N-M2 AP5020

ISO: SE24-3002N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-M2 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-M2 AP5020

ISO: SE24-3003N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SE24-3003N-T1 AP5030 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SE24-3003N-T1 AP5030

ISO: SE24-3003N-T1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-M1 AP5020

ISO: SA24-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP2220

ISO: SA24-3003R-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003L-T1 AP2220

ISO: SA24-3003L-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24-3003R-M1 AP5020

ISO: SA24-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIP 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIP 3.00-1.50 IC20

ISO: GIP 3.00-1.50 IC20

$26.14
Picture of ISCAR GIP 3.00E-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIP 3.00E-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIP 3.00E-1.50 IC20

ISO: GIP 3.00E-1.50 IC20

$26.14
Picture of ISCAR GIP 3.18-1.59 IC20 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ISCAR GIP 3.18-1.59 IC20 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ANSI: GIP 3.18-1.59 IC20

ISO: GIP 3.18-1.59 IC20

$26.14
Picture of ISCAR GIPI 3.18-1.59 IC20 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ISCAR GIPI 3.18-1.59 IC20 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ANSI: GIPI 3.18-1.59 IC20

ISO: GIPI 3.18-1.59 IC20

$26.06
Picture of ARNO ROUSE SA35-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA35-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA35-2002N-M1 AP2220

ISO: SA35-2002N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-T1 AP5020

ISO: SA16-3003L-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003N-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003N-S1 AM5040

ISO: SA16-3003N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003L-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003L-S1 AM5040

ISO: SA16-3003L-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-M1 AP2220

ISO: SA16-3003L-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-M1 AP5020

ISO: SA16-3003L-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA16-3003R-S1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA16-3003R-S1 AM5040

ISO: SA16-3003R-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-M1 AP2220

ISO: SA16-3003R-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003L-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003L-T1 AP2220

ISO: SA16-3003L-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-M1 AP5020

ISO: SA16-3003R-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-T1 AP5020

ISO: SA16-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-T1 AP5020

ISO: SA16-3003R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003R-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003R-T1 AP2220

ISO: SA16-3003R-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-S1 AP5020

ISO: SA16-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-M1 AP5020

ISO: SA16-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-T1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-T1 AP2220

ISO: SA16-3003N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA16-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA16-3003N-M1 AP2220

ISO: SA16-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ISCAR GIQR 11-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ISCAR GIQR 11-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ANSI: GIQR 11-1.40-0.05 IC528

ISO: GIQR 11-1.40-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-5.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.197 Wide TiCN + TiN

ISCAR GIQR 11-5.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.197 Wide TiCN + TiN

ANSI: GIQR 11-5.00-0.20 IC528

ISO: GIQR 11-5.00-0.20 IC528

$25.83
Picture of ISCAR GIQR 11-2.39-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide TiCN + TiN

ISCAR GIQR 11-2.39-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide TiCN + TiN

ANSI: GIQR 11-2.39-0.15 IC528

ISO: GIQR 11-2.39-0.15 IC528

$25.83
Picture of ISCAR GIQR 11-2.47-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiCN + TiN

ISCAR GIQR 11-2.47-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide TiCN + TiN

ANSI: GIQR 11-2.47-0.20 IC528

ISO: GIQR 11-2.47-0.20 IC528

$25.83
Picture of ISCAR GIQR 11-3.18-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiCN + TiN

ISCAR GIQR 11-3.18-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide TiCN + TiN

ANSI: GIQR 11-3.18-0.20 IC528

ISO: GIQR 11-3.18-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQL 11-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQL 11-1.50-0.05 IC528

ISO: GIQL 11-1.50-0.05 IC528

$25.83
Picture of ISCAR GIQL 11-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ISCAR GIQL 11-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ANSI: GIQL 11-1.04-0.05 IC528

ISO: GIQL 11-1.04-0.05 IC528

$25.83
Picture of ISCAR GIQL 11-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQL 11-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQL 11-2.00-0.10 IC528

ISO: GIQL 11-2.00-0.10 IC528

$25.83
Picture of ISCAR GIQL 11-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ISCAR GIQL 11-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ANSI: GIQL 11-1.40-0.05 IC528

ISO: GIQL 11-1.40-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQR 11-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQR 11-1.20-0.05 IC528

ISO: GIQR 11-1.20-0.05 IC528

$25.83
Picture of ISCAR GIQL 11-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ISCAR GIQL 11-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ANSI: GIQL 11-2.22-0.10 IC528

ISO: GIQL 11-2.22-0.10 IC528

$25.83
Picture of ISCAR GIQR 11-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQR 11-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQR 11-2.00-0.10 IC528

ISO: GIQR 11-2.00-0.10 IC528

$25.83
Picture of ISCAR GIQR 11-4.00-R200 IC528 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + TiN

ISCAR GIQR 11-4.00-R200 IC528 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + TiN

ANSI: GIQR 11-4.00-R200 IC528

ISO: GIQR 11-4.00-R200 IC528

$25.83
Picture of ISCAR GIQR 11-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ISCAR GIQR 11-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ANSI: GIQR 11-0.75-0.00 IC528

ISO: GIQR 11-0.75-0.00 IC528

$25.83
Picture of ISCAR GIQR 11-4.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + TiN

ISCAR GIQR 11-4.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + TiN

ANSI: GIQR 11-4.00-0.20 IC528

ISO: GIQR 11-4.00-0.20 IC528

$25.83
Picture of ISCAR GIQR 11-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQR 11-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQR 11-2.50-0.20 IC528

ISO: GIQR 11-2.50-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-1.70-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide TiCN + TiN

ISCAR GIQL 11-1.70-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide TiCN + TiN

ANSI: GIQL 11-1.70-0.05 IC528

ISO: GIQL 11-1.70-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-1.70-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide TiCN + TiN

ISCAR GIQR 11-1.70-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide TiCN + TiN

ANSI: GIQR 11-1.70-0.05 IC528

ISO: GIQR 11-1.70-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ISCAR GIQR 11-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ANSI: GIQR 11-0.95-0.00 IC528

ISO: GIQR 11-0.95-0.00 IC528

$25.83
Picture of ISCAR GIQR 11-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQR 11-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQR 11-1.50-0.05 IC528

ISO: GIQR 11-1.50-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ISCAR GIQR 11-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ANSI: GIQR 11-0.50-0.00 IC528

ISO: GIQR 11-0.50-0.00 IC528

$25.83
Picture of ISCAR GIQR 11-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ISCAR GIQR 11-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ANSI: GIQR 11-0.85-0.00 IC528

ISO: GIQR 11-0.85-0.00 IC528

$25.83
Picture of ISCAR GIQL 11-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQL 11-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQL 11-2.50-0.20 IC528

ISO: GIQL 11-2.50-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ISCAR GIQL 11-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ANSI: GIQL 11-0.95-0.00 IC528

ISO: GIQL 11-0.95-0.00 IC528

$25.83
Picture of ISCAR GIQL 11-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ISCAR GIQL 11-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ANSI: GIQL 11-0.75-0.00 IC528

ISO: GIQL 11-0.75-0.00 IC528

$25.83
Picture of ISCAR GIQR 11-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ISCAR GIQR 11-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ANSI: GIQR 11-2.22-0.10 IC528

ISO: GIQR 11-2.22-0.10 IC528

$25.83
Picture of ISCAR GIQR 11-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 11-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 11-3.00-0.20 IC528

ISO: GIQR 11-3.00-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQL 11-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQL 11-1.20-0.05 IC528

ISO: GIQL 11-1.20-0.05 IC528

$25.83
Picture of ISCAR GIQR 11-2.70-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiCN + TiN

ISCAR GIQR 11-2.70-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiCN + TiN

ANSI: GIQR 11-2.70-0.20 IC528

ISO: GIQR 11-2.70-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ISCAR GIQL 11-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ANSI: GIQL 11-1.96-0.10 IC528

ISO: GIQL 11-1.96-0.10 IC528

$25.83
Picture of ISCAR GIQR 11-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ISCAR GIQR 11-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ANSI: GIQR 11-1.04-0.05 IC528

ISO: GIQR 11-1.04-0.05 IC528

$25.83
Picture of ISCAR GIQL 11-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 11-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 11-3.00-0.20 IC528

ISO: GIQL 11-3.00-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-2.70-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiCN + TiN

ISCAR GIQL 11-2.70-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide TiCN + TiN

ANSI: GIQL 11-2.70-0.20 IC528

ISO: GIQL 11-2.70-0.20 IC528

$25.83
Picture of ISCAR GIQL 11-2.39-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide TiCN + TiN

ISCAR GIQL 11-2.39-0.15 IC528 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide TiCN + TiN

ANSI: GIQL 11-2.39-0.15 IC528

ISO: GIQL 11-2.39-0.15 IC528

$25.83
Picture of ISCAR GIQR 11-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ISCAR GIQR 11-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ANSI: GIQR 11-1.96-0.10 IC528

ISO: GIQR 11-1.96-0.10 IC528

$25.83
Picture of ISCAR GIQL 11-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ISCAR GIQL 11-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ANSI: GIQL 11-0.50-0.00 IC528

ISO: GIQL 11-0.50-0.00 IC528

$25.83
Picture of ARNO ROUSE SA24-2503N-M1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-M1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-M1 AP5020

ISO: SA24-2503N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP5030

ISO: SA24-2503N-T1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-S1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-S1 AP5020

ISO: SA24-2503N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-2503N-S1 AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-2503N-S1 AM5040

ISO: SA24-2503N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-S1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-S1 AP5030 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-S1 AP5030

ISO: SA24-2503N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2503N-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24-2503N-T1 AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.012 Corner Radius TiCN

ANSI: SA24-2503N-T1 AP5020

ISO: SA24-2503N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 635-080 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN

ISCAR TGMF 635-080 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN

ANSI: TGMF 635-080 IC908

ISO: TGMF 635-080 IC908

$25.75
Picture of ISCAR TGMF 635-080 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide AlTiN + TiN

ISCAR TGMF 635-080 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide AlTiN + TiN

ANSI: TGMF 635-080 IC830

ISO: TGMF 635-080 IC830

$25.75
Picture of ISCAR GIMY 1260 IC20 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide

ISCAR GIMY 1260 IC20 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide

ANSI: GIMY 1260 IC20

ISO: GIMY 1260 IC20

$25.75
Picture of ISCAR TGMF 635-080 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 635-080 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 635-080 IC808

ISO: TGMF 635-080 IC808

$25.75
Picture of ISCAR TAGB 1050Y IC808 Grooving,Groove Turning Insert 0.197 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ISCAR TAGB 1050Y IC808 Grooving,Groove Turning Insert 0.197 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ANSI: TAGB 1050Y IC808

ISO: TAGB 1050Y IC808

$25.72
Picture of TUNGALOY WGR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY WGR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: WGR40 T9225

ISO: WGR40 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT50 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY WGT50 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: WGT50 T9225

ISO: WGT50 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT40 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY WGT40 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: WGT40 T9225

ISO: WGT40 T9225

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDXU5E-0.4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius

INGERSOLL TDXU5E-0.4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius

ANSI: TDXU5E-0.4 CT3000

ISO: TDXU5E-0.4 CT3000

$25.53
Picture of INGERSOLL TDXU5E-0.8 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius

INGERSOLL TDXU5E-0.8 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.031 Corner Radius

ANSI: TDXU5E-0.8 CT3000

ISO: TDXU5E-0.8 CT3000

$25.53
Picture of ISCAR GIQR 8-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ISCAR GIQR 8-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ANSI: GIQR 8-1.96-0.10 IC528

ISO: GIQR 8-1.96-0.10 IC528

$25.52
Picture of ISCAR GIQR 8-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ISCAR GIQR 8-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ANSI: GIQR 8-0.95-0.00 IC528

ISO: GIQR 8-0.95-0.00 IC528

$25.52
Picture of ISCAR GIQR 8-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQR 8-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQR 8-1.20-0.05 IC528

ISO: GIQR 8-1.20-0.05 IC528

$25.52
Picture of ISCAR GIQL 8-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQL 8-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQL 8-2.50-0.20 IC528

ISO: GIQL 8-2.50-0.20 IC528

$25.52
Picture of ISCAR GIQL 8-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ISCAR GIQL 8-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ANSI: GIQL 8-2.22-0.10 IC528

ISO: GIQL 8-2.22-0.10 IC528

$25.52
Picture of ISCAR GIQR 8-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ISCAR GIQR 8-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ANSI: GIQR 8-1.40-0.05 IC528

ISO: GIQR 8-1.40-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-1.00-0.00 IC528 Grooving,Groove Turning Insert 0.039 Wide TiCN + TiN

ISCAR GIQR 8-1.00-0.00 IC528 Grooving,Groove Turning Insert 0.039 Wide TiCN + TiN

ANSI: GIQR 8-1.00-0.00 IC528

ISO: GIQR 8-1.00-0.00 IC528

$25.52
Picture of ISCAR GIQL 8-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ISCAR GIQL 8-0.95-0.00 IC528 Grooving,Groove Turning Insert 0.037 Wide TiCN + TiN

ANSI: GIQL 8-0.95-0.00 IC528

ISO: GIQL 8-0.95-0.00 IC528

$25.52
Picture of ISCAR GIF 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIF 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIF 4.00E-0.40 IC20

ISO: GIF 4.00E-0.40 IC20

$25.52
Picture of ISCAR GIQL 8-1.00-0.00 IC528 Grooving,Groove Turning Insert 0.039 Wide TiCN + TiN

ISCAR GIQL 8-1.00-0.00 IC528 Grooving,Groove Turning Insert 0.039 Wide TiCN + TiN

ANSI: GIQL 8-1.00-0.00 IC528

ISO: GIQL 8-1.00-0.00 IC528

$25.52
Picture of ISCAR GIQR 8-1.47-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.058 Wide TiCN + TiN

ISCAR GIQR 8-1.47-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.058 Wide TiCN + TiN

ANSI: GIQR 8-1.47-0.05 IC528

ISO: GIQR 8-1.47-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ISCAR GIQR 8-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ANSI: GIQR 8-1.04-0.05 IC528

ISO: GIQR 8-1.04-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ISCAR GIQR 8-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ANSI: GIQR 8-0.50-0.00 IC528

ISO: GIQR 8-0.50-0.00 IC528

$25.52
Picture of ISCAR GIF 4.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ISCAR GIF 4.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ANSI: GIF 4.00E-0.60 IC20

ISO: GIF 4.00E-0.60 IC20

$25.52
Picture of ISCAR GIQL 8-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ISCAR GIQL 8-0.50-0.00 IC528 Grooving,Groove Turning Insert 0.020 Wide TiCN + TiN

ANSI: GIQL 8-0.50-0.00 IC528

ISO: GIQL 8-0.50-0.00 IC528

$25.52
Picture of ISCAR GIP 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIP 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIP 4.00E-0.40 IC20

ISO: GIP 4.00E-0.40 IC20

$25.52
Picture of ISCAR GIQL 8-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ISCAR GIQL 8-1.20-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.047 Wide TiCN + TiN

ANSI: GIQL 8-1.20-0.05 IC528

ISO: GIQL 8-1.20-0.05 IC528

$25.52
Picture of ISCAR GIQL 8-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQL 8-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQL 8-3.00-0.20 IC528

ISO: GIQL 8-3.00-0.20 IC528

$25.52
Picture of ISCAR GIQR 8-1.70-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.067 Wide TiCN + TiN

ISCAR GIQR 8-1.70-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.067 Wide TiCN + TiN

ANSI: GIQR 8-1.70-0.10 IC528

ISO: GIQR 8-1.70-0.10 IC528

$25.52
Picture of ISCAR GIQR 8-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ISCAR GIQR 8-2.22-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide TiCN + TiN

ANSI: GIQR 8-2.22-0.10 IC528

ISO: GIQR 8-2.22-0.10 IC528

$25.52
Picture of ISCAR GIQR 8-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ISCAR GIQR 8-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ANSI: GIQR 8-0.85-0.00 IC528

ISO: GIQR 8-0.85-0.00 IC528

$25.52
Picture of ISCAR GIQL 8-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQL 8-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQL 8-1.50-0.05 IC528

ISO: GIQL 8-1.50-0.05 IC528

$25.52
Picture of ISCAR GIF 4.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

ISCAR GIF 4.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

ANSI: GIF 4.00E-0.80 IC20

ISO: GIF 4.00E-0.80 IC20

$25.52
Picture of ISCAR GIP 4.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

ISCAR GIP 4.00E-0.80 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.157 Wide

ANSI: GIP 4.00E-0.80 IC20

ISO: GIP 4.00E-0.80 IC20

$25.52
Picture of ISCAR GIFI 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIFI 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIFI 4.00E-0.40 IC20

ISO: GIFI 4.00E-0.40 IC20

$25.52
Picture of ISCAR GIQL 8-1.47-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.058 Wide TiCN + TiN

ISCAR GIQL 8-1.47-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.058 Wide TiCN + TiN

ANSI: GIQL 8-1.47-0.05 IC528

ISO: GIQL 8-1.47-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ISCAR GIQR 8-1.50-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiCN + TiN

ANSI: GIQR 8-1.50-0.05 IC528

ISO: GIQR 8-1.50-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-3.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.138 Wide TiCN + TiN

ISCAR GIQR 8-3.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.138 Wide TiCN + TiN

ANSI: GIQR 8-3.50-0.20 IC528

ISO: GIQR 8-3.50-0.20 IC528

$25.52
Picture of ISCAR GIQR 8-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ISCAR GIQR 8-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ANSI: GIQR 8-0.75-0.00 IC528

ISO: GIQR 8-0.75-0.00 IC528

$25.52
Picture of ISCAR GIQL 8-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ISCAR GIQL 8-0.75-0.00 IC528 Grooving,Groove Turning Insert 0.030 Wide TiCN + TiN

ANSI: GIQL 8-0.75-0.00 IC528

ISO: GIQL 8-0.75-0.00 IC528

$25.52
Picture of ISCAR GIQL 8-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ISCAR GIQL 8-1.40-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.055 Wide TiCN + TiN

ANSI: GIQL 8-1.40-0.05 IC528

ISO: GIQL 8-1.40-0.05 IC528

$25.52
Picture of ISCAR GIQR 8-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ISCAR GIQR 8-2.50-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide TiCN + TiN

ANSI: GIQR 8-2.50-0.20 IC528

ISO: GIQR 8-2.50-0.20 IC528

$25.52
Picture of ISCAR GIQR 8-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQR 8-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQR 8-2.00-0.10 IC528

ISO: GIQR 8-2.00-0.10 IC528

$25.52
Picture of ISCAR GIQL 8-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ISCAR GIQL 8-0.85-0.00 IC528 Grooving,Groove Turning Insert 0.033 Wide TiCN + TiN

ANSI: GIQL 8-0.85-0.00 IC528

ISO: GIQL 8-0.85-0.00 IC528

$25.52
Picture of ISCAR GIQL 8-1.70-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.067 Wide TiCN + TiN

ISCAR GIQL 8-1.70-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.067 Wide TiCN + TiN

ANSI: GIQL 8-1.70-0.10 IC528

ISO: GIQL 8-1.70-0.10 IC528

$25.52
Picture of ISCAR GIQR 8-4.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + TiN

ISCAR GIQR 8-4.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + TiN

ANSI: GIQR 8-4.00-0.20 IC528

ISO: GIQR 8-4.00-0.20 IC528

$25.52
Picture of ISCAR GIP 4.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ISCAR GIP 4.00E-0.60 IC20 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ANSI: GIP 4.00E-0.60 IC20

ISO: GIP 4.00E-0.60 IC20

$25.52
Picture of ISCAR GIPI 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIPI 4.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIPI 4.00E-0.40 IC20

ISO: GIPI 4.00E-0.40 IC20

$25.52
Picture of ISCAR GIQR 8-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ISCAR GIQR 8-3.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + TiN

ANSI: GIQR 8-3.00-0.20 IC528

ISO: GIQR 8-3.00-0.20 IC528

$25.52
Picture of ISCAR GIF 3.48-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide

ISCAR GIF 3.48-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.137 Wide

ANSI: GIF 3.48-0.20 IC20

ISO: GIF 3.48-0.20 IC20

$25.52
Picture of ISCAR GIQL 8-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ISCAR GIQL 8-1.04-0.05 IC528 Grooving,Groove Turning Insert 0.002 Corner Radius 0.041 Wide TiCN + TiN

ANSI: GIQL 8-1.04-0.05 IC528

ISO: GIQL 8-1.04-0.05 IC528

$25.52
Picture of ISCAR GIPI 4.23-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide

ISCAR GIPI 4.23-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.167 Wide

ANSI: GIPI 4.23-0.10 IC20

ISO: GIPI 4.23-0.10 IC20

$25.52
Picture of ISCAR GIQL 8-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ISCAR GIQL 8-1.96-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide TiCN + TiN

ANSI: GIQL 8-1.96-0.10 IC528

ISO: GIQL 8-1.96-0.10 IC528

$25.52
Picture of ISCAR GIF 3.98-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR GIF 3.98-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: GIF 3.98-0.20 IC20

ISO: GIF 3.98-0.20 IC20

$25.52
Picture of ISCAR GIPI 3.96-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.156 Wide

ISCAR GIPI 3.96-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.156 Wide

ANSI: GIPI 3.96-0.20 IC20

ISO: GIPI 3.96-0.20 IC20

$25.52
Picture of ISCAR GIQL 8-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GIQL 8-2.00-0.10 IC528 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GIQL 8-2.00-0.10 IC528

ISO: GIQL 8-2.00-0.10 IC528

$25.52
Picture of ARNO ROUSE SA24-3002N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002N-S1 AP5020

ISO: SA24-3002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT6E-3.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT6E-3.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT6E-3.0-RU TT5100

ISO: TDT6E-3.0-RU TT5100

$25.41
Picture of INGERSOLL TDT6E-3.0-RU TT6080 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius AlTiN + TiN

INGERSOLL TDT6E-3.0-RU TT6080 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius AlTiN + TiN

ANSI: TDT6E-3.0-RU TT6080

ISO: TDT6E-3.0-RU TT6080

$25.41