ANSI: TPHT32.51 UEN DPP30GT
ISO: TPHT16T304 UEN DPP30GT
Share This:
First Choice: For General Application of Steel & Alloy Steel, Stainless Steel, Cast Iron, with Small Depth of Cut and Low Feed per Revolution at Medium/High SFM (Vc), Light interrupted Cut, Wet Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
For general turning applications at a medium SFM. Use inserts to cut Alloy Steel and Stainless Steel. Inserts have a thermal deformative and abrasive resistant substrate with a single layer PVD TiN coating
