Picture of Emuge BU459611.5036 Tap No.3-56.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P HSS HSSE TiCN

Emuge BU459611.5036 Tap No.3-56.00TPI Mod Bottom NF/UNF/UNEF DINSI 2.0P-3.0P HSS HSSE TiCN

Part Number: EMUBU459611.5036 ISO: BU459611.5036
Looking for alternatives…
Find a drill for this tap No.3 × 56.00TPI
% of thread 75%
Target drill —
Drill products available across the % thread range 0 drills
50% 90%
Closest drill
—
View this drill →
Heads up: the drill list shows every drill within ±5% thread of your selection (so diameters vary across that band). Pick a drill closer to the target for higher % thread, or a larger one for easier tapping at lower %.

Need Assistance or Service? Please call 262-251-4020

Manufacturer:
SKU: 1159682
Vendor: Sussex Tool and Supply
$86.11

Description

EMUGE BU459611.5036 No.3x56.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE TiCN 3B NF/UNF/UNEF Steel Titanium Carbo-Nitride (TiCN) has the highest lubricitiy of all the TiN coatings - making it an excellent choice as a dry film lubricant where improved hardness and wear resistance beyond standard Calico TiN is needed. TiCN is normally applied to steels, hardened steel, and stainless steel materials. TiCN is an excellent coating when working against bronze, brass and plastic, therefore, it a good choice for stamping, punching, and forming. Can be stripped and recoated.
Products specifications
Attribute name Attribute value
General Information
Shipping State MASSACHUSETTS
Made In USA NO
Cutter Type Tapping
Coolant Thru Non Coolant
Type Of Tool Tap
Length Type STANDARD
Thread Type NF/UNF/UNEF
Tap Style Cut Spiral Flute
Tap Type Mod Bottom
Tap Chamfer 2.0P-3.0P
Dimensions & Sizing
Overall Length 1.9700 50.04MM
Shank/Pilot Dia 0.1410 3.58MM
Flutes/Inserts 2
Thread Pitch 56.00TPI
Thread Size No.3
Tap Drill Range 0.0803 2.04MM - 0.0850 2.16MM
Tap Square 0.1100
Performance & Capacity
Cut Rating High Temp, Inconel, Titanium
Performance Rating High Performance
Tolerances & Accuracy
Thread Limit 3B
Materials & Finish
Tool Material Steel
Cutting Edge Mat HSSE
Coating TICN
Standards & Identification
Dimension Standard DINSI
Only registered users can write reviews