Sharp

Sort by
Picture of HARVEY Tool 34675 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34675 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34670 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34670 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34665 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34665 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34662 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34662 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34660 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34660 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34655 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34655 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34650 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34650 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34647 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34647 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of HARVEY Tool 34645 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34645 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.50
Picture of MELIN 11221 DIA 3/8 SH 0.3750 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp

MELIN 11221 DIA 3/8 SH 0.3750 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp

$38.49
Picture of WIDIN ZA304028L DIA 7/16 SH 0.4375 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

WIDIN ZA304028L DIA 7/16 SH 0.4375 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

$38.47
Picture of WIDIN ZA302028L DIA 7/16 SH 0.4375 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

WIDIN ZA302028L DIA 7/16 SH 0.4375 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

$38.47
Picture of AWARD O-103-CBTIALN DIA 3/32 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD O-103-CBTIALN DIA 3/32 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.47
Picture of AWARD M5-052-CBTIALN DIA 5/64 SH 0.1875 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD M5-052-CBTIALN DIA 5/64 SH 0.1875 LOC 0.50 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.47
Picture of AWARD O-406-COTIN DIA 1/4 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD O-406-COTIN DIA 1/4 SH 0.50 LOC 1.50 OAL 3.50 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$38.47
Picture of MELIN H0127 DIA 1/8 SH 0.1250 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0127 DIA 1/8 SH 0.1250 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.45
Picture of WIDIN SM504060 DIA 6MM SH 0.2362 LOC 0.5118 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Z-SUS-MATE

WIDIN SM504060 DIA 6MM SH 0.2362 LOC 0.5118 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Z-SUS-MATE

$38.44
Picture of WIDIN SM504050 DIA 5MM SH 0.2362 LOC 0.5118 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Z-SUS-MATE

WIDIN SM504050 DIA 5MM SH 0.2362 LOC 0.5118 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Z-SUS-MATE

$38.44
Picture of IMCO 61247 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.5984 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

IMCO 61247 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.5984 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

$38.44
Picture of WIDIN WGME502A015018 DIA 0.015 SH 0.1250 LOC 0.0180 OAL 1.5748 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

WIDIN WGME502A015018 DIA 0.015 SH 0.1250 LOC 0.0180 OAL 1.5748 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

$38.43
Picture of WIDIN WGME502A010003 DIA 0.25MM SH 0.1250 LOC 0.0060 OAL 1.574 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

WIDIN WGME502A010003 DIA 0.25MM SH 0.1250 LOC 0.0060 OAL 1.574 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

$38.43
Picture of WIDIN WGME502A005003 DIA 0.13MM SH 0.1250 LOC 0.0030 OAL 1.574 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

WIDIN WGME502A005003 DIA 0.13MM SH 0.1250 LOC 0.0030 OAL 1.574 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp GRA-MATE

$38.43
Picture of IMCO 31004 DIA 23/64 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

IMCO 31004 DIA 23/64 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

$38.43
Picture of IMCO 31003 DIA 21/64 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

IMCO 31003 DIA 21/64 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

$38.43
Picture of IMCO 30463 DIA 11/32 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

IMCO 30463 DIA 11/32 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp General Purpose

$38.43
Picture of EMUGE 2517A.006 DIA 6MM SH 0.2362 LOC 0.2756 OAL 2.1260 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2517A.006 DIA 6MM SH 0.2362 LOC 0.2756 OAL 2.1260 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$38.43
Picture of EMUGE 2516A.006 DIA 6MM SH 0.2362 LOC 0.2756 OAL 2.1260 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

EMUGE 2516A.006 DIA 6MM SH 0.2362 LOC 0.2756 OAL 2.1260 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp TOP-Cut

$38.43
Picture of YG-1 SEME7304012 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7304012 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7304010 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7304010 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7304008 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7304008 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7303012 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7303012 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7303010 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7303010 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7303008 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7303008 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEME7303006 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME7303006 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84504012 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84504012 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84504010 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84504010 DIA 4MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84504008 DIA 3MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84504008 DIA 3MM SH 0.2362 LOC 0.2362 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84503012 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84503012 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84503010 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84503010 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84503008 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84503008 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of YG-1 SEM84503006 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEM84503006 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$38.41
Picture of HARVEY Tool 978408 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 978408 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 978400 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 978400 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945608 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945608 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945600 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945600 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945593 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945593 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945578 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945578 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945562 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945562 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945560 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945560 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945550 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945550 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 945547 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 945547 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937108 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937108 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937100 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937100 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937093 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937093 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937078 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937078 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937062 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937062 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 937047 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 937047 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 934908 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 934908 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 934900 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 934900 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 894225 DIA 0.025 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 894225 DIA 0.025 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 826862-C3 .062 DIA Carbide 8x Long FL EM, 4 FL, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

HARVEY Tool 826862-C3 .062 DIA Carbide 8x Long FL EM, 4 FL, AlTiN End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

$38.40
Picture of HARVEY Tool 51431 1/32 DIA x 3/32 LOC H.PLAS, 1 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 51431 1/32 DIA x 3/32 LOC H.PLAS, 1 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 50040-C8 .040 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

HARVEY Tool 50040-C8 .040 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

$38.40
Picture of HARVEY Tool 50031-C8 .031 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

HARVEY Tool 50031-C8 .031 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

$38.40
Picture of HARVEY Tool 49906 .1181 DIA x .625 LOC PLAS, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 49906 .1181 DIA x .625 LOC PLAS, 2 FL End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 48810-C4 1/8 D x 30 DEG x .010 R ENGR, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp

HARVEY Tool 48810-C4 1/8 D x 30 DEG x .010 R ENGR, DIAMOND End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp

$38.40
Picture of HARVEY Tool 47893 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47893 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47890 DIA 0.09 LOC 0.1350 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47890 DIA 0.09 LOC 0.1350 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47880 DIA 0.08 LOC 0.1200 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47880 DIA 0.08 LOC 0.1200 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47878 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47878 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47875 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47875 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47870 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47870 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47865 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47865 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47862 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47862 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47860 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47860 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47855 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47855 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47850 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47850 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47847 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47847 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 47845 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 47845 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 34708 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 34708 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33308 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33308 DIA 1/8 LOC 0.1870 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33306 DIA 0.12 LOC 0.1800 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33306 DIA 0.12 LOC 0.1800 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33305 DIA 3MM LOC 0.1770 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33305 DIA 3MM LOC 0.1770 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33304 DIA 2.90MM LOC 0.1730 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33304 DIA 2.90MM LOC 0.1730 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33303 DIA 0.11 LOC 0.1650 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33303 DIA 0.11 LOC 0.1650 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33302 DIA 0.109 LOC 0.1630 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33302 DIA 0.109 LOC 0.1630 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33301 DIA 0.105 LOC 0.1580 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33301 DIA 0.105 LOC 0.1580 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33300 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33300 DIA 0.1 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33295 DIA 0.095 LOC 0.1420 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33295 DIA 0.095 LOC 0.1420 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33293 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33293 DIA 0.093 LOC 0.1390 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33290 DIA 0.09 LOC 0.1350 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33290 DIA 0.09 LOC 0.1350 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33285 DIA 0.085 LOC 0.1270 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33285 DIA 0.085 LOC 0.1270 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33280 DIA 0.08 LOC 0.1200 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33280 DIA 0.08 LOC 0.1200 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33278 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33278 DIA 0.078 LOC 0.1170 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33275 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33275 DIA 0.075 LOC 0.1120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33270 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33270 DIA 0.07 LOC 0.1050 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33265 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33265 DIA 0.065 LOC 0.0970 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33262 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33262 DIA 0.062 LOC 0.0930 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33260 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33260 DIA 0.06 LOC 0.0900 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33255 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33255 DIA 0.055 LOC 0.0820 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33250 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33250 DIA 0.05 LOC 0.0750 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33247 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33247 DIA 0.047 LOC 0.0700 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of HARVEY Tool 33245 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

HARVEY Tool 33245 DIA 0.045 LOC 0.0670 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.40
Picture of AWARD M-210-CO DIA 1/8 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD M-210-CO DIA 1/8 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$38.40
Picture of AWARD M-210A-CO DIA 1/8 SH 0.3750 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD M-210A-CO DIA 1/8 SH 0.3750 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$38.40
Picture of AWARD L-309-CO DIA 3/16 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-309-CO DIA 3/16 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

$38.40
Picture of MASTERCUT DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Double End Square Sharp

MASTERCUT DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Double End Square Sharp

$38.39
Picture of MASTERCUT DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Double End Square Sharp

MASTERCUT DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Double End Square Sharp

$38.39
Picture of HANITA/WIDIA I4S0375T175X DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA I4S0375T175X DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

$38.37
Picture of HANITA/WIDIA I2S0375T175L DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

HANITA/WIDIA I2S0375T175L DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp WIDIA Series Mills

$38.37
Picture of YG-1 97016 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp Alu-Power End Mill

YG-1 97016 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp Alu-Power End Mill

$38.36
Picture of YG-1 86584TF DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 86584TF DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$38.36
Picture of YG-1 86584TC DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Square Sharp Carbide End Mill

YG-1 86584TC DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Square Sharp Carbide End Mill

$38.36
Picture of TUNGALOY TECA040F2-11C04-50 KS15F DIA 4MM SH 0.1575 LOC 0.4331 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square TUNG MEISTER

TUNGALOY TECA040F2-11C04-50 KS15F DIA 4MM SH 0.1575 LOC 0.4331 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square TUNG MEISTER

$38.34
Picture of AWARD L-205-CBTIALN DIA 1/8 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD L-205-CBTIALN DIA 1/8 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.34
Picture of AWARD O-805 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD O-805 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.34
Picture of MELIN H0124 DIA 0.093 SH 0.1250 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0124 DIA 0.093 SH 0.1250 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.33
Picture of MELIN H0115 DIA 0.06 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0115 DIA 0.06 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.33
Picture of MELIN H0112 DIA 0.047 SH 0.1250 LOC 0.2500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0112 DIA 0.047 SH 0.1250 LOC 0.2500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.33
Picture of IMCO 66660 DIA 8MM SH 0.3150 LOC 0.7480 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

IMCO 66660 DIA 8MM SH 0.3150 LOC 0.7480 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

$38.33
Picture of AWARD 8-004-COTIN DIA 1/16 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD 8-004-COTIN DIA 1/16 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

$38.33
Picture of YG-1 55901TE DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 55901TE DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$38.31
Picture of YG-1 54901TE DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 54901TE DIA 1/4 SH 0.2500 LOC 1.50 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$38.31
Picture of MELIN H0653 DIA 0.04 SH 0.1250 LOC 0.0600 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0653 DIA 0.04 SH 0.1250 LOC 0.0600 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.31
Picture of MELIN H0631 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0631 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.31
Picture of MELIN H0616 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0616 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.31
Picture of MASTERCUT DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

MASTERCUT DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

$38.31
Picture of MASTERCUT DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

MASTERCUT DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp

$38.31
Picture of AWARD KK-609TIN DIA 3/8 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD KK-609TIN DIA 3/8 SH 0.50 LOC 2.2500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$38.29
Picture of AWARD R-102-CBTIALN DIA 3/32 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD R-102-CBTIALN DIA 3/32 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.29
Picture of YG-1 07088HF DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

YG-1 07088HF DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

$38.27
Picture of YG-1 07088HC DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiCN Single End Square Sharp General Purpose

YG-1 07088HC DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiCN Single End Square Sharp General Purpose

$38.27
Picture of YG-1 07087HF DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

YG-1 07087HF DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiAlN Single End Square Sharp General Purpose

$38.27
Picture of YG-1 07087HC DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiCN Single End Square Sharp General Purpose

YG-1 07087HC DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix HSS TiCN Single End Square Sharp General Purpose

$38.27
Picture of YG-1 04336CN DIA 5/8 SH 0.50 LOC 1.3750 OAL 3.3750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Square Sharp General Purpose

YG-1 04336CN DIA 5/8 SH 0.50 LOC 1.3750 OAL 3.3750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Square Sharp General Purpose

$38.27
Picture of YG-1 04324CN DIA 17/32 SH 0.50 LOC 1.3750 OAL 3.3750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Square Sharp General Purpose

YG-1 04324CN DIA 17/32 SH 0.50 LOC 1.3750 OAL 3.3750 End Mill Standard Flute Standard Helix Cobalt TiN Single End Square Sharp General Purpose

$38.27
Picture of MELIN H0120 DIA 0.078 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0120 DIA 0.078 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.27
Picture of MELIN H0116 DIA 0.062 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0116 DIA 0.062 SH 0.1250 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.27
Picture of AWARD KX-255-CBTIALN DIA 5/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD KX-255-CBTIALN DIA 5/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.26
Picture of YG-1 21580TF DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 21580TF DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$38.25
Picture of YG-1 21580TC DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Square Sharp Carbide End Mill

YG-1 21580TC DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Square Sharp Carbide End Mill

$38.25
Picture of YG-1 17580TF DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

YG-1 17580TF DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp Carbide End Mill

$38.25
Picture of YG-1 17580TC DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Square Sharp Carbide End Mill

YG-1 17580TC DIA 5/16 SH 0.3750 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Square Sharp Carbide End Mill

$38.25
Picture of YG-1 07515PF DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Powder Metal TiAlN Single End Square Sharp ASP

YG-1 07515PF DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Powder Metal TiAlN Single End Square Sharp ASP

$38.24
Picture of YG-1 07515PC DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Powder Metal TiCN Single End Square Sharp ASP

YG-1 07515PC DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Powder Metal TiCN Single End Square Sharp ASP

$38.24
Picture of AWARD M-105-CBTIALN DIA 3/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD M-105-CBTIALN DIA 3/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.24
Picture of AWARD L-105-CBTIALN DIA 3/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD L-105-CBTIALN DIA 3/32 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.24
Picture of AWARD KX-805TIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD KX-805TIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$38.24
Picture of AWARD K-303-CBTIALN DIA 3/16 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD K-303-CBTIALN DIA 3/16 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.24
Picture of AWARD V-001-CBTIALN DIA 1/16 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD V-001-CBTIALN DIA 1/16 SH 0.2500 LOC 0.2500 OAL 2.00 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.24
Picture of AWARD P-104-CB DIA 3/32 SH 0.3125 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD P-104-CB DIA 3/32 SH 0.3125 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

$38.24
Picture of GORILLA MILL GMA516F2 DIA 5/16" SH 0.3125 LOC 0.8750 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp SILVERBack

GORILLA MILL GMA516F2 DIA 5/16" SH 0.3125 LOC 0.8750 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp SILVERBack

ISO: GMA516F2

$38.23
Picture of WIDIN WE52210030 DIA 10MM SH 0.3937 LOC 1.1811 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

WIDIN WE52210030 DIA 10MM SH 0.3937 LOC 1.1811 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

$38.21
Picture of WIDIN WE51405050 DIA 5MM SH 0.2362 LOC 0.3150 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

WIDIN WE51405050 DIA 5MM SH 0.2362 LOC 0.3150 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

$38.21
Picture of IMCO 61023 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

IMCO 61023 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

$38.21
Picture of SWIFTCARB AC02503DG005S100 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

SWIFTCARB AC02503DG005S100 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

$38.20
Picture of MELIN H0655 DIA 0.04 SH 0.1250 LOC 0.0600 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0655 DIA 0.04 SH 0.1250 LOC 0.0600 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.20
Picture of MELIN H0624 DIA 0.03 SH 0.1250 LOC 0.0450 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0624 DIA 0.03 SH 0.1250 LOC 0.0450 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.20
Picture of MELIN H0617 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0617 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.20
Picture of HARVEY Tool 50060-C8 .060 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

HARVEY Tool 50060-C8 .060 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

$38.20
Picture of HARVEY Tool 50050-C8 .050 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

HARVEY Tool 50050-C8 .050 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

$38.20
Picture of HARVEY Tool 50047-C8 .047 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

HARVEY Tool 50047-C8 .047 D V-HELIX NF, 3x LOC, 3 FL, TiB2 End Mill Standard Flute Standard Helix Carbide TiB2 Single End Square Sharp

$38.20
Picture of YG-1 11104 DIA 23/32 SH 0.7500 LOC 1.3125 OAL 5.00 End Mill Standard Flute Standard Helix HSS Uncoated Double End Square Sharp General Purpose

YG-1 11104 DIA 23/32 SH 0.7500 LOC 1.3125 OAL 5.00 End Mill Standard Flute Standard Helix HSS Uncoated Double End Square Sharp General Purpose

$38.17
Picture of YG-1 11094 DIA 21/32 SH 0.7500 LOC 1.3125 OAL 5.00 End Mill Standard Flute Standard Helix HSS Uncoated Double End Square Sharp General Purpose

YG-1 11094 DIA 21/32 SH 0.7500 LOC 1.3125 OAL 5.00 End Mill Standard Flute Standard Helix HSS Uncoated Double End Square Sharp General Purpose

$38.17
Picture of ICE-NFE-025-3-25-075-SQ-RND-DLC-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide DLC Single End Square Sharp Green

ICE-NFE-025-3-25-075-SQ-RND-DLC-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide DLC Single End Square Sharp Green

$38.17
Picture of ICE-NFE-025-2-25-075-SQ-RND-DLC-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide DLC Single End Square Sharp Green

ICE-NFE-025-2-25-075-SQ-RND-DLC-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide DLC Single End Square Sharp Green

$38.17
Picture of AWARD M3-003-CBTIALN DIA 1/16 SH 0.1875 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

AWARD M3-003-CBTIALN DIA 1/16 SH 0.1875 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide TiAlN Single End Square Sharp

$38.17
Picture of AWARD K-805TIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD K-805TIN DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$38.17
Picture of AWARD T-205TIN DIA 1/8 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD T-205TIN DIA 1/8 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

$38.17
Picture of YG-1 8338 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 8338 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

$38.16
Picture of SWIFTCARB AC03122CS005S100 DIA 5/16 SH 0.3125 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

SWIFTCARB AC03122CS005S100 DIA 5/16 SH 0.3125 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

$38.16
Picture of YG-1 EM886901 DIA 0.80MM SH 0.1575 LOC 0.0472 OAL 1.771 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp X-Power

YG-1 EM886901 DIA 0.80MM SH 0.1575 LOC 0.0472 OAL 1.771 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp X-Power

$38.15
Picture of YG-1 EM886008 DIA 0.80MM SH 0.1575 LOC 0.0472 OAL 1.771 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp X-Power

YG-1 EM886008 DIA 0.80MM SH 0.1575 LOC 0.0472 OAL 1.771 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp X-Power

$38.15
Picture of YG-1 02321CF DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 02321CF DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt TiAlN Single End Square Sharp General Purpose

$38.15
Picture of YG-1 02321CC DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Square Sharp General Purpose

YG-1 02321CC DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt TiCN Single End Square Sharp General Purpose

$38.15
Picture of WIDIN WAE323082 DIA 8MM SH 0.3150 LOC 2.0079 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp ALU-WAVE

WIDIN WAE323082 DIA 8MM SH 0.3150 LOC 2.0079 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp ALU-WAVE

$38.15
Picture of YG-1 4395 DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 4395 DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

$38.13
Picture of YG-1 4390 DIA 7/8 SH 0.6250 LOC 1.8750 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 4390 DIA 7/8 SH 0.6250 LOC 1.8750 OAL 4.00 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

$38.13
Picture of YG-1 4376 DIA 13/16 SH 0.7500 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 4376 DIA 13/16 SH 0.7500 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Square Sharp General Purpose

$38.13
Picture of WIDIN WE71210035P DIA 10MM SH 0.3937 LOC 0.5906 OAL 3.1496 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp WINNER 7 PLUS

WIDIN WE71210035P DIA 10MM SH 0.3937 LOC 0.5906 OAL 3.1496 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp WINNER 7 PLUS

$38.13
Picture of MELIN H0633 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0633 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.13
Picture of MELIN H0632 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0632 DIA 0.031 SH 0.1250 LOC 0.0460 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.13
Picture of MELIN H0618 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

MELIN H0618 DIA 0.025 SH 0.1250 LOC 0.0370 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp

$38.13
Picture of YG-1 E5012028 DIA 7/16" SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Generic

YG-1 E5012028 DIA 7/16" SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Generic

$38.12
Picture of YG-1 33579TF DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Square Sharp Carbide End Mill

YG-1 33579TF DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Square Sharp Carbide End Mill

$38.12
Picture of YG-1 33579TC DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Double End Square Sharp Carbide End Mill

YG-1 33579TC DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Double End Square Sharp Carbide End Mill

$38.12
Picture of YG-1 32579TF DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Square Sharp Carbide End Mill

YG-1 32579TF DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiAlN Double End Square Sharp Carbide End Mill

$38.12
Picture of YG-1 32579TC DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Double End Square Sharp Carbide End Mill

YG-1 32579TC DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Double End Square Sharp Carbide End Mill

$38.12
Picture of YG-1 04109HN DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix HSS TiN Single End Square Sharp General Purpose

YG-1 04109HN DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix HSS TiN Single End Square Sharp General Purpose

$38.12
Picture of YG-1 01109HN DIA 3/4 SH 0.7500 LOC 1.3125 OAL 3.4375 End Mill Standard Flute Standard Helix HSS TiN Single End Square Sharp General Purpose

YG-1 01109HN DIA 3/4 SH 0.7500 LOC 1.3125 OAL 3.4375 End Mill Standard Flute Standard Helix HSS TiN Single End Square Sharp General Purpose

$38.12
Picture of YG-1 E5011028 DIA 7/16" SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Generic

YG-1 E5011028 DIA 7/16" SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Generic

$38.11
Picture of WIDIN WE51408030 DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

WIDIN WE51408030 DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp WINNER

$38.11
Picture of AWARD N-805 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD N-805 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.11
Picture of AWARD M2-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M2-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.11
Picture of AWARD M15-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M15-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.11
Picture of AWARD M1-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M1-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.11
Picture of AWARD M0-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD M0-105 DIA 3/32 SH 0.1875 LOC 1.2500 OAL 2.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

$38.11
Picture of HTC 152-4437 DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Square Sharp

HTC 152-4437 DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Square Sharp

$38.09
Picture of HTC 152-2437 DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Square Sharp

HTC 152-2437 DIA 7/16 SH 0.4375 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiN Single End Square Sharp

$38.09
Picture of MELIN 2562 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Variable Helix Carbide AlCrTiN Single End Square Sharp

MELIN 2562 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Variable Helix Carbide AlCrTiN Single End Square Sharp

$38.08