ANSI: TPG322 UEN DNP25GT
ISO: TPG160308 UEN DNP25GT
Share This:
First Choice: For General Application of Aluminum, Stainless Steel, Hardened Steel, with Small Depth of Cut and Low Feed per Revolution at Low SFM (Vc), Light interrupted Cut, Wet Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
For general turning applications at a high SFM. Use inserts to cut all non Ferrous materials including Aluminum and Plastic. Inserts have A PVD TiN coating and a hard, tough, shock resistant, micro-grained substrate with a hard cutting edge for interrupted cuts.
