Solid Rounds

Sort by
Picture of HAM TFR292-1340 TA-C 13.40mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1340 TA-C 13.40mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1330 TA-C 13.30mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1330 TA-C 13.30mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1320 TA-C 13.20mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1320 TA-C 13.20mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1310 TA-C 33/64" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1310 TA-C 33/64" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1300 TA-C 13.00mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1300 TA-C 13.00mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1290 TA-C 12.90mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1290 TA-C 12.90mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1280 TA-C 12.80mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1280 TA-C 12.80mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1275 TA-C 12.75mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1275 TA-C 12.75mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1270 TA-C 1/2" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1270 TA-C 1/2" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1260 TA-C 12.60mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1260 TA-C 12.60mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1250 TA-C 12.50mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1250 TA-C 12.50mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1240 TA-C 12.40mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1240 TA-C 12.40mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1230 TA-C 31/64" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1230 TA-C 31/64" 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1225 TA-C 12.25mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1225 TA-C 12.25mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1220 TA-C 12.20mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1220 TA-C 12.20mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR292-1210 TA-C 12.10mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

HAM TFR292-1210 TA-C 12.10mm 8XD Solid Carbide Super Drill , 2 Flutes, TA-C Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1440 TA-CN 14.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1440 TA-CN 14.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1430 TA-CN 14.30mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1430 TA-CN 14.30mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1429 TA-CN 9/16" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1429 TA-CN 9/16" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1425 TA-CN 14.25mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1425 TA-CN 14.25mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1420 TA-CN 14.20mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1420 TA-CN 14.20mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1410 TA-CN 14.10mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1410 TA-CN 14.10mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1400 TA-CN 14.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1400 TA-CN 14.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1390 TA-CN 13.90mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1390 TA-CN 13.90mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1389 TA-CN 35/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1389 TA-CN 35/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1380 TA-CN 13.80mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1380 TA-CN 13.80mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1370 TA-CN 13.70mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1370 TA-CN 13.70mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1360 TA-CN 13.60mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru ..

HAM TFR271-1360 TA-CN 13.60mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru ..

$240.06
Picture of HAM TFR271-1350 TA-CN 13.50mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1350 TA-CN 13.50mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1349 TA-CN 17/32" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1349 TA-CN 17/32" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1340 TA-CN 13.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1340 TA-CN 13.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1330 TA-CN 13.30mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1330 TA-CN 13.30mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1310 TA-CN 33/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1310 TA-CN 33/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1300 TA-CN 13.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1300 TA-CN 13.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1290 TA-CN 12.90mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1290 TA-CN 12.90mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1280 TA-CN 12.80mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1280 TA-CN 12.80mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1275 TA-CN 12.75mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1275 TA-CN 12.75mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1271 TA-CN 1/2" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1271 TA-CN 1/2" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1260 TA-CN 12.60mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1260 TA-CN 12.60mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1250 TA-CN 12.50mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1250 TA-CN 12.50mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1240 TA-CN 12.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1240 TA-CN 12.40mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1230 TA-CN 31/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1230 TA-CN 31/64" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1225 TA-CN 12.25mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1225 TA-CN 12.25mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1220 TA-CN 12.20mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1220 TA-CN 12.20mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1210 TA-CN 12.10mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1210 TA-CN 12.10mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1200 TA-CN 12.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1200 TA-CN 12.00mm 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of HAM TFR271-1191 TA-CN 15/32" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

HAM TFR271-1191 TA-CN 15/32" 8XD Solid Carbide Niro Drill , 2 Flutes, TA-CN Coated, Coolant Thru

$240.06
Picture of AWARD N-820-COTIN DIA 1/2 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD N-820-COTIN DIA 1/2 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$239.99
Picture of AWARD BN-820-CO DIA 1/2 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BN-820-CO DIA 1/2 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$239.99
Picture of SWIFTCARB XM07505EI007RMCM DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

SWIFTCARB XM07505EI007RMCM DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

$239.95
Picture of SWIFTCARB XM07505EI007RLCM DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

SWIFTCARB XM07505EI007RLCM DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

$239.95
Picture of SWIFTCARB XT07505F8009TCCM DIA 3/4 SH 0.7500 LOC 1.8750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XT07505F8009TCCM DIA 3/4 SH 0.7500 LOC 1.8750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.92
Picture of SWIFTCARB AV08753EW009TCC0 DIA 7/8 SH 0.8750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AV08753EW009TCC0 DIA 7/8 SH 0.8750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

$239.89
Picture of IMCO 68067 DIA 20MM SH 0.7874 LOC 2.5591 OAL 4.9213 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Feed Mill

IMCO 68067 DIA 20MM SH 0.7874 LOC 2.5591 OAL 4.9213 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Feed Mill

$239.89
Picture of EMUGE C0513500.0124 Tap M24-3.00MM Bottoming Metric DIN/DIN 1.5P-2.0P HSSE

EMUGE C0513500.0124 Tap M24-3.00MM Bottoming Metric DIN/DIN 1.5P-2.0P HSSE

ISO: C0513500.0124

$239.89
Picture of EMUGE C0503500.0124 Tap Mod Bottom M24-3.00MM 6H Metric DIN/DIN HSSE

EMUGE C0503500.0124 Tap Mod Bottom M24-3.00MM 6H Metric DIN/DIN HSSE

ISO: C0503500.0124

$239.89
Picture of SWIFTCARB XD06254HY00ETC0M DIA 5/8 SH 0.6250 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD06254HY00ETC0M DIA 5/8 SH 0.6250 LOC 3.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.88
Picture of YG-1 34600TE DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 34600TE DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$239.87
Picture of SWIFTCARB AC07502J400IRN00 DIA 3/4 SH 0.7500 LOC 3.50 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

SWIFTCARB AC07502J400IRN00 DIA 3/4 SH 0.7500 LOC 3.50 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

$239.87
Picture of IMCO 67365 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

IMCO 67365 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

$239.87
Picture of AWARD BL-813-CBTIALN DIA 1/2 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

AWARD BL-813-CBTIALN DIA 1/2 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Ball Nose

$239.87
Picture of SWIFTCARB XT06257CIGGCTC0M DIA 5/8 SH 0.6250 LOC 0.9370 OAL 4.6250 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XT06257CIGGCTC0M DIA 5/8 SH 0.6250 LOC 0.9370 OAL 4.6250 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.81
Picture of HARVEY Tool 16215-C3 5/8 DIA x 60 DEG Carbide DASC, AlTiN Chamfer Mill Carbide AlTiN Single End Cham Mill

HARVEY Tool 16215-C3 5/8 DIA x 60 DEG Carbide DASC, AlTiN Chamfer Mill Carbide AlTiN Single End Cham Mill

$239.80
Picture of SWIFTCARB XT07505D4FK9TC0M DIA 3/4 SH 0.7500 LOC 1.1250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XT07505D4FK9TC0M DIA 3/4 SH 0.7500 LOC 1.1250 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.77
Picture of SWIFTCARB XD06254G600BTCCM DIA 5/8 SH 0.6250 LOC 2.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD06254G600BTCCM DIA 5/8 SH 0.6250 LOC 2.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.77
Picture of EMUGE 2523A.016 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2523A.016 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$239.76
Picture of EMUGE 2522A.016 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2522A.016 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$239.76
Picture of SWIFTCARB AF07504CS005RVC0 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

SWIFTCARB AF07504CS005RVC0 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

$239.69
Picture of SWIFTCARB AC07503II00IRV00 DIA 3/4 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

SWIFTCARB AC07503II00IRV00 DIA 3/4 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

$239.65
Picture of SWIFTCARB AC07503II00IRS00 DIA 3/4 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1970 5.00MM

SWIFTCARB AC07503II00IRS00 DIA 3/4 SH 0.7500 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1970 5.00MM

$239.65
Picture of SWIFTCARB AF06255FK009RVC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

SWIFTCARB AF06255FK009RVC0 DIA 5/8 SH 0.6250 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

$239.63
Picture of EMUGE CW553700.5016 Tap 3/4-10.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiN

EMUGE CW553700.5016 Tap 3/4-10.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiN

ISO: CW553700.5016

$239.63
Picture of EMUGE C1959401.0120 Tap Mod Bottom M20-2.50MM 6H Metric DIN/DIN Coolant HSSE TiCN

EMUGE C1959401.0120 Tap Mod Bottom M20-2.50MM 6H Metric DIN/DIN Coolant HSSE TiCN

ISO: C1959401.0120

$239.63
Picture of EMUGE AW193100.5767 Tap 1/2-14.00TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE TiN

EMUGE AW193100.5767 Tap 1/2-14.00TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE TiN

ISO: AW193100.5767

$239.63
Picture of PCT AXC512700T6 Deep Hole Coolant Thru 135° ZrCN 0.500 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

PCT AXC512700T6 Deep Hole Coolant Thru 135° ZrCN 0.500 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

$239.62
Picture of PCT AXC512600T6 Deep Hole Coolant Thru 135° ZrCN 0.496 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

PCT AXC512600T6 Deep Hole Coolant Thru 135° ZrCN 0.496 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

$239.62
Picture of PCT AXC512500T6 Deep Hole Coolant Thru 135° ZrCN 0.492 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

PCT AXC512500T6 Deep Hole Coolant Thru 135° ZrCN 0.492 Diameter Cylindrical 0.551 Shank 4.881 OAL 2 Flute 3.031 Flute Length 5.0XD

$239.62
Picture of SWIFTCARB XM07505CS005RVCM DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

SWIFTCARB XM07505CS005RVCM DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

$239.60
Picture of AWARD KX-1013-CBTIALN DIA 5/8 SH 0.8750 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD KX-1013-CBTIALN DIA 5/8 SH 0.8750 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$239.60
Picture of AWARD K-1213-CBTIALN DIA 3/4 SH 0.8750 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD K-1213-CBTIALN DIA 3/4 SH 0.8750 LOC 3.2500 OAL 6.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$239.60
Picture of AWARD BR-212-CB DIA 1/8 SH 0.8750 LOC 3.00 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

AWARD BR-212-CB DIA 1/8 SH 0.8750 LOC 3.00 OAL 5.00 End Mill Taper Flute Carbide Uncoated Single End Ball Nose

$239.60
Picture of SWIFTCARB XD07504BU005TCCM DIA 3/4 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD07504BU005TCCM DIA 3/4 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.55
Picture of M.A. FORD 20467190T Carbide Drill Solid Carbide 118° 0.671 Dia 0.671 Shank 5.500 OAL 2 Flute 3.625 Flute Length Carbide TiN

M.A. FORD 20467190T Carbide Drill Solid Carbide 118° 0.671 Dia 0.671 Shank 5.500 OAL 2 Flute 3.625 Flute Length Carbide TiN

ISO: 20467190T

$239.48
Picture of YG-1 UGMG53934 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose V7 Plus A

YG-1 UGMG53934 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose V7 Plus A

$239.47
Picture of SWIFTCARB XD07504GS00ETC0M DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD07504GS00ETC0M DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$239.45
Picture of SWIFTCARB XM07507HC00ES00M DIA 3/4 SH 0.7500 LOC 2.7500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM07507HC00ES00M DIA 3/4 SH 0.7500 LOC 2.7500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

$239.43
Picture of SWIFTCARB XM06255JQ00IS00M DIA 5/8 SH 0.6250 LOC 3.7500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM06255JQ00IS00M DIA 5/8 SH 0.6250 LOC 3.7500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

$239.43
Picture of GORILLA MILL GM34FSL5 DIA 3/4" SH 0.7500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GM34FSL5 DIA 3/4" SH 0.7500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GM34FSL5

$239.37
Picture of GORILLA MILL GM34FSL4 DIA 3/4" SH 0.7500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

GORILLA MILL GM34FSL4 DIA 3/4" SH 0.7500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp

ISO: GM34FSL4

$239.37
Picture of YG-1 EMB39250 DIA 25MM SH 0.9843 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

YG-1 EMB39250 DIA 25MM SH 0.9843 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

$239.36
Picture of YG-1 EMB37064 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

YG-1 EMB37064 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

$239.36
Picture of SWIFTCARB XM07505GS00BRN0M DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

SWIFTCARB XM07505GS00BRN0M DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

$239.36
Picture of IMCO 64321 DIA 5/8 SH 0.6250 LOC 1.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 64321 DIA 5/8 SH 0.6250 LOC 1.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

$239.36
Picture of EMUGE 2888RZ.010 DIA 10MM SH 0.3937 LOC 0.5118 OAL 2.8346 End Mill Carbide CrN Single End Square Sharp Alu-Cut

EMUGE 2888RZ.010 DIA 10MM SH 0.3937 LOC 0.5118 OAL 2.8346 End Mill Carbide CrN Single End Square Sharp Alu-Cut

$239.35
Picture of YG-1 EMD60064 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

YG-1 EMD60064 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

$239.33
Picture of YG-1 EMD57064 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

YG-1 EMD57064 DIA 1 SH 1.00 LOC 1.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp V7 Mill

$239.33
Picture of M.A. FORD 177787012A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2362 6.00MM TuffCut® XR

M.A. FORD 177787012A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2362 6.00MM TuffCut® XR

$239.33
Picture of M.A. FORD 17778704A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0591 1.50MM TuffCut® XR

M.A. FORD 17778704A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0591 1.50MM TuffCut® XR

$239.33
Picture of M.A. FORD 177787011A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1969 5.00MM TuffCut® XR

M.A. FORD 177787011A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1969 5.00MM TuffCut® XR

$239.33
Picture of M.A. FORD 17778709A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1575 4.00MM TuffCut® XR

M.A. FORD 17778709A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1575 4.00MM TuffCut® XR

$239.33
Picture of M.A. FORD 17778707A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM TuffCut® XR

M.A. FORD 17778707A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1181 3.00MM TuffCut® XR

$239.33
Picture of M.A. FORD 17778705A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0787 2.00MM TuffCut® XR

M.A. FORD 17778705A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0787 2.00MM TuffCut® XR

$239.33
Picture of M.A. FORD 17878703A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 1.0000 25.40MM TuffCut® XR

M.A. FORD 17878703A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 1.0000 25.40MM TuffCut® XR

$239.33
Picture of M.A. FORD 17778703A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 1.0000 25.40MM TuffCut® XR

M.A. FORD 17778703A DIA 20MM SH 0.7874 LOC 1.4961 OAL 4.0945 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 1.0000 25.40MM TuffCut® XR

$239.33
Picture of HARVEY Tool 24032 1/2 DIA x 8 OAL Carbide EM, 4 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 24032 1/2 DIA x 8 OAL Carbide EM, 4 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$239.30
Picture of SWIFTCARB AC10002DGFKBRM00 DIA 1 SH 1.00 LOC 1.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AC10002DGFKBRM00 DIA 1 SH 1.00 LOC 1.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

$239.29
Picture of SWIFTCARB AC10002DGFKBRL00 DIA 1 SH 1.00 LOC 1.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AC10002DGFKBRL00 DIA 1 SH 1.00 LOC 1.2500 OAL 4.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

$239.29
Picture of YG-1 05228HE DIA 2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

YG-1 05228HE DIA 2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

$239.28
Picture of YG-1 G93048 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

YG-1 G93048 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

$239.24
Picture of YG-1 G90948 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

YG-1 G90948 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.50 End Mill Carbide TiAlN Single End Corner Radius 0.0400 1.02MM X-SPEED End Mill

$239.24
Picture of YMW SSU18Y6NEB 1-1/8-7.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

YMW SSU18Y6NEB 1-1/8-7.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

$239.21
Picture of YMW SSU18Y4NEB 1-1/8-7.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

YMW SSU18Y4NEB 1-1/8-7.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

$239.21
Picture of YMW SSU18S5NEB 1-1/8-12.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

YMW SSU18S5NEB 1-1/8-12.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

$239.21
Picture of YMW SSU18S4NEB 1-1/8-12.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

YMW SSU18S4NEB 1-1/8-12.00TPI Cut Spiral Point Plug 2.5P HSS Uncoated

$239.21
Picture of SWIFTCARB AF07505CS005RQC0 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

SWIFTCARB AF07505CS005RQC0 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

$239.17
Picture of YG-1 99670 DIA 5/8 SH 0.6250 LOC 2.6250 OAL 5.1250 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp X-Power

YG-1 99670 DIA 5/8 SH 0.6250 LOC 2.6250 OAL 5.1250 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp X-Power

$239.15
Picture of SWIFTCARB AF05004II00IRMC0 DIA 1/2 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AF05004II00IRMC0 DIA 1/2 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

$239.13
Picture of SWIFTCARB AF05004II00IRLC0 DIA 1/2 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AF05004II00IRLC0 DIA 1/2 SH 0.50 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

$239.13
Picture of EMUGE GF253706.0050 Carbide Thread Mill M5 x1.00MM Carbide TICN

EMUGE GF253706.0050 Carbide Thread Mill M5 x1.00MM Carbide TICN

$239.13
Picture of AWARD BZ-406-CO DIA 1/4 SH 1.00 LOC 1.50 OAL 4.1250 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BZ-406-CO DIA 1/4 SH 1.00 LOC 1.50 OAL 4.1250 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

$239.10
Picture of IMCO 67369 DIA 3/4 SH 0.7500 LOC 2.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

IMCO 67369 DIA 3/4 SH 0.7500 LOC 2.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

$239.09
Picture of IMCO 67368 DIA 3/4 SH 0.7500 LOC 2.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

IMCO 67368 DIA 3/4 SH 0.7500 LOC 2.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

$239.09
Picture of WIDIN SF520080 8.00MM DIA 140° Point 2 Flute 20XD Drill

WIDIN SF520080 8.00MM DIA 140° Point 2 Flute 20XD Drill

$239.07
Picture of WIDIN SF520079 7.90MM DIA 140° Point 2 Flute 20XD Drill

WIDIN SF520079 7.90MM DIA 140° Point 2 Flute 20XD Drill

$239.07
Picture of WIDIN SF520078 7.80MM DIA 140° Point 2 Flute 20XD Drill

WIDIN SF520078 7.80MM DIA 140° Point 2 Flute 20XD Drill

$239.07
Picture of WIDIN SF520077 7.70MM DIA 140° Point 2 Flute 20XD Drill

WIDIN SF520077 7.70MM DIA 140° Point 2 Flute 20XD Drill

$239.07
Picture of WIDIN SF520076 7.60MM DIA 140° Point 2 Flute 20XD Drill

WIDIN SF520076 7.60MM DIA 140° Point 2 Flute 20XD Drill

$239.07
Picture of M.A. FORD 27875027B DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM TuffCut® XT

M.A. FORD 27875027B DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM TuffCut® XT

$238.99
Picture of WIDIN ZE506200 DIA 20MM SH 0.7874 LOC 1.7323 OAL 3.9370 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZE506200 DIA 20MM SH 0.7874 LOC 1.7323 OAL 3.9370 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

$238.97
Picture of SWIFTCARB XM07509CS005RM0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

SWIFTCARB XM07509CS005RM0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

$238.96
Picture of SWIFTCARB XM07509CS005RL0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

SWIFTCARB XM07509CS005RL0M DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

$238.96
Picture of EMUGE 2643TZ.016030 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.1181 3.00MM TiNox-Cut

EMUGE 2643TZ.016030 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.1181 3.00MM TiNox-Cut

$238.93
Picture of EMUGE 2643TZ.016025 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.0984 2.50MM TiNox-Cut

EMUGE 2643TZ.016025 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.0984 2.50MM TiNox-Cut

$238.93
Picture of EMUGE 2642TZ.016030 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.1181 3.00MM TiNox-Cut

EMUGE 2642TZ.016030 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.1181 3.00MM TiNox-Cut

$238.93
Picture of EMUGE 2642TZ.016025 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.0984 2.50MM TiNox-Cut

EMUGE 2642TZ.016025 DIA 16MM SH 0.6299 LOC 0.8661 OAL 3.2283 End Mill Standard Flute High Helix Carbide TiN + TiAIN Single End Corner Radius 0.0984 2.50MM TiNox-Cut

$238.93
Picture of SWIFTCARB AC10003CS005RM00 DIA 1 SH 1.00 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AC10003CS005RM00 DIA 1 SH 1.00 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

$238.92
Picture of SWIFTCARB AC10003CS005RL00 DIA 1 SH 1.00 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AC10003CS005RL00 DIA 1 SH 1.00 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

$238.92
Picture of HARVEY Tool 32812-C3 3/16 R Carbide CONCAVE EM, AlTiN End Mill Carbide AlTiN Single End Concave0.1875 4.76MM

HARVEY Tool 32812-C3 3/16 R Carbide CONCAVE EM, AlTiN End Mill Carbide AlTiN Single End Concave0.1875 4.76MM

$238.90
Picture of WIDIA/KENNAMETAL VDS402A14000 SC Drill 14MM/.5512/ 5XD

WIDIA/KENNAMETAL VDS402A14000 SC Drill 14MM/.5512/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13900 SC Drill 13,9MM/.5472/ 5XD

WIDIA/KENNAMETAL VDS402A13900 SC Drill 13,9MM/.5472/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13891 SC Drill 13,891MM/.5469/ 5XD

WIDIA/KENNAMETAL VDS402A13891 SC Drill 13,891MM/.5469/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13800 SC Drill 13,8MM/.5433/ 5XD

WIDIA/KENNAMETAL VDS402A13800 SC Drill 13,8MM/.5433/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13700 SC Drill 13,7MM/.5394/ 5XD

WIDIA/KENNAMETAL VDS402A13700 SC Drill 13,7MM/.5394/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13600 SC Drill 13,6MM/.5354/ 5XD

WIDIA/KENNAMETAL VDS402A13600 SC Drill 13,6MM/.5354/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13500 SC Drill 13,5MM/.5315/ 5XD

WIDIA/KENNAMETAL VDS402A13500 SC Drill 13,5MM/.5315/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13400 SC Drill 13,4MM/.5276/ 5XD

WIDIA/KENNAMETAL VDS402A13400 SC Drill 13,4MM/.5276/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13300 SC Drill 13,3MM/.5236/ 5XD

WIDIA/KENNAMETAL VDS402A13300 SC Drill 13,3MM/.5236/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13200 SC Drill 13,2MM/.5197/ 5XD

WIDIA/KENNAMETAL VDS402A13200 SC Drill 13,2MM/.5197/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13100 SC Drill 13,1MM/.5157/ 5XD

WIDIA/KENNAMETAL VDS402A13100 SC Drill 13,1MM/.5157/ 5XD

$238.88
Picture of WIDIA/KENNAMETAL VDS402A13096 SC Drill 13,096MM/.5156/ 5XD

WIDIA/KENNAMETAL VDS402A13096 SC Drill 13,096MM/.5156/ 5XD

$238.88
Picture of EMUGE 2527A.016 DIA 16MM SH 0.6299 LOC 1.8898 OAL 4.4094 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2527A.016 DIA 16MM SH 0.6299 LOC 1.8898 OAL 4.4094 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$238.86
Picture of EMUGE 2526A.016 DIA 16MM SH 0.6299 LOC 1.8898 OAL 4.4094 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2526A.016 DIA 16MM SH 0.6299 LOC 1.8898 OAL 4.4094 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$238.86
Picture of WIDIN WF614200 DIA 20MM SH 0.7874 LOC 1.9685 OAL 3.9370 End Mill Carbide AlTiN Single End Square Sharp WINNER

WIDIN WF614200 DIA 20MM SH 0.7874 LOC 1.9685 OAL 3.9370 End Mill Carbide AlTiN Single End Square Sharp WINNER

$238.84
Picture of SWIFTCARB AC10002HY00IS100 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

SWIFTCARB AC10002HY00IS100 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

$238.84
Picture of EMUGE TA514524.0950 Carbide Drill Coolant Thru Carbide 140° 0.374 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0950 Carbide Drill Coolant Thru Carbide 140° 0.374 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0950

$238.80
Picture of EMUGE TA514524.0940 Carbide Drill Coolant Thru Carbide 140° 0.370 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0940 Carbide Drill Coolant Thru Carbide 140° 0.370 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0940

$238.80
Picture of EMUGE TA514524.0935 Carbide Drill Coolant Thru Carbide 140° 0.368 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0935 Carbide Drill Coolant Thru Carbide 140° 0.368 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0935

$238.80
Picture of EMUGE TA514524.0930 Carbide Drill Coolant Thru Carbide 140° 0.366 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0930 Carbide Drill Coolant Thru Carbide 140° 0.366 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0930

$238.80
Picture of EMUGE TA514524.0900 Carbide Drill Coolant Thru Carbide 140° 0.354 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0900 Carbide Drill Coolant Thru Carbide 140° 0.354 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0900

$238.80
Picture of EMUGE TA514524.0890 Carbide Drill Coolant Thru Carbide 140° 0.350 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0890 Carbide Drill Coolant Thru Carbide 140° 0.350 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0890

$238.80
Picture of EMUGE TA514524.0880 Carbide Drill Coolant Thru Carbide 140° 0.346 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0880 Carbide Drill Coolant Thru Carbide 140° 0.346 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0880

$238.80
Picture of EMUGE TA514524.0870 Carbide Drill Coolant Thru Carbide 140° 0.342 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

EMUGE TA514524.0870 Carbide Drill Coolant Thru Carbide 140° 0.342 Diameter 0.393 Shank 4.055 OAL 2.402 Flute 2 Flute AlCrN

ISO: TA514524.0870

$238.80
Picture of EMUGE CW181000.5788 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE

EMUGE CW181000.5788 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE

ISO: CW181000.5788

$238.78
Picture of EMUGE CW181000.5769 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE

EMUGE CW181000.5769 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT DINSI 2.0P-3.0P Carbide HSSE

ISO: CW181000.5769

$238.78
Picture of EMUGE AW181000.5788 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE

EMUGE AW181000.5788 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE

ISO: AW181000.5788

$238.78
Picture of EMUGE AW181000.5769 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE

EMUGE AW181000.5769 Tap 1-11.50TPI Pipe NPT/NPTF/ANPT ANSI/ANSI 2.0P-3.0P Carbide HSSE

ISO: AW181000.5769

$238.78
Picture of SWIFTCARB AC06252BUQ0PRM00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 8.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AC06252BUQ0PRM00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 8.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

$238.75
Picture of SWIFTCARB AC06252BUQ0PRL00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 8.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AC06252BUQ0PRL00 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 8.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

$238.75
Picture of MELIN 45082 DIA 1-3/8 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Square Sharp

MELIN 45082 DIA 1-3/8 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Square Sharp

$238.73
Picture of M.A. FORD 27862549B DIA 5/8 SH 0.6250 LOC 2.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1900 4.83MM TuffCut® XT

M.A. FORD 27862549B DIA 5/8 SH 0.6250 LOC 2.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1900 4.83MM TuffCut® XT

$238.72
Picture of GORILLA MILL GD6250X5 Carbide Drill 0.6250 15.88MM - 5/8 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

GORILLA MILL GD6250X5 Carbide Drill 0.6250 15.88MM - 5/8 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

ISO: GD6250X5

$238.72
Picture of GORILLA MILL GD5938X5 Carbide Drill 0.5938 15.08MM - 19/32 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

GORILLA MILL GD5938X5 Carbide Drill 0.5938 15.08MM - 19/32 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

ISO: GD5938X5

$238.72
Picture of GORILLA MILL GD5625X5 Carbide Drill 0.5625 14.29MM - 9/16 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

GORILLA MILL GD5625X5 Carbide Drill 0.5625 14.29MM - 9/16 Dia Cylindrical Shank0.6250 TiAlN Solid 140°

ISO: GD5625X5

$238.72
Picture of TUNGALOY DSXU4063F03 0.4063" GigaJetDrill series with Coolant hole, L/D=3

TUNGALOY DSXU4063F03 0.4063" GigaJetDrill series with Coolant hole, L/D=3

ISO: DSXU4063F03

$238.65
Picture of TUNGALOY DSX1050F03 10.5 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

TUNGALOY DSX1050F03 10.5 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

ISO: DSX1050F03

$238.65
Picture of TUNGALOY DSX1030F03 10.3 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

TUNGALOY DSX1030F03 10.3 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

ISO: DSX1030F03

$238.65
Picture of TUNGALOY DSX0650F08 6.5 mm GigaJetDrill series with Coolant hole, L/D=8, dia=3.0 - 16.0mm

TUNGALOY DSX0650F08 6.5 mm GigaJetDrill series with Coolant hole, L/D=8, dia=3.0 - 16.0mm

ISO: DSX0650F08

$238.65
Picture of SWIFTCARB XT06255A6KKITC0M DIA 5/8 SH 0.6250 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XT06255A6KKITC0M DIA 5/8 SH 0.6250 LOC 0.6250 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

$238.65
Picture of SWIFTCARB XM06255GS00BRMCM DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

SWIFTCARB XM06255GS00BRMCM DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

$238.64
Picture of SWIFTCARB XM06255GS00BRLCM DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

SWIFTCARB XM06255GS00BRLCM DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1200 3.05MM

$238.64
Picture of WIDIN ZR304A064250X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM General Purpose

WIDIN ZR304A064250X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM General Purpose

$238.60
Picture of WIDIN ZR304A064125X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM General Purpose

WIDIN ZR304A064125X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM General Purpose

$238.60
Picture of WIDIN ZR304A064090X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM General Purpose

WIDIN ZR304A064090X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM General Purpose

$238.60
Picture of WIDIN ZR304A064060X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM General Purpose

WIDIN ZR304A064060X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM General Purpose

$238.60
Picture of WIDIN ZR304A064030X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM General Purpose

WIDIN ZR304A064030X DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM General Purpose

$238.60
Picture of SWIFTCARB AV06253A6MMLTC00 DIA 5/8 SH 0.6250 LOC 0.6250 OAL 7.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AV06253A6MMLTC00 DIA 5/8 SH 0.6250 LOC 0.6250 OAL 7.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

$238.59
Picture of SWIFTCARB AF06254G600ERMC0 DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AF06254G600ERMC0 DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

$238.57
Picture of SWIFTCARB AF06254G600ERLC0 DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AF06254G600ERLC0 DIA 5/8 SH 0.6250 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

$238.57
Picture of M.A. FORD 278X62504B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM TuffCut® XT

M.A. FORD 278X62504B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM TuffCut® XT

$238.55
Picture of M.A. FORD 278X62502B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM TuffCut® XT

M.A. FORD 278X62502B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM TuffCut® XT

$238.55
Picture of M.A. FORD 277X6256B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM TuffCut® XT

M.A. FORD 277X6256B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM TuffCut® XT

$238.55
Picture of M.A. FORD 277X6254B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM TuffCut® XT

M.A. FORD 277X6254B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM TuffCut® XT

$238.55
Picture of M.A. FORD 277X6252B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM TuffCut® XT

M.A. FORD 277X6252B DIA 5/8 SH 0.6250 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM TuffCut® XT

$238.55
Picture of AWARD M-1224-CO DIA 3/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD M-1224-CO DIA 3/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$238.49
Picture of SWIFTCARB XT037576WI8ET6CM DIA 3/8 SH 0.3750 LOC 0.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

SWIFTCARB XT037576WI8ET6CM DIA 3/8 SH 0.3750 LOC 0.3750 OAL 5.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

$238.48
Picture of GORILLA MILL GMACB34FLH3ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Carbide ZrN Single End Square Sharp SILVERBack CHIMPBREAKER

GORILLA MILL GMACB34FLH3ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Carbide ZrN Single End Square Sharp SILVERBack CHIMPBREAKER

ISO: GMACB34FLH3ZrN

$238.46
Picture of GORILLA MILL GMA34RLH3120ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM SILVERBack

GORILLA MILL GMA34RLH3120ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM SILVERBack

ISO: GMA34RLH3120ZrN

$238.44
Picture of GORILLA MILL GMA34RLH3090ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM SILVERBack

GORILLA MILL GMA34RLH3090ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM SILVERBack

ISO: GMA34RLH3090ZrN

$238.44
Picture of GORILLA MILL GMA34RLH3060ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM SILVERBack

GORILLA MILL GMA34RLH3060ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM SILVERBack

ISO: GMA34RLH3060ZrN

$238.44
Picture of GORILLA MILL GMA34RLH3030ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM SILVERBack

GORILLA MILL GMA34RLH3030ZrN DIA 3/4" SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM SILVERBack

ISO: GMA34RLH3030ZrN

$238.44