ANSI: TPGX 32.52 UEFR DUP25GT
ISO: TPGX16T308 UEFR DUP25GT
Share This:
First Choice: For Precision Finishing Application of High Temp and Super Alloys, Multi Materials, with Small Depth of Cut and Low Feed per Revolution at Medium SFM (Vc), Light interrupted Cut, Wet Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
First Choice: For universal turning applications at a high SMF (Vc). Tough, hard and impact resistant substrate, the PVD TiAlN/WC/C Coating improves cutting performance and insert life. (Life Inter rupted Cuts) Best for Super Alloys, Aluminum, Ferrous and Non Ferrous materials
