ANSI: WNMA433 YG3010
ISO: WNMA80412 YG3010
Share This:
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Carbide Insert Cvd-Ticn+Al2o3 Coated For Interrupted & Roughing Steel & Cast Iron Ur Chip Breaker For Heavy Roughing And Interrupted Turning Applications. Yg3010 Is A Cvd-Ticn+Al2o3 Gold & Black Coated Grade For Steel Finishing And Grey Cast Iron Turning. Sub-Micron Grain Carbide For High Wear Resistance With A Special Surface Treatment On The Top Face Of The Insert For Higher Cutting Speeds, Smoother Chip Flow And Longer Insert Life. 1St Choice Grade For Light Continuous Machining Of Non-Alloyed Steels, Low Carbon Steels, Medium Carbon Steels And Ductile Cast Iron.
