Agricultural

Sort by
Picture of ISCAR ICP 1043 IC908 1.043" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1043 IC908 1.043" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1043 IC908

$159.62
Picture of ISCAR ICP 1063 IC908 1.063" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1063 IC908 1.063" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1063 IC908

$159.62
Picture of ISCAR ICP 1035 IC908 1.035" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1035 IC908 1.035" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1035 IC908

$159.62
Picture of ISCAR ICP 1070 IC908 1.070" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1070 IC908 1.070" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1070 IC908

$159.62
Picture of ISCAR ICP 1102 IC908 1.102" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1102 IC908 1.102" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1102 IC908

$159.62
Picture of ISCAR ICP 1086 IC908 1.086" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1086 IC908 1.086" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1086 IC908

$159.62
Picture of ISCAR ICP 1074 IC908 1.074" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1074 IC908 1.074" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1074 IC908

$159.62
Picture of ISCAR ICP 1047 IC908 1.047" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1047 IC908 1.047" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1047 IC908

$159.62
Picture of ISCAR ICP 1094 IC908 1.094" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1094 IC908 1.094" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1094 IC908

$159.62
Picture of ISCAR ICP 1083 IC908 1.083" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1083 IC908 1.083" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1083 IC908

$159.62
Picture of ISCAR ICP 1039 IC908 1.039" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1039 IC908 1.039" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1039 IC908

$159.62
Picture of ISCAR ICP 1059 IC908 1.059" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1059 IC908 1.059" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1059 IC908

$159.62
Picture of ISCAR ICP 1027 IC908 1.027" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1027 IC908 1.027" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1027 IC908

$159.62
Picture of ISCAR ICP 1098 IC908 1.098" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1098 IC908 1.098" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1098 IC908

$159.62
Picture of ISCAR ICP 1051 IC908 1.051" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1051 IC908 1.051" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1051 IC908

$159.62
Picture of EMUGE CU51C400.5717 Tap 1/2-20.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P Cobalt HSSE GLT-1

EMUGE CU51C400.5717 Tap 1/2-20.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P Cobalt HSSE GLT-1

ISO: CU51C400.5717

$159.59
Picture of AWARD KK-1221-COTIN DIA 3/4 SH 0.7500 LOC 5.2500 OAL 7.7500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD KK-1221-COTIN DIA 3/4 SH 0.7500 LOC 5.2500 OAL 7.7500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 80904PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

YG-1 80904PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0600 1.52MM ASP

$159.55
Picture of YG-1 80906PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

YG-1 80906PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.1200 3.05MM ASP

$159.55
Picture of YG-1 80905PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

YG-1 80905PC DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Powder Metal TiCN Single End Corner Radius 0.0900 2.29MM ASP

$159.55
Picture of WIDIN PK503120 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN PK503120 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1401189 M18-2.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401189 M18-2.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of EMUGE CU38Q200.5046 Tap 7/16-20.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant Cobalt HSSE-Powder Metal TiCN

EMUGE CU38Q200.5046 Tap 7/16-20.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant Cobalt HSSE-Powder Metal TiCN

ISO: CU38Q200.5046

$159.42
Picture of EMUGE CU44Q200.5046 Tap 7/16-20.00TPI Bottoming NF/UNF/UNEF DINSI 1.5P-2.0P Coolant HSSE-Powder Metal TiCN

EMUGE CU44Q200.5046 Tap 7/16-20.00TPI Bottoming NF/UNF/UNEF DINSI 1.5P-2.0P Coolant HSSE-Powder Metal TiCN

ISO: CU44Q200.5046

$159.42
Picture of LMT FETTE 1401323 M18-1.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401323 M18-1.50MM Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1401474 3/8-24.00TPI Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401474 3/8-24.00TPI Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of ISCAR MM TS-A-L090-C12-T08-H SH 0.4724 OAL 3.5430 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

ISCAR MM TS-A-L090-C12-T08-H SH 0.4724 OAL 3.5430 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

$159.36
Picture of ISCAR MM S-A-H004-ER20-T10 SH 0.7874 OAL 1.3980 Replacable Head Acc. ER 32 Steel Single End MULTI-MASTER

ISCAR MM S-A-H004-ER20-T10 SH 0.7874 OAL 1.3980 Replacable Head Acc. ER 32 Steel Single End MULTI-MASTER

$159.36
Picture of TUNGALOY VBE160L12.0-BGA02S10 KS15F DIA 16MM SH T10 LOC 0.4724 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Ball Nose TUNG MEISTER

TUNGALOY VBE160L12.0-BGA02S10 KS15F DIA 16MM SH T10 LOC 0.4724 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VFX120L0.60R18H04S08 AH725 DIA 12MM SH T06 LOC 0.0236 OAL 0.6496End Mill,Replacable Head Carbide TiAlN Single End High Feed0.0709 1.80MM TUNG MEISTER

TUNGALOY VFX120L0.60R18H04S08 AH725 DIA 12MM SH T06 LOC 0.0236 OAL 0.6496End Mill,Replacable Head Carbide TiAlN Single End High Feed0.0709 1.80MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 67908 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

YG-1 67908 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

$159.29
Picture of YG-1 67907 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

YG-1 67907 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

$159.29
Picture of YG-1 67909 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

YG-1 67909 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

$159.29
Picture of INGERSOLL S016T06SK034 SH 0.6299 OAL 4.9213Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

INGERSOLL S016T06SK034 SH 0.6299 OAL 4.9213Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

$159.25
Picture of INGERSOLL S062T06SK-13 SH 0.6250 OAL 5.00 Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

INGERSOLL S062T06SK-13 SH 0.6250 OAL 5.00 Replacable Head Acc. Straight Shank/Taper Neck Steel Single End CHIPSURFER

$159.25
Picture of INGERSOLL WB100T12SA-00 SH 1.00 OAL 3.00 Replacable Head Acc. Straight/Weldon Steel Single End CHIPSURFER

INGERSOLL WB100T12SA-00 SH 1.00 OAL 3.00 Replacable Head Acc. Straight/Weldon Steel Single End CHIPSURFER

$159.25
Picture of LMT FETTE 1401467 3/8-16.00TPI Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401467 3/8-16.00TPI Roll Form Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of AWARD BL-309TIN DIA 3/16 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BL-309TIN DIA 3/16 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD R-613TIN DIA 3/8 SH 1.00 LOC 3.2500 OAL 5.6250 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD R-613TIN DIA 3/8 SH 1.00 LOC 3.2500 OAL 5.6250 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD M15-052-CBTIALN DIA 5/64 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD M15-052-CBTIALN DIA 5/64 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD KX-1221TIN DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD KX-1221TIN DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1402562 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1402562 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V6513025CW DIA 1/2 SH 0.50 LOC 2.50 OAL 4.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM VariMill I

HANITA/WIDIA 4V6513025CW DIA 1/2 SH 0.50 LOC 2.50 OAL 4.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM VariMill I

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V6516016CW DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.1250 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM VariMill I

HANITA/WIDIA 4V6516016CW DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.1250 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM VariMill I

Call (262) 251-4020 for pricing
Picture of AWARD L-1221-CO DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-1221-CO DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD BK-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BK-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.7500 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of EMUGE CU219401.5013 Tap 1/2-13.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant Carbide HSSE TiCN

EMUGE CU219401.5013 Tap 1/2-13.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant Carbide HSSE TiCN

ISO: CU219401.5013

$158.61
Picture of EMUGE CU309600.5665 Tap 7/16-14.00TPI Plug LK-UNC DINSI 4P-5P Cobalt HSSE TiCN

EMUGE CU309600.5665 Tap 7/16-14.00TPI Plug LK-UNC DINSI 4P-5P Cobalt HSSE TiCN

ISO: CU309600.5665

$158.54
Picture of EMUGE CU459600.5665 Tap 7/16-14.00TPI Mod Bottom LK-UNC DINSI 2.0P-3.0P Cobalt HSSE TiCN

EMUGE CU459600.5665 Tap 7/16-14.00TPI Mod Bottom LK-UNC DINSI 2.0P-3.0P Cobalt HSSE TiCN

ISO: CU459600.5665

$158.54
Picture of EMUGE B195R501.0100 Tap Mod Bottom M10-1.50MM 6H Metric DIN/DIN Coolant HSSE-Powder Metal TiCN

EMUGE B195R501.0100 Tap Mod Bottom M10-1.50MM 6H Metric DIN/DIN Coolant HSSE-Powder Metal TiCN

ISO: B195R501.0100

$158.47
Picture of EMUGE B196R501.0100 Tap Bottoming M10-1.50MM 6H Metric DIN/DIN Coolant HSSE-Powder Metal TiCN

EMUGE B196R501.0100 Tap Bottoming M10-1.50MM 6H Metric DIN/DIN Coolant HSSE-Powder Metal TiCN

ISO: B196R501.0100

$158.47
Picture of YG-1 G90840 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

YG-1 G90840 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

$158.39
Picture of YG-1 G92940 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

YG-1 G92940 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

$158.39
Picture of AWARD V-509-CO DIA 5/16 SH 1.00 LOC 2.2500 OAL 4.8750 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD V-509-CO DIA 5/16 SH 1.00 LOC 2.2500 OAL 4.8750 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD V-609-CO DIA 3/8 SH 1.2500 LOC 2.2500 OAL 4.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD V-609-CO DIA 3/8 SH 1.2500 LOC 2.2500 OAL 4.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 80541 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Powder Metal Uncoated Single End Square Sharp ASP

YG-1 80541 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Powder Metal Uncoated Single End Square Sharp ASP

$158.23
Picture of YG-1 E9990904 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Square Sharp Tank-Power End Mill

YG-1 E9990904 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Powder Metal Uncoated Single End Square Sharp Tank-Power End Mill

$158.16
Picture of AWARD N-206-CBTIALN DIA 1/8 SH 0.3750 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD N-206-CBTIALN DIA 1/8 SH 0.3750 LOC 1.50 OAL 3.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of ISCAR FCP 0957 IC908 .957" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0957 IC908 .957" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0957 IC908

$157.99
Picture of ISCAR ICM 1020 IC908 1.020" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1020 IC908 1.020" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1020 IC908

$157.99
Picture of ISCAR ICM 1011 IC908 1.011" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1011 IC908 1.011" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1011 IC908

$157.99
Picture of ISCAR ICM 1024 IC908 1.024" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1024 IC908 1.024" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1024 IC908

$157.99
Picture of ISCAR FCP 1020 IC908 1.020" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1020 IC908 1.020" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1020 IC908

$157.99
Picture of ISCAR FCP 1012 IC908 1.012" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1012 IC908 1.012" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1012 IC908

$157.99
Picture of ISCAR ICM 1008 IC908 1.008" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1008 IC908 1.008" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1008 IC908

$157.99
Picture of ISCAR ICM 0961 IC908 .961" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0961 IC908 .961" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0961 IC908

$157.99
Picture of ISCAR ICK 0878-2M IC908 .878" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0878-2M IC908 .878" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0878-2M IC908

$157.99
Picture of ISCAR ICM 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1016 IC908

$157.99
Picture of ISCAR FCP 0953 IC908 .953" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0953 IC908 .953" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0953 IC908

$157.99
Picture of ISCAR ICK 0874-2M IC908 .874" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0874-2M IC908 .874" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0874-2M IC908

$157.99
Picture of ISCAR FCP 1000 IC908 1.000" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1000 IC908 1.000" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1000 IC908

$157.99
Picture of ISCAR ICK 0933-2M IC908 .933" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0933-2M IC908 .933" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0933-2M IC908

$157.99
Picture of ISCAR ICM 0957 IC908 .957" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0957 IC908 .957" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0957 IC908

$157.99
Picture of ISCAR MM ERS500B75-4T08 IC908 DIA 1/2 SH T08 LOC 0.7500 OAL 1.0630Screw On Head Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

ISCAR MM ERS500B75-4T08 IC908 DIA 1/2 SH T08 LOC 0.7500 OAL 1.0630Screw On Head Carbide TiAlN Single End 45.0° Chamfer MULTI-MASTER

$157.99
Picture of ISCAR FCP 0972 IC908 .972" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0972 IC908 .972" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0972 IC908

$157.99
Picture of ISCAR ICM 0976 IC908 .976" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0976 IC908 .976" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0976 IC908

$157.99
Picture of ISCAR FCP 0980 IC908 .980" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0980 IC908 .980" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0980 IC908

$157.99
Picture of ISCAR ICK 0882-2M IC908 .882" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0882-2M IC908 .882" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0882-2M IC908

$157.99
Picture of ISCAR ICM 0953 IC908 .953" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0953 IC908 .953" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0953 IC908

$157.99
Picture of ISCAR ICK 0937-2M IC908 .937" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0937-2M IC908 .937" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0937-2M IC908

$157.99
Picture of ISCAR ICM 0972 IC908 .972" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0972 IC908 .972" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0972 IC908

$157.99
Picture of ISCAR ICK 0890-2M IC908 .890" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0890-2M IC908 .890" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0890-2M IC908

$157.99
Picture of ISCAR ICK 0886-2M IC908 .886" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0886-2M IC908 .886" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0886-2M IC908

$157.99
Picture of ISCAR ICK 0870-2M IC908 .870" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0870-2M IC908 .870" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0870-2M IC908

$157.99
Picture of ISCAR ICM 0945 IC908 .945" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0945 IC908 .945" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0945 IC908

$157.99
Picture of ISCAR ICM 0949 IC908 .949" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0949 IC908 .949" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0949 IC908

$157.99
Picture of ISCAR FCP 0949 IC908 .949" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0949 IC908 .949" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0949 IC908

$157.99
Picture of ISCAR ICK 0941-2M IC908 .941" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0941-2M IC908 .941" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0941-2M IC908

$157.99
Picture of ISCAR ICM 0969 IC908 .969" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0969 IC908 .969" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0969 IC908

$157.99
Picture of ISCAR FCP 0945 IC908 .945" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0945 IC908 .945" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0945 IC908

$157.99
Picture of ISCAR FCP 1016 IC908 1.016" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1016 IC908 1.016" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1016 IC908

$157.99
Picture of ISCAR ICK 0909-2M IC908 .909" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0909-2M IC908 .909" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0909-2M IC908

$157.99
Picture of ISCAR ICM 0996 IC908 .996" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0996 IC908 .996" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0996 IC908

$157.99
Picture of ISCAR FCP 0965 IC908 .965" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0965 IC908 .965" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0965 IC908

$157.99
Picture of ISCAR FCP 1024 IC908 1.024" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1024 IC908 1.024" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1024 IC908

$157.99
Picture of ISCAR ICK 0906-2M IC908 .906" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0906-2M IC908 .906" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0906-2M IC908

$157.99
Picture of ISCAR ICK 0894-2M IC908 .894" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0894-2M IC908 .894" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0894-2M IC908

$157.99
Picture of ISCAR FCP 0984 IC908 .984" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 0984 IC908 .984" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 0984 IC908

$157.99
Picture of ISCAR ICK 0917-2M IC908 .917" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0917-2M IC908 .917" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0917-2M IC908

$157.99
Picture of ISCAR ICK 0921-2M IC908 .921" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0921-2M IC908 .921" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0921-2M IC908

$157.99
Picture of ISCAR FCP 1004 IC908 1.004" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISCAR FCP 1004 IC908 1.004" Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)

ISO: FCP 1004 IC908

$157.99
Picture of ISCAR ICM 0992 IC908 .992" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0992 IC908 .992" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0992 IC908

$157.99
Picture of ISCAR ICK 0913-2M IC908 .913" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0913-2M IC908 .913" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0913-2M IC908

$157.99
Picture of ISCAR ICK 0898-2M IC908 .898" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0898-2M IC908 .898" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0898-2M IC908

$157.99
Picture of ISCAR ICK 0929-2M IC908 .929" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0929-2M IC908 .929" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0929-2M IC908

$157.99
Picture of ISCAR ICM 0965 IC908 .965" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0965 IC908 .965" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0965 IC908

$157.99
Picture of ISCAR ICK 0925-2M IC908 .925" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0925-2M IC908 .925" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0925-2M IC908

$157.99
Picture of ISCAR ICK 0902-2M IC908 .902" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0902-2M IC908 .902" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0902-2M IC908

$157.99
Picture of ISCAR ICM 0988 IC908 .988" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0988 IC908 .988" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0988 IC908

$157.99
Picture of ISCAR ICM 1012 IC908 1.012" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1012 IC908 1.012" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1012 IC908

$157.99
Picture of ISCAR ICM 0980 IC908 .980" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0980 IC908 .980" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0980 IC908

$157.99
Picture of ISCAR ICM 1000 IC908 1.000" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1000 IC908 1.000" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1000 IC908

$157.99
Picture of ISCAR ICM 0984 IC908 .984" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 0984 IC908 .984" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 0984 IC908

$157.99
Picture of ISCAR ICM 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISCAR ICM 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)

ISO: ICM 1004 IC908

$157.99
Picture of YG-1 G9D77160 DIA 16MM SH 0.6299 LOC 0.9449 OAL 3.9370 End Mill Carbide TiAlN Single End Corner Radius 0.0394 1.00MM X-SPEED End Mill

YG-1 G9D77160 DIA 16MM SH 0.6299 LOC 0.9449 OAL 3.9370 End Mill Carbide TiAlN Single End Corner Radius 0.0394 1.00MM X-SPEED End Mill

$157.96
Picture of IMCO 64023 DIA 12MM SH 0.4724 LOC 0.9449 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0591 1.50MM Pow-R-Path Mill

IMCO 64023 DIA 12MM SH 0.4724 LOC 0.9449 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0591 1.50MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4VN513005E DIA 1/2 SH 2.00 LOC 0.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill

HANITA/WIDIA TF4VN513005E DIA 1/2 SH 2.00 LOC 0.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4VN513005C DIA 1/2 SH 2.00 LOC 0.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0600 1.52MM VariMill

HANITA/WIDIA TF4VN513005C DIA 1/2 SH 2.00 LOC 0.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0600 1.52MM VariMill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA TF4VN516006E DIA 5/8 SH 2.00 LOC 0.7500 OAL 4.1250 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill

HANITA/WIDIA TF4VN516006E DIA 5/8 SH 2.00 LOC 0.7500 OAL 4.1250 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.1200 3.05MM VariMill

Call (262) 251-4020 for pricing
Picture of AWARD O-403-CB DIA 1/4 SH 0.50 LOC 0.7500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD O-403-CB DIA 1/4 SH 0.50 LOC 0.7500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 577C12005W DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0295 0.75MM VariMill II

HANITA/WIDIA 577C12005W DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0295 0.75MM VariMill II

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 577C12015T DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill II

HANITA/WIDIA 577C12015T DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill II

Call (262) 251-4020 for pricing
Picture of EMUGE CU51C400.5716 Tap 7/16-20.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P HSS HSSE GLT-1

EMUGE CU51C400.5716 Tap 7/16-20.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P HSS HSSE GLT-1

ISO: CU51C400.5716

$157.59
Picture of GORILLA MILL GMHTCB58F7 DIA 5/8" SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Square Sharp BABOON CHIMPBREAKER

GORILLA MILL GMHTCB58F7 DIA 5/8" SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Square Sharp BABOON CHIMPBREAKER

ISO: GMHTCB58F7

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 57N8120R5TN DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0984 2.50MM VariMill II

HANITA/WIDIA 57N8120R5TN DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0984 2.50MM VariMill II

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 57N8250R8TP DIA 25MM SH 0.9843 LOC 1.7717 OAL 5.3150 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM VariMill II

HANITA/WIDIA 57N8250R8TP DIA 25MM SH 0.9843 LOC 1.7717 OAL 5.3150 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM VariMill II

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 57N8120R5TP DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM VariMill II

HANITA/WIDIA 57N8120R5TP DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM VariMill II

Call (262) 251-4020 for pricing
Picture of INGERSOLL ER25T10SA-02 0.6 Screw ON ER STEEL T10 Replacable Head Acc. ER 25 Steel Single End CHIPSURFER

INGERSOLL ER25T10SA-02 0.6 Screw ON ER STEEL T10 Replacable Head Acc. ER 25 Steel Single End CHIPSURFER

$157.43
Picture of INGERSOLL ER32T05SA-10 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 32 Steel Single End CHIPSURFER

INGERSOLL ER32T05SA-10 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 32 Steel Single End CHIPSURFER

$157.43
Picture of INGERSOLL 46D-1075TURD02-P IN05S DIA 1 SH T15 LOC 1.00End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM CHIPSURFER

INGERSOLL 46D-1075TURD02-P IN05S DIA 1 SH T15 LOC 1.00End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM CHIPSURFER

$157.31
Picture of AWARD BKX-403-CB DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BKX-403-CB DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP194 AH725 0.7638" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP194 AH725 0.7638" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP194 AH725

Call (262) 251-4020 for pricing
Picture of AWARD BKK-405-CB DIA 1/4 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BKK-405-CB DIA 1/4 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP185 AH9130 0.7283" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP185 AH9130 0.7283" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP185 AH9130

Call (262) 251-4020 for pricing
Picture of AWARD BM2-0002-CBTIALN DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BM2-0002-CBTIALN DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BM3-0002-CB DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BM3-0002-CB DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP194 AH9130 0.7638" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP194 AH9130 0.7638" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP194 AH9130

Call (262) 251-4020 for pricing
Picture of AWARD BN-0004-CB DIA 1/32 SH 0.1875 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BN-0004-CB DIA 1/32 SH 0.1875 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP191 AH725 0.752" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP191 AH725 0.752" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP191 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP190 AH9130 0.748" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP190 AH9130 0.748" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP190 AH9130

Call (262) 251-4020 for pricing
Picture of AWARD BM3-0002-CBTIALN DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BM3-0002-CBTIALN DIA 1/32 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP186 AH725 0.7323" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP186 AH725 0.7323" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP186 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP181 AH725 0.7126" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP181 AH725 0.7126" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP181 AH725

Call (262) 251-4020 for pricing
Picture of AWARD BR-0004-CBTIALN DIA 1/32 SH 0.3750 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BR-0004-CBTIALN DIA 1/32 SH 0.3750 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP198 AH9130 0.7795" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP198 AH9130 0.7795" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP198 AH9130

Call (262) 251-4020 for pricing
Picture of AWARD BM2-0001-CBTIALN DIA 1/32 SH 0.1250 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BM2-0001-CBTIALN DIA 1/32 SH 0.1250 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP192 AH725 0.7559" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP192 AH725 0.7559" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP192 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP193 AH9130 0.7598" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP193 AH9130 0.7598" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP193 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP183 AH725 0.7205" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP183 AH725 0.7205" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP183 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP190 AH725 0.748" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP190 AH725 0.748" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP190 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP188 AH725 0.7401" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP188 AH725 0.7401" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP188 AH725

Call (262) 251-4020 for pricing
Picture of AWARD BKK-405-CBTIALN DIA 1/4 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BKK-405-CBTIALN DIA 1/4 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP187 AH725 0.7362" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP187 AH725 0.7362" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP187 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP182 AH725 0.7165" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP182 AH725 0.7165" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP182 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP193 AH725 0.7598" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP193 AH725 0.7598" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP193 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP196 AH725 0.7716" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP196 AH725 0.7716" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP196 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP184 AH725 0.7244" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP184 AH725 0.7244" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP184 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP197 AH725 0.7756" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP197 AH725 0.7756" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP197 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP195 AH725 0.7677" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP195 AH725 0.7677" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP195 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP185 AH725 0.7283" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP185 AH725 0.7283" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP185 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP189 AH725 0.7441" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP189 AH725 0.7441" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP189 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP199 AH725 0.7835" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP199 AH725 0.7835" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP199 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP1927 AH725 0.7587" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP1927 AH725 0.7587" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP1927 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP1905 AH725 3/4" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP1905 AH725 3/4" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP1905 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP198 AH725 0.7795" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP198 AH725 0.7795" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP198 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP195 AH9130 0.7677" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP195 AH9130 0.7677" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP195 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP1946 AH725 0.7661" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP1946 AH725 0.7661" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP1946 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP200 AH725 0.7874" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP200 AH725 0.7874" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP200 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP1984 AH725 0.7811" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP1984 AH725 0.7811" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP1984 AH725

Call (262) 251-4020 for pricing
Picture of YMW 389644TICN 3/8-18.00TPI Pipe Spiral Flute Pipe Cobalt M42 TiCN

YMW 389644TICN 3/8-18.00TPI Pipe Spiral Flute Pipe Cobalt M42 TiCN

Call (262) 251-4020 for pricing
Picture of AWARD M-805-COTIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD M-805-COTIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHTCB58F5 DIA 5/8" SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Square Sharp PHENOM CHIMPBREAKER

GORILLA MILL GMHTCB58F5 DIA 5/8" SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide TiAlN Single End Square Sharp PHENOM CHIMPBREAKER

ISO: GMHTCB58F5

Call (262) 251-4020 for pricing
Picture of YG-1 SV525360 3-15/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525360 3-15/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520346 3-23/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520346 3-23/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV520362 3-31/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520362 3-31/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV575980 98.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV575980 98.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525334 3-17/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525334 3-17/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525354 3-27/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525354 3-27/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520354 3-27/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520354 3-27/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV575960 96.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV575960 96.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525352 3-13/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525352 3-13/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520400 4.000 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520400 4.000 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV575940 94.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV575940 94.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525348 3-3/4 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525348 3-3/4 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520334 3-17/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520334 3-17/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV570920 92.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV570920 92.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV570900 90.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV570900 90.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV525336 3-9/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525336 3-9/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525358 3-29/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525358 3-29/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525342 3-21/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525342 3-21/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520342 3-21/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520342 3-21/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV520352 3-13/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520352 3-13/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV575900 90.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV575900 90.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV570940 94.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV570940 94.00MM Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV525356 3-7/8 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525356 3-7/8 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520338 3-19/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520338 3-19/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV520356 3-7/8 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520356 3-7/8 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23
Picture of YG-1 SV525350 3-25/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525350 3-25/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV525338 3-19/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

YG-1 SV525338 3-19/32 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert H-Coated

$157.23
Picture of YG-1 SV520344 3-11/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

YG-1 SV520344 3-11/16 Premium Cobalt (M48) SV-Point Throw Away Spade Drill Insert HARDSLICK Coated

$157.23