Agricultural

Sort by
Picture of ISCAR EFSI-B44 375-750C375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer FINI-SHRED

ISCAR EFSI-B44 375-750C375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer FINI-SHRED

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0661-2M IC908 .661" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0661-2M IC908 .661" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0661-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0705-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0677-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0669-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0689-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0642-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0665-2M IC908 .665" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0665-2M IC908 .665" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0665-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0673-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICN 0748 IC08 .748" Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials)

ISCAR ICN 0748 IC08 .748" Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials)

ISO: ICN 0748 IC08

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0646-2M IC908 .646" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0646-2M IC908 .646" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0646-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR EFSI-B44 375-750W375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer FINI-SHRED

ISCAR EFSI-B44 375-750W375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer FINI-SHRED

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0681-2M IC908 .681" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0681-2M IC908 .681" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0681-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0693-2M IC908 .693" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0693-2M IC908 .693" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0693-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0701-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0657-2M IC907 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0657-2M IC907 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0657-2M IC907

Call (262) 251-4020 for pricing
Picture of EMUGE 3442L.08030A DIA 3MM SH 0.4724 LOC 0.2756 OAL 2.4803 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

EMUGE 3442L.08030A DIA 3MM SH 0.4724 LOC 0.2756 OAL 2.4803 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR12F44.125 DIA 1/2" SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GMNR12F44.125 DIA 1/2" SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GMNR12F44.125

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR12F54.125 DIA 1/2" SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GMNR12F54.125 DIA 1/2" SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GMNR12F54.125

Call (262) 251-4020 for pricing
Picture of MICRO 100 MTR-750 Thread Mill

MICRO 100 MTR-750 Thread Mill

Call (262) 251-4020 for pricing
Picture of EMUGE 3442.08015A DIA 1.50MM SH 0.3937 LOC 0.1575 OAL 3.149 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3442.08015A DIA 1.50MM SH 0.3937 LOC 0.1575 OAL 3.149 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-A-H004-ER20-T08 SH 0.7874 OAL 1.3980 Replacable Head Acc. ER 20 Steel Single End MULTI-MASTER

ISCAR MM S-A-H004-ER20-T08 SH 0.7874 OAL 1.3980 Replacable Head Acc. ER 20 Steel Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR MM TS-A-L4.00-C.625-T10 SH 0.6250 OAL 4.00 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

ISCAR MM TS-A-L4.00-C.625-T10 SH 0.6250 OAL 4.00 Replacable Head Acc. Stepped Shank Steel Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-A-L4.00-C.625-T10 SH 0.6250 OAL 4.00 Replacable Head Acc. 89° Conical Steel Single End MULTI-MASTER

ISCAR MM S-A-L4.00-C.625-T10 SH 0.6250 OAL 4.00 Replacable Head Acc. 89° Conical Steel Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT225029 M14-1.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiN

WIDIA/KENNAMETAL GT225029 M14-1.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiN

Call (262) 251-4020 for pricing
Picture of YG-1 0281ATF 7/16 Carbide Dream Drill W/O Coolant Holes (3XD)

YG-1 0281ATF 7/16 Carbide Dream Drill W/O Coolant Holes (3XD)

Call (262) 251-4020 for pricing
Picture of IMCO 68326 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

IMCO 68326 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 63692 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0197 0.50MM Pow-R-Path Mill

IMCO 63692 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0197 0.50MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 571812015MT DIA 12MM SH 0.4724 LOC 1.8898 OAL 4.9213 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0197 0.50MM VariMill II

HANITA/WIDIA 571812015MT DIA 12MM SH 0.4724 LOC 1.8898 OAL 4.9213 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0197 0.50MM VariMill II

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 571810034MT DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0787 2.00MM VariMill II

HANITA/WIDIA 571810034MT DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0787 2.00MM VariMill II

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 571810044MT DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0984 2.50MM VariMill II

HANITA/WIDIA 571810044MT DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0984 2.50MM VariMill II

Call (262) 251-4020 for pricing
Picture of ISCAR ECRI-B4M 375-750-C375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer Solid-SHRED

ISCAR ECRI-B4M 375-750-C375 IC900 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.00 End Mill Carbide AlTiN Single End 45.0° Chamfer Solid-SHRED

Call (262) 251-4020 for pricing
Picture of ISCAR MM EA.625B39R000-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2630Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius Sharp MULTI-MASTER

ISCAR MM EA.625B39R000-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2630Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius Sharp MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of AWARD B8-403-CO DIA 1/4 SH 0.50 LOC 0.7500 OAL 2.8750 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD B8-403-CO DIA 1/4 SH 0.50 LOC 0.7500 OAL 2.8750 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ISCAR EBLI-A-4 375-875-C375 IC900 DIA 3/8 SH 0.3750 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose SolidMill

ISCAR EBLI-A-4 375-875-C375 IC900 DIA 3/8 SH 0.3750 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose SolidMill

Call (262) 251-4020 for pricing
Picture of ISCAR MM TS1.00-H375D-06T10* IC328 DIA 1 SH T10 OAL 12.2800T-Slot,Replacable Head Carbide TiCN Single End 0.0150 0.38MM MULTI-MASTER

ISCAR MM TS1.00-H375D-06T10* IC328 DIA 1 SH T10 OAL 12.2800T-Slot,Replacable Head Carbide TiCN Single End 0.0150 0.38MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR MM EA.625B39R062-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2730Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0620 1.57MM MULTI-MASTER

ISCAR MM EA.625B39R062-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2730Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0620 1.57MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR MM EA.625B39R031-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2730Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0310 0.79MM MULTI-MASTER

ISCAR MM EA.625B39R031-3T10 IC08 DIA 5/8 SH T10 LOC 0.3906 OAL 1.2730Screw On Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0310 0.79MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of AWARD BN-403 DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BN-403 DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of IMCO 64015 DIA 12MM SH 0.4724 LOC 0.9449 OAL 2.9528 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

IMCO 64015 DIA 12MM SH 0.4724 LOC 0.9449 OAL 2.9528 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of YG-1 81595TN DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Carbide TiN Single End Square Sharp Carbide End Mill

YG-1 81595TN DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Carbide TiN Single End Square Sharp Carbide End Mill

Call (262) 251-4020 for pricing
Picture of AWARD 45-203-CBTIALN DIA 1/8 SH 0.6250 LOC 0.7500 OAL 3.2500 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD 45-203-CBTIALN DIA 1/8 SH 0.6250 LOC 0.7500 OAL 3.2500 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of TUNGALOY VBB0625L47-BM-U02S10 AH725 DIA 5/8 SH T10 LOC 0.6300 OAL 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY VBB0625L47-BM-U02S10 AH725 DIA 5/8 SH T10 LOC 0.6300 OAL 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of INGERSOLL 45N15722T8RA45 IN2005 DIA 15.70MM SH T08 LOC 0.6181 Chamfer Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer CHIPSURFER

INGERSOLL 45N15722T8RA45 IN2005 DIA 15.70MM SH T08 LOC 0.6181 Chamfer Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer CHIPSURFER

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-A-H013-ER20-T08 SH 0.7874 OAL 1.7520 Replacable Head Acc. ER 20 Steel Single End MULTI-MASTER

ISCAR MM S-A-H013-ER20-T08 SH 0.7874 OAL 1.7520 Replacable Head Acc. ER 20 Steel Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of YG-1 BG702GB 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSS-EX Gold-Black

YG-1 BG702GB 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSS-EX Gold-Black

Call (262) 251-4020 for pricing
Picture of YG-1 BG702H 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSS-EX Hardslick

YG-1 BG702H 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSS-EX Hardslick

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1401376 M10-1.50MM Cut Spiral Point Plug 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401376 M10-1.50MM Cut Spiral Point Plug 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of IMCO 68027 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0197 0.50MM Pow-R-Feed Mill

IMCO 68027 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0197 0.50MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 68028 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Feed Mill

IMCO 68028 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 68325 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

IMCO 68325 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 68324 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM Pow-R-Feed Mill

IMCO 68324 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMACB58FHL3ZrN DIA 5/8" SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Carbide ZrN Single End Square Sharp SILVERBack CHIMPBREAKER

GORILLA MILL GMACB58FHL3ZrN DIA 5/8" SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Carbide ZrN Single End Square Sharp SILVERBack CHIMPBREAKER

ISO: GMACB58FHL3ZrN

Call (262) 251-4020 for pricing
Picture of Thread MILL USA HDTM31218 Carbide 5/16" x 18.00TPI UN 0.245 Cut Dia Cylindrical 0.3125 3.000 OAL TIALN

Thread MILL USA HDTM31218 Carbide 5/16" x 18.00TPI UN 0.245 Cut Dia Cylindrical 0.3125 3.000 OAL TIALN

ISO: HDTM31218

Call (262) 251-4020 for pricing
Picture of AWARD BR-0254TIN DIA 0.07 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BR-0254TIN DIA 0.07 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD N-210-CO DIA 1/8 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD N-210-CO DIA 1/8 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of TUNGALOY VBB160L16.0-BM-02S10 AH725 DIA 16MM SH T10 LOC 0.6299 OAL 0.7520End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY VBB160L16.0-BM-02S10 AH725 DIA 16MM SH T10 LOC 0.6299 OAL 0.7520End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V1516006NW DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

HANITA/WIDIA 4V1516006NW DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

Call (262) 251-4020 for pricing
Picture of IMCO 63181 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

IMCO 63181 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 63516 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

IMCO 63516 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of VIKING 16442 1-1/4 Annular Drill 2 Length Of Cut Gold Coated

VIKING 16442 1-1/4 Annular Drill 2 Length Of Cut Gold Coated

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0673-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0650-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0685-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR MM ETR.500A27R156-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1560 3.96MM MULTI-MASTER

ISCAR MM ETR.500A27R156-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1560 3.96MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0634-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0669-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1000-SK IC908 1.000" DCM Drill Heads for Cast Iron

ISCAR IDI 1000-SK IC908 1.000" DCM Drill Heads for Cast Iron

ISO: IDI 1000-SK IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0642-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0701-2M IC908

Call (262) 251-4020 for pricing
Picture of AWARD L-805-COTIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD L-805-COTIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0697-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1016-SG IC908 1.016" General Use DCM Drill Heads

ISCAR IDI 1016-SG IC908 1.016" General Use DCM Drill Heads

ISO: IDI 1016-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1020-SG IC908 1.020" General Use DCM Drill Heads

ISCAR IDI 1020-SG IC908 1.020" General Use DCM Drill Heads

ISO: IDI 1020-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR MM ETR.500A27R125-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM MULTI-MASTER

ISCAR MM ETR.500A27R125-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0654-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1007-SG IC908 1.007" General Use DCM Drill Heads

ISCAR IDI 1007-SG IC908 1.007" General Use DCM Drill Heads

ISO: IDI 1007-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0709-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0657-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0992-SG IC908 .992" General Use DCM Drill Heads

ISCAR IDI 0992-SG IC908 .992" General Use DCM Drill Heads

ISO: IDI 0992-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0697-2M IC908 .697" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0697-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1004-SK IC908 1.004" DCM Drill Heads for Cast Iron

ISCAR IDI 1004-SK IC908 1.004" DCM Drill Heads for Cast Iron

ISO: IDI 1004-SK IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0657-2M IC908 .657" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0657-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0984-SG IC908 .984" General Use DCM Drill Heads

ISCAR IDI 0984-SG IC908 .984" General Use DCM Drill Heads

ISO: IDI 0984-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0650-2M IC908 .650" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0650-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0984-SK IC908 .984" DCM Drill Heads for Cast Iron

ISCAR IDI 0984-SK IC908 .984" DCM Drill Heads for Cast Iron

ISO: IDI 0984-SK IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0634-2M IC908 .634" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0634-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR MM ETR.500A27R062-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM MULTI-MASTER

ISCAR MM ETR.500A27R062-6T08 90 IC908 DIA 1/2 SH T08 LOC 0.2700 OAL 0.9630End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0988-SK IC908 .988" DCM Drill Heads for Cast Iron

ISCAR IDI 0988-SK IC908 .988" DCM Drill Heads for Cast Iron

ISO: IDI 0988-SK IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0638-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1012-SG IC908 1.012" General Use DCM Drill Heads

ISCAR IDI 1012-SG IC908 1.012" General Use DCM Drill Heads

ISO: IDI 1012-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0677-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1004-SG IC908 1.004" General Use DCM Drill Heads

ISCAR IDI 1004-SG IC908 1.004" General Use DCM Drill Heads

ISO: IDI 1004-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0642-2M IC908 .642" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0642-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0709-2M IC908 .709" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0709-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0689-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0701-2M IC908 .701" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0701-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0638-2M IC908 .638" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0638-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1000-SG IC908 1.000" General Use DCM Drill Heads

ISCAR IDI 1000-SG IC908 1.000" General Use DCM Drill Heads

ISO: IDI 1000-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0654-2M IC908 .654" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0654-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0988-SG IC908 .988" General Use DCM Drill Heads

ISCAR IDI 0988-SG IC908 .988" General Use DCM Drill Heads

ISO: IDI 0988-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0705-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0677-2M IC908 .677" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0677-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0705-2M IC908 .705" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0705-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0996-SG IC908 .996" General Use DCM Drill Heads

ISCAR IDI 0996-SG IC908 .996" General Use DCM Drill Heads

ISO: IDI 0996-SG IC908

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 1020-SK IC908 1.020" DCM Drill Heads for Cast Iron

ISCAR IDI 1020-SK IC908 1.020" DCM Drill Heads for Cast Iron

ISO: IDI 1020-SK IC908

Call (262) 251-4020 for pricing
Picture of ISCAR QCP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0689-2M IC908 .689" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0689-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0673-2M IC908 .673" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0673-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0685-2M IC908 .685" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0685-2M IC908

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0669-2M IC908 .669" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0669-2M IC908

Call (262) 251-4020 for pricing
Picture of AWARD L-809-COTIN DIA 1/2 SH 0.6250 LOC 2.2500 OAL 4.3750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD L-809-COTIN DIA 1/2 SH 0.6250 LOC 2.2500 OAL 4.3750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD V-413 DIA 1/4 SH 1.2500 LOC 3.2500 OAL 5.7500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD V-413 DIA 1/4 SH 1.2500 LOC 3.2500 OAL 5.7500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC100H7-30C10CF-M85 AH710 DIA 10MM SH 0.3937 LOC 1.1811 OAL 3.3465 End Mill Standard Flute Variable Helix Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TEC100H7-30C10CF-M85 AH710 DIA 10MM SH 0.3937 LOC 1.1811 OAL 3.3465 End Mill Standard Flute Variable Helix Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 63426CE DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 63426CE DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSS075L275W10US DIA 0.598 SH 0.7500 LOC 0.1570 OAL 2.7500 Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

TUNGALOY VSS075L275W10US DIA 0.598 SH 0.7500 LOC 0.1570 OAL 2.7500 Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA120B3-30C12R30-83 KS15F DIA 12MM SH 0.4724 LOC 1.1811 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM TUNG MEISTER

TUNGALOY TECA120B3-30C12R30-83 KS15F DIA 12MM SH 0.4724 LOC 1.1811 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA120B3-30C12R40-83 KS15F DIA 12MM SH 0.4724 LOC 1.1811 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM TUNG MEISTER

TUNGALOY TECA120B3-30C12R40-83 KS15F DIA 12MM SH 0.4724 LOC 1.1811 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 66905PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

YG-1 66905PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 66903PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

YG-1 66903PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 66904PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

YG-1 66904PC DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

Call (262) 251-4020 for pricing
Picture of INGERSOLL 45B-6247TRRB08-P IN05S DIA 5/8 SH T10 LOC 0.4700End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose CHIPSURFER

INGERSOLL 45B-6247TRRB08-P IN05S DIA 5/8 SH T10 LOC 0.4700End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL 46D-6239TRRD12-P IN05S DIA 5/8 SH T10 LOC 0.6250End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM CHIPSURFER

INGERSOLL 46D-6239TRRD12-P IN05S DIA 5/8 SH T10 LOC 0.6250End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM CHIPSURFER

Call (262) 251-4020 for pricing
Picture of AWARD O-256-CB DIA 5/32 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD O-256-CB DIA 5/32 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of INGERSOLL 45B16012TRRB21 IN05S DIA 16MM SH T10 LOC 0.6299End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose CHIPSURFER

INGERSOLL 45B16012TRRB21 IN05S DIA 16MM SH T10 LOC 0.6299End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose CHIPSURFER

Call (262) 251-4020 for pricing
Picture of AWARD O-320TIN DIA 3/16 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD O-320TIN DIA 3/16 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 E9991905TF DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

YG-1 E9991905TF DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

Call (262) 251-4020 for pricing
Picture of YG-1 G93032 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.2500 End Mill Carbide TiAlN Single End Corner Radius 0.0200 0.51MM X-SPEED End Mill

YG-1 G93032 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.2500 End Mill Carbide TiAlN Single End Corner Radius 0.0200 0.51MM X-SPEED End Mill

Call (262) 251-4020 for pricing
Picture of YG-1 G90932 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.2500 End Mill Carbide TiAlN Single End Corner Radius 0.0200 0.51MM X-SPEED End Mill

YG-1 G90932 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.2500 End Mill Carbide TiAlN Single End Corner Radius 0.0200 0.51MM X-SPEED End Mill

Call (262) 251-4020 for pricing
Picture of AWARD T-809TIN DIA 1/2 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD T-809TIN DIA 1/2 SH 1.00 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD O-205-CO DIA 1/8 SH 0.3750 LOC 1.2500 OAL 3.1250 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD O-205-CO DIA 1/8 SH 0.3750 LOC 1.2500 OAL 3.1250 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 66901 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 66901 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

Call (262) 251-4020 for pricing
Picture of EMUGE C011R501.0112 Tap M12-1.75MM Bottoming Metric DIN/DIN 1.5P-2.0P Carbide HSSE-Powder Metal TiCN

EMUGE C011R501.0112 Tap M12-1.75MM Bottoming Metric DIN/DIN 1.5P-2.0P Carbide HSSE-Powder Metal TiCN

ISO: C011R501.0112

Call (262) 251-4020 for pricing
Picture of YG-1 BB766 7/8-14.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

YG-1 BB766 7/8-14.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

Call (262) 251-4020 for pricing
Picture of YG-1 BB746 7/8-9.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

YG-1 BB746 7/8-9.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT435007 M12-1.50MM Cut Spiral Flute Bottoming 1.0P-2.0P HSSE-Powder Metal TiCN

WIDIA/KENNAMETAL GT435007 M12-1.50MM Cut Spiral Flute Bottoming 1.0P-2.0P HSSE-Powder Metal TiCN

Call (262) 251-4020 for pricing
Picture of AWARD W-0001-CBTIALN DIA 1/32 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD W-0001-CBTIALN DIA 1/32 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSSD20L070W10-S DIA 15.20MM SH 0.7874 LOC 0.1575 OAL 2.75Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

TUNGALOY VSSD20L070W10-S DIA 15.20MM SH 0.7874 LOC 0.1575 OAL 2.75Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTM916-12UN4FL Carbide Thread Mill Helical 9/16" 12.00TPI UN TIALN 0.9170 23.29MM LOC 3.5000 88.90MM OAL

GORILLA MILL GMTM916-12UN4FL Carbide Thread Mill Helical 9/16" 12.00TPI UN TIALN 0.9170 23.29MM LOC 3.5000 88.90MM OAL

ISO: GMTM916-12UN4FL

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTM916-18UN4FL Carbide Thread Mill Helical 9/16" 18.00TPI UN TIALN 0.8890 22.58MM LOC 3.5000 88.90MM OAL

GORILLA MILL GMTM916-18UN4FL Carbide Thread Mill Helical 9/16" 18.00TPI UN TIALN 0.8890 22.58MM LOC 3.5000 88.90MM OAL

ISO: GMTM916-18UN4FL

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTM716-20UN4FL Carbide Thread Mill Helical 7/16" 20.00TPI UN TIALN 0.9000 22.86MM LOC 3.5000 88.90MM OAL

GORILLA MILL GMTM716-20UN4FL Carbide Thread Mill Helical 7/16" 20.00TPI UN TIALN 0.9000 22.86MM LOC 3.5000 88.90MM OAL

ISO: GMTM716-20UN4FL

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTM12-13UN4FL Carbide Thread Mill Helical 1/2" 13.00TPI UN TIALN 0.9230 23.44MM LOC 3.5000 88.90MM OAL

GORILLA MILL GMTM12-13UN4FL Carbide Thread Mill Helical 1/2" 13.00TPI UN TIALN 0.9230 23.44MM LOC 3.5000 88.90MM OAL

ISO: GMTM12-13UN4FL

Call (262) 251-4020 for pricing
Picture of IMCO 63180 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

IMCO 63180 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Ball Nose Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM31224 Carbide 5/16" x 24.00TPI UN 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM31224 Carbide 5/16" x 24.00TPI UN 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM31224

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM28BSPP Carbide 1/16" x 28.00TPI BSPP 0.240 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM28BSPP Carbide 1/16" x 28.00TPI BSPP 0.240 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM28BSPP

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM27NPT Carbide 1/16" x 27.00TPI NPT 0.245 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM27NPT Carbide 1/16" x 27.00TPI NPT 0.245 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM27NPT

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM28BSPT Carbide 1/16" x 28.00TPI BSPT 0.240 Cut Dia Cylindrical 0.5000 2.500 OAL TIALN

Thread MILL USA TM28BSPT Carbide 1/16" x 28.00TPI BSPT 0.240 Cut Dia Cylindrical 0.5000 2.500 OAL TIALN

ISO: TM28BSPT

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM80075 Carbide M8 x 0.75MM Metric 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM80075 Carbide M8 x 0.75MM Metric 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM80075

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM31218 Carbide 5/16" x 18.00TPI UN 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM31218 Carbide 5/16" x 18.00TPI UN 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM31218

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM80125 Carbide M8 x 1.25MM Metric 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM80125 Carbide M8 x 1.25MM Metric 0.235 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM80125

Call (262) 251-4020 for pricing
Picture of Thread MILL USA TM27NPTF Carbide 1/16" x 27.00TPI NPTF 0.245 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

Thread MILL USA TM27NPTF Carbide 1/16" x 27.00TPI NPTF 0.245 Cut Dia Cylindrical 0.2500 2.500 OAL TIALN

ISO: TM27NPTF

Call (262) 251-4020 for pricing
Picture of EMUGE BU219401.5045 Tap 3/8-24.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Coolant Carbide HSSE TiCN

EMUGE BU219401.5045 Tap 3/8-24.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P Coolant Carbide HSSE TiCN

ISO: BU219401.5045

Call (262) 251-4020 for pricing
Picture of AWARD K-1221TIN DIA 3/4 SH 0.7500 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD K-1221TIN DIA 3/4 SH 0.7500 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of VIKING 16471 1-7/16 Annular Drill 1 Length Of Cut Gold Coated

VIKING 16471 1-7/16 Annular Drill 1 Length Of Cut Gold Coated

Call (262) 251-4020 for pricing
Picture of MICRO 100 TM-750 Thread Mill 7.00TPI-16.00TPI UN

MICRO 100 TM-750 Thread Mill 7.00TPI-16.00TPI UN

Call (262) 251-4020 for pricing
Picture of YG-1 GYG69048 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiAlN Single End Corner Radius 0.0400 1.02MM Only One

YG-1 GYG69048 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Powder Metal TiAlN Single End Corner Radius 0.0400 1.02MM Only One

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0531-IQ IC908 .531" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0531-IQ IC908 .531" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0531-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0512-IQ IC908 .512" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0512-IQ IC908 .512" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0512-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0528-IQ IC908 .528" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0528-IQ IC908 .528" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0528-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0551-IQ IC908 .551" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0551-IQ IC908 .551" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0551-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0583-IQ IC908 .583" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0583-IQ IC908 .583" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0583-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0559-IQ IC908 .559" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0559-IQ IC908 .559" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0559-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0539-IQ IC908 .539" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0539-IQ IC908 .539" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0539-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0520-IQ IC908 .520" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0520-IQ IC908 .520" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0520-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0547-IQ IC908 .547" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0547-IQ IC908 .547" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0547-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0516-IQ IC908 .516" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0516-IQ IC908 .516" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0516-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0524-IQ IC908 .524" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0524-IQ IC908 .524" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0524-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0571-IQ IC908 .571" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0571-IQ IC908 .571" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0571-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0543-IQ IC908 .543" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0543-IQ IC908 .543" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0543-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0535-IQ IC908 .535" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0535-IQ IC908 .535" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0535-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0555-IQ IC908 .555" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0555-IQ IC908 .555" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0555-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0563-IQ IC908 .563" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0563-IQ IC908 .563" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0563-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0579-IQ IC908 .579" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0579-IQ IC908 .579" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0579-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0587-IQ IC908 .587" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0587-IQ IC908 .587" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0587-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0575-IQ IC908 .575" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0575-IQ IC908 .575" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0575-IQ IC908

Call (262) 251-4020 for pricing
Picture of ISCAR H3P 0567-IQ IC908 .567" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0567-IQ IC908 .567" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0567-IQ IC908

Call (262) 251-4020 for pricing
Picture of IMCO 68984 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0787 2.00MM Pow-R-Feed Mill

IMCO 68984 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0787 2.00MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of AWARD BK-303TIN DIA 3/16 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BK-303TIN DIA 3/16 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of IMCO 68985 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Feed Mill

IMCO 68985 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4V1513005B DIA 1/2 SH 2.00 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM VariMill I

HANITA/WIDIA TF4V1513005B DIA 1/2 SH 2.00 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0300 0.76MM VariMill I

Call (262) 251-4020 for pricing
Picture of YG-1 EP12040C DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Roughing Flute Standard Helix Powder Metal TiCN Single End Ball Nose ASP

YG-1 EP12040C DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Roughing Flute Standard Helix Powder Metal TiCN Single End Ball Nose ASP

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1950R01 IN2505 0.7677 (19.50 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1950R01 IN2505 0.7677 (19.50 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1950R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1850R01 IN2505 0.7283 (18.50 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1850R01 IN2505 0.7283 (18.50 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1850R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1960R01 IN2505 0.7717 (19.60 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1960R01 IN2505 0.7717 (19.60 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1960R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1940R01 IN2505 0.7638 (19.40 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1940R01 IN2505 0.7638 (19.40 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1940R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1980R01 IN2505 0.7795 (19.80 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1980R01 IN2505 0.7795 (19.80 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1980R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1820R01 IN2505 0.7165 (18.20 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1820R01 IN2505 0.7165 (18.20 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1820R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1870R01 IN2505 0.7362 (18.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1870R01 IN2505 0.7362 (18.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1870R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1810R01 IN2505 0.7126 (18.10 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1810R01 IN2505 0.7126 (18.10 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1810R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1830R01 IN2505 0.7205 (18.30 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1830R01 IN2505 0.7205 (18.30 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1830R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1860R01 IN2505 0.7323 (18.60 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1860R01 IN2505 0.7323 (18.60 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1860R01 IN2505

Call (262) 251-4020 for pricing
Picture of AWARD BL-204-CO DIA 1/8 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BL-204-CO DIA 1/8 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1970R01 IN2505 0.7756 (19.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1970R01 IN2505 0.7756 (19.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1970R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1905R01 IN2505 0.7500 (19.05 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1905R01 IN2505 0.7500 (19.05 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1905R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1840R01 IN2505 0.7244 (18.40 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1840R01 IN2505 0.7244 (18.40 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1840R01 IN2505

Call (262) 251-4020 for pricing
Picture of ISCAR MM TS-A-L080-C10-T06-H SH 0.3937 OAL 3.1500 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

ISCAR MM TS-A-L080-C10-T06-H SH 0.3937 OAL 3.1500 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1900R01 IN2505 0.7480 (19.00 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1900R01 IN2505 0.7480 (19.00 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1900R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1920R01 IN2505 0.7559 (19.20 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1920R01 IN2505 0.7559 (19.20 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1920R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1910R01 IN2505 0.7520 (19.10 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1910R01 IN2505 0.7520 (19.10 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1910R01 IN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL ER25T08SA-05 0.457 Screw ON ER STEEL T08Replacable Head Acc. ER 25 Steel Single End CHIPSURFER

INGERSOLL ER25T08SA-05 0.457 Screw ON ER STEEL T08Replacable Head Acc. ER 25 Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL TKA1990R01 IN2505 0.7835 (19.90 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

INGERSOLL TKA1990R01 IN2505 0.7835 (19.90 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|

ISO: TKA1990R01 IN2505

Call (262) 251-4020 for pricing