Picture of Emuge C1069401.0276 Tap Mod Bottom M10-1.00mm 6H Metric DIN/DIn Coolant HSSE TiCN

Emuge C1069401.0276 Tap Mod Bottom M10-1.00mm 6H Metric DIN/DIn Coolant HSSE TiCN

Part Number: EMUC1069401.0276 ISO: C1069401.0276
Looking for alternatives…
Find a drill for this tap M10 × 1.00MM
% of thread 75%
Target drill —
Drill products available across the % thread range 0 drills
50% 90%
Closest drill
—
View this drill →
Heads up: the drill list shows every drill within ±5% thread of your selection (so diameters vary across that band). Pick a drill closer to the target for higher % thread, or a larger one for easier tapping at lower %.

Need Assistance or Service? Please call 262-251-4020

Manufacturer:
SKU: 1156135
Vendor: Sussex Tool and Supply
$166.99

Description

EMUGE C1069401.0276 M10x1.00MM Cut Straight Flute Mod Bottom 2.0P-3.0P HSSE TiCN 6H Metric Steel Titanium Carbo-Nitride (TiCN) has the highest lubricitiy of all the TiN coatings - making it an excellent choice as a dry film lubricant where improved hardness and wear resistance beyond standard Calico TiN is needed. TiCN is normally applied to steels, hardened steel, and stainless steel materials. TiCN is an excellent coating when working against bronze, brass and plastic, therefore, it a good choice for stamping, punching, and forming. Can be stripped and recoated.
Products specifications
Attribute name Attribute value
General Information
Shipping State MASSACHUSETTS
Made In USA NO
Cutter Type Tapping
Coolant Thru Thru Coolant
Type Of Tool Tap
Length Type STANDARD
Thread Type METRIC
Flute Direction STRAIGHT
Tap Style Cut Straight Flute
Tap Type Mod Bottom
Tap Chamfer 2.0P-3.0P
Dimensions & Sizing
Overall Length 3.5433 90.00MM
Shank/Pilot Dia 0.3810 9.68MM
Thread Pitch 1.00MM
Thread Size M10
Tap Drill Range 0.3528 8.96MM - 0.3630 9.22MM
Tap Square 0.2860
Performance & Capacity
Cut Rating Gray Iron, Ductile Iron
Performance Rating High Performance
Tolerances & Accuracy
Thread Limit 6H
Materials & Finish
Tool Material Steel
Cutting Edge Mat HSSE
Coating TICN
Standards & Identification
Dimension Standard DIN/DIN
Only registered users can write reviews