ANSI: SCGT-431-UEU-DUP15VT
ISO: SCGT-120404-UEU-DUP15VT
Share This:
First Choice: For General Application of High Temp and Super Alloys, Multi Materials, with Small Depth of Cut and Low Feed per Revolution at High SFM (Vc), Brittle! Not for interrupted Cut, Dry Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
For finishing turning applications at a very high SFM. Use inserts to cut all Ferrous and non Ferrous materials including all High Temp Super Alloys. Inserts have a very hard, wear and high abrasive resistant substrate with a PVD AlCrN Coating.
