ANSI: XDET16M540FRALP WN10HM
ISO: XDET16M540FRALP WN10HM
Share This:
Super-positive ALP insert geometry. Polished rake face to reduce build up edge. Sharp edge preparation "FRALP" for roughing and finishing applications. Honed edge preparation "ERALP" for heavy roughing applications.
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
High hardness for excelent abrasive wear resistance, first choice for precision drill and non ferrous applications
