Industry

Sort by
Picture of TUNGALOY MCTR26.97XU31.75X-10 1.062" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR26.97XU31.75X-10 1.062" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR26.97XU31.75X-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR28.00XM40-10 28mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR28.00XM40-10 28mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR28.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR27.00XM40-10 27mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR27.00XM40-10 27mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR27.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR26.00XM40-10 26mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR26.00XM40-10 26mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR26.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR25.00XM32-10 25mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR25.00XM32-10 25mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR25.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR24.00XM32-10 24mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR24.00XM32-10 24mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR24.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR23.00XM32-10 23mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR23.00XM32-10 23mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR23.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR22.00XM32-10 22mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR22.00XM32-10 22mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR22.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR21.00XM32-10 21mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR21.00XM32-10 21mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR21.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR22.23XU31.75-10 7/8" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR22.23XU31.75-10 7/8" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR22.23XU31.75-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR25.40XU31.75-10 1" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR25.40XU31.75-10 1" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR25.40XU31.75-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR23.80XU31.75-10 0.937" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR23.80XU31.75-10 0.937" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR23.80XU31.75-10

Call (262) 251-4020 for pricing
Picture of WIDIN VXB514A064N DIA 1 SH 0.50 LOC 1.1250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose VH SERIES

WIDIN VXB514A064N DIA 1 SH 0.50 LOC 1.1250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose VH SERIES

Call (262) 251-4020 for pricing
Picture of IMCO 63664 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63664 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of ISCAR GD-DH 0.734-10D-I1"-09 0.734" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISCAR GD-DH 0.734-10D-I1"-09 0.734" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISO: GD-DH 0.734-10D-I1"-09

$859.04
Picture of ISCAR GD-DH 0.718-10D-I1"-09 0.718" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISCAR GD-DH 0.718-10D-I1"-09 0.718" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISO: GD-DH 0.718-10D-I1"-09

$859.04
Picture of ISCAR GD-DH 0.750-10D-I1"-09 3/4" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISCAR GD-DH 0.750-10D-I1"-09 3/4" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISO: GD-DH 0.750-10D-I1"-09

$859.04
Picture of EMUGE CU20C300.5056 Tap 1-1/2-12.00TPI Plug NF/UNF/UNEF DINSI 4P-5P HSSE GLT-1

EMUGE CU20C300.5056 Tap 1-1/2-12.00TPI Plug NF/UNF/UNEF DINSI 4P-5P HSSE GLT-1

ISO: CU20C300.5056

$859.04
Picture of M.A. FORD 13875012R.030 DIA 3/4 SH 0.7500 LOC 0.1969 OAL 8.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM TuffCut® X-AL

M.A. FORD 13875012R.030 DIA 3/4 SH 0.7500 LOC 0.1969 OAL 8.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM TuffCut® X-AL

Call (262) 251-4020 for pricing
Picture of EMUGE 2883 Z.025040 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM Alu-Cut

EMUGE 2883 Z.025040 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM Alu-Cut

$858.61
Picture of EMUGE 2883 Z.025030 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM Alu-Cut

EMUGE 2883 Z.025030 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM Alu-Cut

$858.61
Picture of TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1312F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1250F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS310F32-4

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505MM00NS0CM DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Coolant Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM12505MM00NS0CM DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Coolant Variable Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of WIDIN WGE504160 DIA 16MM SH 0.6299 LOC 1.9685 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp Z-GRA-MATE

WIDIN WGE504160 DIA 16MM SH 0.6299 LOC 1.9685 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Diamond Single End Square Sharp Z-GRA-MATE

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1312FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1250FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX310F32-4

Call (262) 251-4020 for pricing
Picture of INGERSOLL S050T08HA-55 SH 0.50 OAL 5.50 Replacable Head Acc. Straight Heavy Metal Single End CHIPSURFER

INGERSOLL S050T08HA-55 SH 0.50 OAL 5.50 Replacable Head Acc. Straight Heavy Metal Single End CHIPSURFER

$857.23
Picture of INGERSOLL S075T10CK-40 SH 0.7500 OAL 6.50 Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

INGERSOLL S075T10CK-40 SH 0.7500 OAL 6.50 Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

$857.23
Picture of INGERSOLL S020T10CK120 SH 0.7874 OAL 6.6929Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

INGERSOLL S020T10CK120 SH 0.7874 OAL 6.6929Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

$857.23
Picture of INGERSOLL S050T08CA-75 SH 0.50 OAL 7.50 Replacable Head Acc. Straight Carbide Single End CHIPSURFER

INGERSOLL S050T08CA-75 SH 0.50 OAL 7.50 Replacable Head Acc. Straight Carbide Single End CHIPSURFER

$857.23
Picture of IMCO 65601 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

IMCO 65601 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of IMCO 65600 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM enDURO Mill

IMCO 65600 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0150 0.38MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NRQ00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

SWIFTCARB AF12504MM00NRQ00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of TUNGALOY DSX2000F03 20 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

TUNGALOY DSX2000F03 20 mm GigaJetDrill series with Coolant hole, L/D=3, dia=3.0 - 20.0mm

ISO: DSX2000F03

Call (262) 251-4020 for pricing
Picture of IMCO 64341 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

IMCO 64341 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LRQCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

SWIFTCARB XM12505LG00LRQCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-D-L6.70-C.750-T08-W SH 0.7500 OAL 6.70 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

ISCAR MM S-D-L6.70-C.750-T08-W SH 0.7500 OAL 6.70 Replacable Head Acc. Straight Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

$855.36
Picture of ISCAR MM S-D-L170-C20-T08-W SH 0.7874 OAL 6.6930 Replacable Head Acc. Stepped Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

ISCAR MM S-D-L170-C20-T08-W SH 0.7874 OAL 6.6930 Replacable Head Acc. Stepped Shank Tungsten "Heavy Metal" Single End MULTI-MASTER

$855.36
Picture of IMCO 65867 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

IMCO 65867 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMHT1250FSL5 DIA 1-1/4" SH 1.2500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp PHENOM

GORILLA MILL GMHT1250FSL5 DIA 1-1/4" SH 1.2500 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp PHENOM

ISO: GMHT1250FSL5

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NRN00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

SWIFTCARB AF12504MM00NRN00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 625W51742 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Cobalt Uncoated Single End 45.0° Chamfer WavCut I

HANITA/WIDIA 625W51742 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Cobalt Uncoated Single End 45.0° Chamfer WavCut I

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LRNCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

SWIFTCARB XM12505LG00LRNCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1560 3.96MM

Call (262) 251-4020 for pricing
Picture of IMCO 61216 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose Streaker Mill

IMCO 61216 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose Streaker Mill

Call (262) 251-4020 for pricing
Picture of IMCO 66540 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM enDURO Mill

IMCO 66540 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of REGAL 017897AS 3-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

REGAL 017897AS 3-8.00TPI Hand Tap Bottoming 1.0P-2.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of REGAL 017896AS 3-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

REGAL 017896AS 3-8.00TPI Hand Tap Plug 4.0P-5.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of REGAL 017895AS 3-8.00TPI Hand Tap Taper 7.0P-10.0P HSS Uncoated

REGAL 017895AS 3-8.00TPI Hand Tap Taper 7.0P-10.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505Q000RS00M DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 9.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM12505Q000RS00M DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 9.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of IMCO 61687 DIA 1 SH 1.00 LOC 1.50 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TAC Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 61687 DIA 1 SH 1.00 LOC 1.50 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TAC Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1102-882-125R-8D 1.102" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 1102-882-125R-8D 1.102" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 1102-882-125R-8D

$852.48
Picture of ISCAR DCN 1063-850-125R-8D 1.063" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 1063-850-125R-8D 1.063" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 1063-850-125R-8D

$852.48
Picture of EMUGE CU583701.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiN

EMUGE CU583701.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P Coolant HSSE TiN

ISO: CU583701.5022

$852.39
Picture of IMCO 63808 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

IMCO 63808 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NRM00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AF12504MM00NRM00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NRL00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AF12504MM00NRL00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEFS250E44-52W25CF-121 AH725 DIA 25MM SH 0.9843 LOC 2.0472 OAL 4.7638 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TEFS250E44-52W25CF-121 AH725 DIA 25MM SH 0.9843 LOC 2.0472 OAL 4.7638 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEFS250E44-52C25CF121 AH725 DIA 25MM SH 0.9843 LOC 2.0472 OAL 4.7638 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TEFS250E44-52C25CF121 AH725 DIA 25MM SH 0.9843 LOC 2.0472 OAL 4.7638 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LRMCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

SWIFTCARB XM12505LG00LRMCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of EMUGE GF333106.1058 Carbide Thread Mill M12 x 1.75MM 0.389 Cutter Diameter 0.992 LOC 3.543 OAL 4 Flute Carbide TICN

EMUGE GF333106.1058 Carbide Thread Mill M12 x 1.75MM 0.389 Cutter Diameter 0.992 LOC 3.543 OAL 4 Flute Carbide TICN

$850.58
Picture of ISCAR DFN 1535-767-125A-5D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DFN 1535-767-125A-5D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DFN 1535-767-125A-5D-IQ

$850.56
Picture of SWIFTCARB AF12504MM00NRH00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

SWIFTCARB AF12504MM00NRH00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NRC00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AF12504MM00NRC00 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NR600 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

SWIFTCARB AF12504MM00NR600 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504MM00NR300 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

SWIFTCARB AF12504MM00NR300 DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12505KW00NS100 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

SWIFTCARB AF12505KW00NS100 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of IMCO 66539 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

IMCO 66539 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of ZCC ZTD05-1.969"-XP1.50"-SP14-02 1.969" DIA Square Insert Drill

ZCC ZTD05-1.969"-XP1.50"-SP14-02 1.969" DIA Square Insert Drill

$849.71
Picture of EMUGE C0109401.0136 Tap Mod Bottom M36-4.00MM 6H Metric DIN/DIN HSSE TiCN

EMUGE C0109401.0136 Tap Mod Bottom M36-4.00MM 6H Metric DIN/DIN HSSE TiCN

ISO: C0109401.0136

$849.66
Picture of EMUGE GF442206.5013 Carbide Thread Mill 1/2" x 13.00TPI 0.407 Cutter Diameter 1.235 LOC 3.740 OAL 2 Flute Carbide TICN

EMUGE GF442206.5013 Carbide Thread Mill 1/2" x 13.00TPI 0.407 Cutter Diameter 1.235 LOC 3.740 OAL 2 Flute Carbide TICN

$849.45
Picture of EMUGE GF442206.0112 Carbide Thread Mill M12 x 1.75MM 0.389 Cutter Diameter 1.175 LOC 3.740 OAL 2 Flute Carbide TICN

EMUGE GF442206.0112 Carbide Thread Mill M12 x 1.75MM 0.389 Cutter Diameter 1.175 LOC 3.740 OAL 2 Flute Carbide TICN

$849.45
Picture of IMCO 63981 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

IMCO 63981 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NRV00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

SWIFTCARB AF12504KW00NRV00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LRHCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM

SWIFTCARB XM12505LG00LRHCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LRCCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XM12505LG00LRCCM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LR6CM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

SWIFTCARB XM12505LG00LR6CM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LR3CM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

SWIFTCARB XM12505LG00LR3CM DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505LG00LR30M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

SWIFTCARB XM12505LG00LR30M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1181F1250-5 1.181" Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TISU1181F1250-5 1.181" Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TISU1181F1250-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1142F1250-5 1.142" Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TISU1142F1250-5 1.142" Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TISU1142F1250-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS300F32-5 30mm Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TIS300F32-5 30mm Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TIS300F32-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS290F32-5 29mm Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TIS290F32-5 29mm Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TIS290F32-5

Call (262) 251-4020 for pricing
Picture of IMCO 63618 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

IMCO 63618 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of IMCO 66352 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Corner Radius 0.1250 3.18MM enDURO Mill

IMCO 66352 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Single End Corner Radius 0.1250 3.18MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of IMCO 61686 DIA 1 SH 1.00 LOC 1.50 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TAC Single End Square Sharp Pow-R-Path Mill

IMCO 61686 DIA 1 SH 1.00 LOC 1.50 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TAC Single End Square Sharp Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of YMW 383210 2-11.50TPI Pipe Straight Flute Pipe HSS Nitride

YMW 383210 2-11.50TPI Pipe Straight Flute Pipe HSS Nitride

Call (262) 251-4020 for pricing
Picture of EMUGE C4063701.0491 Tap Mod Bottom M30-2.00MM 6H Metric DIN/DIN Coolant HSSE TiN

EMUGE C4063701.0491 Tap Mod Bottom M30-2.00MM 6H Metric DIN/DIN Coolant HSSE TiN

ISO: C4063701.0491

$847.54
Picture of EMUGE C0101001.4046 Tap 1-1/2-11.00TPI Pipe BSP DIN/DIN 2.0P-3.0P HSS HSSE

EMUGE C0101001.4046 Tap 1-1/2-11.00TPI Pipe BSP DIN/DIN 2.0P-3.0P HSS HSSE

ISO: C0101001.4046

$847.49
Picture of EMUGE 2888RZ.1000 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Carbide CrN Single End Square Sharp Alu-Cut

EMUGE 2888RZ.1000 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Carbide CrN Single End Square Sharp Alu-Cut

$846.56
Picture of WIDIN VXE516A064 DIA 1 SH 0.50 LOC 2.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp VH SERIES

WIDIN VXE516A064 DIA 1 SH 0.50 LOC 2.00 OAL 5.00 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp VH SERIES

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR1250R52504.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.2500 6.35MM

GORILLA MILL GMNR1250R52504.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.2500 6.35MM

ISO: GMNR1250R52504.125

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR1250R51904.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.1900 4.83MM

GORILLA MILL GMNR1250R51904.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.1900 4.83MM

ISO: GMNR1250R51904.125

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR1250R51204.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.1200 3.05MM

GORILLA MILL GMNR1250R51204.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.1200 3.05MM

ISO: GMNR1250R51204.125

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR1250R50904.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.0900 2.29MM

GORILLA MILL GMNR1250R50904.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.0900 2.29MM

ISO: GMNR1250R50904.125

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMNR1250R50604.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.0600 1.52MM

GORILLA MILL GMNR1250R50604.125 DIA 1-1/4" SH 1.2500 LOC 1.50 OAL 6.00 End Mill Carbide TiAlN Single End Corner Radius 0.0600 1.52MM

ISO: GMNR1250R50604.125

Call (262) 251-4020 for pricing
Picture of EMUGE GF175331.5787 Carbide Thread Mill 3/4" x 14.00TPI 0.561 Cutter Diameter 1.033 LOC 3.346 OAL 4 Flute Carbide

EMUGE GF175331.5787 Carbide Thread Mill 3/4" x 14.00TPI 0.561 Cutter Diameter 1.033 LOC 3.346 OAL 4 Flute Carbide

$845.74
Picture of EMUGE GF175331.5786 Carbide Thread Mill 1/2"-3/4" x 14.00TPI 0.561 Cutter Diameter 1.033 LOC 3.346 OAL 4 Flute Carbide

EMUGE GF175331.5786 Carbide Thread Mill 1/2"-3/4" x 14.00TPI 0.561 Cutter Diameter 1.033 LOC 3.346 OAL 4 Flute Carbide

$845.74
Picture of IMCO 64340 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

IMCO 64340 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of WIDIN ZE506250 DIA 25MM SH 0.9843 LOC 1.9685 OAL 4.7244 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZE506250 DIA 25MM SH 0.9843 LOC 1.9685 OAL 4.7244 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX300L139-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX300L139-3

Call (262) 251-4020 for pricing
Picture of EMUGE C1950901.0331 Tap M14-1.50MM Mod Bottom Metric DIN/DIN 2.0P-3.0P Coolant Carbide

EMUGE C1950901.0331 Tap M14-1.50MM Mod Bottom Metric DIN/DIN 2.0P-3.0P Coolant Carbide

ISO: C1950901.0331

$843.76
Picture of SWIFTCARB XD12504R300RTCCM DIA 1-1/4 SH 1.2500 LOC 6.50 OAL 9.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

SWIFTCARB XD12504R300RTCCM DIA 1-1/4 SH 1.2500 LOC 6.50 OAL 9.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of EMUGE GFB35106.0118 Carbide Thread Mill M18 x2.50MM Carbide TICN

EMUGE GFB35106.0118 Carbide Thread Mill M18 x2.50MM Carbide TICN

$842.51
Picture of TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1375-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS340F40-3

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1181-590-125A-5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 1181-590-125A-5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 1181-590-125A-5D

$841.92
Picture of ISCAR DCN 1142-571-125A-5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 1142-571-125A-5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 1142-571-125A-5D

$841.92
Picture of ISCAR DCN 1181-590-150A-5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 1181-590-150A-5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 1181-590-150A-5D

$841.92
Picture of ISCAR DCN 1142-571-150A-5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 1142-571-150A-5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 1142-571-150A-5D

$841.92
Picture of TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1437FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1375FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX340F40-3

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12507LG00LRV0M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

SWIFTCARB XM12507LG00LRV0M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of VIKING 15280 2-5/16 HSS Drill Taper Shank Length Black Oxide

VIKING 15280 2-5/16 HSS Drill Taper Shank Length Black Oxide

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NRQ00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

SWIFTCARB AF12504KW00NRQ00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of WIDIN HPI508165 16.50MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI508165 16.50MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of IMCO 64339 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 64339 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of YG-1 SEME72250120 DIA 25MM SH 0.9843 LOC 4.7244 OAL 9.8425 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME72250120 DIA 25MM SH 0.9843 LOC 4.7244 OAL 9.8425 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp 4G Mill

$839.90
Picture of YG-1 SEME70250120 DIA 25MM SH 0.9843 LOC 4.7244 OAL 9.8425 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp 4G Mill

YG-1 SEME70250120 DIA 25MM SH 0.9843 LOC 4.7244 OAL 9.8425 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Square Sharp 4G Mill

$839.90
Picture of YMW 383235 2-11.50TPI Pipe Straight Flute Pipe HSS Nitride

YMW 383235 2-11.50TPI Pipe Straight Flute Pipe HSS Nitride

Call (262) 251-4020 for pricing
Picture of ISCAR GD-DH 0.562-15D-I1"-07 0.562" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISCAR GD-DH 0.562-15D-I1"-07 0.562" GunDrill s Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

ISO: GD-DH 0.562-15D-I1"-07

$839.45
Picture of SWIFTCARB AF12504KW00NRN00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

SWIFTCARB AF12504KW00NRN00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1560 3.96MM

Call (262) 251-4020 for pricing
Picture of EMUGE GFB35101.0359 Carbide Thread Mill M16 x1.50MM Carbide

EMUGE GFB35101.0359 Carbide Thread Mill M16 x1.50MM Carbide

$838.43
Picture of IMCO 63617 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

IMCO 63617 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of IMCO 63980 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

IMCO 63980 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of EMUGE GF163151.9518 Carbide Thread Mill M30 x3.00MM Carbide

EMUGE GF163151.9518 Carbide Thread Mill M30 x3.00MM Carbide

$837.45
Picture of EMUGE GF163151.9516 Carbide Thread Mill M27 x2.00MM Carbide

EMUGE GF163151.9516 Carbide Thread Mill M27 x2.00MM Carbide

$837.45
Picture of IMCO 66537 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

IMCO 66537 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Square Sharp enDURO Mill

Call (262) 251-4020 for pricing
Picture of EMUGE CU50C310.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE GLT-1

EMUGE CU50C310.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE GLT-1

ISO: CU50C310.5022

$837.19
Picture of EMUGE CU50C300.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE GLT-1

EMUGE CU50C300.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE GLT-1

ISO: CU50C300.5022

$837.19
Picture of MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM V4

MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM V4

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0450 1.14MM V4

MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0450 1.14MM V4

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM V4

MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM V4

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0200 0.51MM V4

MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0200 0.51MM V4

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM V4

MASTERCUT DIA 1 SH 1.00 LOC 4.00 OAL 7.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM V4

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12507MM00NS00M DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM12507MM00NS00M DIA 1-1/4 SH 1.2500 LOC 5.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of IMCO 66350 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM enDURO Mill

IMCO 66350 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 77NE10004T DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill III

HANITA/WIDIA 77NE10004T DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill III

Call (262) 251-4020 for pricing
Picture of ISCAR DR2000-4000-150-16-2D-N 2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR2000-4000-150-16-2D-N 2" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR2000-4000-150-16-2D-N

$836.16
Picture of ISCAR DR1937-3874-150-16-2D-N 1.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1937-3874-150-16-2D-N 1.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1937-3874-150-16-2D-N

$836.16
Picture of ISCAR DR1875-3750-150-16-2D-N 1-7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1875-3750-150-16-2D-N 1-7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1875-3750-150-16-2D-N

$836.16
Picture of ISCAR DR1812-3624-150-16-2D-N 1.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1812-3624-150-16-2D-N 1.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1812-3624-150-16-2D-N

$836.16
Picture of EMUGE CU503700.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE TiN

EMUGE CU503700.5022 Tap 1-1/2-6.00TPI Mod Bottom NC/UNC DINSI 2.0P-3.0P HSSE TiN

ISO: CU503700.5022

$836.14
Picture of SWIFTCARB XM12509FK00BS0CM DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Coolant Variable Helix Carbide AlTiN Single End Square Sharp

SWIFTCARB XM12509FK00BS0CM DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Coolant Variable Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of IMCO 63783 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Path Mill

IMCO 63783 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12505KA00LRVCM DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

SWIFTCARB XM12505KA00LRVCM DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of EMUGE 2890 Z.025040 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM Alu-Cut

EMUGE 2890 Z.025040 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1575 4.00MM Alu-Cut

$835.97
Picture of EMUGE 2890 Z.025030 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM Alu-Cut

EMUGE 2890 Z.025030 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM Alu-Cut

$835.97
Picture of EMUGE 2890 Z.025025 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0984 2.50MM Alu-Cut

EMUGE 2890 Z.025025 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0984 2.50MM Alu-Cut

$835.97
Picture of EMUGE 2890 Z.025020 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM Alu-Cut

EMUGE 2890 Z.025020 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM Alu-Cut

$835.97
Picture of WIDIN ZM504250 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZM504250 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.5118 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NRM00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

SWIFTCARB AF12504KW00NRM00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NRL00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

SWIFTCARB AF12504KW00NRL00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of IMCO 67452 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

IMCO 67452 DIA 1 SH 1.00 LOC 4.2500 OAL 7.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of EMUGE C0501000.4045 Tap 1-3/8-11.00TPI Pipe BSP DIN/DIN 2.0P-3.0P HSSE

EMUGE C0501000.4045 Tap 1-3/8-11.00TPI Pipe BSP DIN/DIN 2.0P-3.0P HSSE

ISO: C0501000.4045

$834.92
Picture of INGERSOLL BTSI011-L102.36 0.433 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI011-L102.36 0.433 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI011-L102.36

$834.60
Picture of INGERSOLL BTSI014-L102.36 0.551 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI014-L102.36 0.551 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI014-L102.36

$834.60
Picture of INGERSOLL BTSI012-L102.36 0.472 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI012-L102.36 0.472 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI012-L102.36

$834.60
Picture of INGERSOLL BTSI043-L62.99 1.693 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI043-L62.99 1.693 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI043-L62.99

$834.60
Picture of INGERSOLL BTSI016-L102.36 0.63 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI016-L102.36 0.63 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI016-L102.36

$834.60
Picture of INGERSOLL BTSI015-L102.36 0.591 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI015-L102.36 0.591 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI015-L102.36

$834.60
Picture of INGERSOLL BTSI013-L102.36 0.512 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI013-L102.36 0.512 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI013-L102.36

$834.60
Picture of INGERSOLL BTSI017-L102.36 0.669 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI017-L102.36 0.669 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI017-L102.36

$834.60
Picture of EMUGE C4063701.0130 Tap Mod Bottom M30-3.50MM 6H Metric DIN/DIN Coolant HSSE TiN

EMUGE C4063701.0130 Tap Mod Bottom M30-3.50MM 6H Metric DIN/DIN Coolant HSSE TiN

ISO: C4063701.0130

$834.54
Picture of IMCO 64410 DIA 25MM SH 0.9843 LOC 2.4803 OAL 5.3150 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Path Mill

IMCO 64410 DIA 25MM SH 0.9843 LOC 2.4803 OAL 5.3150 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1181 3.00MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of EMUGE CU20C310.5022 Tap 1-1/2-6.00TPI Plug NC/UNC DINSI 4P-5P HSSE GLT-1

EMUGE CU20C310.5022 Tap 1-1/2-6.00TPI Plug NC/UNC DINSI 4P-5P HSSE GLT-1

ISO: CU20C310.5022

$834.41
Picture of EMUGE CU20C300.5022 Tap 1-1/2-6.00TPI Plug NC/UNC DINSI 4P-5P HSSE GLT-1

EMUGE CU20C300.5022 Tap 1-1/2-6.00TPI Plug NC/UNC DINSI 4P-5P HSSE GLT-1

ISO: CU20C300.5022

$834.41
Picture of SWIFTCARB AF12504KW00NRH00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

SWIFTCARB AF12504KW00NRH00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NRC00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

SWIFTCARB AF12504KW00NRC00 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NR600 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

SWIFTCARB AF12504KW00NR600 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of SWIFTCARB AF12504KW00NR300 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

SWIFTCARB AF12504KW00NR300 DIA 1-1/4 SH 1.2500 LOC 4.2500 OAL 7.50 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of IMCO 63616 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63616 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of EMUGE 2883 Z.025025 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0984 2.50MM Alu-Cut

EMUGE 2883 Z.025025 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0984 2.50MM Alu-Cut

$833.60
Picture of EMUGE 2883 Z.025020 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM Alu-Cut

EMUGE 2883 Z.025020 DIA 25MM SH 0.9843 LOC 1.1811 OAL 4.9213 End Mill Standard Flute/With Coolant Variable Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM Alu-Cut

$833.60
Picture of EMUGE GF335106.5048 Carbide Thread Mill 9/16" x18.00TPI Carbide TiCN

EMUGE GF335106.5048 Carbide Thread Mill 9/16" x18.00TPI Carbide TiCN

$833.59
Picture of ZCC ZTD04-1.969"-XP1.50"-SP14-02 1.969" DIA Square Insert Drill

ZCC ZTD04-1.969"-XP1.50"-SP14-02 1.969" DIA Square Insert Drill

$833.58
Picture of IMCO 66349 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

IMCO 66349 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM enDURO Mill

Call (262) 251-4020 for pricing
Picture of IMCO 68115 DIA 25MM SH 0.9843 LOC 1.2598 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

IMCO 68115 DIA 25MM SH 0.9843 LOC 1.2598 OAL 5.9055 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of SWIFTCARB XM12507LG00LRQ0M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

SWIFTCARB XM12507LG00LRQ0M DIA 1-1/4 SH 1.2500 LOC 4.50 OAL 7.50 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.1870 4.75MM

Call (262) 251-4020 for pricing
Picture of IMCO 63979 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63979 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of AWARD BM2-056-CO DIA 5/64 SH 0.1875 LOC 1.50 OAL 2.6875 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BM2-056-CO DIA 5/64 SH 0.1875 LOC 1.50 OAL 2.6875 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BM2-054-COTIN DIA 5/64 SH 0.1875 LOC 1.00 OAL 2.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BM2-054-COTIN DIA 5/64 SH 0.1875 LOC 1.00 OAL 2.2500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BM2-052-COTIN DIA 5/64 SH 0.1875 LOC 0.50 OAL 1.7500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

AWARD BM2-052-COTIN DIA 5/64 SH 0.1875 LOC 0.50 OAL 1.7500 End Mill Taper Flute Cobalt TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD BM2-052-CO DIA 5/64 SH 0.1875 LOC 0.50 OAL 1.7500 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

AWARD BM2-052-CO DIA 5/64 SH 0.1875 LOC 0.50 OAL 1.7500 End Mill Taper Flute Cobalt Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of IMCO 64301 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

IMCO 64301 DIA 1 SH 1.00 LOC 2.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.1250 3.18MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of MASTERCUT DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0450 1.14MM V5 ULTRA

MASTERCUT DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide nACRoA Single End Corner Radius 0.0450 1.14MM V5 ULTRA

Call (262) 251-4020 for pricing
Picture of IMCO 63442 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

IMCO 63442 DIA 1 SH 1.00 LOC 2.50 OAL 5.50 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of EMUGE GF442256.0100 Carbide Thread Mill M10 x 1.50MM 0.322 Cutter Diameter 1.007 LOC 3.346 OAL 3 Flute Carbide TICN

EMUGE GF442256.0100 Carbide Thread Mill M10 x 1.50MM 0.322 Cutter Diameter 1.007 LOC 3.346 OAL 3 Flute Carbide TICN

$831.00