Medical

Sort by
Picture of MELIN H7304 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

MELIN H7304 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 15541 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15541 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of ISCAR FPI 0677 IC908 0.677 Exchangeable General Use Drill ing Heads

ISCAR FPI 0677 IC908 0.677 Exchangeable General Use Drill ing Heads

ISO: FPI 0677 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44443 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44443 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44326 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 44326 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 19740 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19740 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN H7186 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0100 0.25MM

MELIN H7186 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14838 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14838 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-03125-2-25-08125-BN-RND-ZrN-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-03125-2-25-08125-BN-RND-ZrN-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 15543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 64644 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64644 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44481 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0400 1.02MM

MELIN 44481 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0400 1.02MM

Call (262) 251-4020 for pricing
Picture of MELIN 62872 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62872 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 19789 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 19789 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 17781 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 17781 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 14855 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14855 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 57709 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

MELIN 57709 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 15563 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15563 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ISCAR FKI 0433 IC908 .433" Exchangeable Drill ing Heads for Cast Iron

ISCAR FKI 0433 IC908 .433" Exchangeable Drill ing Heads for Cast Iron

ISO: FKI 0433 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44567 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44567 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44330 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44330 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 340780 DIA 3/16 SH 0.1875 LOC 0.3125 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 340780 DIA 3/16 SH 0.1875 LOC 0.3125 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN H7245 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7245 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-075-3-4-15-BN-RND-ZrN-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-075-3-4-15-BN-RND-ZrN-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 15667 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15667 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64672 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64672 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44579 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44579 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 63318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 63318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 341020 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 341020 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 19291 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 19291 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14872 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14872 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 60630 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60630 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 15705 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15705 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of ISCAR FKI 0689 IC908 .689" Exchangeable Drill ing Heads for Cast Iron

ISCAR FKI 0689 IC908 .689" Exchangeable Drill ing Heads for Cast Iron

ISO: FKI 0689 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44592 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 44592 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 44435 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44435 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 341330 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 341330 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN H7276 DIA 4.75MM SH 0.2500 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7276 DIA 4.75MM SH 0.2500 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14876 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14876 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-1-3-5-225-BN-RND-ZrN-L-VPH DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-1-3-5-225-BN-RND-ZrN-L-VPH DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 15707 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15707 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64693 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 64693 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44597 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44597 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 63320 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 63320 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 341800 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 341800 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 19292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 19292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14891 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14891 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 60632 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60632 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 15808 DIA 3/32 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 15808 DIA 3/32 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of ISCAR FPI 0752 IC908 0.752 Exchangeable General Use Drill ing Heads

ISCAR FPI 0752 IC908 0.752 Exchangeable General Use Drill ing Heads

ISO: FPI 0752 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44609 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44609 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44441 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44441 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 342160 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 342160 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN H7278 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7278 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14892 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14892 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-05-2-4-2-BN-RND-ZrN-L-VPH DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-05-2-4-2-BN-RND-ZrN-L-VPH DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 15826 0.098 DIA Single Point 60deg 2 Over All

MELIN 15826 0.098 DIA Single Point 60deg 2 Over All

Call (262) 251-4020 for pricing
Picture of MELIN 64797 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64797 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44620 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44620 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 63624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 342400 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 342400 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 19293 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19293 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14893 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14893 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 60636 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60636 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-306 .305x5/8x3/8x3 NPT ThreadMills

MASTERCUT 290-306 .305x5/8x3/8x3 NPT ThreadMills

Call (262) 251-4020 for pricing
Picture of ISCAR FPI 0760 IC908 0.760 Exchangeable General Use Drill ing Heads

ISCAR FPI 0760 IC908 0.760 Exchangeable General Use Drill ing Heads

ISO: FPI 0760 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44634 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44634 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44442 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44442 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 342470 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 342470 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 57732 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

MELIN 57732 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

Call (262) 251-4020 for pricing
Picture of MELIN 14938 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14938 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-075-3-5-225-BN-RND-ZrN-L-VPH DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-075-3-5-225-BN-RND-ZrN-L-VPH DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-314 .620x1-1/8x3/4x4 ThreadMills

MASTERCUT 290-314 .620x1-1/8x3/4x4 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 64804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

MELIN 64804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44671 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

MELIN 44671 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 63715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 342660 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 342660 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 19322 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 19322 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14940 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14940 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 60690 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60690 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 10843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 10843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ISCAR FKI 0657 IC908 .657" Exchangeable Drill ing Heads for Cast Iron

ISCAR FKI 0657 IC908 .657" Exchangeable Drill ing Heads for Cast Iron

ISO: FKI 0657 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44676 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44676 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44484 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

MELIN 44484 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 34340 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34340 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 60678 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60678 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 14941 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14941 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-0375-2-4-175-SQ-RND-ZrN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Square Sharp Green

ICE-NFE-0375-2-4-175-SQ-RND-ZrN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Square Sharp Green

Call (262) 251-4020 for pricing
Picture of MELIN 11706 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 11706 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 64835 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

MELIN 64835 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44690 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44690 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 64111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 64111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 34360 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34360 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 19324 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19324 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14955 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14955 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 60700 DIA 1/4 SH 0.3750 LOC 1.7500 OAL 3.5620 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60700 DIA 1/4 SH 0.3750 LOC 1.7500 OAL 3.5620 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 11893 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 11893 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ISCAR FKI 0665 IC908 .665" Exchangeable Drill ing Heads for Cast Iron

ISCAR FKI 0665 IC908 .665" Exchangeable Drill ing Heads for Cast Iron

ISO: FKI 0665 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44699 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44699 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44574 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44574 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 34362 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34362 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 60684 DIA 3/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60684 DIA 3/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 14956 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14956 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-05-2-6-3-BN-RND-ZrN-EL DIA 1/2 SH 0.50 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-05-2-6-3-BN-RND-ZrN-EL DIA 1/2 SH 0.50 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 11991 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 11991 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 64838 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64838 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44801 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

MELIN 44801 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 64123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

MELIN 64123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34368 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34368 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 19342 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19342 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14975 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

MELIN 14975 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 61443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0157 0.40MM

MELIN 61443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0157 0.40MM

Call (262) 251-4020 for pricing
Picture of MELIN 12174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of ISCAR FKI 0567 IC908 .567" Exchangeable Drill ing Heads for Cast Iron

ISCAR FKI 0567 IC908 .567" Exchangeable Drill ing Heads for Cast Iron

ISO: FKI 0567 IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44813 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44813 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44604 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44604 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34392 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34392 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 60710 DIA 5/8 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60710 DIA 5/8 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 15008 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15008 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-1-2-4-15-030-RND-BRITE-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0300 0.76MM Green

ICE-NFE-1-2-4-15-030-RND-BRITE-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0300 0.76MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 12234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 12234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44823 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44823 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 64223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 64223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34448 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34448 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 19344 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19344 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15009 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15009 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 61447 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 61447 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 12510 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 12510 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0429-SK IC908 .429" DCM Drill Heads for Cast Iron

ISCAR IDI 0429-SK IC908 .429" DCM Drill Heads for Cast Iron

ISO: IDI 0429-SK IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44834 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44834 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44605 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44605 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34569 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34569 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 60716 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60716 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 15024 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 15024 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-025-3-25-075-020-RND-BRITE-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0200 0.51MM Green

ICE-NFE-025-3-25-075-020-RND-BRITE-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0200 0.51MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 12513 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 12513 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 64858 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64858 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44853 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44853 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 64354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 34601 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34601 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 19927 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19927 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 15026 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15026 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 61985 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 61985 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 12533 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 12533 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of ISCAR IDI 0933-SK IC908 .933" DCM Drill Heads for Cast Iron

ISCAR IDI 0933-SK IC908 .933" DCM Drill Heads for Cast Iron

ISO: IDI 0933-SK IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44855 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44855 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44606 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44606 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34628 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34628 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 61645 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 61645 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 15057 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 15057 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-03125-3-25-08125-010-RND-BRITE-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0100 0.25MM Green

ICE-NFE-03125-3-25-08125-010-RND-BRITE-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0100 0.25MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 13132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 64867 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 64867 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44862 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44862 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64377 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 64377 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 34652 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34652 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 19940 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 19940 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 15059 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 15059 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 62234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 13133 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 13133 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0279-2M IC908 .279" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0279-2M IC908 .279" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0279-2M IC908

Call (262) 251-4020 for pricing
Picture of MELIN 44889 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44889 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 34660 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34660 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 61777 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 61777 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 15073 DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15073 DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-0375-2-3-1125-SQ-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

ICE-NFE-0375-2-3-1125-SQ-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

Call (262) 251-4020 for pricing
Picture of MELIN 13304 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13304 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 64894 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 64894 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44891 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44891 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 64397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34662 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34662 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 19951 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19951 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 62237 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 62237 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 13306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 13306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0453 IC907 .453" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0453 IC907 .453" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0453 IC907

Call (262) 251-4020 for pricing
Picture of MELIN 44955 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44955 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44674 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44674 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361020 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 361020 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 61989 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 61989 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 15195 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

MELIN 15195 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-075-3-4-15-BN-RND-BRITE-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

ICE-NFE-075-3-4-15-BN-RND-BRITE-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 13321 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 13321 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 64899 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64899 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44981 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44981 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 361160 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 361160 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 33124 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33124 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 15227 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 15227 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 62443 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 62443 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 13338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 13338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of ISCAR ICK 0543 IC907 .543" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0543 IC907 .543" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0543 IC907

Call (262) 251-4020 for pricing
Picture of MELIN 44988 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44988 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 361520 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 361520 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 62180 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 62180 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15229 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15229 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing