Standard Helix

Sort by
Picture of HARVEY Tool 33417-C3 .017 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33417-C3 .017 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 33416-C3 .016 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33416-C3 .016 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 33429-C3 .029 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33429-C3 .029 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 33421-C3 .021 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33421-C3 .021 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 34228-C3 .028 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34228-C3 .028 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 34223-C3 .023 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34223-C3 .023 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 34216-C3 .016 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34216-C3 .016 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 33423-C3 .023 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33423-C3 .023 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 34222-C3 .022 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34222-C3 .022 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 34219-C3 .019 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 34219-C3 .019 BALL Carbide STB FL 8x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HARVEY Tool 33426-C3 .026 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33426-C3 .026 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.30
Picture of HTC 135-4578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-4578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.29
Picture of HTC 135-2578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-2578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.29
Picture of HTC 135-3578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-3578 DIA 37/64 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.29
Picture of MELIN 16269 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

MELIN 16269 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

$64.27
Picture of HARVEY Tool 10231 DIA 0.031 LOC 0.1550 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10231 DIA 0.031 LOC 0.1550 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$64.20
Picture of HARVEY Tool 10240 DIA 0.04 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10240 DIA 0.04 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$64.20
Picture of HARVEY Tool 10225 DIA 0.025 LOC 0.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10225 DIA 0.025 LOC 0.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$64.20
Picture of YG-1 93138 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 93138 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$64.15
Picture of YG-1 42337CN DIA 5/8 SH 0.6250 LOC 1.3750 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt TiN Single End Ball Nose General Purpose

YG-1 42337CN DIA 5/8 SH 0.6250 LOC 1.3750 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt TiN Single End Ball Nose General Purpose

$64.12
Picture of HARVEY Tool 19057-C6 .078 D x 1.5 DEG x .625 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 19057-C6 .078 D x 1.5 DEG x .625 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.10
Picture of HARVEY Tool 35178 DIA 0.078 LOC 0.9400 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 35178 DIA 0.078 LOC 0.9400 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of HARVEY Tool 35193 DIA 0.093 LOC 1.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 35193 DIA 0.093 LOC 1.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of HARVEY Tool 35162 DIA 0.062 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 35162 DIA 0.062 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of ROBBJACK MDM-201-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-201-04 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of ROBBJACK DM-201-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK DM-201-06 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of ROBBJACK MDM-201-05 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-201-05 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$64.10
Picture of HARVEY Tool 10262 DIA 0.062 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10262 DIA 0.062 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$64.10
Picture of MELIN 54068 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN 54068 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.08
Picture of WIDIN WB502100130 DIA 10MM SH 0.3937 LOC 0.7087 OAL 5.1181 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB502100130 DIA 10MM SH 0.3937 LOC 0.7087 OAL 5.1181 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$64.07
Picture of YG-1 GMF17020 DIA 5/16 SH 0.3125 LOC 0.3125 OAL 4.00 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF17020 DIA 5/16 SH 0.3125 LOC 0.3125 OAL 4.00 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$64.04
Picture of HARVEY Tool 33516-C3 .250 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33516-C3 .250 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$64.00
Picture of ICE-ECO-04375-4-4-0875-BN-WLDN-BRITE-DE-R DIA 7/16 SH 0.50 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Double End Ball Nose Blue

ICE-ECO-04375-4-4-0875-BN-WLDN-BRITE-DE-R DIA 7/16 SH 0.50 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Double End Ball Nose Blue

$63.95
Picture of ICE-ECO-04375-2-4-0875-BN-WLDN-BRITE-DE-R DIA 7/16 SH 0.50 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Double End Ball Nose Blue

ICE-ECO-04375-2-4-0875-BN-WLDN-BRITE-DE-R DIA 7/16 SH 0.50 LOC 0.8750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Double End Ball Nose Blue

$63.95
Picture of EMUGE 1966A.004 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

EMUGE 1966A.004 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

$63.95
Picture of EMUGE 1966A.005 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

EMUGE 1966A.005 DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

$63.95
Picture of IMCO 97922 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

IMCO 97922 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

$63.94
Picture of IMCO 62060 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

IMCO 62060 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

$63.94
Picture of IMCO 97921 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

IMCO 97921 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose General Purpose

$63.94
Picture of YG-1 50588TF DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 50588TF DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$63.93
Picture of YG-1 50588TC DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

YG-1 50588TC DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

$63.93
Picture of YG-1 51588TF DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 51588TF DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$63.93
Picture of YG-1 51588TC DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

YG-1 51588TC DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

$63.93
Picture of YG-1 G8A46985 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.3622 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

YG-1 G8A46985 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.3622 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

$63.92
Picture of YG-1 G8A46968 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.5591 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

YG-1 G8A46968 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.5591 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

$63.92
Picture of YG-1 G8A46911 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.3622 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

YG-1 G8A46911 DIA 3MM SH 0.2362 LOC 0.0945 OAL 2.3622 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

$63.92
Picture of HARVEY Tool 49215 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 49215 DIA 0.015 LOC 0.0220 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.90
Picture of WIDIN DB712100S DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN DB712100S DIA 10MM SH 0.3937 LOC 0.5906 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$63.89
Picture of MELIN 54186 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN 54186 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.84
Picture of YG-1 SEM846008126S DIA 0.80MM SH 0.2362 LOC 0.0315 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM846008126S DIA 0.80MM SH 0.2362 LOC 0.0315 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.83
Picture of YG-1 SEM846008146S DIA 0.80MM SH 0.2362 LOC 0.0315 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM846008146S DIA 0.80MM SH 0.2362 LOC 0.0315 OAL 1.771 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.83
Picture of YG-1 53902TC DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

YG-1 53902TC DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

$63.81
Picture of YG-1 52902TC DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

YG-1 52902TC DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose Carbide End Mill

$63.81
Picture of YG-1 53902TF DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 53902TF DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$63.81
Picture of YG-1 52902TF DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

YG-1 52902TF DIA 3/8 SH 0.3750 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Carbide End Mill

$63.81
Picture of HARVEY Tool 59460 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59460 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 970760 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970760 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 10290 DIA 0.09 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10290 DIA 0.09 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.80
Picture of HARVEY Tool 970747 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970747 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 59478 DIA 0.078 LOC 0.1170 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59478 DIA 0.078 LOC 0.1170 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 970762 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970762 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 59447 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59447 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 59462 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 59462 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of HARVEY Tool 10265 DIA 0.065 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10265 DIA 0.065 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.80
Picture of HARVEY Tool 970778 DIA 0.078 LOC 0.1170 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 970778 DIA 0.078 LOC 0.1170 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.80
Picture of WIDIN DB512110 DIA 11MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB512110 DIA 11MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$63.71
Picture of MELIN H0404 DIA 0.093 SH 0.1250 LOC 1.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN H0404 DIA 0.093 SH 0.1250 LOC 1.1250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.71
Picture of MELIN H0389 DIA 0.062 SH 0.1250 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN H0389 DIA 0.062 SH 0.1250 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.71
Picture of WIDIN DB512120 DIA 12MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB512120 DIA 12MM SH 0.4724 LOC 0.9843 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$63.71
Picture of HARVEY Tool 49612-C4 3/16 BALL x 9/16 LOC PLAS, 2 FL, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 49612-C4 3/16 BALL x 9/16 LOC PLAS, 2 FL, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.70
Picture of ICE-ECO-03125-4-6-15-BN-RND-TiALN-EL DIA 5/16 SH 0.3125 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-03125-4-6-15-BN-RND-TiALN-EL DIA 5/16 SH 0.3125 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$63.69
Picture of ICE-ECO-03125-2-6-15-BN-RND-TiALN-EL DIA 5/16 SH 0.3125 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-03125-2-6-15-BN-RND-TiALN-EL DIA 5/16 SH 0.3125 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$63.69
Picture of WIDIN DA542006 DIA 3/16 SH 0.3750 LOC 0.3750 OAL 4.3750 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DA542006 DIA 3/16 SH 0.3750 LOC 0.3750 OAL 4.3750 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$63.65
Picture of WIDIN DA542008 DIA 1/4 SH 0.3750 LOC 0.50 OAL 4.3750 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DA542008 DIA 1/4 SH 0.3750 LOC 0.50 OAL 4.3750 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$63.65
Picture of HARVEY Tool 35635-C4 .035 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35635-C4 .035 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.60
Picture of YG-1 41359CN DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Ball Nose General Purpose

YG-1 41359CN DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Ball Nose General Purpose

$63.57
Picture of MELIN H1199 DIA 0.062 SH 0.1250 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN H1199 DIA 0.062 SH 0.1250 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.55
Picture of M.A. FORD 15619681A DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

M.A. FORD 15619681A DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

$63.43
Picture of M.A. FORD 15619682A DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

M.A. FORD 15619682A DIA 5MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose TuffCut DM®

$63.43
Picture of HTC 135-3515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-3515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.43
Picture of HTC 135-2515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-2515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.43
Picture of YG-1 GMF16020 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16020 DIA 5/16 SH 0.3125 LOC 0.3750 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.43
Picture of HTC 175-4506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 175-4506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.43
Picture of HTC 175-2506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 175-2506 DIA 1/2 SH 0.50 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.43
Picture of HTC 135-4515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HTC 135-4515 DIA 33/64 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.43
Picture of YG-1 G8A43004 DIA 1/16 SH 0.2500 LOC 0.0625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

YG-1 G8A43004 DIA 1/16 SH 0.2500 LOC 0.0625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose X-5070 End Mill

$63.41
Picture of M.A. FORD 14050000 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

M.A. FORD 14050000 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

$63.40
Picture of HARVEY Tool 19064-C6 .093 D x 1.5 DEG x .750 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 19064-C6 .093 D x 1.5 DEG x .750 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.40
Picture of M.A. FORD 15050000 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

M.A. FORD 15050000 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® GP

$63.40
Picture of HARVEY Tool 36943-C6 .093 BALL x 3 DEG x .625 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36943-C6 .093 BALL x 3 DEG x .625 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.40
Picture of HARVEY Tool 19043-C6 .062 D x 1.5 DEG x .500 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 19043-C6 .062 D x 1.5 DEG x .500 RCH, 2 FL, Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.40
Picture of HARVEY Tool 49531-C4 1/32 BALL x 3/32 LOC PLAS, 2 FL, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 49531-C4 1/32 BALL x 3/32 LOC PLAS, 2 FL, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.40
Picture of YG-1 SEM84604035 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84604035 DIA 4MM SH 0.2362 LOC 0.1575 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.39
Picture of YG-1 SEM84605035 DIA 5MM SH 0.2362 LOC 0.2362 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84605035 DIA 5MM SH 0.2362 LOC 0.2362 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.39
Picture of YG-1 SEM84603035 DIA 3MM SH 0.2362 LOC 0.1181 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84603035 DIA 3MM SH 0.2362 LOC 0.1181 OAL 2.7559 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.39
Picture of ISCAR EBLI-A-4 250-500-C250 IC900 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose SolidMill

ISCAR EBLI-A-4 250-500-C250 IC900 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose SolidMill

$63.34
Picture of WIDIN WB502120080 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB502120080 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$63.33
Picture of HARVEY Tool 10255 DIA 0.055 LOC 0.3850 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10255 DIA 0.055 LOC 0.3850 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 33419-C3 .019 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33419-C3 .019 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 35615-C3 .015 BALL Carbide STB FL 12x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 35615-C3 .015 BALL Carbide STB FL 12x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 10250 DIA 0.05 LOC 0.30 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10250 DIA 0.05 LOC 0.30 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 10285 DIA 0.085 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10285 DIA 0.085 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 33424-C3 .024 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33424-C3 .024 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 13820-C3 DIA 0.02 LOC 0.10 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 13820-C3 DIA 0.02 LOC 0.10 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 10280 DIA 0.08 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10280 DIA 0.08 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 10293 DIA 0.093 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10293 DIA 0.093 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 33428-C3 .028 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33428-C3 .028 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 33418-C3 .018 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 33418-C3 .018 BALL Carbide STB FL 5x RCH EM, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of HARVEY Tool 10270 DIA 0.07 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10270 DIA 0.07 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 10295 DIA 0.095 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10295 DIA 0.095 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 10278 DIA 0.078 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10278 DIA 0.078 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.30
Picture of HARVEY Tool 966015-C3 .015 BALL Carbide STB FL 10x RCH EM AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 966015-C3 .015 BALL Carbide STB FL 10x RCH EM AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.30
Picture of YG-1 GMF16905 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16905 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.29
Picture of WIDIN WGB504A016 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB504A016 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$63.29
Picture of WIDIN WGB504A012 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB504A012 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$63.29
Picture of YG-1 GMF16903 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16903 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.29
Picture of YG-1 GMF16904 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 GMF16904 DIA 0.30MM SH 0.1875 LOC 0.0100 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$63.29
Picture of WIDIN WGB534A0160750-4 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB534A0160750-4 DIA 1/4 SH 0.2500 LOC 0.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$63.29
Picture of ROBBJACK SB-301-12 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK SB-301-12 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.20
Picture of HARVEY Tool 35708-C4 .125 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35708-C4 .125 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.20
Picture of ROBBJACK SB-201-12 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK SB-201-12 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.20
Picture of HARVEY Tool 966108-C4 .125 BALL Carbide STB FL 10x RCH EM, DMD End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 966108-C4 .125 BALL Carbide STB FL 10x RCH EM, DMD End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.20
Picture of HARVEY Tool 36931-C6 .031 BALL x 3 DEG x .1.518 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 36931-C6 .031 BALL x 3 DEG x .1.518 RCH 2 FL Nano End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$63.20
Picture of HARVEY Tool 49515 DIA 1/64 LOC 0.0470 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 49515 DIA 1/64 LOC 0.0470 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$63.20
Picture of ICE-ECO-0375-4-4-175-BN-RND-TiALN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0375-4-4-175-BN-RND-TiALN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$63.15
Picture of ICE-ECO-0375-2-4-175-BN-RND-TiALN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

ICE-ECO-0375-2-4-175-BN-RND-TiALN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Blue

$63.15
Picture of HARVEY Tool 10247 DIA 0.047 LOC 0.2500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10247 DIA 0.047 LOC 0.2500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.10
Picture of HARVEY Tool 10308 DIA 1/8 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10308 DIA 1/8 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.10
Picture of HARVEY Tool 10245 DIA 0.045 LOC 0.2250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10245 DIA 0.045 LOC 0.2250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.10
Picture of HARVEY Tool 10275 DIA 0.075 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10275 DIA 0.075 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.10
Picture of HARVEY Tool 10300 DIA 0.1 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 10300 DIA 0.1 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.10
Picture of IMCO 34532 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose General Purpose

IMCO 34532 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose General Purpose

$63.07
Picture of HARVEY Tool 12810-C4 DIA 0.25MM LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 12810-C4 DIA 0.25MM LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$63.00
Picture of HARVEY Tool 35640-C4 .040 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35640-C4 .040 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.90
Picture of HARVEY Tool 966040-C4 .040 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 966040-C4 .040 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.90
Picture of HTC 143-2562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-2562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of HTC 143-2625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-2625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of HTC 143-4562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-4562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of HTC 143-4625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-4625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of HTC 143-3625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-3625 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of HTC 143-3562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

HTC 143-3562 DIA 9/16 SH 0.5625 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Ball Nose

$62.89
Picture of WIDIN WGB514A0020500-3 DIA 1/32 SH 0.1250 LOC 0.0937 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB514A0020500-3 DIA 1/32 SH 0.1250 LOC 0.0937 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.88
Picture of WIDIN WGB514A0020312-3 DIA 1/32 SH 0.1250 LOC 0.0937 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN WGB514A0020312-3 DIA 1/32 SH 0.1250 LOC 0.0937 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.88
Picture of WIDIN ZSTNB3040-40-10 DIA 4MM SH 0.3150 LOC 0.3150 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB3040-40-10 DIA 4MM SH 0.3150 LOC 0.3150 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2004-3-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2004-3-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of MELIN 56584 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN 56584 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$62.81
Picture of WIDIN ZSTNB2004-2-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2004-2-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2009-24-04 DIA 0.90MM SH 0.1575 LOC 0.0236 OAL 2.755 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2009-24-04 DIA 0.90MM SH 0.1575 LOC 0.0236 OAL 2.755 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2003-2-04 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2003-2-04 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2060-50-10 DIA 6MM SH 0.3150 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2060-50-10 DIA 6MM SH 0.3150 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2030-60-09 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2030-60-09 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB3050-40-10 DIA 5MM SH 0.3150 LOC 0.3937 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB3050-40-10 DIA 5MM SH 0.3150 LOC 0.3937 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2004-4-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2004-4-04 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2010-60-09 DIA 1MM SH 0.2362 LOC 0.0315 OAL 4.1339 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2010-60-09 DIA 1MM SH 0.2362 LOC 0.0315 OAL 4.1339 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB3030-40-09 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB3030-40-09 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2040-50-10 DIA 4MM SH 0.3150 LOC 0.3150 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2040-50-10 DIA 4MM SH 0.3150 LOC 0.3150 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2004-4-09 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2004-4-09 DIA 0.40MM SH 0.1575 LOC 0.0118 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2020-60-09 DIA 2MM SH 0.2362 LOC 0.0669 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2020-60-09 DIA 2MM SH 0.2362 LOC 0.0669 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB2003-3-09 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB2003-3-09 DIA 0.30MM SH 0.1575 LOC 0.0098 OAL 1.968 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of WIDIN ZSTNB3030-40-04 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

WIDIN ZSTNB3030-40-04 DIA 3MM SH 0.2362 LOC 0.0984 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-STAR

$62.81
Picture of EMUGE 1966A.01875 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

EMUGE 1966A.01875 DIA 3/16 SH 0.2500 LOC 0.1875 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TOP-Cut

$62.80
Picture of EMUGE 1973A.006 DIA 6MM SH 0.2362 LOC 0.1378 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1973A.006 DIA 6MM SH 0.2362 LOC 0.1378 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$62.80
Picture of EMUGE 1976A.006 DIA 6MM SH 0.2362 LOC 0.2362 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

EMUGE 1976A.006 DIA 6MM SH 0.2362 LOC 0.2362 OAL 2.2441 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose Hard-Cut

$62.80
Picture of IMCO 66806 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

IMCO 66806 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Ball Nose enDURO Mill

$62.78
Picture of MELIN H0787 DIA 0.25MM SH 0.1250 LOC 0.0150 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN H0787 DIA 0.25MM SH 0.1250 LOC 0.0150 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$62.77
Picture of MELIN H0928 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

MELIN H0928 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$62.77
Picture of YG-1 SEM84601040 DIA 1MM SH 0.1575 LOC 0.0394 OAL 3.1496 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84601040 DIA 1MM SH 0.1575 LOC 0.0394 OAL 3.1496 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$62.75
Picture of WIDIN IM-WGB5040303060SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN IM-WGB5040303060SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.75
Picture of WIDIN IM-WGB5040301560SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN IM-WGB5040301560SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.75
Picture of WIDIN IM-WGB5040302060SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN IM-WGB5040302060SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.75
Picture of YG-1 SEM84601540 DIA 1.50MM SH 0.1575 LOC 0.0591 OAL 3.149 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

YG-1 SEM84601540 DIA 1.50MM SH 0.1575 LOC 0.0591 OAL 3.149 End Mill Standard Helix Standard Helix Carbide TiAlN Single End Ball Nose 4G Mill

$62.75
Picture of WIDIN IM-WGB5040302560SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

WIDIN IM-WGB5040302560SP DIA 3MM SH 0.1575 LOC 0.3543 OAL 2.3622 End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose Z-GRA-MATE

$62.75
Picture of WIDIN WB5420205040 DIA 2MM SH 0.3937 LOC 0.0787 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB5420205040 DIA 2MM SH 0.3937 LOC 0.0787 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$62.69
Picture of WIDIN WB5420305040 DIA 3MM SH 0.3937 LOC 0.1770 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB5420305040 DIA 3MM SH 0.3937 LOC 0.1770 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$62.69
Picture of MELIN 16268 DIA 5/16 SH 0.3750 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

MELIN 16268 DIA 5/16 SH 0.3750 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Double End Ball Nose

$62.68
Picture of MELIN 59594 DIA 13/32 SH 0.4375 LOC 0.2756 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

MELIN 59594 DIA 13/32 SH 0.4375 LOC 0.2756 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$62.57
Picture of WIDIN DA512016 DIA 1/2 SH 0.50 LOC 0.8750 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DA512016 DIA 1/2 SH 0.50 LOC 0.8750 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$62.57
Picture of YG-1 48584TE DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Ball Nose Carbide End Mill

YG-1 48584TE DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Ball Nose Carbide End Mill

$62.56
Picture of HARVEY Tool 966116 DIA 1/4 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

HARVEY Tool 966116 DIA 1/4 LOC 0.3750 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$62.50
Picture of M.A. FORD 138B43751 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

M.A. FORD 138B43751 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

$62.48
Picture of M.A. FORD 135B43751 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® AL

M.A. FORD 135B43751 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® AL

$62.48
Picture of M.A. FORD 138B39370 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

M.A. FORD 138B39370 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose TuffCut® X-AL

$62.48
Picture of HARVEY Tool 35630-C4 .030 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35630-C4 .030 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.40
Picture of HARVEY Tool 35625-C4 .025 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35625-C4 .025 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.40
Picture of ROBBJACK MDM-206-02 DIA 2MM SH 0.2362 LOC 0.0787 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

ROBBJACK MDM-206-02 DIA 2MM SH 0.2362 LOC 0.0787 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Ball Nose

$62.40
Picture of HARVEY Tool 35631-C4 .031 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 35631-C4 .031 BALL Carbide STB FL 12x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.40
Picture of HARVEY Tool 966031-C4 .031 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

HARVEY Tool 966031-C4 .031 BALL Carbide STB FL 10x RCH EM, DIAMND End Mill Standard Flute Standard Helix Carbide Diamond Single End Ball Nose

$62.40
Picture of WIDIN DB532100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB532100 DIA 10MM SH 0.3937 LOC 0.4331 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$62.37
Picture of WIDIN DB532101 DIA 10MM SH 0.3937 LOC 0.3110 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

WIDIN DB532101 DIA 10MM SH 0.3937 LOC 0.3110 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose Z-CLASSIC

$62.37
Picture of WIDIN WB5420202080 DIA 2MM SH 0.3150 LOC 0.0787 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

WIDIN WB5420202080 DIA 2MM SH 0.3150 LOC 0.0787 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose WINNER

$62.37
Picture of YG-1 41357CF DIA 3/4 SH 0.50 LOC 1.3125 OAL 3.3125 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

YG-1 41357CF DIA 3/4 SH 0.50 LOC 1.3125 OAL 3.3125 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

$62.32
Picture of YG-1 41357CC DIA 3/4 SH 0.50 LOC 1.3125 OAL 3.3125 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

YG-1 41357CC DIA 3/4 SH 0.50 LOC 1.3125 OAL 3.3125 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

$62.32
Picture of HARVEY Tool 76815-C3 .015 BALL Carbide LG RCH EM-4 FL AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

HARVEY Tool 76815-C3 .015 BALL Carbide LG RCH EM-4 FL AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Ball Nose

$62.30
Picture of ROBBJACK B-333-09-DLC DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK B-333-09-DLC DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$62.30
Picture of ROBBJACK B-203-09-DLC DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

ROBBJACK B-203-09-DLC DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

$62.30
Picture of ICE-ECO-0375-2-6-3-BN-RND-BRITE-EL DIA 3/8 SH 0.3750 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Ball Nose Blue

ICE-ECO-0375-2-6-3-BN-RND-BRITE-EL DIA 3/8 SH 0.3750 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Ball Nose Blue

$62.24
Picture of ICE-ECO-0375-4-6-3-BN-RND-BRITE-EL DIA 3/8 SH 0.3750 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Ball Nose Blue

ICE-ECO-0375-4-6-3-BN-RND-BRITE-EL DIA 3/8 SH 0.3750 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Ball Nose Blue

$62.24
Picture of WIDIN DB34205015 DIA 5MM SH 0.3150 LOC 0.3937 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

WIDIN DB34205015 DIA 5MM SH 0.3150 LOC 0.3937 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

$62.20
Picture of WIDIN DB34206015 DIA 6MM SH 0.3150 LOC 0.4724 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

WIDIN DB34206015 DIA 6MM SH 0.3150 LOC 0.4724 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose THUNDER

$62.20
Picture of MELIN 10428 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

MELIN 10428 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Ball Nose

$62.11