ANSI: CCMW432-KEU-DKU10HT
ISO: CCMW120408-KEU-DKU10HT
Share This:
First Choice: For Universal Application of Cast Iron, Aluminum, with Medium Depth of Cut and Medium Feed per Revolution at High SFM (Vc), Brittle! Not for interrupted Cut, Wet/Dry Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
For turning applications at a low SFM on up to 65 HRC hardened steel. Inserts have an uncoated wear resistant substrate and cutting edge.
