Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of KOROLOY MGMN 400-02-M NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.157 Radius

KOROLOY MGMN 400-02-M NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.157 Radius

ANSI: MGMN 400-02-M NC3030

ISO: MGMN 400-02-M NC3030

$12.03
Picture of KOROLOY MGGN 300-02-M NC3120 Cut Off, Grooving,Groove Turning Insert TiCN + TIC + Al2O3 0.118 Radius

KOROLOY MGGN 300-02-M NC3120 Cut Off, Grooving,Groove Turning Insert TiCN + TIC + Al2O3 0.118 Radius

ANSI: MGGN 300-02-M NC3120

ISO: MGGN 300-02-M NC3120

$12.03
Picture of KOROLOY MGEHR 16-6 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

KOROLOY MGEHR 16-6 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

ANSI: MGEHR 16-6

ISO: MGEHR 16-6

$12.03
Picture of KOROLOY MGEHR 16-5 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

KOROLOY MGEHR 16-5 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

ANSI: MGEHR 16-5

ISO: MGEHR 16-5

$12.03
Picture of KOROLOY MGEHL 20-6 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Left Hand MG Insert

KOROLOY MGEHL 20-6 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Left Hand MG Insert

ANSI: MGEHL 20-6

ISO: MGEHL 20-6

$12.03
Picture of KOROLOY MGEHL 20-5 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Left Hand MG Insert

KOROLOY MGEHL 20-5 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Left Hand MG Insert

ANSI: MGEHL 20-5

ISO: MGEHL 20-5

$12.03
Picture of KOROLOY MGEHL 16-6 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

KOROLOY MGEHL 16-6 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

ANSI: MGEHL 16-6

ISO: MGEHL 16-6

$12.03
Picture of KOROLOY MGMN 200-M NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.097 Radius

KOROLOY MGMN 200-M NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.097 Radius

ANSI: MGMN 200-M NC3030

ISO: MGMN 200-M NC3030

$12.03
Picture of KOROLOY MGMN 250-G NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.097 Radius

KOROLOY MGMN 250-G NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.097 Radius

ANSI: MGMN 250-G NC3030

ISO: MGMN 250-G NC3030

$12.03
Picture of KOROLOY MGMN 150-G NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.059 Radius

KOROLOY MGMN 150-G NC3030 Cut Off, Grooving,Groove Turning Insert TiC + TiCN + Al2O3 + TiN 0.059 Radius

ANSI: MGMN 150-G NC3030

ISO: MGMN 150-G NC3030

$12.03
Picture of KOROLOY MGEHL 16-2 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

KOROLOY MGEHL 16-2 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

ANSI: MGEHL 16-2

ISO: MGEHL 16-2

$11.94
Picture of KOROLOY MGEHR 20-6 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Right Hand MG Insert

KOROLOY MGEHR 20-6 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Right Hand MG Insert

ANSI: MGEHR 20-6

ISO: MGEHR 20-6

$11.58
Picture of ISCAR GIMY 420 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIMY 420 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIMY 420 IC20

ISO: GIMY 420 IC20

$11.45
Picture of ISCAR GIMY 315 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIMY 315 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIMY 315 IC20

ISO: GIMY 315 IC20

$11.29
Picture of TUNGALOY GT50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY GT50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: GT50 T9225

ISO: GT50 T9225

$11.07
Picture of TUNGALOY GR50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

TUNGALOY GR50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

ANSI: GR50 T9225

ISO: GR50 T9225

$11.07
Picture of ISCAR GIMF 406 IC4 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ISCAR GIMF 406 IC4 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide

ANSI: GIMF 406 IC4

ISO: GIMF 406 IC4

$11.02
Picture of ISCAR GIMF 406 IC20 Grooving,Groove Turning Insert

ISCAR GIMF 406 IC20 Grooving,Groove Turning Insert

ANSI: GIMF 406 IC20

ISO: GIMF 406 IC20

$11.02
Picture of ISCAR GIM 4 IC20 Grooving,Groove Turning Insert

ISCAR GIM 4 IC20 Grooving,Groove Turning Insert

ANSI: GIM 4 IC20

ISO: GIM 4 IC20

$11.02
Picture of ISCAR GIMT 402 IC07 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR GIMT 402 IC07 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: GIMT 402 IC07

ISO: GIMT 402 IC07

$11.02
Picture of ISCAR GIMT 404 IC07 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR GIMT 404 IC07 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: GIMT 404 IC07

ISO: GIMT 404 IC07

$11.02
Picture of TUNGALOY WGE30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

TUNGALOY WGE30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

ANSI: WGE30 NS9530

ISO: WGE30 NS9530

$11.01
Picture of TUNGALOY WGE20 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

TUNGALOY WGE20 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

ANSI: WGE20 NS9530

ISO: WGE20 NS9530

$11.01
Picture of TUNGALOY GE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

TUNGALOY GE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

ANSI: GE30 T9225

ISO: GE30 T9225

$10.98
Picture of KOROLOY MGEHR 20-5 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Right Hand MG Insert

KOROLOY MGEHR 20-5 Cut Off,Grooving,Groove Turning STICK Tool1.2500 Right Hand MG Insert

ANSI: MGEHR 20-5

ISO: MGEHR 20-5

$10.98
Picture of KOROLOY MGEHL 16-4 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

KOROLOY MGEHL 16-4 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

ANSI: MGEHL 16-4

ISO: MGEHL 16-4

$10.98
Picture of ISCAR GIMY 304 IC4 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIMY 304 IC4 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIMY 304 IC4

ISO: GIMY 304 IC4

$10.75
Picture of ISCAR GIM 3.2-4RA IC20 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide

ISCAR GIM 3.2-4RA IC20 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide

ANSI: GIM 3.2-4RA IC20

ISO: GIM 3.2-4RA IC20

$10.75
Picture of ISCAR GIMY 304 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIMY 304 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIMY 304 IC20

ISO: GIMY 304 IC20

$10.75
Picture of ISCAR GIMT 302 IC07 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GIMT 302 IC07 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GIMT 302 IC07

ISO: GIMT 302 IC07

$10.75
Picture of ISCAR GIMT 304 IC07 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIMT 304 IC07 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIMT 304 IC07

ISO: GIMT 304 IC07

$10.75
Picture of KOROLOY MGGN 500-02-M NC3120 Cut Off, Grooving,Groove Turning Insert TiCN + TIC + Al2O3 0.197 Radius

KOROLOY MGGN 500-02-M NC3120 Cut Off, Grooving,Groove Turning Insert TiCN + TIC + Al2O3 0.197 Radius

ANSI: MGGN 500-02-M NC3120

ISO: MGGN 500-02-M NC3120

$10.68
Picture of KOROLOY MGEHR 16-2 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

KOROLOY MGEHR 16-2 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

ANSI: MGEHR 16-2

ISO: MGEHR 16-2

$10.68
Picture of TUNGALOY GR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY GR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: GR40 T9225

ISO: GR40 T9225

$10.62
Picture of INGERSOLL RSJ3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RSJ3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RSJ3 TT9080

ISO: RSJ3 TT9080

$10.52
Picture of INGERSOLL RSJ3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RSJ3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RSJ3 TT8020

ISO: RSJ3 TT8020

$10.52
Picture of INGERSOLL RSJ3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RSJ3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RSJ3 TT7220

ISO: RSJ3 TT7220

$10.52
Picture of INGERSOLL RSC3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RSC3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RSC3 TT9080

ISO: RSC3 TT9080

$10.52
Picture of INGERSOLL RSC3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RSC3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RSC3 TT8020

ISO: RSC3 TT8020

$10.52
Picture of INGERSOLL RSC3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RSC3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RSC3 TT7220

ISO: RSC3 TT7220

$10.52
Picture of TUNGALOY WGT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY WGT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: WGT50 NS9530

ISO: WGT50 NS9530

$10.50
Picture of TUNGALOY WGR50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

TUNGALOY WGR50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: WGR50 NS9530

ISO: WGR50 NS9530

$10.50
Picture of ISCAR GIM 2.2J-8LA IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide

ISCAR GIM 2.2J-8LA IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide

ANSI: GIM 2.2J-8LA IC20

ISO: GIM 2.2J-8LA IC20

$10.36
Picture of ISCAR GIM 2.2J-8RA IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide

ISCAR GIM 2.2J-8RA IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.087 Wide

ANSI: GIM 2.2J-8RA IC20

ISO: GIM 2.2J-8RA IC20

$10.36
Picture of INGERSOLL RSJ2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RSJ2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RSJ2 TT9080

ISO: RSJ2 TT9080

$10.12
Picture of INGERSOLL RSJ2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RSJ2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RSJ2 TT8020

ISO: RSJ2 TT8020

$10.12
Picture of INGERSOLL RSJ2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RSJ2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RSJ2 TT7220

ISO: RSJ2 TT7220

$10.12
Picture of INGERSOLL RSC2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RSC2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RSC2 TT9080

ISO: RSC2 TT9080

$10.12
Picture of INGERSOLL RSC2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RSC2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RSC2 TT8020

ISO: RSC2 TT8020

$10.12
Picture of INGERSOLL RSC2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RSC2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RSC2 TT7220

ISO: RSC2 TT7220

$10.12
Picture of TUNGALOY WGT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY WGT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: WGT40 NS9530

ISO: WGT40 NS9530

$10.02
Picture of TUNGALOY WGR40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

TUNGALOY WGR40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

ANSI: WGR40 NS9530

ISO: WGR40 NS9530

$10.02
Picture of TUNGALOY WGT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY WGT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: WGT30 NS9530

ISO: WGT30 NS9530

$9.21
Picture of TUNGALOY WGR30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

TUNGALOY WGR30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: WGR30 NS9530

ISO: WGR30 NS9530

$8.88
Picture of KOROLOY MGEHR 16-3 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

KOROLOY MGEHR 16-3 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Right Hand MG Insert

ANSI: MGEHR 16-3

ISO: MGEHR 16-3

$8.81
Picture of TUNGALOY GE50 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

TUNGALOY GE50 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

ANSI: GE50 NS9530

ISO: GE50 NS9530

$8.67
Picture of KOROLOY MGEHL 16-3 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

KOROLOY MGEHL 16-3 Cut Off,Grooving,Groove Turning STICK Tool1.0000 Left Hand MG Insert

ANSI: MGEHL 16-3

ISO: MGEHL 16-3

$8.43
Picture of TUNGALOY GE40 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.157 Wide

TUNGALOY GE40 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.157 Wide

ANSI: GE40 NS9530

ISO: GE40 NS9530

$8.19
Picture of TUNGALOY GE30 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

TUNGALOY GE30 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

ANSI: GE30 NS9530

ISO: GE30 NS9530

$7.56
Picture of TUNGALOY GE20 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

TUNGALOY GE20 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

ANSI: GE20 NS9530

ISO: GE20 NS9530

$7.56
Picture of TUNGALOY GT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY GT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: GT50 NS9530

ISO: GT50 NS9530

$7.35
Picture of TUNGALOY GT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY GT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: GT40 NS9530

ISO: GT40 NS9530

$6.99
Picture of TUNGALOY GT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY GT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: GT30 NS9530

ISO: GT30 NS9530

$6.54
Picture of TUNGALOY DTI4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 T9125

ISO: DTI4-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI3-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 T9125

ISO: DTI3-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI800-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.315 Wide

TUNGALOY DTI800-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.315 Wide

ANSI: DTI800-120 T9125

ISO: DTI800-120 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI800-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.315 Wide

TUNGALOY DTI800-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.315 Wide

ANSI: DTI800-080 T9125

ISO: DTI800-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI600-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

TUNGALOY DTI600-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

ANSI: DTI600-120 T9125

ISO: DTI600-120 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI600-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

TUNGALOY DTI600-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

ANSI: DTI600-080 T9125

ISO: DTI600-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI500-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.197 Wide

TUNGALOY DTI500-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.197 Wide

ANSI: DTI500-080 T9125

ISO: DTI500-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI500-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY DTI500-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: DTI500-040 T9125

ISO: DTI500-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.157 Wide

TUNGALOY DTI400-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.157 Wide

ANSI: DTI400-080 T9125

ISO: DTI400-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI400-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI400-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTI400-040 T9125

ISO: DTI400-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI300-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI300-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTI300-040 T9125

ISO: DTI300-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR600-300 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR600-300 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

ANSI: DTR600-300 T9125

ISO: DTR600-300 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR500-250 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR500-250 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

ANSI: DTR500-250 T9125

ISO: DTR500-250 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR478-239 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.094 Corner Radius 0.188 Wide

TUNGALOY DTR478-239 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.094 Corner Radius 0.188 Wide

ANSI: DTR478-239 T9125

ISO: DTR478-239 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR400-200 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR400-200 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: DTR400-200 T9125

ISO: DTR400-200 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR300-150 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR300-150 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

ANSI: DTR300-150 T9125

ISO: DTR300-150 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR8-400 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.157 Corner Radius 0.315 Wide

TUNGALOY DTR8-400 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.157 Corner Radius 0.315 Wide

ANSI: DTR8-400 T9125

ISO: DTR8-400 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR6-300 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR6-300 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

ANSI: DTR6-300 T9125

ISO: DTR6-300 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 T9125

ISO: DTR5-250 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR4-200 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 T9125

ISO: DTR4-200 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR3-150 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 T9125

ISO: DTR3-150 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX5-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY DTX5-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: DTX5-040 T9125

ISO: DTX5-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTX4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTX4-040 T9125

ISO: DTX4-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX3-030 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.011 Corner Radius 0.118 Wide

TUNGALOY DTX3-030 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.011 Corner Radius 0.118 Wide

ANSI: DTX3-030 T9125

ISO: DTX3-030 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE4-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTE4-040 T9125

ISO: DTE4-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE3-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 T9125

ISO: DTE3-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE800-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.315 Wide

TUNGALOY DTE800-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.315 Wide

ANSI: DTE800-120 T9125

ISO: DTE800-120 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE800-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.315 Wide

TUNGALOY DTE800-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.315 Wide

ANSI: DTE800-080 T9125

ISO: DTE800-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE600-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

TUNGALOY DTE600-120 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.047 Corner Radius 0.236 Wide

ANSI: DTE600-120 T9125

ISO: DTE600-120 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE600-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

TUNGALOY DTE600-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.236 Wide

ANSI: DTE600-080 T9125

ISO: DTE600-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE515-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.203 Wide

TUNGALOY DTE515-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.203 Wide

ANSI: DTE515-015 T9125

ISO: DTE515-015 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE500-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.197 Wide

TUNGALOY DTE500-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.197 Wide

ANSI: DTE500-080 T9125

ISO: DTE500-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE500-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY DTE500-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: DTE500-040 T9125

ISO: DTE500-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE478-055 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.021 Corner Radius 0.188 Wide

TUNGALOY DTE478-055 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.021 Corner Radius 0.188 Wide

ANSI: DTE478-055 T9125

ISO: DTE478-055 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE415-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.163 Wide

TUNGALOY DTE415-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.163 Wide

ANSI: DTE415-015 T9125

ISO: DTE415-015 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.157 Wide

TUNGALOY DTE400-080 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.031 Corner Radius 0.157 Wide

ANSI: DTE400-080 T9125

ISO: DTE400-080 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE400-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE400-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.157 Wide

ANSI: DTE400-040 T9125

ISO: DTE400-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE315-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.124 Wide

TUNGALOY DTE315-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.124 Wide

ANSI: DTE315-015 T9125

ISO: DTE315-015 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE300-040 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTE300-040 T9125

ISO: DTE300-040 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE300-020 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

TUNGALOY DTE300-020 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

ANSI: DTE300-020 T9125

ISO: DTE300-020 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE265-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.104 Wide

TUNGALOY DTE265-015 T9125 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.005 Corner Radius 0.104 Wide

ANSI: DTE265-015 T9125

ISO: DTE265-015 T9125

Call (262) 251-4020 for pricing
Picture of TUNGALOY GE20 AH120 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

TUNGALOY GE20 AH120 Clamp Down Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

ANSI: GE20 AH120

ISO: GE20 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY JCTER1010-1.4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.393 Shank

TUNGALOY JCTER1010-1.4T10 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.393 Shank

ANSI: JCTER1010-1.4T10

ISO: JCTER1010-1.4T10

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT50 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

TUNGALOY WGT50 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

ANSI: WGT50 AH120

ISO: WGT50 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE20 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

TUNGALOY WGE20 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.079 Wide

ANSI: WGE20 AH120

ISO: WGE20 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGR40 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

TUNGALOY WGR40 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.078 Corner Radius 0.157 Wide

ANSI: WGR40 AH120

ISO: WGR40 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY GE40R AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.157 Wide

TUNGALOY GE40R AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.157 Wide

ANSI: GE40R AH120

ISO: GE40R AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGR50 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

TUNGALOY WGR50 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.098 Corner Radius 0.197 Wide

ANSI: WGR50 AH120

ISO: WGR50 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY GE50L AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.197 Wide

TUNGALOY GE50L AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.197 Wide

ANSI: GE50L AH120

ISO: GE50L AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGD400 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.157 Wide

TUNGALOY CGD400 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.157 Wide

ANSI: CGD400 AH120

ISO: CGD400 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGD500 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.197 Wide

TUNGALOY CGD500 AH120 Clamp Down Cut Off, Grooving,Groove Turning Insert AlTiN 0.007 Corner Radius 0.197 Wide

ANSI: CGD500 AH120

ISO: CGD500 AH120

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFL12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEFL12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEFL12-6T04

ISO: CTEFL12-6T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFL12-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEFL12-4T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEFL12-4T04

ISO: CTEFL12-4T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY CTEFR12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

TUNGALOY CTEFR12-6T04 Clamp Down Cut Off,Grooving,Groove Turning Stick Tool Steel Square 0.750 Shank

ANSI: CTEFR12-6T04

ISO: CTEFR12-6T04

Call (262) 251-4020 for pricing
Picture of TUNGALOY D60-L808-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 2.362 Shank

TUNGALOY D60-L808-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 2.362 Shank

ANSI: D60-L808-10D-C

ISO: D60-L808-10D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D60-L628-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 2.362 Shank

TUNGALOY D60-L628-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 2.362 Shank

ANSI: D60-L628-7D-C

ISO: D60-L628-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D50-L668-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.968 Shank

TUNGALOY D50-L668-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.968 Shank

ANSI: D50-L668-10D-C

ISO: D50-L668-10D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D50-L518-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.968 Shank

TUNGALOY D50-L518-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.968 Shank

ANSI: D50-L518-7D-C

ISO: D50-L518-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D40-L528-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.574 Shank

TUNGALOY D40-L528-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.574 Shank

ANSI: D40-L528-10D-C

ISO: D40-L528-10D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D40-L408-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.574 Shank

TUNGALOY D40-L408-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.574 Shank

ANSI: D40-L408-7D-C

ISO: D40-L408-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D32-L416-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.259 Shank

TUNGALOY D32-L416-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.259 Shank

ANSI: D32-L416-10D-C

ISO: D32-L416-10D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D32-L320-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.259 Shank

TUNGALOY D32-L320-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 1.259 Shank

ANSI: D32-L320-7D-C

ISO: D32-L320-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D25-L330-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.984 Shank

TUNGALOY D25-L330-10D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.984 Shank

ANSI: D25-L330-10D-C

ISO: D25-L330-10D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY D25-L255-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.984 Shank

TUNGALOY D25-L255-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.984 Shank

ANSI: D25-L255-7D-C

ISO: D25-L255-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY G20-L260-10D-E Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.787 Shank

TUNGALOY G20-L260-10D-E Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.787 Shank

ANSI: G20-L260-10D-E

ISO: G20-L260-10D-E

Call (262) 251-4020 for pricing
Picture of TUNGALOY D20-L200-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.787 Shank

TUNGALOY D20-L200-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.787 Shank

ANSI: D20-L200-7D-C

ISO: D20-L200-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY G16-L204-10D-E Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.629 Shank

TUNGALOY G16-L204-10D-E Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.629 Shank

ANSI: G16-L204-10D-E

ISO: G16-L204-10D-E

Call (262) 251-4020 for pricing
Picture of TUNGALOY D16-L156-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.629 Shank

TUNGALOY D16-L156-7D-C Replacable Head Grooving,Goove Turning,Groove Threading Boring Bar Steel Round 0.629 Shank

ANSI: D16-L156-7D-C

ISO: D16-L156-7D-C

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TBK-32L Quick Change Grooving,Goove Turning,Groove Threading Blade Holder Steel PSC "Capto Type" 2.362 Shank

TUNGALOY C6TBK-32L Quick Change Grooving,Goove Turning,Groove Threading Blade Holder Steel PSC "Capto Type" 2.362 Shank

ANSI: C6TBK-32L

ISO: C6TBK-32L

Call (262) 251-4020 for pricing
Picture of SANDVIK N123K2-0600-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123K2-0600-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123K2-0600-0004-TF 4325

ISO: N123K2-0600-0004-TF 4325

Call (262) 251-4020 for pricing
Picture of SANDVIK N123J2-0500-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123J2-0500-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123J2-0500-0004-TF 4325

ISO: N123J2-0500-0004-TF 4325

Call (262) 251-4020 for pricing
Picture of SANDVIK N123H2-0400-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123H2-0400-0004-TF 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123H2-0400-0004-TF 4325

ISO: N123H2-0400-0004-TF 4325

Call (262) 251-4020 for pricing
Picture of SANDVIK N123F2-0250-0002-CM 4325 Grooving,Groove Turning Insert Clamp Down

SANDVIK N123F2-0250-0002-CM 4325 Grooving,Groove Turning Insert Clamp Down

ANSI: N123F2-0250-0002-CM 4325

ISO: N123F2-0250-0002-CM 4325

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123J22-2525B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123J22-2525B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123J22-2525B

ISO: RF123J22-2525B

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123H051-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123H051-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123H051-10B

ISO: RF123H051-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123J22-2525B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123J22-2525B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123J22-2525B

ISO: LF123J22-2525B

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123H051-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123H051-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123H051-10B

ISO: LF123H051-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK MAFL 3 020 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MAFL 3 020 1105 Grooving,Groove Turning Insert On Edge

ANSI: MAFL 3 020 1105

ISO: MAFL 3 020 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MAFL 3 005 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MAFL 3 005 1105 Grooving,Groove Turning Insert On Edge

ANSI: MAFL 3 005 1105

ISO: MAFL 3 005 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MACL 3 200-T 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MACL 3 200-T 1105 Grooving,Groove Turning Insert On Edge

ANSI: MACL 3 200-T 1105

ISO: MACL 3 200-T 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MACL 3 200-L 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MACL 3 200-L 1105 Grooving,Groove Turning Insert On Edge

ANSI: MACL 3 200-L 1105

ISO: MACL 3 200-L 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MACL 3 150-L 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MACL 3 150-L 1105 Grooving,Groove Turning Insert On Edge

ANSI: MACL 3 150-L 1105

ISO: MACL 3 150-L 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MACL 3 100-T 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MACL 3 100-T 1105 Grooving,Groove Turning Insert On Edge

ANSI: MACL 3 100-T 1105

ISO: MACL 3 100-T 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK MABL 3 003 1105 Grooving,Groove Turning Insert On Edge

SANDVIK MABL 3 003 1105 Grooving,Groove Turning Insert On Edge

ANSI: MABL 3 003 1105

ISO: MABL 3 003 1105

Call (262) 251-4020 for pricing
Picture of SANDVIK RG123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RG123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RG123K032-12C

ISO: RG123K032-12C

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123K032-12C

ISO: LF123K032-12C

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123K032-12C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123K032-12C

ISO: RF123K032-12C

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123K08-2020C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123K08-2020C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123K08-2020C

ISO: LF123K08-2020C

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123K08-2020C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123K08-2020C Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123K08-2020C

ISO: RF123K08-2020C

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-LF123D067-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-LF123D067-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-LF123D067-10B

ISO: QS-LF123D067-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-LF123D032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-LF123D032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-LF123D032-10B

ISO: QS-LF123D032-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-RF123D067-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-RF123D067-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-RF123D067-10B

ISO: QS-RF123D067-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-RF123D032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-RF123D032-10B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-RF123D032-10B

ISO: QS-RF123D032-10B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-LF123D17-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-LF123D17-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-LF123D17-1616B

ISO: QS-LF123D17-1616B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-LF123D08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-LF123D08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-LF123D08-1616B

ISO: QS-LF123D08-1616B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-RF123D17-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-RF123D17-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-RF123D17-1616B

ISO: QS-RF123D17-1616B

Call (262) 251-4020 for pricing
Picture of SANDVIK QS-RF123D08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK QS-RF123D08-1616B Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: QS-RF123D08-1616B

ISO: QS-RF123D08-1616B

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-L123L50A-HP, CoroCut 1-2 Head for Grooving, 18mm LF

SANDVIK SL70-L123L50A-HP, CoroCut 1-2 Head for Grooving, 18mm LF

ANSI: SL70-L123L50A-HP

ISO: SL70-L123L50A-HP

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-L123L35A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-L123L35A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-L123L35A-HP-M

ISO: SL70-L123L35A-HP-M

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-R123L35A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-R123L35A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-R123L35A-HP-M

ISO: SL70-R123L35A-HP-M

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-L123K30A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-L123K30A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-L123K30A-HP-M

ISO: SL70-L123K30A-HP-M

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-R123K30A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-R123K30A-HP-M Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-R123K30A-HP-M

ISO: SL70-R123K30A-HP-M

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-L123K45A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-L123K45A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-L123K45A-HP

ISO: SL70-L123K45A-HP

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-R123K45A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-R123K45A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-R123K45A-HP

ISO: SL70-R123K45A-HP

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-L123H30A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-L123H30A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-L123H30A-HP

ISO: SL70-L123H30A-HP

Call (262) 251-4020 for pricing
Picture of SANDVIK SL70-R123H30A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK SL70-R123H30A-HP Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: SL70-R123H30A-HP

ISO: SL70-R123H30A-HP

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123H087-16D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123H087-16D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123H087-16D

ISO: LF123H087-16D

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123H087-12D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123H087-12D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123H087-12D

ISO: LF123H087-12D

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123H087-16D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123H087-16D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123H087-16D

ISO: RF123H087-16D

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123H087-12D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123H087-12D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123H087-12D

ISO: RF123H087-12D

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123H22-2525D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123H22-2525D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123H22-2525D

ISO: LF123H22-2525D

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123H22-2020D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123H22-2020D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123H22-2020D

ISO: LF123H22-2020D

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123H22-2020D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123H22-2020D Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123H22-2020D

ISO: RF123H22-2020D

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123D032-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123D032-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123D032-10B-S

ISO: LF123D032-10B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123D067-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123D067-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123D067-10B-S

ISO: RF123D067-10B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123D032-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123D032-10B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123D032-10B-S

ISO: RF123D032-10B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123D17-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123D17-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123D17-1616B-S

ISO: LF123D17-1616B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK LF123D08-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK LF123D08-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: LF123D08-1616B-S

ISO: LF123D08-1616B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123D17-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123D17-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123D17-1616B-S

ISO: RF123D17-1616B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK RF123D08-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

SANDVIK RF123D08-1616B-S Cut Off & Grooving Cut Off,Grooving,Groove Turning Stick Tool

ANSI: RF123D08-1616B-S

ISO: RF123D08-1616B-S

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R151.3-13-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.3-13-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.3-13-60

ISO: 570-32R151.3-13-60

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R151.3-10-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.3-10-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.3-10-40

ISO: 570-32R151.3-10-40

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40L123K18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40L123K18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40L123K18B

ISO: 570-40L123K18B

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40L123J18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40L123J18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40L123J18B

ISO: 570-40L123J18B

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40L123H23B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40L123H23B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40L123H23B

ISO: 570-40L123H23B

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R151.3-08-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.3-08-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.3-08-30

ISO: 570-32R151.3-08-30

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40R151.3-12-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40R151.3-12-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40R151.3-12-60

ISO: 570-40R151.3-12-60

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40R151.3-09-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40R151.3-09-50 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40R151.3-09-50

ISO: 570-40R151.3-09-50

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40R151.3-09-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40R151.3-09-40 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40R151.3-09-40

ISO: 570-40R151.3-09-40

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R151.3-08-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R151.3-08-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R151.3-08-20

ISO: 570-32R151.3-08-20

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R123J18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R123J18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R123J18B

ISO: 570-32R123J18B

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32R123H23B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32R123H23B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32R123H23B

ISO: 570-32R123H23B

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40L151.3-12-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40L151.3-12-60 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40L151.3-12-60

ISO: 570-40L151.3-12-60

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40L151.3-06-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40L151.3-06-30 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40L151.3-06-30

ISO: 570-40L151.3-06-30

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32L151.3-08-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32L151.3-08-20 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32L151.3-08-20

ISO: 570-32L151.3-08-20

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-32L151.3-07-25 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-32L151.3-07-25 Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-32L151.3-07-25

ISO: 570-32L151.3-07-25

Call (262) 251-4020 for pricing
Picture of SANDVIK 570-40R123K18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

SANDVIK 570-40R123K18B Cut Off & Grooving Grooving,Groove Turning Adapter Blade

ANSI: 570-40R123K18B

ISO: 570-40R123K18B

Call (262) 251-4020 for pricing